Provided by: groff_1.23.0-3build2_amd64 
Name
groff_mm - memorandum macros for GNU roff
Synopsis
groff -mm [option ...] [file ...]
groff -m mm [option ...] [file ...]
Description
The GNU implementation of the mm macro package is part of the groff document formatting system. The mm
package is suitable for the composition of letters, memoranda, reports, and books.
Call an mm macro at the beginning of a document to initialize the package. A simple mm document might
use only P for paragraphing. Set numbered and unnumbered section headings with H and HU, respectively.
Change the style of the typeface with B, I, and R; you can alternate styles with BI, BR, IB, IR, RB, and
RI. Several nestable list types are available via AL, BL, BVL, DL, ML, RL, and VL; each of these begins
a list, to which LI adds an item and LE ends the (nested) list. Customized list arrangements are
supported by LB. DS and DF start static and floating displays, respectively; either is terminated with
DE.
groff mm is intended to be compatible with the mm implementation found in the AT&T Documenter's Workbench
(DWB), with the following limitations.
• Omitted features include the logo and company name strings, }Z and ]S, respectively; the encoded
company site location addresses recognized as the third argument to the AU macro; the Pv (“private”
heading) register; and the OK (other keywords), and PM (proprietary markings) macros.
• The CS (output cover sheet) macro is implemented only for memorandum type 4.
• The grap preprocessor is not explicitly supported; no G1 and G2 macros are defined.
• The registers A, C, E, T, and U, typically set from the troff or nroff command lines with DWB mm, are
not recognized.
• When setting the registers L or W from the command line, use an explicit scaling unit to avoid
surprises.
• DWB mm's nP macro indented the second line of a paragraph to align it with the start of the text of the
first (after the paragraph number); groff mm's does not.
• Cut marks are not supported.
DWB mm supported only seven levels of heading. As a compatible extension, groff mm supports fourteen,
introducing new registers H8 through H14, and affecting the interpretation of the HF and HP strings.
Macro, register, and string descriptions in this page frequently mention each other; most cross
references are to macros. Where a register or string is referenced, its type is explicitly identified.
mm's macro names are usually in full capitals; registers and strings tend to have mixed-case names.
Document styles
groff mm offers three different frameworks for document organization. COVER/COVEND is a flexible means
of preparing any document requiring a cover page. LT/LO aids preparation of typical Anglophone
correspondence (business letters, for example). The MT memorandum type mechanism implements a group of
formal styles historically used by AT&T Bell Laboratories. Your document can select at most one of these
approaches; when used, each disables the others.
Localization
groff mm is designed to be easily localized. For languages other than English, strings that can appear
in output are collected in the file /usr/share/groff/1.23.0/tmac/xx.tmac, where xx is an ISO 639 two-
letter language identifier. Localization packages should be loaded after mm; for example, you might
format a Swedish mm document with the command “groff -mm -msv”.
This package can also be localized by site or territory; for example, /usr/share/groff/1.23.0/tmac/mse
.tmac illustrates how to adapt the output to a national standard using its ISO 3166 territory code. Such
a package can define a string that causes a macro file /usr/share/groff/1.23.0/tmac/mm/territory_locale
to be loaded at package initialization. If this mechanism is not used, /usr/share/groff/1.23.0/tmac/mm/
locale is loaded instead. No diagnostic is produced if these files do not exist.
Registers and strings
Much mm behavior can be configured by registers and strings. A register is assigned with the nr request.
.nr ident [±]n [i]
ident is the name of the register, and n is the value to be assigned. n can be prefixed with a plus or
minus sign if incrementation or decrementation (respectively) of the register's existing value by n is
desired. If assignment of a (possibly) negative n is required, further prefix it with a zero or enclose
it in parentheses. If i is specified, the register is automatically modified by i prior to interpolation
if a plus or minus sign is included in the escape sequence as follows.
\n[±][ident]
i can be negative; it combines algebraically with the sign in the interpolation escape sequence.
Strings are defined with the ds request.
.ds ident contents
contents consumes everything up to the end of the line, including trailing spaces. It is a good practice
to end contents with a comment escape sequence (\") so that extraneous spaces do not intrude during
document maintenance. To include leading spaces in contents, prefix it with a double quote. Strings are
interpolated with the \* escape sequence.
\*[ident]
Register and string name spaces are distinct, but strings and macros share a name space. Defining a
string with the same name as an mm macro is not supported and may cause incorrect rendering, the emission
of diagnostic messages, and an error exit status from troff.
Register format
A register is interpolated using Arabic numerals if no other format has been assigned to it. Assign a
format to a register with the af request.
.af R c
R is the name of the register, and c is the format. If c is a sequence of Arabic numerals, their
quantity defines a zero-padded minimum width for the interpolated register value.
Form Sequence
1 0, 1, 2, 3, ..., 10, ...
001 000, 001, 002, 003, ..., 1000, ...
i 0, i, ii, iii, iv, ...
I 0, I, II, III, IV, ...
a 0, a, b, c, ..., z, aa, ab, ...
A 0, A, B, C, ..., Z, AA, AB, ...
Fonts
In groff mm, the fonts (or rather, font styles) R (roman), I (italic), and B (bold) are mounted at font
positions 1, 2, and 3, respectively. Internally, font positions are used for backward compatibility.
From a practical point of view, it doesn't make a big difference—a different font family can still be
selected by invoking groff's fam request or using its -f command-line option. On the other hand, if you
want to replace just, for example, font I with Zapf Chancery Medium italic (available on groff's pdf and
ps output devices), you have to use the fp request, replacing the font at position 2 with “.fp 2 ZCMI”).
Because the cover sheet, memorandum type, and refer(1) integration macros explicitly request fonts named
B, I, and R, you will also need to remap these font names with the ftr request, for instance with
“.ftr I ZCMI”.
Macros
An explicitly empty argument may be specified with a pair of double quotes; to call a macro XX with an
empty second argument but non-empty first and third ones, you could input the following.
.XX foo "" baz
Macro names longer than two characters are GNU extensions; some shorter names were not part of DWB mm's
published interface but are documented aspects of groff mm.
)E level text
Add heading text text to the table of contents with level, which is either 0 or in the range 1
to 7. See also H. This undocumented DWB mm macro is exposed by groff mm to enable customized
tables of contents.
1C [1] Format page text in one column. The page is broken. A 1 argument suppresses this break; its use
may cause body text and a pending footnote to overprint. See 2C, MC, and NCOL.
2C Begin two-column formatting. This is a special case of MC. See 1C and NCOL.
AE Abstract end; stop collecting abstract text. See AS.
AF [firm-name]
Specify firm associated with the document. At most one can be declared; the firm name is used by
memorandum types and available to cover sheets. AF terminates a document title started with TL,
and can be called without an argument for that purpose. See MT and COVER.
