Provided by: virt-p2v_1.42.4-1_amd64 
NAME
virt-p2v - Convert a physical machine to use KVM
SYNOPSIS
virt-p2v
virt-p2v.iso
DESCRIPTION
Virt-p2v converts a physical machine to run virtualized on KVM, managed by libvirt, OpenStack, oVirt, Red
Hat Virtualisation (RHV), or one of the other targets supported by virt-v2v(1).
Normally you don’t run the virt-p2v program directly. Instead you have to boot the physical machine
using the bootable CD-ROM, ISO or PXE image. This bootable image contains the virt-p2v binary and runs
it automatically. Booting from a CD-ROM/etc is required because the disks which are being converted must
be quiescent. It is not safe to try to convert a running physical machine where other programs may be
modifying the disk content at the same time.
This manual page documents running the virt-p2v program. To create the bootable image you should look at
virt-p2v-make-disk(1) or virt-p2v-make-kickstart(1).
NETWORK SETUP
Virt-p2v runs on the physical machine which you want to convert. It has to talk to another server called
the "conversion server" which must have virt-v2v(1) installed on it. It always talks to the conversion
server over SSH:
┌──────────────┐ ┌─────────────────┐
│ virt-p2v │ │ virt-v2v │
│ (physical │ ssh connection │ (conversion │
│ server) ╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍▶ server) │
└──────────────┘ └─────────────────┘
The virt-v2v program on the conversion server does the actual conversion (physical to virtual, and
virtual to virtual conversions are sufficiently similar that we use the same program to do both).
The SSH connection is always initiated from the physical server. All data is transferred over the SSH
connection. In terms of firewall and network configuration, you only need to ensure that the physical
server has access to a port (usually TCP port 22) on the conversion server. Note that the physical
machine may reconnect several times during the conversion process.
The reverse port forwarding feature of ssh (ie. "ssh -R") is required by virt-p2v, and it will not work
if this is disabled on the conversion server. ("AllowTcpForwarding" must be "yes" in the sshd_config(5)
file on the conversion server).
The scp (secure copy) feature of ssh is required by virt-p2v so it can send over small files (this is not
the method by which disks are copied).
The conversion server does not need to be a physical machine. It could be a virtual machine, as long as
it has sufficient memory and disk space to do the conversion, and as long as the physical machine can
connect directly to its SSH port. (See also "Resource requirements" in virt-v2v(1)).
Because all of the data on the physical server’s hard drive(s) has to be copied over the network, the
speed of conversion is largely determined by the speed of the network between the two machines.
GUI INTERACTIVE CONFIGURATION
When you start virt-p2v, you'll see a graphical configuration dialog that walks you through connection to
the conversion server, asks for the password, which local hard disks you want to convert, and other
things like the name of the guest to create and the number of virtual CPUs to give it.
SSH CONFIGURATION DIALOG
When virt-p2v starts up in GUI mode, the first dialog looks like this:
┌─────────────────────────────────────────────────────────────┐
│ virt-p2v │
│ │
│ Conversion server: [____________________________] : [22___] │
│ │
│ User name: [root__________________________________] │
│ │
│ Password: [______________________________________] │
│ │
│ SSH Identity URL: [______________________________________] │
│ │
In the fields above, you must enter the details of the conversion server: the hostname, SSH port number,
remote user name, and either the password or SSH identity (private key) URL. The conversion server must
have an up to date version of virt-v2v.
Normally you must log in to the conversion server as root, but if you check the following box:
│ │
│ [ ] Use sudo when running virt-v2v │
│ │
then you can log in as another user, and virt-p2v will use the sudo(8) command to elevate privileges to
root. Note that sudo must not require a password.
It is also possible to run virt-v2v on the conversion server entirely as non-root, but output modes may
be limited. Consult the virt-v2v(1) manual page for details.
At the bottom of the dialog are these buttons:
│ │
│ [ Test connection ] │
│ │
│ [ Configure network ] [ XTerm ] [ About virt-p2v ] [ Next ] │
│ │
└─────────────────────────────────────────────────────────────┘
You must press the "Test connection" button first to test the SSH connection to the conversion server.
If that is successful (ie. you have supplied the correct server name, user name, password, etc., and a
suitable version of virt-v2v is available remotely) then press the "Next" button to move to the next
dialog.
