Provided by: manpages-dev_6.7-2_all 
NAME
mmap, munmap - map or unmap files or devices into memory
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#include <sys/mman.h>
void *mmap(void addr[.length], size_t length, int prot, int flags,
int fd, off_t offset);
int munmap(void addr[.length], size_t length);
See NOTES for information on feature test macro requirements.
DESCRIPTION
mmap() creates a new mapping in the virtual address space of the calling process. The starting address
for the new mapping is specified in addr. The length argument specifies the length of the mapping (which
must be greater than 0).
If addr is NULL, then the kernel chooses the (page-aligned) address at which to create the mapping; this
is the most portable method of creating a new mapping. If addr is not NULL, then the kernel takes it as
a hint about where to place the mapping; on Linux, the kernel will pick a nearby page boundary (but
always above or equal to the value specified by /proc/sys/vm/mmap_min_addr) and attempt to create the
mapping there. If another mapping already exists there, the kernel picks a new address that may or may
not depend on the hint. The address of the new mapping is returned as the result of the call.
The contents of a file mapping (as opposed to an anonymous mapping; see MAP_ANONYMOUS below), are
initialized using length bytes starting at offset offset in the file (or other object) referred to by the
file descriptor fd. offset must be a multiple of the page size as returned by sysconf(_SC_PAGE_SIZE).
After the mmap() call has returned, the file descriptor, fd, can be closed immediately without
invalidating the mapping.
The prot argument describes the desired memory protection of the mapping (and must not conflict with the
open mode of the file). It is either PROT_NONE or the bitwise OR of one or more of the following flags:
PROT_EXEC Pages may be executed.
PROT_READ Pages may be read.
PROT_WRITE Pages may be written.
PROT_NONE Pages may not be accessed.
The flags argument
The flags argument determines whether updates to the mapping are visible to other processes mapping the
same region, and whether updates are carried through to the underlying file. This behavior is determined
by including exactly one of the following values in flags:
MAP_SHARED
Share this mapping. Updates to the mapping are visible to other processes mapping the same
region, and (in the case of file-backed mappings) are carried through to the underlying file. (To
precisely control when updates are carried through to the underlying file requires the use of
msync(2).)
MAP_SHARED_VALIDATE (since Linux 4.15)
This flag provides the same behavior as MAP_SHARED except that MAP_SHARED mappings ignore unknown
flags in flags. By contrast, when creating a mapping using MAP_SHARED_VALIDATE, the kernel
verifies all passed flags are known and fails the mapping with the error EOPNOTSUPP for unknown
flags. This mapping type is also required to be able to use some mapping flags (e.g., MAP_SYNC).
MAP_PRIVATE
Create a private copy-on-write mapping. Updates to the mapping are not visible to other processes
mapping the same file, and are not carried through to the underlying file. It is unspecified
whether changes made to the file after the mmap() call are visible in the mapped region.
Both MAP_SHARED and MAP_PRIVATE are described in POSIX.1-2001 and POSIX.1-2008. MAP_SHARED_VALIDATE is a
Linux extension.
In addition, zero or more of the following values can be ORed in flags:
MAP_32BIT (since Linux 2.4.20, 2.6)
Put the mapping into the first 2 Gigabytes of the process address space. This flag is supported
only on x86-64, for 64-bit programs. It was added to allow thread stacks to be allocated
somewhere in the first 2 GB of memory, so as to improve context-switch performance on some early
64-bit processors. Modern x86-64 processors no longer have this performance problem, so use of
this flag is not required on those systems. The MAP_32BIT flag is ignored when MAP_FIXED is set.
MAP_ANON
Synonym for MAP_ANONYMOUS; provided for compatibility with other implementations.
MAP_ANONYMOUS
The mapping is not backed by any file; its contents are initialized to zero. The fd argument is
ignored; however, some implementations require fd to be -1 if MAP_ANONYMOUS (or MAP_ANON) is
specified, and portable applications should ensure this. The offset argument should be zero.
