Ubuntu Manpage: mkdisk - make a blank emulated floppy or hard disk for xtrs, or add/remove an emulated write-protect tab

Name

       mkdisk - make a blank emulated floppy or hard disk for xtrs, or add/remove an emulated write-protect tab

Synopsis

       mkdisk -1 [-f] filename

       mkdisk [-3] [-f] filename

       mkdisk -k [-s sides] [-d density] [-8] [-i] [-f] filename

       mkdisk -h [-c cyl] [-s sec] [-g gran] [-d dcyl] [-S] [-f] filename

       mkdisk {-p|-u} {-1|-3|-k|-h} filename

Description

The mkdisk program is part of the xtrs package. It has two distinct functions:

• It can make a blank (unformatted) emulated floppy or hard drive in a file.

• With the -p or -u flag, it can turn the write-protect flag on or off for an existing emulated
floppy or hard drive file. See xtrs(1) for background information.

The conventional file extensions are .dsk for emulated floppies and .hdv for “HDV” emulated hard drives,
but mkdisk does not enforce this convention; you can use any filename. Other extensions sometimes used
for emulated floppies are .jv1, .jv3, .8in, and .dmk.

By default, when creating disk image files, and if the system's underlying fopen(3) library function
supports this ISO C11 feature, mkdisk refuses to overwrite an existing file called filename. The -f
(“force”) option overrides this default, “clobbering” filename.

Making Emulated Floppies
With the -1 flag, mkdisk makes an unformatted emulated floppy of type JV1. Besides -f, no additional
flags are accepted.

With the -3 flag (which is the default and should normally be used), mkdisk makes an unformatted emulated
floppy of type JV3. Besides -f, no additional flags are accepted.

With the -k flag, mkdisk makes an unformatted emulated floppy of type DMK. With -k, the optional flags
-s, -d, -8, and -i can be used to give the emulated floppy special properties. Specifying -s1 limits the
floppy to one side; with -s2 (the default), the floppy can be formatted as either one- or two-sided.
Specifying -d1 limits the floppy to single-density; with -d2 (the default), the floppy can be formatted
in either single- or double-density. Specifying -8 allows the floppy to be formatted in an emulated 8"
drive; by default it will work properly only in an emulated 5¼" drive. Setting -s1 or -d1 saves space
after the floppy is formatted; setting -8 consumes additional space. Specifying -i activates a peculiar
feature in some TRS-80 emulators that causes each formatted sector to appear to be both single- and
double-density.

Making Emulated Hard Drives
With the -h flag, mkdisk makes an unformatted emulated hard drive with cyl cylinders, sec sectors, and
gran granules (LDOS allocation units) per cylinder. The hard drive will have cylinder number dcyl marked
for use as its directory.

You will usually want to use the default values for all these parameters. The default is 202 cylinders,
256 sectors per cylinder (that is, 8 heads and 32 sectors per track), and 8 granules per cylinder. This
is the largest hard drive that can be used by all LDOS/LS-DOS operating systems without partitioning the
drive or patching the FORMAT command. The details on what nondefault values are possible vary, depending
on which of xtrs's two hard drive emulations you are using and which other emulators you want to be
compatible with, and it is probably best not to delve into these complexities, but read on if you really
want to.

For cyl, the number of cylinders on the drive, the default value is 202, the minimum is 3, and the
maximum that can be represented in the HDV file's header is 256. You can use 203 cylinders with LDOS and
LS-DOS if you format the drive with Model 4 LS-DOS; a minor bug in Model I/III FORMAT/CMD prevents more
than 202 cylinders from being formatted, but the system can use 203 thereafter. 203 cylinders is the
absolute maximum for LDOS/LS-DOS drivers that do not support partitioning, including the emulator-
specific drivers supplied with xtrs (XTRSHARD/DCT), with Matthew Reed's emulator (HARD/CMD), and with
David Keil's emulator (EHARD/DCT).

In xtrs 4.1 and later, and in David Keil's emulator version 6.0 and later, a true emulation of Radio
Shack's WD1010-based hard disk controller is also available, which works with the native drivers for the
original hardware, such as RSHARDx/DCT and the hard disk drivers for NEWDOS and CP/M. In xtrs, the
WD1010 emulation ignores the maximum number of cylinders specified in the HDV file's header and allows
the driver to format up to 65536 cylinders. This may be useful if your drivers support partitioning (but
why would anyone want to partition an emulated hard drive instead of just making two smaller ones?), or
if your operating system supports more than 203 cylinders per partition. Note that although RSHARDx/DCT
allows up to 406 cylinders per partition, if you use more than 203, the maximum number of sectors per
cylinder is limited to 128, so you gain nothing; the maximum size of a partition is still the same.

