Provided by: lvm2_2.03.22-1ubuntu2_amd64 
NAME
vgsplit — Move physical volumes into a new or existing volume group
SYNOPSIS
vgsplit option_args position_args
[ option_args ]
DESCRIPTION
vgsplit moves one or more PVs from a source VG (the first VG arg) to a destination VG (the second VG
arg). The PV(s) to move are named after the source and destination VGs, or an LV is named, in which case
the PVs underlying the LV are moved.
If the destination VG does not exist, a new VG is created (command options can be used to specify
properties of the new VG, also see vgcreate(8)).
LVs cannot be split between VGs; each LV must be entirely on the PVs in the source or destination VG.
vgsplit can only move complete PVs. (See pvmove(8) for moving part of a PV.)
USAGE
Split a VG by specified PVs.
vgsplit VG VG PV ...
[ COMMON_OPTIONS ]
Split a VG by PVs in a specified LV.
vgsplit -n|--name LV VG VG
[ COMMON_OPTIONS ]
Common options for command:
[ -A|--autobackup y|n ]
[ -l|--maxlogicalvolumes Number ]
[ -p|--maxphysicalvolumes Number ]
[ -M|--metadatatype lvm2 ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit ]
[ --poolmetadataspare y|n ]
[ --[vg]metadatacopies all|unmanaged|Number ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to allocate Physical Extents (PEs) from the
VG. Each VG and LV has an allocation policy which can be changed with vgchange/lvchange, or over‐
ridden on the command line. normal applies common sense rules such as not placing parallel
stripes on the same PV. inherit applies the VG policy to an LV. contiguous requires new PEs be
placed adjacent to existing PEs. cling places new PEs on the same PV as existing PEs in the same
stripe of the LV. If there are sufficient PEs for an allocation, but normal does not use them,
anywhere will use them even if it reduces performance, e.g. by placing two stripes on the same PV.
Optional positional PV args on the command line can also be used to limit which PVs the command
will use for allocation. See lvm(8) for more information about allocation.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change. Enabling this is strongly
advised! See vgcfgbackup(8) for more information.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more information about
profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings. The String arg uses the
same format as lvm.conf(5), or may use section/field syntax. See lvm.conf(5) for more information
about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file
and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices not listed will ap‐
pear to be missing. This option can be repeated, or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in /etc/lvm/devices/ and is man‐
aged with the lvmdevices(8) command. This overrides the lvm.conf(5) devices/devicesfile and de‐
vices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and debugging.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This information is in addition to information enabled
by the lvm.conf log/journal setting. command: record information about the command. output:
record the default command output. debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information.
--longhelp
Display long help text.
-l|--maxlogicalvolumes Number
Sets the maximum number of LVs allowed in a VG.
-p|--maxphysicalvolumes Number
Sets the maximum number of PVs that can belong to the VG. The value 0 removes any limitation.
For large numbers of PVs, also see options --pvmetadatacopies, and --vgmetadatacopies for improv‐
ing performance.
-M|--metadatatype lvm2
Specifies the type of on-disk metadata to use. lvm2 (or just 2) is the current, standard format.
lvm1 (or just 1) is no longer used.
-n|--name String
Move only PVs used by the named LV.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more devices to find PVs
when hints are not used. The command will still perform standard hint file invalidation where ap‐
propriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect results.
--poolmetadataspare y|n
Enable or disable the automatic creation and management of a spare pool metadata LV in the VG. A
spare metadata LV is reserved space that can be used when repairing a pool.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress
any prompts with answer 'no'.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by disabling all metada‐
ta writing but nevertheless returning success to the calling function. This may lead to unusual
error messages in multi-stage operations if a tool relies on reading back metadata it believes has
changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and
stderr.
--version
Display version information.
--[vg]metadatacopies all|unmanaged|Number
Number of copies of the VG metadata that are kept. VG metadata is kept in VG metadata areas on
PVs in the VG, i.e. reserved space at the start and/or end of the PVs. Keeping a copy of the VG
metadata on every PV can reduce performance in VGs containing a large number of PVs. When this
number is set to a non-zero value, LVM will automatically choose PVs on which to store metadata,
using the metadataignore flags on PVs to achieve the specified number. The number can also be re‐
placed with special string values: unmanaged causes LVM to not automatically manage the PV meta‐
dataignore flags. all causes LVM to first clear the metadataignore flags on all PVs, and then to
become unmanaged.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme
caution. (For automatic no, see -qq.)
VARIABLES
VG Volume Group name. See lvm(8) for valid names.
PV Physical Volume name, a device path under /dev. For commands managing physical extents, a PV po‐
sitional arg generally accepts a suffix indicating a range (or multiple ranges) of physical ex‐
tents (PEs). When the first PE is omitted, it defaults to the start of the device, and when the
last PE is omitted it defaults to end. Start and end range (inclusive): PV[:PE-PE]... Start and
length range (counting from 0): PV[:PE+PE]...
String See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always treated as base two
values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit
is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is
bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB,
e|E is EiB. (This should not be confused with the output control --units, where capital letters
mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can gener‐
ally be substituted for a required VG parameter.
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8),
vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8),
lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7), lvmvdo(7), lvmautoactivation(7)
Red Hat, Inc. LVM TOOLS 2.03.22(2) (2023-08-02) VGSPLIT(8)