You can use the "Configure network" button if you need to assign a static IP address to the physical
machine, or use Wifi, bonding or other network features.
The "XTerm" button opens a shell which can be used for diagnostics, manual network configuration, and so
on.
DISK AND NETWORK CONFIGURATION DIALOG
The second configuration dialog lets you configure the details of conversion, including what to convert
and where to send the guest.
In the left hand column, starting at the top, the target properties let you select the name of the guest
(ie. after conversion) and how many virtual CPUs and how much RAM to give it. The defaults come from the
physical machine, and you can usually leave them unchanged:
┌─────────────────────────────────────── ─ ─ ─ ─
│ Target properties:
│
│ Name: [hostname______________]
│
│ # vCPUs: [4_____________________]
│
│ Memory (MB): [16384_________________]
│
The second panel on the left controls the virt-v2v output options. To understand these options it is a
really good idea to read the virt-v2v(1) manual page. You can leave the options at the default to create
a guest as a disk image plus libvirt XML file located in /var/tmp on the conversion host. This is a good
idea if you are a first-time virt-p2v user.
│
│ Virt-v2v output options:
│
│ Output to (-o): [local ▼]
│
│ Output conn. (-oc): [___________________]
│
│ Output storage (-os): [/var/tmp___________]
│
│ Output format (-of): [___________________]
│
│ Output allocation (-oa): [sparse ▼]
│
│ Misc. options (-oo): [___________________]
│
All output options and paths are relative to the conversion server (not to the physical server).
Note that the "Misc. options" text entry behaves differently from the other text entries -- its format is
identical to that of the "p2v.output.misc" kernel command line option. Namely, the text entry contains a
comma-separated list of miscellaneous, output-specific options. (Do not put spaces around the commas!)
Each element in the list is of the form "OPTION=VALUE", and each element is passed to virt-v2v as a
standalone -oo OPTION=VALUE option.
Finally in the left hand column is an information box giving the version of virt-p2v (on the physical
server) and virt-v2v (on the conversion server). You should supply this information when reporting bugs.
In the right hand column are three panels which control what hard disks, removable media devices, and
network interfaces, will be created in the output guest. Normally leaving these at the default settings
is fine.
─ ─ ──────────────────────────────────────────────────┐
Fixed hard disks │
│
Convert Device │
[✔] sda │
1024G HITACHI │
s/n 12345 │
[✔] sdb │
119G HITACHI │
s/n 12346 │
│
Normally you would want to convert all hard disks. If you want virt-p2v to completely ignore a local
hard disk, uncheck it. The hard disk that contains the operating system must be selected. If a hard
disk is part of a RAID array or LVM volume group (VG), then either all hard disks in that array/VG must
be selected, or none of them.
│
Removable media │
│
Convert Device │
[✔] sr0 │
│
If the physical machine has CD or DVD drives, then you can use the Removable media panel to create
corresponding drives on the guest after conversion. Note that any data CDs/DVDs which are mounted in the
drives are not copied over.
At the bottom of the dialog, the "Refresh disks" button instructs virt-p2v to re-enumerate the fixed hard
disks and the removable media drives. (Note that the button will also reset the currently active
selections in both of those panels.) This button is useful in combination with the "XTerm" button on the
"SSH CONFIGURATION DIALOG": in the XTerm window, you can expose further block devices to the kernel (such
as LUNs from iSCSI targets), and the "Refresh disks" button allows virt-p2v to learn about all the block
devices again.
│
Network interfaces │
│
Convert Device Connect to virtual network │
[✔] em1 [default________________________] │
[ ] wlp3s0 [default________________________] │
│
In the Network interfaces panel, select the network interfaces that should be created in the guest after
conversion. You can also connect these to target hypervisor networks (for further information about this
feature, see "Networks and bridges" in virt-v2v(1)).
On supported hardware, left-clicking on the device name (eg. "em1") causes a light to start flashing on
the physical interface, allowing the interface to be identified by the operator.
