NAME

       osmotv - http://osmocom-analog.eversberg.eu/docs/

SYNOPSIS

       osmotv -f <frequency> | -c <channel>  <command>

   command:
       tx-fubk
              Transmit FUBK test image (German PAL image)

       tx-ebu Transmit EBU test image (color bars)

       tx-convergence
              Transmit convergence grid for color adjustemnt

       tx-black
              Transmit single color image

       tx-blue
              Transmit single color image

       tx-red Transmit single color image (for DY adjustment)

       tx-magenta
              Transmit single color image

       tx-green
              Transmit single color image

       tx-cyan
              Transmit single color image

       tx-yellow
              Transmit single color image

       tx-white
              Transmit single color image

       tx-vcr Transmit Jolly's VCR test pattern

       tx-img [<image>] Transmit natural image or given image file
              Use 4:3 image with 574 lines for best result.

   general options:

       -h --help

              This help

       --config [~/]<path to config file>

              Give  a config file to use. If it starts with '~/', path is at home dir.  Each line in config file
              is one option, '-' or '--' must not be given!

       -f --frequency <frequency>

              Give frequency in Hertz.

       -c --channel <channel>

              Or give channel number. Special channels start with 's' or 'S'.  Use 'list' to get a channel list.

       -s --samplerate <frequency>

              Give sample rate in Hertz.

       -w --wave-file <filename>

              Output to wave file instead of SDR

       -r --realtime <prio>

              Set prio: 0 to disable, 99 for maximum (default = 0)

   signal options:

       -F --fbas 1 | 0

              Turn color on or off. (default = 1)

       -T --tone 1 | 0

              Turn tone on or off. (default = 1)

   FUBK options:

       -R --circle-radius <radius> | 0

              Use circle radius or 0 for off. (default = 6.7)

       -C --color-bar 1 | 0

              1 == Color bar on, 0 = Show complete middle field. (default = 0) For clean scope signal, also turn
              off circle by setting radius to 0.

       -G --grid-only 1 | 0

              1 == Show only the grid of the test image. (default = 0)

       -I --sation-id "<text>"

              Give exactly 12 characters to display as Station ID.  (default = "Jolly  Roger")

   convergence options:

       -W --grid-width 2 | 1

              Thickness of grid. (default = 0)

       --limesdr

              Auto-select several required options for LimeSDR

       --limesdr-mini

              Auto-select several required options for LimeSDR Mini

   SDR options:

       --sdr-soapy

              Force SoapySDR driver

       --sdr-channel <channel #>

              Give channel number for multi channel SDR device (default = 0)

       --sdr-device-args <args>

       --sdr-stream-args <args>

       --sdr-tune-args <args>

              Optional    SDR    device    arguments,    separated    by    comma     e.g.     --sdr-device-args
              <key>=<value>[,<key>=<value>[,...]]

       --sdr-samplerate <samplerate>

              Sample rate to use with SDR. By default it equals the regular sample rate.

       --sdr-lo-offset <Hz>

              Give  frequency offset in Hz to move the local oscillator away from the target frequency. (default
              = -3000000)

       --sdr-bandwidth <bandwidth>

              Give IF filter bandwidth to use. If not, sample rate is used.

       --sdr-rx-antenna <name>

              SDR device's RX antenna name, use 'list' to get a list

       --sdr-tx-antenna <name>

              SDR device's TX antenna name, use 'list' to get a list

       --sdr-clock-source <name>

              SDR device's clock sourc name, use 'list' to get a list

       --sdr-rx-gain <gain>

              SDR device's RX gain in dB (default = 0.0)

       --sdr-tx-gain <gain>

              SDR device's TX gain in dB (default = 0.0)

       --write-iq-rx-wave <file>

              Write received IQ data to given wave file.

       --write-iq-tx-wave <file>

              Write transmitted IQ data to given wave file.

       --read-iq-rx-wave <file>

              Replace received IQ data by given wave file.

       --read-iq-tx-wave <file>

              Replace transmitted IQ data by given wave file.

       --sdr-swap-links

              Swap RX and TX frequencies for loopback tests over the air.

       --sdr-timestamps 1 | 0

              Use TX timestamps on UHD device. (default = 1)

                                                                                                       osmotv(1)