AL [type [text-indent [1]]]
Begin an auto-incrementing numbered list. Item numbers start at one. The type argument assigns
the register format (see above) of the list item enumerators. The default is 1. An explicitly
empty type also indicates the default. A text-indent argument overrides register Li. A third
argument suppresses the blank line that normally precedes each list item. Use LI to declare list
items, and LE to end the list.
APP [id [title]]
Begin an appendix. If the identifier id is omitted, it is incremented (or initialized, if
necessary). The register format used for id is “A”. The page is broken. The register Aph
determines whether an appendix heading is then formatted. This heading uses the string App
followed by id. Appendices appear in any table of contents (see TC). The string Apptxt is set to
title if the latter is present, and made empty otherwise.
APPSK id n [title]
As APP, but increment the page number by n. Use this macro to “skip pages” when diagrams or other
materials not formatted by troff are included in appendices.
AS [placement [indentation]]
Abstract start; begin collecting abstract. Input up to the next AE call is included in the
abstract. placement influences the location of the abstract on the cover sheet of a memorandum
(see MT). COVER, by contrast, ignores placement by default, but can be customized to interpret
it.
placement Effect
0 The abstract appears on page 1 and cover sheet if the document is a “released paper”
memorandum (“.MT 4”); otherwise, it appears on page 1 without a cover sheet.
1 The abstract appears only on the cover sheet (“.MT 4” only).
An abstract does not appear at all in external letters (“.MT 5”). A placement of 2 was supported
by DWB mm but is not by groff mm.
A second argument increases the indentation by indentation and reduces the line length by twice
this amount. A scaling unit of ens is assumed. The default is 0.
AST [caption]
Set the caption above the abstract to caption, or clear it if there is no argument. The default
is “ABSTRACT”.
AT title ...
Specify author's title(s). If present, AT must appear just after the corresponding author's AU.
Each title occupies an output line beneath the author's name in the signature block used by LT
letters (see SG) and in MT memoranda. The ms cover sheet style also uses it.
AU [name [initials [loc [dept [ext [room [arg1 [arg2 [arg3]]]]]]]]]
Specify author. AU terminates a document title started with TL, and can be called without
arguments for that purpose. Author information is used by cover sheets, MT memoranda, and SG.
Further arguments comprise initials, location, department, telephone extension, room number or
name, and up to three additional items. Repeat AU to identify multiple authors.
Use WA/WE instead to identify the author for documents employing LT.
AV [name [1]]
Format approval lines for a handwritten signature and date. Two horizontal rules are drawn, with
the specified name and the text of the string Letdate beneath them. Above these rules, the text
in the string Letapp is formatted; a second argument replaces this text with a blank line. See
LT.
AVL [name]
As AV, but the date, date rule, and approval notation Letapp are omitted.
B [bold-text [previous-font-text]] ...
Join bold-text in boldface with previous-font-text in the previous font, without space between the
arguments. If no arguments, switch font to bold style.
B1 Begin boxed, kept display. The text is indented one character, and the right margin is one
character shorter. This is a GNU extension.
B2 End boxed, kept display. This is a GNU extension.
BE End bottom block; see BS.
BI [bold-text [italic-text]] ...
Join bold-text in boldface with italic-text in italics, without space between the arguments.
BL [text-indent [1]]
Begin bulleted list. Items are prefixed with a bullet and a space. A text-indent argument
overrides register Pi. A second argument suppresses blank lines between items. Use LI to declare
list items, and LE to end the list.
BR [bold-text [roman-text]] ...
Join bold-text in boldface with roman-text in roman style, without space between the arguments.
BS Begin bottom block. Input is collected until BE is called, and output between the footnote area
and footer of each page.
BVL [text-indent [mark-indent [1]]]
Begin broken variable-item (or “tagged”) list. Each item is expected to supply its own mark. The
line is always broken after the mark; contrast VL. text-indent sets the indentation of the text,
and mark-indent the distance from the current list indentation to the mark. A third argument
suppresses the blank line that normally precedes each list item. Use LI to declare list items,
and LE to end the list.
COVER [style]
Begin a cover page description. COVER must appear before the body text (or main matter) of a
document. The argument style is used to construct the file name /usr/share/groff/1.23.0/tmac/mm/
style.cov and load it with the mso request. The default style is ms; the ms.cov file prepares a
cover page resembling those of the ms package. A .cov file must define a COVEND macro, which a
document must call at the end of the cover description. Use cover description macros in the
following order; only TL and AU are required.
.COVER
.TL
.AF
.AU
.AT
.AS
.AE
.COVEND
COVEND End the cover description.
DE End static or floating display begun with DS or DF.
DF [format [fill [right-indentation]]]
Begin floating display. A floating display is saved in a queue and output in the order entered.
Arguments are handled as in DS. Floating displays cannot be nested. Placement of floating
displays is controlled by the registers De and Df.
DL [text-indent [1]]
Begin dashed list. Items are prefixed with an em dash and a space. A text-indent argument
overrides register Pi. A second argument suppresses blank lines between items. Use LI to declare
list items, and LE to end the list.
DS [format [fill [right-indentation]]]
Begin static display. Input until DE is called is collected into a display. The display is
output on a single page unless it is taller than the height of the page. DS can be nested
(contrast with DF).
format Effect
none Do not indent the display.
L Do not indent the display.
I Indent text by \n[Si].
C Center each line.
CB Center the whole display as a block.
R Right-adjust the lines.
RB Right-adjust the whole display as a block.
The values “L”, “I”, “C”, and “CB” can also be specified as “0”, “1”, “2”, and “3”, respectively,
for compatibility with DWB mm.
fill Effect
none Disable filling.
N Disable filling.
F Enable filling.
“N” and “F” can also be specified as “0” and “1”, respectively, for compatibility with DWB mm.
A third argument reduces the line length by right-indentation.
mm normally places blank lines before and after the display. Set register Ds to 0 to suppress
these.
EC [title [override [flag [refname]]]]
Caption an equation. The caption consists of the string Liec followed by an automatically
incrementing counter stored in the register Ec, punctuation configured by the register Of, then
title (if any). Use the af request to configure Ec's number format. override and flag alter the
equation number as follows. Omitting flag and specifying 0 in its place are equivalent.
flag Effect
0 Prefix number with override.
1 Suffix number with override.
2 Replace number with override.
Equation captions are centered irrespective of the alignment of any enclosing display.
refname stores the equation number using SETR; it can be retreived with “.GETST refname”. This
argument is a GNU extension.
Captioned equations are listed in a table of contents (see TC) if the Boolean register Le is true.
Such a list uses the string Le as a heading.
EF ["'left'center'right'"]
Define the even-page footer, which is formatted just above the normal page footer on even-numbered
pages. See PF. EF defines the string EOPef.
EH ["'left'center'right'"]
Define the even-page header, which is formatted just below the normal page header on even-numbered
pages. See PH. EH defines the string TPeh.
EN End equation input preprocessed by eqn(1); see EQ.