When you are ready to begin the conversion, press the "Start conversion" button:
│
[ Back ] [ Refresh disks ] [ Start conversion ] │
│
─ ─ ──────────────────────────────────────────────────┘
CONVERSION RUNNING DIALOG
When conversion is running you will see this dialog:
┌────────────────────────────────────────────────────────┐
│ virt-p2v │
│ │
│ ┌──────────────────────────────────────────────────┐ │
│ │ ▲│ │
│ │ │ │
│ │ │ │
∼ ∼ ∼ ∼
│ │ │ │
│ │ │ │
│ │ ▼│ │
│ └──────────────────────────────────────────────────┘ │
│ │
│ Log files ... to /tmp/virt-p2v-xxx │
│ │
│ Doing conversion ... │
│ │
│ [ Cancel conversion ] │
│ │
└────────────────────────────────────────────────────────┘
In the main scrolling area you will see messages from the virt-v2v process.
Below the main area, virt-p2v shows you the location of the directory on the conversion server that
contains log files and other debugging information. Below that is the current status and a button for
cancelling conversion.
Once conversion has finished, you should shut down the physical machine. If conversion is successful,
you should never reboot it.
KERNEL COMMAND LINE CONFIGURATION
If you don’t want to configure things using the graphical UI, an alternative is to configure through the
kernel command line. This is especially convenient if you are converting a lot of physical machines
which are booted using PXE.
Where exactly you set command line arguments depends on your PXE implementation, but for pxelinux you put
them in the "APPEND" field in the pxelinux.cfg file. For example:
DEFAULT p2v
TIMEOUT 20
PROMPT 0
LABEL p2v
KERNEL vmlinuz0
APPEND initrd=initrd0.img [....] p2v.server=conv.example.com p2v.password=secret p2v.o=libvirt
You have to set some or all of the following command line arguments:
p2v.remote.server=SERVER
p2v.server=SERVER
The name or IP address of the conversion server.
This is always required if you are using the kernel configuration method. If virt-p2v does not find
this on the kernel command line then it switches to the GUI (interactive) configuration method.
p2v.remote.port=PORT
p2v.port=PORT
The SSH port number on the conversion server (default: 22).
p2v.auth.username=USERNAME
p2v.username=USERNAME
The SSH username that we log in as on the conversion server (default: "root").
p2v.auth.password=PASSWORD
p2v.password=PASSWORD
The SSH password that we use to log in to the conversion server.
The default is to try with no password. If this fails then virt-p2v will ask the user to type the
password (probably several times during conversion).
This setting is ignored if "p2v.auth.identity.url" is present.
p2v.auth.identity.url=URL
p2v.identity=URL
Provide a URL pointing to an SSH identity (private key) file. The URL is interpreted by curl(1) so
any URL that curl supports can be used here, including "https://" and "file://". For more
information on using SSH identities, see "SSH IDENTITIES" below.
If "p2v.auth.identity.url" is present, it overrides "p2v.auth.password". There is no fallback.
p2v.auth.sudo
p2v.sudo
Use "p2v.sudo" to tell virt-p2v to use sudo(8) to gain root privileges on the conversion server after
logging in as a non-root user (default: do not use sudo).
p2v.guestname=GUESTNAME
p2v.name=GUESTNAME
The name of the guest that is created. The default is to try to derive a name from the physical
machine’s hostname (if possible) else use a randomly generated name.
p2v.vcpu.phys_topo
Copy the physical machine's complete CPU topology (sockets, cores and threads) to the guest.
Disabled by default. If disabled, the "p2v.vcpu.cores" setting takes effect.
p2v.vcpu.cores=N
This setting is ignored if "p2v.vcpu.phys_topo" is enabled. Otherwise, it specifies the flat number
of vCPU cores to give to the guest (placing all of those cores into a single socket, and exposing one
thread per core). The default value is the number of online logical processors on the physical
machine.
p2v.memory=n(M|G)
The size of the guest memory. You must specify the unit such as megabytes or gigabytes by using for
example "p2v.memory=1024M" or "p2v.memory=1G".
