Provided by: lvm2_2.03.16-3ubuntu3.2_amd64 
NAME
lvs — Display information about logical volumes
SYNOPSIS
lvs
[ option_args ]
[ position_args ]
DESCRIPTION
lvs produces formatted output about LVs.
USAGE
lvs
[ -H|--history ]
[ -a|--all ]
[ -o|--options String ]
[ -S|--select String ]
[ -O|--sort String ]
[ --segments ]
[ --aligned ]
[ --binary ]
[ --configreport log|vg|lv|pv|pvseg|seg ]
[ --foreign ]
[ --ignorelockingfailure ]
[ --logonly ]
[ --nameprefixes ]
[ --noheadings ]
[ --nosuffix ]
[ --readonly ]
[ --reportformat basic|json ]
[ --rows ]
[ --separator String ]
[ --shared ]
[ --unbuffered ]
[ --units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E ]
[ --unquoted ]
[ COMMON_OPTIONS ]
[ VG|LV|Tag ... ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--aligned
Use with --separator to align the output columns
-a|--all
Show information about internal LVs. These are components of normal LVs, such as mirrors, which
are not independently accessible, e.g. not mountable.
--binary
Use binary values "0" or "1" instead of descriptive literal values for columns that have exactly
two valid values to report (not counting the "unknown" value which denotes that the value could
not be determined).
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more information about
profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings. The String arg uses the
same format as lvm.conf(5), or may use section/field syntax. See lvm.conf(5) for more information
about config.
--configreport log|vg|lv|pv|pvseg|seg
See lvmreport(7).
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file
and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices not listed will ap‐
pear to be missing. This option can be repeated, or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in /etc/lvm/devices/ and is man‐
aged with the lvmdevices(8) command. This overrides the lvm.conf(5) devices/devicesfile and de‐
vices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and debugging.
--foreign
Report/display foreign VGs that would otherwise be skipped. See lvmsystemid(7) for more informa‐
tion about foreign VGs.
-h|--help
Display help text.
-H|--history
Include historical LVs in the output. (This has no effect unless LVs were removed while
lvm.conf(5) metadata/record_lvs_history was enabled.
--ignorelockingfailure
Allows a command to continue with read-only metadata operations after locking failures.
--journal String
Record information in the systemd journal. This information is in addition to information enabled
by the lvm.conf log/journal setting. command: record information about the command. output:
record the default command output. debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information.
--logonly
Suppress command report and display only log report.
--longhelp
Display long help text.
--nameprefixes
Add an "LVM2_" prefix plus the field name to the output. Useful with --noheadings to produce a
list of field=value pairs that can be used to set environment variables (for example, in udev
rules).
--noheadings
Suppress the headings line that is normally the first line of output. Useful if grepping the out‐
put.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more devices to find PVs
when hints are not used. The command will still perform standard hint file invalidation where ap‐
propriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect results.
--nosuffix
Suppress the suffix on output sizes. Use with --units (except h and H) if processing the output.
-o|--options String
Comma-separated, ordered list of fields to display in columns. String arg syntax is:
[+|-|#]Field1[,Field2 ...] The prefix + will append the specified fields to the default fields, -
will remove the specified fields from the default fields, and # will compact specified fields (re‐
moving them when empty for all rows.) Use -o help to view the list of all available fields. Use
separate lists of fields to add, remove or compact by repeating the -o option: -o+field1,field2
-o-field3,field4 -o#field5. These lists are evaluated from left to right. Use field name lv_all
to view all LV fields, vg_all all VG fields, pv_all all PV fields, pvseg_all all PV segment
fields, seg_all all LV segment fields, and pvseg_all all PV segment columns. See the lvm.conf(5)
report section for more config options. See lvmreport(7) for more information about reporting.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress
any prompts with answer 'no'.
--readonly
Run the command in a special read-only mode which will read on-disk metadata without needing to
take any locks. This can be used to peek inside metadata used by a virtual machine image while the
virtual machine is running. No attempt will be made to communicate with the device-mapper kernel
driver, so this option is unable to report whether or not LVs are actually in use.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the report/output_format
setting in lvm.conf(5). basic is the original format with columns and rows. If there is more
than one report per command, each report is prefixed with the report name for identification. json
produces report output in JSON format. See lvmreport(7) for more information.
--rows
Output columns as rows.
--segments
Use default columns that emphasize segment information.
-S|--select String
Select objects for processing and reporting based on specified criteria. The criteria syntax is
described by --select help and lvmreport(7). For reporting commands, one row is displayed for
each object matching the criteria. See --options help for selectable object fields. Rows can be
displayed with an additional "selected" field (-o selected) showing 1 if the row matches the se‐
lection and 0 otherwise. For non-reporting commands which process LVM entities, the selection is
used to choose items to process.
--separator String
String to use to separate each column. Useful if grepping the output.
--shared
Report/display shared VGs that would otherwise be skipped when lvmlockd is not being used on the
host. See lvmlockd(8) for more information about shared VGs.