EOP If defined, this macro is called in lieu of normal page footer layout. Headers and footers are
formatted in a separate environment. See TP.
Strings available to EOP
─────────────────────────
EOPf argument to PF
EOPef argument to EF
EOPof argument to OF
EPIC [-L] width height [name]
Draw a box with the given width and height. It also prints the text name or a default string if
name is not specified. This is used to include external pictures; just give the size of the
picture. -L left-aligns the picture; the default is to center. See PIC.
EQ [label]
Start equation input preprocessed by eqn(1). EQ and EN macro calls bracket an equation region.
Such regions must be contained in displays (DS/DE), except when the region is used only to
configure eqn and not to produce output. If present, label appears aligned to the right and
centered vertically within the display; see register Eq. If multiple eqn regions occur within a
display, only the last label (if any) is used.
EX [title [override [flag [refname]]]]
Caption an exhibit. Arguments are handled analogously to EC. The register Ex is the exhibit
counter. The string Liex precedes the exhibit number and any title. Exhibit captions are
centered irrespective of the alignment of any enclosing display.
Captioned exhibits are listed in a table of contents (see TC) if the Boolean register Lx is true.
Such a list uses the string Lx as a heading.
FC [closing-text]
Output the string Letfc, or the specified closing-text, as the formal closing of a letter.
FD [arg [1]]
Configure display of footnotes. The first argument encodes enablement of automatic hyphenation,
adjustment to the right margin, indentation of footnote text, and left- vs. right-alignment of the
footnote label within the space allocated for it.
arg Hyphenate? Adjust? Indent? Label alignment
0 no yes yes left
1 yes yes yes left
2 no no yes left
3 yes no yes left
4 no yes no left
5 yes yes no left
6 no no no left
7 yes no no left
8 no yes yes right
9 yes yes yes right
10 no no yes right
11 yes no yes right
An arg greater than 11 is treated as 0. mm's default is 0.
If a second argument, conventionally 1, is given, footnote numbering is reset when a first-level
heading is encountered. See FS.
FE End footnote; see FS.
FG [title [override [flag [refname]]]]
Caption a figure. Arguments are handled analogously to EC. The register Fg is the figure
counter. The string Lifg precedes the figure number and any title. Figure captions are centered
irrespective of the alignment of any enclosing display.
Captioned figures are listed in a table of contents (see TC) if the Boolean register Lf is true.
Such a list uses the string Lf as a heading.
FS [label]
Start footnote. Input until FE is called is collected into a footnote. By default, footnotes are
automatically numbered starting at 1; the number is available in register :p and, with a trailing
period, in string F. This string precedes the footnote text at the bottom of the column or page.
Footnotes are vertically separated by the product of registers Fs and Lsp. In groff mm, footnotes
may be used in displays.
A label argument replaces the contents of the string F; it need not be numeric. In this event,
the footnote marker in the body text must be explicitly written.
GETHN refname [varname]
Include the heading number where the corresponding “.SETR refname” was placed. This is displayed
as “X.X.X.” in pass 1. See INITR. If varname is used, GETHN sets the string varname to the
heading number.
GETPN refname [varname]
Include the page number where the corresponding “.SETR refname” was placed. This is displayed as
“9999” in pass 1. See INITR. If varname is used, GETPN sets the string varname to the page
number.
GETR refname
Combine GETHN and GETPN with the text “chapter” and “, page”. The string Qrf contains the text
for the cross reference:
.ds Qrf See chapter \\*[Qrfh], page \\*[Qrfp].
Qrf may be changed to support other languages. Strings Qrfh and Qrfp are set by GETR and contain
the page and heading number, respectively.
GETST refname [varname]
Include the string saved with the second argument to .SETR. This is a dummy string in pass 1. If
varname is used, GETST sets it to the saved string. See INITR.
H level [title [suffix]]
Set a numbered section heading at level. mm produces numbered heading marks of the form a.b.c...,
with up to fourteen levels of nesting. Each level's number increases automatically with each H
call and is reset to zero when a more significant level is specified. “1” is the most significant
or coarsest division of the document. Text after an H call is formatted as a paragraph; calling P
is unnecessary.
title specifies an optional title; it must be double-quoted if it contains spaces. mm appends
suffix to title in the body of the document, but omits it from any table of contents (see TC).
This facility can be used to annotate the heading title with a footnote. suffix should not
interpolate the F string; specify a footnote mark explicitly. See FS.
Heading behavior is highly configurable. Several registers set a threshold, where heading levels
at or below the threshold value are handled in one way, and those above it another. For example,
a heading level within the threshold of register Cl is included in the table of contents (see TC).
Heading layout. Register Ej sets a threshold for page breaking (ejection) prior to a heading. If
not preceded by a page break, a heading level below the threshold in register Hps is preceded by
the amount of vertical space in register Hps1, and by the amount in Hps2 otherwise. The Hb
register sets a threshold below which a break occurs after the heading, and register Hs sets a
threshold below which vertical space follows it. If the heading level is not less than both of
these, a run-in heading is produced; paragraph text follows on the same output line. Otherwise,
register Hi configures the indentation of text after headings. Threshold register Hc enables the
centering of headings; a heading level below both of the Hb and Hc thresholds is centered.
Heading typeface and size. The fonts used for heading numbers and titles at each level are
configured by the HF string. The string HP likewise assigns a type size to each heading level.
The vertical spacing used by headings may be controlled by the user-definable macros HX and/or HZ.
Heading number format. Registers named H1 through H14 store counters for each heading level.
Their values are printed using Arabic numerals by default; see HM. The heading levels are
catenated with dots for formatting; to typeset only the deepest, set the Ht register. Heading
numbers are not suffixed with a trailing dot except when only the first level is output; to omit a
dot in this case as well, clear the H1dot register.
Customizing heading behavior. mm calls hook macros to enable further customization of headings.
(DWB mm called these “exits”.) They can be used to change the heading's mark (the numbered
portion before any heading title), its vertical spacing, and its vertical space requirements (for
instance, to require a minimum quantity of subsequent output lines). Define hook macros in
expectation of the following parameters. The argument declared-level is the level argument to H,
or 0 for unnumbered headings (see HU). actual-level is the same as declared-level for numbered
headings, and the value of register Hu for unnumbered headings. title is the corresponding
argument to H or HU.
HX declared-level actual-level title
mm calls HX before setting the heading. Your definition may alter }0, }2, and ;3.
}0 (string)
contains the heading mark plus two spaces if declared-level is non-zero, and
otherwise is empty.
;0 (register)
encodes a position for the text after the heading. 0 means that the heading is to
be run in, 1 means that a break is to occur before the text, and 2 means that
vertical space is to separate heading and text.
}2 (string)
is the suffix that separates a run-in heading from the text. It contains two spaces
if register ;0 is 0, and otherwise is empty.