The default is to use the same amount of RAM as on the physical machine.
p2v.cpu.vendor=VENDOR
The vCPU vendor, eg. "Intel" or "AMD". The default is to use the same CPU vendor as the physical
machine.
p2v.cpu.model=MODEL
The vCPU model, eg. "IvyBridge". The default is to use the same CPU model as the physical machine.
p2v.cpu.acpi
Whether to enable ACPI in the remote virtual machine. The default is to use the same as the physical
machine.
p2v.cpu.apic
Whether to enable APIC in the remote virtual machine. The default is to use the same as the physical
machine.
p2v.cpu.pae
Whether to enable PAE in the remote virtual machine. The default is to use the same as the physical
machine.
p2v.rtc.basis=(unknown|utc|localtime)
Set the basis of the Real Time Clock in the virtual machine. The default is to try to detect this
setting from the physical machine.
p2v.rtc.offset=[+|-]HOURS
The offset of the Real Time Clock from UTC. The default is to try to detect this setting from the
physical machine.
p2v.disks=sda,sdb,...
A list of physical hard disks to convert, for example:
p2v.disks=sda,sdc
The default is to convert all local hard disks that are found.
p2v.removable=sra,srb,...
A list of removable media to convert. The default is to create virtual removable devices for every
physical removable device found. Note that the content of removable media is never copied over.
p2v.interfaces=em1,...
A list of network interfaces to convert. The default is to create virtual network interfaces for
every physical network interface found.
p2v.network_map=interface:target,...
p2v.network=interface:target,...
Controls how network interfaces are connected to virtual networks on the target hypervisor. The
default is to connect all network interfaces to the target "default" network.
You give a comma-separated list of "interface:target" pairs, plus optionally a default target. For
example:
p2v.network=em1:ovirtmgmt
maps interface "em1" to target network "ovirtmgmt".
p2v.network=em1:ovirtmgmt,em2:management,other
maps interface "em1" to "ovirtmgmt", and "em2" to "management", and any other interface that is found
to "other".
p2v.output.type=(libvirt|local|...)
p2v.o=(libvirt|local|...)
Set the output mode. This is the same as the virt-v2v -o option. See "OPTIONS" in virt-v2v(1).
If not specified, the default is "local", and the converted guest is written to /var/tmp.
p2v.output.allocation=(none|sparse|preallocated)
p2v.oa=(none|sparse|preallocated)
Set the output allocation mode. This is the same as the virt-v2v -oa option. See "OPTIONS" in
virt-v2v(1).
p2v.output.connection=URI
p2v.oc=URI
Set the output connection libvirt URI. This is the same as the virt-v2v -oc option. See "OPTIONS"
in virt-v2v(1) and http://libvirt.org/uri.html
p2v.output.format=(raw|qcow2|...)
p2v.of=(raw|qcow2|...)
Set the output format. This is the same as the virt-v2v -of option. See "OPTIONS" in virt-v2v(1).
p2v.output.storage=STORAGE
p2v.os=STORAGE
Set the output storage. This is the same as the virt-v2v -os option. See "OPTIONS" in virt-v2v(1).
If not specified, the default is /var/tmp (on the conversion server).
p2v.output.misc=OPTION=VALUE,...
p2v.oo=OPTION=VALUE,...
Set miscellaneous output option(s) related to the selected output mode. This is the same as the
virt-v2v -oo option; each "OPTION=VALUE" element in the list will be turned into a separate
-oo OPTION=VALUE option on the virt-v2v command line. See "OPTIONS" in virt-v2v(1).
p2v.pre=COMMAND
p2v.pre="COMMAND ARG ..."
Select a pre-conversion command to run. Any command or script can be specified here. If the command
contains spaces, you must quote the whole command with double quotes. The default is not to run any
command.
p2v.post=poweroff
p2v.post=reboot
p2v.post=COMMAND
p2v.post="COMMAND ARG ..."
Select a post-conversion command to run if conversion is successful. This can be any command or
script. If the command contains spaces, you must quote the whole command with double quotes.
If virt-p2v is running as root, and the command line was set from /proc/cmdline (not --cmdline), then
the default is to run the poweroff(8) command. Otherwise the default is not to run any command.
p2v.fail=COMMAND
p2v.fail="COMMAND ARG ..."
Select a post-conversion command to run if conversion fails. Any command or script can be specified
here. If the command contains spaces, you must quote the whole command with double quotes. The
default is not to run any command.
ip=dhcp
Use DHCP for configuring the network interface (this is the default).
SSH IDENTITIES
As a somewhat more secure alternative to password authentication, you can use an SSH identity (private
key) for authentication.
