NAME

       rsparms - Configure the Rose interface.

SYNOPSIS

       rsparms -nodes add|del address[/mask] port neigh [digis...]

       rsparms -nodes list

       rsparms -call <callsign>|none

       rsparms -version

DESCRIPTION

       This program is used to manipulate the routing tables of the Rose network layer. To set up a new route to
       a  Rose node in the routing tables you must use the nodes option. All of the parameters are needed to add
       the node. It is probably best to illustrate with an example:

            rsparms -nodes add 2080192303 144 F1OAT-11

       This creates a new route to a distant node with the address 2080192303 and  the  packets  for  that  node
       should  be  sent  on  AX.25  port  144  to  my  immediate  neighbour  F1OAT-11  without going through any
       digipeaters. For example to set up the same node but via a digipeater I would use:

            rsparms -nodes add 2080192303 144 F1OAT-11 F6PRA-9

       It is also possible to remove a route to a distant node with the same command except that  the  “add”  is
       replaced  by a “del”. The other parameters must also be present. If the node has no other routes then the
       node will be deleted, and the neighbour node that the connections go via may also be deleted if no  other
       node route uses it.

       You may list the configured Rose routes using the following syntax:

            rsparms -nodes list

       This  program  may  also be used to set up a common AX.25 level 2 callsign that will be used for the ROSE
       node. By default no special level 2 callsign is set, but setting it will replace  any  existing  level  2
       callsign  and  register another one. Setting the callsign to “none” will remove the level 2 callsign. For
       example:

            rsparms -call VK2KTJ-10

       would set the callsign used by Rose internode traffic to VK2KTJ-10.

OPTIONS

       -version  Display the version information.

FILES

       /etc/ax25/axports
       /etc/ax25/rsports

SEE ALSO

       call(1), rose(4), axports(5), rsports(5), rsparms(8).

AUTHOR

       Jonathan Naylor G4KLX <g4klx@g4klx.demon.co.uk>

Linux                                             15 July 2011                                        RSPARMS(8)