;3 (register)
contains the vertical space required for the heading to be typeset. If that amount
is not available, the page is broken prior to the heading. The default is 2v.
HY declared-level actual-level title
mm calls HY after determing the heading typeface and size. It could be used to change
indentation.
HZ declared-level actual-level title
mm calls HZ after formatting the heading, just before H or HU returns. It could be used to
change the page header to include a section heading.
HC [hyphenation-character]
Set hyphenation character. Default value is “\%”. Resets to the default if called without
argument. Hyphenation can be turned off by setting register Hy to 0 at the beginning of the file.
HM [arg1 [arg2 [... [arg14]]]]
Set the heading mark style. Each argument assigns the specified register format (see above) to
the corresponding heading level. The default is 1 for all levels. An explicitly empty argument
also indicates the default.
HU heading-text
Set an unnumbered section heading. Except for a heading number, it is treated as a numbered
heading of the level stored in register Hu; see H.
I [italic-text [previous-font-text]] ...
Join italic-text in italics with previous-font-text in the previous font, without space between
the arguments. If no arguments, switch font to italic style.
IA [recipient-name [title]]
Specify the inside address in a letter. Input is collected into the inside address until IE is
called, and then output. You can specify multiple recipients with empty IA/IE pairs; only the
last address is used. The arguments give each recipient a name and title. See LT.
IB [italic-text [bold-text]] ...
Join italic-text in italics with bold-text in boldface, without space between the arguments.
IE End the inside address begun with IA.
IND argument ...
If the Boolean register Ref is true, write an index entry as a specially prepared roff comment to
the standard error stream, with each argument separated from its predecessor by a tab character.
The entry's location information is arranged as configured by the most recent INITI call.
INDP Output the index set up by INITI and populated by IND calls. By default, INDP calls SK and writes
a centered caption interpolating the string Index. It then disables filling and calls 2C;
afterward, it restores filling and calls 1C.
Define macros to customize this behavior. INDP calls TXIND before the caption, TYIND instead of
writing the caption, and TZIND after formatting the index.
INITI location-type file-name [macro]
Initialize groff mm's indexing system. Argument location-type selects how the location of each
index entry is reported. file-name populates an internal string used later by INDP.
location-type Entry format
N page number
H heading mark
B page number, tab character, heading mark
If macro is specified, it is called for each index entry with the arguments given to IND.
INITR id
Initialize the cross reference macros. Cross references are written to the standard error stream,
which should be redirected into a file named id.qrf. mmroff(1) handles this and the two
formatting passes it requires. The first pass identifies cross references, and the second one
includes them.
See SETR, GETPN, and GETHN.
IR [italic-text [roman-text]] ...
Join italic-text in italics with roman-text in roman style, without space between the arguments.
ISODATE [0]
Use ISO 8601 format for the date string DT used by some cover sheet and memorandum types; that is,
YYYY-MM-DD. Must be called before ND to be effective. If given an argument of 0, the traditional
date format for the groff locale is used; this is also the default.
LB text-indent mark-indent pad type [mark [pre-item-space [pre-list-space]]]
Begin list. The macros AL, BL, BVL, DL, ML, RL, and VL call LB in various ways; they are simpler
to use and may be preferred if they suit the desired purpose.
The nesting level of lists is tracked by mm; the outermost level is 0. The text of each list item
is indented by text-indent; the default is taken from the Li register (in ens). Each item's mark
is indented by mark-indent; the default is 0n. The mark is normally left-aligned. If pad is
greater than zero, mark-indent is overridden such that pad ens of space follow the mark. type
selects one of six possible ways to display the mark.
type Output for a mark “x”
1 x.
2 x)
3 (x)
4 [x]
5 <x>
6 {x}
If type is 0 and mark is unspecified, the items are set with a hanging indent. Otherwise, mark is
interpreted as a string defining the mark. If type is greater than zero, items are automatically
numbered; mark is interpreted as a register format. The default type is 0.
The last two arguments manage vertical space. Unless a list's nesting level is greater than the
value of register Ls, its items are preceded by pre-item-space multiplied by the register Lsp; the
default is 1. LB precedes the list by pre-list-space multiplied by the register Lsp; the default
is 0.
LC [list-level]
Clear list state. Active lists are terminated as if with LE, either all (the default) or only
those from the current level down to list-level if specified. H calls LC automatically.
LE [1] End list. The current list is terminated. An argument of 1 causes vertical space in the amount
of register Lsp to follow the list.
LI [mark [item-mark-mode]]
Begin a list item. Input is collected into a list item until the current list is terminated or LI
is called again. By default, the item's text is preceded by any mark configured by the current
list. If only mark is specified, it replaces the configured mark. A second argument prefixes
mark to the configured mark; an item-mark-mode value of 1 places an unbreakable space after mark,
while a value of 2 does not (rendering the two adjacent). Also see register Limsp.
LO option [value]
Specify letter options; see LT. Standard options are as follows. See IA regarding the inside
address and string DT regarding the date.
option Effect
AT Attention; put contents of string LetAT and value left-aligned after the inside address.
CN Confidential; put value, or contents of string LetCN, left-aligned after the date.
RN Reference; put contents of string LetRN and value after the confidental notation (if any)
and the date, aligned with the latter.
SA Salutation; put value, or contents of string LetSA, left-aligned after the inside address
and the confidental notation (if any).
SJ Subject; put contents of string LetSJ and value left-aligned after the inside address and
the attention and salutation notations (if any). In letter type “SP”, LetSJ is ignored
and value is set in full capitals.
LT [style]
Format a letter in the designated style, defaulting to BL (see below). A letter begins with the
writer's address (WA/WE), followed by the date (ND), the inside address (IA/IE), the body of the
letter (P and other general-purpose mm macros), the formal closing (FC), the signature (SG), and
notations (NS/NE). Any of these may be omitted. Letter options specified with LO add further
annotations, which are extensible; see section “Internals” below.
style Description
BL Blocked: the writer's address, date, formal closing, and signature are indented to the
center of the line. Everything else is left-aligned.
SB Semi-blocked: as BL, but the first line of each paragraph is indented by 5m.
FB Fully blocked: everything begins at the left margin.
SP Simplified: as FB, but a formal closing is omitted, and the signature is set in full
capitals.
MC column-width [gutter-width]
Begin multi-column layout. groff mm creates as many columns of column-width as the line length
will permit. gutter-width is the interior spacing between columns. It defaults to column-
width/15. 1C returns to single-column layout. MC is a GNU extension. See MULB for an
alternative.
ML mark [text-indent [1]]
Start a list with the mark argument preceding each list item. text-indent overrides the default
indentation of the list items set by register Li. If a third argument, conventionally 1, is
given, the blank line that normally precedes each list item is suppressed. Use LI to declare list
items, and LE to end the list.