First create a key pair. It must have an empty passphrase:
ssh-keygen -t rsa -N '' -f id_rsa
This creates a private key ("id_rsa") and a public key ("id_rsa.pub") pair.
The public key should be appended to the "authorized_keys" file on the virt-v2v conversion server
(usually to "/root/.ssh/authorized_keys").
For distributing the private key, there are four scenarios from least secure to most secure:
1. Not using SSH identities at all, ie. password authentication.
Anyone who can sniff the PXE boot parameters from the network or observe the password some other way
can log in to the virt-v2v conversion server.
2. SSH identity embedded in the virt-p2v ISO or disk image. In the GUI, use:
│ Password: [ <leave this field blank> ] │
│ │
│ SSH Identity URL: [file:///var/tmp/id_rsa_____________] │
or on the kernel command line:
p2v.identity=file:///var/tmp/id_rsa
The SSH private key can still be sniffed from the network if using standard PXE.
3. SSH identity downloaded from a website. In the GUI, use:
│ Password: [ <leave this field blank> ] │
│ │
│ SSH Identity URL: [https://internal.example.com/id_rsa] │
or on the kernel command line:
p2v.identity=https://internal.example.com/id_rsa
Anyone could still download the private key and use it to log in to the virt-v2v conversion server,
but you could provide some extra security by configuring the web server to only allow connections
from P2V machines.
Note that ssh-keygen(1) creates the "id_rsa" (private key) file with mode 0600. If you simply copy
the file to a webserver, the webserver will not serve it. It will reply with "403 Forbidden" errors.
You will need to change the mode of the file to make it publicly readable, for example by using:
chmod 0644 id_rsa
4. SSH identity embedded in the virt-p2v ISO or disk image (like 2.), and use of secure PXE, PXE over
separate physical network, or sneakernet to distribute virt-p2v to the physical machine.
Both virt-p2v-make-disk(1) and virt-p2v-make-kickstart(1) have the same option --inject-ssh-identity for
injecting the private key into the virt-p2v disk image / ISO. See also the following manual sections:
"ADDING AN SSH IDENTITY" in virt-p2v-make-disk(1)
"ADDING AN SSH IDENTITY" in virt-p2v-make-kickstart(1)
ACCESSING ISCSI DEVICES
In case the disk that contains the operating system, or other disks that you want to convert, are LUNs of
remote iSCSI targets, follow the steps below so that virt-p2v can learn about said disks. Note that this
procedure depends on the use of the GUI.
The guide below is roughly based on the RHEL9 product documentation.
1. Open a shell in an XTerm window, using the "XTerm" button of the "SSH CONFIGURATION DIALOG".
(Note that the XTerm window(s) persist while you advance to further dialogs in virt-p2v, therefore
it's unnecessary to jump back and forth between virt-p2v dialogs just for entering additional shell
commands in the XTerm window(s).)
2. Using "vi" or another text editor, set the iSCSI initiator name in /etc/iscsi/initiatorname.iscsi,
for example:
InitiatorName=iqn.1994-05.com.redhat:846e82c634
If the file does not exist, create it. (Remember that this file is part of the virt-p2v Live
environment, therefore saving it does not modify any hard disks.)
3. Configure any further iSCSI initiator details completely that are required by the iSCSI target that
you intend to log in to; that is, before you issue the first "iscsiadm" command below. This includes
the CHAP user name and password if the target authenticates the initiator with CHAP, and the reverse
direction CHAP user name and password too, if you want to ascertain the identity of the target on the
initiator as well (this is called "mutual authentication").
Completing the configuration at this stage is important because the first "iscsiadm" command will
start up the "iscsid" service, and configuration changes with that service already running will not
(or may not) take effect until/unless you restart the service using "systemctl".
4. Discover the iSCSI targets offered by the desired host:
iscsiadm -m discovery -t st -p IP_ADDRESS
The command should respond with a two-column list of targets. The symbolic target names are in the
right hand side column, for example:
10.64.24.179:3260,1 iqn.2006-04.example:444
5. Picking an appropriate target from the right hand side column of the previous step's output, log in
to the target:
iscsiadm -m node -T TARGET -l
This command will inform you whether the login attempt was successful.