Support for MAP_ANONYMOUS in conjunction with MAP_SHARED was added in Linux 2.4.
MAP_DENYWRITE
This flag is ignored. (Long ago—Linux 2.0 and earlier—it signaled that attempts to write to the
underlying file should fail with ETXTBSY. But this was a source of denial-of-service attacks.)
MAP_EXECUTABLE
This flag is ignored.
MAP_FILE
Compatibility flag. Ignored.
MAP_FIXED
Don't interpret addr as a hint: place the mapping at exactly that address. addr must be suitably
aligned: for most architectures a multiple of the page size is sufficient; however, some
architectures may impose additional restrictions. If the memory region specified by addr and
length overlaps pages of any existing mapping(s), then the overlapped part of the existing
mapping(s) will be discarded. If the specified address cannot be used, mmap() will fail.
Software that aspires to be portable should use the MAP_FIXED flag with care, keeping in mind that
the exact layout of a process's memory mappings is allowed to change significantly between Linux
versions, C library versions, and operating system releases. Carefully read the discussion of
this flag in NOTES!
MAP_FIXED_NOREPLACE (since Linux 4.17)
This flag provides behavior that is similar to MAP_FIXED with respect to the addr enforcement, but
differs in that MAP_FIXED_NOREPLACE never clobbers a preexisting mapped range. If the requested
range would collide with an existing mapping, then this call fails with the error EEXIST. This
flag can therefore be used as a way to atomically (with respect to other threads) attempt to map
an address range: one thread will succeed; all others will report failure.
Note that older kernels which do not recognize the MAP_FIXED_NOREPLACE flag will typically (upon
detecting a collision with a preexisting mapping) fall back to a “non-MAP_FIXED” type of behavior:
they will return an address that is different from the requested address. Therefore, backward-
compatible software should check the returned address against the requested address.
MAP_GROWSDOWN
This flag is used for stacks. It indicates to the kernel virtual memory system that the mapping
should extend downward in memory. The return address is one page lower than the memory area that
is actually created in the process's virtual address space. Touching an address in the "guard"
page below the mapping will cause the mapping to grow by a page. This growth can be repeated
until the mapping grows to within a page of the high end of the next lower mapping, at which point
touching the "guard" page will result in a SIGSEGV signal.
MAP_HUGETLB (since Linux 2.6.32)
Allocate the mapping using "huge" pages. See the Linux kernel source file
Documentation/admin-guide/mm/hugetlbpage.rst for further information, as well as NOTES, below.
MAP_HUGE_2MB
MAP_HUGE_1GB (since Linux 3.8)
Used in conjunction with MAP_HUGETLB to select alternative hugetlb page sizes (respectively, 2 MB
and 1 GB) on systems that support multiple hugetlb page sizes.
More generally, the desired huge page size can be configured by encoding the base-2 logarithm of
the desired page size in the six bits at the offset MAP_HUGE_SHIFT. (A value of zero in this bit
field provides the default huge page size; the default huge page size can be discovered via the
Hugepagesize field exposed by /proc/meminfo.) Thus, the above two constants are defined as:
#define MAP_HUGE_2MB (21 << MAP_HUGE_SHIFT)
#define MAP_HUGE_1GB (30 << MAP_HUGE_SHIFT)
The range of huge page sizes that are supported by the system can be discovered by listing the
subdirectories in /sys/kernel/mm/hugepages.
MAP_LOCKED (since Linux 2.5.37)
Mark the mapped region to be locked in the same way as mlock(2). This implementation will try to
populate (prefault) the whole range but the mmap() call doesn't fail with ENOMEM if this fails.
Therefore major faults might happen later on. So the semantic is not as strong as mlock(2). One
should use mmap() plus mlock(2) when major faults are not acceptable after the initialization of
the mapping. The MAP_LOCKED flag is ignored in older kernels.