For sec, the number of sectors per cylinder, the default value is 256, the maximum is 256, and the
minimum is 4. There are some restrictions on the values that will work. For the greatest portability,
choose a value that is divisible by 32. With xtrs's XTRSHARD/DCT and David Keil's EHARD/DCT, any value
is allowed that can be evenly divided into granules; see the next paragraph. With Matthew Reed's
HARD/CMD, if sec is greater than 32, it must be divisible by 32. With the emulation of a real WD1010 in
newer versions of xtrs (and probably David Keil's emulator too), sec must always be divisible by 32,
because we always emulate a drive with 32 sectors per track and from 1 to 8 heads (tracks per cylinder).
The RSHARDx/DCT driver assumes that there are always 32 sectors per track.

For gran, the default value is 8, the maximum is 8, and the minimum is 1. In addition, it is necessary
that sec be evenly divisible by gran, and that sec÷gran be less than or equal to 32. This value is used
only with the emulator-specific drivers listed above; it is ignored when xtrs is using native hardware
drivers such as RSHARDx/DCT.

The maximum size of a hard drive image is controlled by cyl and sec: it can be at most cyl×sec 256-byte
sectors. The image file starts out small and grows as you write to more cylinders. The allocation
efficiency is controlled by the granule size: LDOS allocates file space in granules. Therefore (1) gran
should always be set as large as possible and (2) reducing sec, thereby making the granules smaller,
reduces space wasted due to fragmentation but limits the maximum size of the drive.

Seeing that the maximum unpartitioned drive size is less than 13 MiB and that the maximum granule size is
only 8 kiB, wasted space should not be much of a concern for most xtrs users. Therefore the default
parameters have been chosen to give you the largest drive possible without partitioning.

Embedding the file name in a hard disk image
Matthew Reed's hard drive image file format contains an eight-character field for storing the filename of
the hard drive image itself. mkdisk simply uses the given filename as this within-image filename. This
works best if filename specifies a short file name in the current working directory. Since modern
operating systems permit filenames much longer than eight characters, historically versions of mkdisk
would deliberately “spill” the remaining characters of filename into the reserved structure field
following the filename (see Technical data, below).

There were two problems with the foregoing approach:

• Modern versions of the standard C library such as glibc will detect the overflow of the
destination buffer, emit a lengthy, technical, frightening diagnostic, and abort the program
immediately. mkdisk itself offered no explanation.

• mkdisk also did not do any checking to see if the filename string copy might overflow the
subsequent buffer, the reserved area.

Now, mkdisk by default writes a truncated (if necessary) copy of filename to the hard disk image file
header; a warning diagnostic is emitted in that event.

With the -S option, mkdisk simulates the old behavior, up to the end of the reserved area. In this
“spill mode”, a warning diagnostic is emitted if spillage occurs, and the program aborts with an error if
the filename is too long to fit in the filename and reserved fields combined.

For maximum portability of your hard drive images, use only ASCII-encoded eight-character filenames in
the current working directory. Omit control characters in the range \x00-\x1f and \x7f. These are not
“8.3” file names; the “.” character, if used, counts toward the eight-character limit.

Write Protection
With the -p flag, mkdisk turns on write protection for an existing emulated floppy or hard drive. It
turns off all Unix write permission bits on the file, and (except for JV1 floppies) also sets a write-
protected flag inside the file.

With the -u flag, mkdisk turns off write protection for an existing emulated floppy or hard drive. It
turns on Unix write permissions to the file, masked by your current umask and the file's current read
permissions. It also clears a write-protected flag inside the file (except on JV1 floppies, which don't
have such a flag).

mkdisk currently does not have code to auto-recognize file formats, so the -p or -u flag must be
accompanied by either -1 (JV1), -3 (JV3), -k (DMK), or -h (hard disk) to identify the file format. There
is also no checking for the correct file format, so if you give the wrong flag, the wrong byte inside
your file will be changed.

Technical data
The JV1 format is just an array of 256-byte sectors, in the order (track 0 sector 0, track 0 sector 1,
... track 0 sector 9, track 1 sector 0, ...). It can represent only single-sided, single-density
floppies. The directory is assumed to be track 17.

The original JV3 format is documented in the printed manual for Jeff Vavasour's commercial Model III/4
emulator. The xtrs implementation includes some extensions.

Full documentation for both JV1 and JV3 can be found in Common File Formats for Emulated TRS-80 Floppy
Disks at Tim Mann's TRS-80 site. A copy of this HTML file is also included in the xtrs distribution.