MT [type [addressee]]
Select memorandum type. These correspond to formats used by AT&T Bell Laboratories, where the mm
package was initially developed, affecting the document layout. Some of these included a cover
page with a caption categorizing the document. groff mm uses type to construct the file name
/usr/share/groff/1.23.0/tmac/mm/type.MT and load it with the mso request. Memorandum types 0 to 5
are supported; any other value of type is mapped to type 6. If type is omitted, 0 is implied.
addressee sets a string analogous to one used by AT&T cover sheet macros that are not implemented
in groff mm.
type Description
0 normal memorandum; no caption
1 captioned “MEMORANDUM FOR FILE”
2 captioned “PROGRAMMER'S NOTES”
3 captioned “ENGINEER'S NOTES”
4 released paper
5 external letter
See COVER for a more flexible cover sheet mechanism.
MOVE y-pos [x-pos [line-length]]
Move to a position, setting page offset to x-pos. If line-length is not given, the difference
between current and new page offset is used. Use PGFORM without arguments to return to normal.
MULB cw1 space1 [cw2 space2] ... cwn
Begin alternative multi-column mode. All column widths must be specified, as must the amount of
space between each column pair. The arguments' default scaling unit is n. MULB uses a diversion
and operates in a separate environment.
MULN Begin next column in alternative column mode.
MULE End alternative multi-column mode and emit the columns.
NCOL Move to the start of the next column (only when using 2C or MC). Contrast with MULN.
ND [arg]
Set the document's date. mm does not interpret arg; it can be a revision identifier (or empty).
NE End notation begun with NS; filling is enabled.
nP [type]
Begin a numbered paragraph at heading level two. See P.
NS [code [1]]
Declare notations, typically for letters or memoranda, of the type specified by code. The text
corresponding to code is output, and filling is disabled until NE is called. Typically, a list of
names or attachments lies within NS/NE. If code is absent or does not match one of the values
listed under the Letns string description below, each line of notations is formatted as “Copy
(line) to”. If a second argument, conventionally 1, is given, code becomes the entire notation
and NE is not necessary. In groff mm, you can set up further notations to be recognized by NS;
see the strings Letns and Letnsdef below.
OF ["'left'center'right'"]
Define the odd-page footer, which is formatted just above the normal page footer on odd-numbered
pages. See PF. OF defines the string EOPof.
OH ["'left'center'right'"]
Define the odd-page header, which is formatted just below the normal page header on odd-numbered
pages. See PH. OH defines the string TPoh.
OP Make sure that the following text is printed at the top of an odd-numbered page. Does not output
an empty page if currently at the top of an odd page.
P [type]
Begin new paragraph. If type is missing or 0, P sets the paragraph fully left-aligned. A type
of 1 idents the first line by \[Pi] ens. Set the register Pt to select a default paragraph
indentation style. The register Ps controls the vertical spacing between paragraphs.
PE Picture end; see pic(1).
PF ["'left'center'right'"]
Define the page footer. The footer is formatted at the bottom of each page; the argument is
otherwise as described in PH. PF defines the string EOPf. See EF, OF, and EOP.
PGFORM [linelength [pagelength [pageoffset [1]]]]
Set line length, page length, and/or page offset. This macro can be used for letterheads and
similar. It is normally the first macro call in a file, though it is not necessary. PGFORM can
be used without arguments to reset everything after a MOVE call. A line break is done unless the
fourth argument is given. This can be used to avoid the page number on the first page while
setting new width and length. (It seems as if this macro sometimes doesn't work too well. Use
the command-line arguments to change line length, page length, and page offset instead.)
PGNH Suppress header on the next page. This macro must be called before any macros that produce output
to affect the layout of the first page.
PH ["'left'center'right'"]
Define the page header, formatted at the top of each page, as the argument, where left, center,
and right are aligned to the respective locations on the line. A “%” character in arg is replaced
by the page number. If the argument is absent, no page header is set. The default page header is
"''- % -''"
which centers the page number between hyphens and formats nothing at the upper left and right.
Header macros call PX (if defined) after formatting the header. PH defines the string TPh. See
EH, OH, and TP.
PIC [-B] [-C|-I n|-L|-R] file [width [height]]
Include PostScript document file. The optional -B argument draws a box around the picture. The
optional -L, -C, -R, and -I n arguments align the picture or indent it by n (assuming a scaling
unit of m). By default, the picture is left-aligned. Optional width and height arguments resize
the picture. Use of this macro requires two-pass processing; see INITR and mmroff(1).
PS Picture start; see pic(1).
PY Picture end with flyback. Ends a pic(1) picture, returning the vertical position to where it was
prior to the picture. This is a GNU extension.
R [roman-text [previous-font-text]] ...
Join roman-text in roman style with previous-font-text in the previous font, without space between
the arguments. If no arguments, switch font to roman style.
RB [roman-text [bold-text]] ...
Join roman-text in roman style with bold-text in boldface, without space between the arguments.
RD [prompt [diversion [string]]]
Read from standard input to diversion and/or string. The text is saved in a diversion named
diversion. Recall the text by writing the name of the diversion after a dot on an empty line. A
string is also defined if string is given. Diversion and/or prompt can be empty ("").
RF Reference end. Ends a reference definition and returns to normal processing. See RS.
RI [roman-text [italic-text]] ...
Join roman-text in roman style with italic-text in italics, without space between the arguments.
RL [text-indent [1]]
Begin reference list. Each item is preceded by an automatically incremented number between square
brackets; compare AL. text-indent changes the default indentation. Use LI to declare list items,
and LE to end the list. A second argument, conventionally 1, suppresses the blank line that
normally precedes each list item.
RP [suppress-counter-reset [page-ejection-policy]]
Format a reference page, listing items accumulated within RS/RF pairs. The reference counter is
reset unless the first argument is 1. Normally, page breaks occur before and after the references
are output; the register Rpe configures this behavior, and a second argument overrides its value.
TC calls RP automatically if references have accumulated.
References are list items, and thus are vertically separated (see LB). Setting register Ls to 0
suppresses this spacing. The string Rp contains the reference page caption.
RS [reference-string]
Begin an automatically numbered reference definition. By default, references are numbered
starting at 1; the number is available in register :R. Interpolate the string Rf where the
reference mark should be and write the reference between RS/RF on an input line after the
reference mark. If reference-string is specified, groff ms also stores the reference mark in a
string of that name, which can be interpolated as \*[reference-string] subsequently.
S [type-size [vertical-spacing]]
Set type size and vertical spacing. Each argument is a groff measurement, using an appropriate
scaling unit and an optional + or - prefix to increment or decrement the current value. An
argument of P restores the previous value, C indicates the current value, and D requests the
default. An empty or omitted argument is treated as P.
SA [mode]
Set or restore the default enablement of adjustment. Specify 0 or 1 as mode to set a document's
default explicitly; 1 is assumed by mm. Adjustment can be temporarily suspended with the na
request. When the H or HU macros are used to format a heading, or when SA is called without a
mode argument, the default adjustment is restored.