6. In case the login succeeds, a scan for LUNs on the iSCSI target will commence at once. There are two
pitfalls here. One, dependent on network characteristics, the scan may take several (tens of)
seconds. Two, even if the login succeeds, ACLs on the target may silently prevent the initiator from
seeing particular LUNs -- meaning that no new /dev/sdX nodes will appear. This is why it is
important to get the initiator name (and, potentially, CHAP authentication) correct at the very
beginning of this procedure.
Verify the results of the target scan with the "dmesg" command, and/or with
ls -l /dev/disk/by-path/ip-*-iscsi-*-lun-*
If these symlinks exist, containing the "IP_ADDRESS" from step 4 and the "TARGET" name from step 5 in
their filenames, then the target scan has successfully found the corresponding LUNs.
7. Once the remote LUNs have been successfully enumerated, click the "Refresh disks" button in the "DISK
AND NETWORK CONFIGURATION DIALOG".
COMMON PROBLEMS
Timeouts
As described below (see "HOW VIRT-P2V WORKS") virt-p2v makes several long-lived ssh connections to the
conversion server. If these connections time out then virt-p2v will fail.
To test if a timeout might be causing problems, open an XTerm on the virt-p2v machine, "ssh
root@conversion-server", and leave it for at least an hour. If the session disconnects without you doing
anything, then there is a timeout which you should turn off.
Timeouts happen because:
"TIMEOUT" or "TMOUT" environment variable
Check if one of these environment variables is set in the root shell on the conversion server.
sshd "ClientAlive*" setting
Check for "ClientAlive*" settings in "/etc/ssh/sshd_config" on the conversion server.
Firewall or NAT settings
Check if there is a firewall or NAT box between virt-p2v and the conversion server, and if this
firewall drops idle connections after a too-short time.
virt-p2v ≥ 1.36 attempts to work around firewall timeouts by sending ssh keepalive messages every 5
minutes.
OPTIONS
--help
Display help.
--cmdline=CMDLINE
This is used for debugging. Instead of parsing the kernel command line from /proc/cmdline, parse the
string parameter "CMDLINE".
--colors
--colours
Use ANSI colour sequences to colourize messages. This is the default when the output is a tty. If
the output of the program is redirected to a file, ANSI colour sequences are disabled unless you use
this option.
--iso
This flag is passed to virt-p2v when it is launched inside the virt-p2v ISO environment, ie. when it
is running on a real physical machine (and thus not when testing). It enables various dangerous
features such as the Shutdown popup button.
--test-disk=/PATH/TO/DISK.IMG
For testing or debugging purposes, replace /dev/sda with a local file. You must use an absolute
path. Note that the "Refresh disks" button will be disabled in the "DISK AND NETWORK CONFIGURATION
DIALOG" of the GUI.
-v
--verbose
In libguestfs ≥ 1.33.41, debugging is always enabled on the conversion server, and this option does
nothing.
-V
--version
Display version number and exit.
HOW VIRT-P2V WORKS
Note this section is not normative. We may change how virt-p2v works at any time in the future.
As described above, virt-p2v runs on a physical machine, interrogates the user or the kernel command line
for configuration, and then establishes one or more ssh connections to the virt-v2v conversion server.
The ssh connections are interactive shell sessions to the remote host, but the commands sent are
generated entirely by virt-p2v itself, not by the user. For data transfer, virt-p2v will use the reverse
port forward feature of ssh (ie. "ssh -R").
It will first make one or more test connections, which are used to query the remote version of virt-v2v
and its features. The test connections are closed before conversion begins.
┌──────────────┐ ┌─────────────────┐
│ virt-p2v │ │ virt-v2v │
│ (physical │ control connection │ (conversion │
│ server) ╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍▶ server) │
└──────────────┘ └─────────────────┘
Once virt-p2v is ready to start conversion, it will open a single ssh control connection. It first sends
a mkdir command to create a temporary directory on the conversion server. The directory name is randomly
chosen and is displayed in the GUI. It has the form:
/tmp/virt-p2v-YYYYMMDD-XXXXXXXX
where "YYYYMMDD" is the current date, and the ‘X’s are random characters.
Into this directory are written various files which include:
dmesg
lscpu
lspci
lsscsi
lsusb
(before conversion)
The output of the corresponding commands (ie dmesg(1), lscpu(1) etc) on the physical machine.