-O|--sort String
Comma-separated ordered list of columns to sort by. Replaces the default selection. Precede any
column with - for a reverse sort on that column.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by disabling all metada‐
ta writing but nevertheless returning success to the calling function. This may lead to unusual
error messages in multi-stage operations if a tool relies on reading back metadata it believes has
changed but hasn't.
--unbuffered
Produce output immediately without sorting or aligning the columns properly.
--units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
All sizes are output in these units: human-(r)eadable with '<' rounding indicator, (h)uman-read‐
able, (b)ytes, (s)ectors, (k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes, (p)etabytes,
(e)xabytes. Capitalise to use multiples of 1000 (S.I.) instead of 1024. Custom units can be
specified, e.g. --units 3M.
--unquoted
When used with --nameprefixes, output values in the field=value pairs are not quoted.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and
stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme
caution. (For automatic no, see -qq.)
VARIABLES
VG Volume Group name. See lvm(8) for valid names.
LV Logical Volume name. See lvm(8) for valid names. An LV positional arg generally includes the VG
name and LV name, e.g. VG/LV.
Tag Tag name. See lvm(8) for information about tag names and using tags in place of a VG, LV or PV.
String See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always treated as base two
values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit
is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is
bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB,
e|E is EiB. (This should not be confused with the output control --units, where capital letters
mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can gener‐
ally be substituted for a required VG parameter.
NOTES
The lv_attr bits are:
1 Volume type: (C)ache, (m)irrored, (M)irrored without initial sync, (o)rigin, (O)rigin with merging
snapshot, (r)aid, (R)aid without initial sync, (s)napshot, merging (S)napshot, (p)vmove, (v)irtual,
mirror or raid (i)mage, mirror or raid (I)mage out-of-sync, mirror (l)og device, under (c)onversion,
thin (V)olume, (t)hin pool, (T)hin pool data, v(d)o pool, v(D)o pool data, raid or pool m(e)tadata or
pool metadata spare.
2 Permissions: (w)riteable, (r)ead-only, (R)ead-only activation of non-read-only volume
3 Allocation policy: (a)nywhere, (c)ontiguous, (i)nherited, c(l)ing, (n)ormal This is capitalised if
the volume is currently locked against allocation changes, for example during pvmove(8).
4 fixed (m)inor
5 State: (a)ctive, (h)istorical, (s)uspended, (I)nvalid snapshot, invalid (S)uspended snapshot, snapshot
(m)erge failed, suspended snapshot (M)erge failed, mapped (d)evice present without tables, mapped de‐
vice present with (i)nactive table, thin-pool (c)heck needed, suspended thin-pool (C)heck needed, (X)
unknown
6 device (o)pen, (X) unknown
7 Target type: (C)ache, (m)irror, (r)aid, (s)napshot, (t)hin, (u)nknown, (v)irtual. This groups logical
volumes related to the same kernel target together. So, for example, mirror images, mirror logs as
well as mirrors themselves appear as (m) if they use the original device-mapper mirror kernel driver;
whereas the raid equivalents using the md raid kernel driver all appear as (r). Snapshots using the
original device-mapper driver appear as (s); whereas snapshots of thin volumes using the new thin pro‐
visioning driver appear as (t).
8 Newly-allocated data blocks are overwritten with blocks of (z)eroes before use.
9 Volume Health, where there are currently three groups of attributes identified:
Common ones for all Logical Volumes: (p)artial, (X) unknown.
(p)artial signifies that one or more of the Physical Volumes this Logical Volume uses is missing from
the system. (X) unknown signifies the status is unknown.
Related to RAID Logical Volumes: (r)efresh needed, (m)ismatches exist, (w)ritemostly.
(r)efresh signifies that one or more of the Physical Volumes this RAID Logical Volume uses had suf‐
fered a write error. The write error could be due to a temporary failure of that Physical Volume or an
indication that it is failing. The device should be refreshed or replaced. (m)ismatches signifies
that the RAID logical volume has portions of the array that are not coherent. Inconsistencies are de‐
tected by initiating a "check" on a RAID logical volume. (The scrubbing operations, "check" and "re‐
pair", can be performed on a RAID logical volume via the 'lvchange' command.) (w)ritemostly signifies
the devices in a RAID 1 logical volume that have been marked write-mostly. Re(s)haping signifies a
RAID Logical Volume is either undergoing a stripe addition/removal, a stripe size or RAID algorithm
change. (R)emove after reshape signifies freed striped raid images to be removed.
Related to Thin pool Logical Volumes: (F)ailed, out of (D)ata space, (M)etadata read only.
(F)ailed is set if thin pool encounters serious failures and hence no further I/O is permitted at all.
The out of (D)ata space is set if thin pool has run out of data space. (M)etadata read only signifies
that thin pool encounters certain types of failures but it's still possible to do reads at least, but
no metadata changes are allowed.
Related to Thin Logical Volumes: (F)ailed.
(F)ailed is set when related thin pool enters Failed state and no further I/O is permitted at all.
Related to writecache logical volumes: (E)rror.
(E)rror is set dm-writecache reports an error.
10 s(k)ip activation: this volume is flagged to be skipped during activation.
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8),
vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8),
lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)
Red Hat, Inc. LVM TOOLS 2.03.16(2) (2022-05-18) LVS(8)