SETR refname [string]
Remember the current heading and page numbers as refname. Saves string if string is defined.
string is retrieved with GETST. See INITR.
SG [arg [1]]
Signature line. Prints the authors name(s) after the formal closing. The argument is appended to
the reference data, printed at either the first or last author. The reference data is the
location, department, and initials specified with AU. It is printed at the first author if the
second argument is given, otherwise at the last. No reference data is printed if the author(s) is
specified through WA/WE. See section “Internals” below.
SK [n] Skip n pages. If n is 0 or omitted, the page is broken unless the drawing position is already at
the top of a page. Otherwise, n pages, blank except for any headers and footers, are printed.
SM text [post]
SM pre text post
Format text at a smaller type size, joined with any specified pre and post at normal size.
SP [lines]
Space vertically. lines can have any scaling factor, like “3i” or “8v”. Several SP calls in a
line only produces the maximum number of lines, not the sum. SP is ignored also until the first
text line in a page. Add \& before a call to SP to avoid this.
TAB Reset tab stops to every 5 ens.
TB [title [override [flag [refname]]]]
Caption a table. Arguments are handled analogously to EC. The register Tb is the table counter.
The string Litb precedes the table number and any title. Table captions are centered irrespective
of the alignment of any enclosing display.
Captioned tables are listed in a table of contents (see TC) if the Boolean register Lt is true.
Such a list uses the string Lt as a heading.
TC [slevel [spacing [tlevel [tab [h1 [h2 [h3 [h4 [h5]]]]]]]]]
Output table of contents. This macro is normally the last called in the document. It flushes any
pending displays and, if any references are pending (see RS), calls RP. It then begins a new page
with the contents caption, stored in the string Licon, centered at the top. The entries follow
after three vees of space. Each entry is a saved section (number and) heading title (see the Cl
register), along with its associated page number. By default, an entry is indented by an amount
corresponding to its heading level and the maximum heading length encountered at that heading
level; if defined, the string Ci overrides these indentations. Entries at heading levels up to
and including slevel are preceded by spacing vees of space. Entries at heading levels up to and
including tlevel are followed by a leader and a right-aligned page number. If the Boolean-valued
tab argument is true, the leader is replaced with horizontal motion in the same amount. For
entries above heading level tlevel, the page number follows the heading text after a word space.
Each argument h1...h5 appears in order on its own line, centered, above the contents caption.
Page numbering restarts at 1, in register format “i”. If the Oc register is true, numbering of
these pages is suppressed.
If TC is called with at most four arguments, it calls the user-defined macro TX (if defined) prior
to formatting the contents caption, and TY (if defined) instead of formatting the contents
caption.
Analogous handling of lists of figures, tables, equations, and exhibits is achieved by defining
TXxx and TYxx macros, where xx is “FG”, “TB”, “EC”, or “EX”, respectively. Similarly, the strings
Lifg, Litb, Liex, and Liec determine captions for their respective lists.
TE Table end. See TS.
TH End table heading. It is repeated after page breaks within a table. See TS. The N argument
supported by DWB mm is not implemented by groff mm.
TL [charging-case-number [filing-case-number]]
Begin document title. Input is collected into the title until AF or AU is called, and output as
directed by the cover page. charging-case-number and filing-case-number are saved for use in
memorandum types 0 and 5. See MT.
TM number ...
Declare technical memorandum number(s) used by MT.
TP If defined, this macro is called in lieu of normal page header layout. Headers and footers are
formatted in a separate environment. See EOP.
Strings available to TP
────────────────────────
TPh argument to PH
TPeh argument to EH
TPoh argument to OH
TS [H] Table start. Argument “H” tells mm that the table has a heading. See TE, TH, and tbl(1).
VERBON [format [type-size [font]]]
Begin verbatim display, where characters have equal width. format controls several parameters.
Add up the values of desired features; the default is 0. On typesetting devices, further
arguments configure the type-size in scaled points, and the face (font); the default is CR
(Courier roman).
Value Effect
1 Disable the formatter's escape character (\).
2 Vertically space before the display.
4 Vertically space after the display.
8 Number output lines; call formatter's nm request with arguments in string Verbnm.
16 Indent by the amount stored in register Verbin.
VERBOFF
End verbatim display.
VL [text-indent [mark-indent [1]]]
Begin variable-item (or “tagged”) list. Each item should supply its own mark, or tag. If the
mark is wider than mark-indent, one space separates it from subsequent text; contrast BVL. text-
indent sets the indentation of the text, and mark-indent the distance from the current list
indentation to the mark. A third argument suppresses the blank line that normally precedes each
list item. Use LI to declare list items, and LE to end the list.
VM [-T] [top [bottom]]
Vertical margin. Increase the top and bottom margin by top and bottom, respectively. If option
-T is specified, set those margins to top and bottom. If no argument is given, reset the margin
to zero, or to the default (“7v 5v”) if -T is used. It is highly recommended that macros TP
and/or EOP are defined if using -T and setting top and/or bottom margin to less than the default.
This undocumented DWB mm macro is exposed by groff mm to increase user control of page layout.
WA [writer's-name [title]]
Specify the writer(s) of an LT letter. Input is collected into the writer's address until WA is
called, and then output. You can specify multiple writers with empty WA/WE pairs; only the last
address is used. The arguments give each writer a name and title.
WC [format ...]
Control width of footnotes and displays.
format Effect
N equivalent to “-WF -FF -WD” (default)
WF set footnotes at full line length, even in two-column mode
-WF set footnotes using column line length
FF apply width of first footnote to encountered to subsequent ones
-FF footnote width determined by WF and -WF
WD set displays at full line length, even in two-column mode
-WD set displays using column line length
WE End the writer's address begun with WA.
Strings
Many mm strings interpolate predefined, localizable text. These are presented in quotation marks.
App “APPENDIX”
Apptxt stores the title argument to the last APP call.
BU interpolates a bullet (see BL).
Ci is a list of indentation amounts to use for table of contents heading levels, overriding their
automatic computation. Each word must be a horizontal measurement (like “1i”) and is mapped one-
to-one to heading levels 1, 2, and so on.
DT The date; set by the ND macro (defaults to the date the document is formatted). The format is the
conventional one for the groff locale, but see the ISODATE macro and Iso register.
EM interpolates an em dash.
F interpolates an automatically numbered footnote marker; the number is used by the next FS call
without an argument. In troff mode, the marker is superscripted; in nroff mode, it is surrounded
by square brackets.
H1txt Updated by .H and .HU to the current heading text. Also updated in table of contents & friends.
HF assigns font identifiers, separated by spaces, to heading levels in one-to-one correspondence.
Each identifier may be a font mounting position, font name, or style name. Omitted values are
assumed to be 1. The default is “2 2 2 2 2 2 2 2 2 2 2 2 2 2”, which places all headings in
italics. DWB mm's default was “3 3 2 2 2 2 2”.