The dmesg output is useful for detecting problems such as missing device drivers or firmware on the
virt-p2v ISO. The others are useful for debugging novel hardware configurations.
environment
(before conversion)
The content of the environment where virt-v2v(1) will run.
name
(before conversion)
The name (usually the hostname) of the physical machine.
physical.xml
(before conversion)
Libvirt XML describing the physical machine. It is used to pass data about the physical source host
to virt-v2v(1) via the -i libvirtxml option.
Note this is not "real" libvirt XML (and must never be loaded into libvirt, which would reject it
anyhow). Also it is not the same as the libvirt XML which virt-v2v generates in certain output
modes.
p2v-version
v2v-version
(before conversion)
The versions of virt-p2v and virt-v2v respectively.
status
(after conversion)
The final status of the conversion. 0 if the conversion was successful. Non-zero if the conversion
failed.
time
(before conversion)
The start date/time of conversion.
virt-v2v-conversion-log.txt
(during/after conversion)
The conversion log. This is just the output of the virt-v2v command on the conversion server. If
conversion fails, you should examine this log file, and you may be asked to supply the complete,
unedited log file in any bug reports or support tickets.
virt-v2v-wrapper.sh
(before conversion)
This is the wrapper script which is used when running virt-v2v. For interest only, do not attempt to
run this script yourself.
Before conversion actually begins, virt-p2v then makes one or more further ssh connections to the server
for data transfer.
The transfer protocol used currently is NBD (Network Block Device), which is proxied over ssh. The NBD
server is nbdkit(1), with nbdkit-file-plugin(1) and socket activation.
There is one ssh connection per physical hard disk on the source machine (the common case — a single hard
disk — is shown below):
┌──────────────┐ ┌─────────────────┐
│ virt-p2v │ │ virt-v2v │
│ (physical │ control connection │ (conversion │
│ server) ╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍▶ server) │
│ │ │ │
│ │ data connection │ │
│ ╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍▶ │
│ nbdkit ← ─┘ │ │└─ ← NBD │
│ /dev/sda │ │ requests │
∼ ∼ ∼ ∼
└──────────────┘ └─────────────────┘
Although the ssh data connection is originated from the physical server and terminates on the conversion
server, in fact NBD requests flow in the opposite direction. This is because the reverse port forward
feature of ssh ("ssh -R") is used to open a port on the loopback interface of the conversion server which
is proxied back by ssh to nbdkit running on the physical machine. The effect is that virt-v2v via
libguestfs can open nbd connections which directly read the hard disk(s) of the physical server.
Two layers of protection are used to ensure that there are no writes to the hard disks: Firstly, the
nbdkit -r (readonly) option is used. Secondly libguestfs creates an overlay on top of the NBD connection
which stores writes in a temporary file on the conversion file.
The long "virt-v2v -i libvirtxml physical.xml ..." command is wrapped inside a wrapper script and
uploaded to the conversion server. The final step is to run this wrapper script, in turn running the
virt-v2v command. The virt-v2v command references the physical.xml file (see above), which in turn
references the NBD listening port(s) of the data connection(s).
Output from the virt-v2v command (messages, debugging etc) is saved in the log file on the conversion
server. Only informational messages are sent back over the control connection to be displayed in the
graphical UI.
SEE ALSO
virt-p2v-make-disk(1), virt-p2v-make-kickstart(1), virt-p2v-make-kiwi(1), virt-v2v(1), nbdkit(1),
nbdkit-file-plugin(1), ssh(1), sshd(8), sshd_config(5), http://libguestfs.org/.
AUTHORS
Matthew Booth
John Eckersberg
Richard W.M. Jones http://people.redhat.com/~rjones/
Mike Latimer
Pino Toscano
Tingting Zheng
COPYRIGHT
Copyright (C) 2009-2019 Red Hat Inc.
LICENSE
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see
<https://www.gnu.org/licenses/>.
BUGS
To get a list of bugs against libguestfs (which include virt-p2v), use this link:
https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools
To report a new bug against libguestfs, use this link:
https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools
When reporting a bug, please supply:
• The version of virt-p2v.
• Where you got virt-p2v (eg. which Linux distro, compiled from source, etc)
• Describe the bug accurately and give a way to reproduce it.
virt-p2v-1.42.4 2024-11-30 virt-p2v(1)