The DMK format was documented in a file on David Keil's web site, now available via the Internet Archive;
this file is also included with his emulator. Some points are worth bearing in mind, particularly if
you're attempting to work with copy-protected TRS-80 disks:

• If neither the single-density nor the ignore-density option is set and single-density data is
recorded, each single density byte is written twice (i.e., the four bytes 12345678 would be
written as 1212343456567878). This ensures that when single- and double-density sectors are
mixed, each type occupies the correct relative amount of space in the track.

• Bit 15 of an IDAM offset is 1 if the sector is double-density, 0 if single-density. Bit 14 is
reserved; it currently must be 0. The actual offset is in bits 13-0. These offsets are relative
to the start of the track header, they must be in ascending order (I hope!!), and an offset of 0
or 0xffff terminates the list.

An HDV (hard disk) image has the following format. This information is based on email from Matthew Reed.
There is an initial 256-byte header block, followed by an array of sectors. The geometry of the drive is
defined in the header block, which looks like this (from reed.h):

/* Matthew Reed's hard drive format. Thanks to Matthew for providing
documentation. The comments below are copied from his mail
messages, with some additions. */
/* $Id: reed.h,v 1.2 2008/06/26 04:39:56 mann Exp $ */

typedef struct {
Uchar id1; /* 0: Identifier #1: 56H */
Uchar id2; /* 1: Identifier #2: CBH */
Uchar ver; /* 2: Version of format: 10H = version 1.0 */
Uchar cksum; /* 3: Simple checksum:
To calculate, add together bytes 0 to 31
of header (excepting byte 3), then XOR
result with 4CH */
Uchar blks; /* 4: Number of 256 byte blocks in header:
should be 1 */
Uchar mb4; /* 5: Not used, but HDFORMAT sets to 4 */
Uchar media; /* 6: Media type: 0 for hard disk */
Uchar flag1; /* 7: Flags #1:
bit 7: Write protected: 0 for no, 1 for
yes [xtrshard/dct ignores for now]
bit 6: Must be 0
bit 5 - 0: reserved */
Uchar flag2; /* 8: Flags #2: reserved */
Uchar flag3; /* 9: Flags #3: reserved */
Uchar crtr; /* 10: Created by:
14H = HDFORMAT
42H = xtrs mkdisk
80H = Cervasio xtrshard port to Vavasour
M4 emulator */
Uchar dfmt; /* 11: Disk format: 0 = LDOS/LS-DOS */
Uchar mm; /* 12: Creation month: mm */
Uchar dd; /* 13: Creation day: dd */
Uchar yy; /* 14: Creation year: yy (offset from 1900) */
Uchar res1[12]; /* 15 - 26: reserved */
Uchar dparm; /* 27: Disk parameters:
(unused with hard drives)
bit 7: Density: 0 = double, 1 = single
bit 6: Sides: 0 = one side, 1 = 2 sides
bit 5: First sector: 0 if sector 0,
1 if sector 1
bit 4: DAM convention: 0 if normal
(LDOS), 1 if reversed (TRSDOS 1.3)
bit 3 - 0: reserved */
Uchar cyl; /* 28: Number of cylinders per disk */
Uchar sec; /* 29: Number of sectors per track (floppy);
cyl (hard) */
Uchar gran; /* 30: Number of granules per track (floppy);
gran (hard) */
Uchar dcyl; /* 31: Directory cylinder [mkdisk sets to 1;
xtrs ignores] */
char label[32]; /* 32: Volume label: 31 bytes terminated by 0 */
char filename[8]; /* 64 - 71: 8 characters of filename (without
extension) [Cervasio addition. xtrs
actually doesn't limit this to 8
chars or strip the extension] */
Uchar res2[184]; /* 72 - 255: reserved */
} ReedHardHeader;

Authors

       mkdisk was written by Timothy Mann (see http://tim-mann.org/).

       The floppy file formats here called JV1 and JV3 were developed by  Jeff  Vavasour  for  his  MS-DOS-based
       Model  I  and  Model  III/4 emulators (respectively).  They have become a de facto standard in the TRS-80
       emulation community, and much TRS-80 software is available on the Internet in  .dsk  format.   Thanks  to
       Jeff for designing and documenting the formats.

       The  format  here  called  DMK  was  developed by David Keil for his MS-DOS-based Model 4 emulator.  This
       format has the advantage that it can represent essentially everything the  original  TRS-80  floppy  disk
       controllers  can  write,  including  all forms of copy protected disk.  Thanks to David for designing and
       documenting this format.

       The hard drive format was developed by Matthew  Reed  for  his  MS-DOS-based  Model  I/III  and  Model  4
       emulators.   I  have  duplicated his format to allow users to exchange HDV hard drive images between xtrs
       and Matthew's emulators.  Thanks to Matthew for designing the format and providing documentation.

Name

Synopsis

Description

Authors

See also