HP assigns type sizes, separated by spaces, to heading levels in one-to-one correspondence. Each
size is interpreted in scaled points; zero values are translated to 10. Omitted values are
assumed to be 0 (and are translated accordingly). The default is “0 0 0 0 0 0 0 0 0 0 0 0 0 0”.
Index “INDEX”
Le “LIST OF EQUATIONS”
Letfc “Yours very truly,” (see FC)
Letapp “APPROVED:” (see AV)
LetAT “ATTENTION:” (see LO)
LetCN “CONFIDENTIAL” (see LO)
Letdate
“Date” (see AV)
Letns is a group of strings structuring the notations produced by NS. If the code argument to NS has no
corresponding string, the notation is included between parentheses, prefixed with Letns!copy, and
suffixed with Letns!to. Observe the spaces after “Copy” and before “to”.
NS code String Contents
0 Letns!0 Copy to
1 Letns!1 Copy (with att.) to
2 Letns!2 Copy (without att.) to
3 Letns!3 Att.
4 Letns!4 Atts.
5 Letns!5 Enc.
6 Letns!6 Encs.
7 Letns!7 Under separate cover
8 Letns!8 Letter to
9 Letns!9 Memorandum to
10 Letns!10 Copy (with atts.) to
11 Letns!11 Copy (without atts.) to
12 Letns!12 Abstract Only to
13 Letns!13 Complete Memorandum to
14 Letns!14 CC
— Letns!copy Copy (with trailing space)
— Letns!to to (note leading space)
Letnsdef
Select the notation format used by NS when it is given no argument. The default is “0”.
LetRN “In reference to:” (see LO)
LetSA “To Whom It May Concern:” (see LO)
LetSJ “SUBJECT:” (see LO)
Lf “LIST OF FIGURES”
Licon “CONTENTS”
Liec “Equation”
Liex “Exhibit”
Lifg “Figure”
Litb “TABLE”
Lt “LIST OF TABLES”
Lx “LIST OF EXHIBITS”
MO1...MO12
“January” through “December”
Qrf “See chapter \\*[Qrfh], page \\n[Qrfp].”
Rf interpolates an automatically numbered reference mark; the number is used by the next RS call. In
troff mode, the marker is superscripted; in nroff mode, it is surrounded by square brackets.
Rp “REFERENCES”
Sm interpolates ℠, the service mark sign.
Tcst interpolates an indicator of the TC macro's processing status. If TC is not operating, it is
empty. User-defined TP or EOP macros might condition page headers or footers on its contents.
Value Meaning
co Table of contents
fg List of figures
tb List of tables
ec List of equations
ex List of exhibits
ap Appendix
Tm interpolates ™, the trade mark sign.
Verbnm supplies argument(s) to the nm request employed by the VERBON macro. The default is “1”.
Registers
Default register values, where meaningful, are shown in parentheses. Many are also marked as Boolean-
valued, meaning that they are considered “true” (on, enabled) when they have a positive value, and
“false” (off, disabled) otherwise.
.mgm indicates that groff mm is in use (Boolean-valued; 1).
:p is an auto-incrementing footnote counter; see FS.
:R is an auto-incrementing reference counter; see RS.
Aph formats an appendix heading (and title, if supplied); see APP (Boolean-valued; 1).
Au includes supplemental author information (the third and subsequent arguments to AU) in memorandum
“from” information; see COVER and MT (Boolean-valued; 1).
Cl sets the threshold for inclusion of headings in a table of contents. Headings at levels above
this value are excluded; see H and TC (2). The Cl register controls whether a heading is saved
for output in the table of contents at the time H or HU is called; if you change Cl's value
immediately prior to calling TC, you are unlikely to get the result you want.
Cp suppresses page breaks before lists of captioned equations, exhibits, figures, and tables, and
before an index; see EC, EX, FG, TB, and INDP (Boolean-valued; 0).
D produces debugging information for the mm package on the standard error stream. A value of 0
outputs nothing; 1 reports formatting progress. Higher values communicate internal state
information of increasing verbosity (0).
De causes a page break after a floating display is output; see DF (Boolean-valued; 0).
Df configures the behavior of DF. The following values are recognized; 4 and 5 do not override the
De register (5).
Value Effect
0 Flush pending displays at the end of each section when section-page numbering is active,
otherwise at the end of the document.
1 Flush a pending display on the current page or column if there is enough space, otherwise
at the end of the document.
2 Flush one pending display at the top of each page or column.
3 Flush a pending display on the current page or column if there is enough space, otherwise
at the top of the next.
4 Flush as many pending displays as possible in a new page or column.
5 Fill columns or pages with flushed displays until none remain.
Ds puts vertical space in the amount of register Dsp (if defined) or Lsp before and after each static
display; see DS (Boolean-valued; 1).
Dsp configures the amount of vertical space placed before and after static displays; see DS and
register Ds (undefined).
Ec is an auto-incrementing equation counter; see EC.
Ej sets the threshold for page breaks (ejection) prior to the format of headings. Headings at levels
above this value are set on the same page and column if possible; see H (0).
Eq aligns an equation label to the left of a display instead of the right (Boolean-valued; 0).
Ex is an auto-incrementing exhibit counter; see EX.
Fg is an auto-incrementing figure counter; see FG.
Fs is multiplied by register Lsp to vertically separate footnotes; see FS (1).
H1...H14
are auto-incrementing counters corresponding to each heading level; see H.
H1dot appends a period to the number of a level one heading; see H (Boolean-valued; 1).
H1h is a copy of A copy of register register H1, but it is incremented just before a page break. This
can be useful in user-defined macros; see H and HX.
Hb sets the threshold for breaking the line after formatting a heading. Text after headings at
levels above this value are set on the same output line if possible; see H (2).
Hc sets the threshold for centering a heading. Headings at levels above this value use the
prevailing alignment (that is, they are not centered); see H (0).
Hi configures the indentation of text after headings. It does not affect “run-in” headings. The
following values are recognized; see H and P (1).
Value Effect
0 no indentation
1 indent per the paragraph type
2 indent to align with heading title
Hps sets the heading level threshold for application of preceding vertical space; see H. Headings at
levels above the value in register Hps use the amount of space in register Hps1; otherwise that in
Hps2. The value of Hps should be strictly greater than that of Ej (1).
Hps1 configures the amount of vertical space preceding a heading above the Hps threshold; see H (troff
devices: 0.5v; nroff devices: 1v).
Hps2 configures the amount of vertical space preceding a heading at or below the Hps threshold; see H
(troff devices: 1v; nroff devices: 2v).
Hs sets the heading level threshold for application of succeeding vertical space. If the heading
level is greater than Hs, the heading is followed by vertical space in the amount of register Hss;
see H (2).
Hss is multiplied by register Lsp to produce vertical space after headings above the threshold in
register Hs; see H (1).
Ht suppresses output of heading level counters above the lowest when the heading is formatted; see H
(Boolean-valued; 0).
