NAME

       g32pbm - convert a Group 3 fax file into a portable bitmap

SYNOPSIS

       g32pbm [-reversebits] [-stretch] [g3file]

DESCRIPTION

       Reads  a  Group 3 fax file (raw or digifax) as input. If no filename is given, stdin is used.  Produces a
       portable bitmap as output.

OPTIONS

       -r     Tells g32pbm to interpret bits least-significant first, instead of  the  default  most-significant
              first  ("-reversebits").  Some fax modems do it one way and others do it the other way. If you get
              a whole bunch of "invalid code" messages (nearly one per line), try using this flag.

       -s     Double each horizontal row of the fax file in the pbm file ("-stretch)".   You  can  use  this  to
              adjust the aspect ratio of a "normal resolution" fax file to match that of a "fine resolution" fax
              file.  This might not seem like it belongs here, but it's much faster than using pnmscale|pgmtopbm
              later.   -s  is  activated automatically if the file is specified on the command line and its name
              starts with "fn..." (fax/normal).

       -l(aserjet)
              Instead of a portable bitmap (PBM), output HP laserjet files, suitable for direct printing on a HP
              laserjet or desjket.

       -d <dpi>
              Scale output to <dpi> dots per inch before printing. Normal FAX resolution is  204x196  dpi  (fine
              mode),  or  204x98 dpi (normal mode). In LaerJet mode, only the values 75, 150 and 300 are allowed
              for <dpi>.

       -t     turn image by 90 degrees clockwise. Multiple -t commands increase angle, that is, -t -t will  turn
              it upside down, and so on.

       -?     Print a short command syntax.

REFERENCES

       The standard for Group 3 fax is defined in CCITT Recommendation T.4.

BUGS

       g32pbm  could  be smarter about the image width, at the moment, the maximum width is 1728 pixels, and the
       maximum height is 4300 lines. Everything bigger is just cut off.

       Only 'raw' pbm files are created.

       Scaling is too slow.

       Turning is too slow (and not yet fully implemented either).

SEE ALSO

       pbm2g3(1), pbm(5), g3cat(1), sendfax(8), mgetty(1)

AUTHOR

       g32pbm is Copyright (C) 1993 by Gert Doering, <gert@greenie.muc.de>. It is similar to the g3topbm program
       in Jef Poskanzers pbmplus package, but it's a complete re-write. No code is copied.

greenie                                             27 Oct 93                                          g32pbm(1)