Hu sets the heading level used by unnumbered headings; see HU (2).
Hy enables automatic hyphenation of words (Boolean-valued; 0).
Iso configures the use of ISO 8601 date format if specified (with any value) on the command line; see
ISODATE. The default is determined by localization files.
L defines the page length for the document, and must be set from the command line. A scaling unit
should be appended. The default is that of the selected groff output device.
Le
Lf
Lt
Lx configure the report of lists of equation, figure, table, and exhibit captions, respectively,
after a table of contents; see TC (Boolean-valued; Le: 0; Lf, Lt, Lx: 1).
Letwam sets the maximum number of input lines permitted in a writer's address; see WA and WE (14).
Li configures the amount of indentation in ens applied to list items; see LI (6).
Limsp inserts a space between the prefix and the mark in automatically numbered lists; see AL (Boolean-
valued; 1).
Ls sets a threshold for placement of vertical space before list items. If the list nesting level is
greater than this value, no such spacing occurs; see LI (99).
Lsp configures the base amount of vertical space used for separation in the document. mm applies this
spacing to many contexts, sometimes with multipliers; see DS, FS, H, LI, and P (troff devices:
0.5v; nroff devices: 1v).
N configures the header and footer placements used by PH. The default footer is empty. If
“section-page” numbering is selected, the default header becomes empty and the default footer
becomes “x-y”, where x is is the section number (the number of the current first-level heading)
and y the page number within the section. The following values are recognized; for finer control,
see PH, PF, EH, EF, OH, and OF, and registers Sectf and Sectp. Value 5 is a GNU extension (0).
Value Effect
0 Set header on all pages.
1 Move header to footer on page 1.
2 Omit header on page 1.
3 Use “section-page” numbering style on all pages.
4 Omit header on all pages.
5 Use “section-page” and “section-figure” numbering style on all pages.
Np causes paragraphs after first-level headings (only) to be numbered in the format s.p, where s is
is the section number (the number of the current first-level heading) and p is the paragraph
number, starting at 1; see H and P (Boolean-valued; 0).
O defines the page offset of the document, and must be set from the command line. A scaling unit
should be appended. The default is .75i on terminal devices. On typesetters, it is .963i or set
to 1i by the papersize.tmac package; see groff_tmac(5).
Oc suppresses the appearance of page numbers in the table of contents; see TC (Boolean-valued; 0).
Of selects a separator format within equation, exhibit, figure, and table captions; see EC, EX, FG,
and TB. The following values are recognized; the spaces shown are unpaddable (0).
Value Effect
0 ". "
1 " — "
P interpolates the current page number; it is the same as register % except when “section-page”
numbering is enabled.
Pi configures the amount of indentation in ens applied to the first line of a paragraph; see P (5).
Pgps causes the type size and vertical spacing set by S to apply to headers and footers, overriding the
HP string. If not set, S calls affect headers and footers only when followed by PH, PF, OH, EH,
OF, or OE calls (Boolean-valued; 1).
Ps is multiplied by register Lsp to vertically separate paragraphs; see P (1).
Pt determines when a first-line indentation is applied to a paragraph; see P (0).
Value Effect
0 never
1 always
2 always, except immediately after H, DE, or LE
Ref is used internally to control mmroff(1)'s two-pass approach to index and reference management; see
INITI and RS (Boolean-valued; 0).
Rpe configures the default page ejection policy for reference pages; see RP (0).
Value Effect
0 Break the page before and after the list of references.
1 Suppress page break after the list.
2 Suppress page break before the list.
3 Suppress page breaks before and after the list.
S defines the type size for the document, and must be set from the command line. A scaling unit
should be appended; p is typical (10p).
Sectf selects the “section-figure” numbering style. Its default is 0 unless register N is set to 5 at
the command line (Boolean-valued).
Sectp selects the “section-page” numbering style. Its default is 0 unless register N is set to 3 or 5
at the command line (Boolean-valued).
Si configures the amount of display indentation in ens; see DS (5).
Tb is an auto-incrementing table counter; see TB.
V defines the vertical spacing for the document, and must be set from the command line. A scaling
unit should be appended; p is typical. The default vertical spacing is 120% of the type size.
Verbin configures the amount of indentation for verbatim displays when indentation is selected; see
VERBON (5n).
W defines the “width” of the document (that is, the length of an output line with no indentation);
it must be set from the command line. A scaling unit should be appended. The default is 6i or
assigned by the papersize.tmac package; see groff_tmac(5).
Internals
The LT letter macros call further macros depending on the letter type, with which they are suffixed. It
is therefore possible to define additional letter types, either in the territory-specific macro file, or
as local additions. LT sets the registers Pt and Pi to 0 and 5, respectively. The following macros must
be defined to support a new letter type.
let@init_type
LT calls this macro to initialize any registers and other data needed by the letter type.
let@head_type
formats the letterhead; it is called instead of the usual page header macro. Its definition
should remove the alias let@header unless the letterhead is desired on subsequent pages.
let@sg_type name title n is-final [SG-arg ...]
SG calls this macro only for letters; MT memoranda have their own signature processing. name and
title are specified through WA/WE. n is the index of the nth writer, and is-final is true for the
last writer to be listed. Further SG arguments are appended to the signature line.
let@fc_type closing
This macro is called by FC, and has the formal closing as the argument.
LO implements letter options. It requires that a string named Lettype be defined, where type is the
letter type. LO then assigns its second argument (value) to the string let*lo-type.
Files
/usr/share/groff/1.23.0/tmac/m.tmac
is the groff implementation of the memorandum macros.
/usr/share/groff/1.23.0/tmac/mm.tmac
is wrapper to load m.tmac.
/usr/share/groff/1.23.0/tmac/refer-mm.tmac
implements refer(1) support for mm.
/usr/share/groff/1.23.0/tmac/mm/ms.cov
implements an ms-like cover sheet.
/usr/share/groff/1.23.0/tmac/mm/0.MT
implements memorandum types 0–3 and 6.
/usr/share/groff/1.23.0/tmac/mm/4.MT
implements memorandum type 4.
/usr/share/groff/1.23.0/tmac/mm/5.MT
implements memorandum type 5.
/usr/share/groff/1.23.0/tmac/mm/locale
performs any (further) desired necessary localization; empty by default.
Authors
The GNU version of the mm macro package was written by Jörgen Hägg of Lund, Sweden.
See also
MM - A Macro Package for Generating Documents, the DWB 3.3 mm manual, introduces the package but does not
document GNU extensions.
Groff: The GNU Implementation of troff, by Trent A. Fisher and Werner Lemberg, is the primary groff
manual. You can browse it interactively with “info groff”.
groff(1), troff(1), tbl(1), pic(1), eqn(1), refer(1), groff_mmse(7) (only in Swedish locales)
groff 1.23.0 31 March 2024 groff_mm(7)