MAP_NONBLOCK (since Linux 2.5.46)
This flag is meaningful only in conjunction with MAP_POPULATE. Don't perform read-ahead: create
page tables entries only for pages that are already present in RAM. Since Linux 2.6.23, this flag
causes MAP_POPULATE to do nothing. One day, the combination of MAP_POPULATE and MAP_NONBLOCK may
be reimplemented.
MAP_NORESERVE
Do not reserve swap space for this mapping. When swap space is reserved, one has the guarantee
that it is possible to modify the mapping. When swap space is not reserved one might get SIGSEGV
upon a write if no physical memory is available. See also the discussion of the file
/proc/sys/vm/overcommit_memory in proc(5). Before Linux 2.6, this flag had effect only for
private writable mappings.
MAP_POPULATE (since Linux 2.5.46)
Populate (prefault) page tables for a mapping. For a file mapping, this causes read-ahead on the
file. This will help to reduce blocking on page faults later. The mmap() call doesn't fail if
the mapping cannot be populated (for example, due to limitations on the number of mapped huge
pages when using MAP_HUGETLB). Support for MAP_POPULATE in conjunction with private mappings was
added in Linux 2.6.23.
MAP_STACK (since Linux 2.6.27)
Allocate the mapping at an address suitable for a process or thread stack.
This flag is currently a no-op on Linux. However, by employing this flag, applications can ensure
that they transparently obtain support if the flag is implemented in the future. Thus, it is used
in the glibc threading implementation to allow for the fact that some architectures may (later)
require special treatment for stack allocations. A further reason to employ this flag is
portability: MAP_STACK exists (and has an effect) on some other systems (e.g., some of the BSDs).
MAP_SYNC (since Linux 4.15)
This flag is available only with the MAP_SHARED_VALIDATE mapping type; mappings of type MAP_SHARED
will silently ignore this flag. This flag is supported only for files supporting DAX (direct
mapping of persistent memory). For other files, creating a mapping with this flag results in an
EOPNOTSUPP error.
Shared file mappings with this flag provide the guarantee that while some memory is mapped
writable in the address space of the process, it will be visible in the same file at the same
offset even after the system crashes or is rebooted. In conjunction with the use of appropriate
CPU instructions, this provides users of such mappings with a more efficient way of making data
modifications persistent.
MAP_UNINITIALIZED (since Linux 2.6.33)
Don't clear anonymous pages. This flag is intended to improve performance on embedded devices.
This flag is honored only if the kernel was configured with the CONFIG_MMAP_ALLOW_UNINITIALIZED
option. Because of the security implications, that option is normally enabled only on embedded
devices (i.e., devices where one has complete control of the contents of user memory).
Of the above flags, only MAP_FIXED is specified in POSIX.1-2001 and POSIX.1-2008. However, most systems
also support MAP_ANONYMOUS (or its synonym MAP_ANON).
munmap()
The munmap() system call deletes the mappings for the specified address range, and causes further
references to addresses within the range to generate invalid memory references. The region is also
automatically unmapped when the process is terminated. On the other hand, closing the file descriptor
does not unmap the region.
The address addr must be a multiple of the page size (but length need not be). All pages containing a
part of the indicated range are unmapped, and subsequent references to these pages will generate SIGSEGV.
It is not an error if the indicated range does not contain any mapped pages.
RETURN VALUE
On success, mmap() returns a pointer to the mapped area. On error, the value MAP_FAILED (that is,
(void *) -1) is returned, and errno is set to indicate the error.
On success, munmap() returns 0. On failure, it returns -1, and errno is set to indicate the error
(probably to EINVAL).
ERRORS
EACCES A file descriptor refers to a non-regular file. Or a file mapping was requested, but fd is not
open for reading. Or MAP_SHARED was requested and PROT_WRITE is set, but fd is not open in
read/write (O_RDWR) mode. Or PROT_WRITE is set, but the file is append-only.
EAGAIN The file has been locked, or too much memory has been locked (see setrlimit(2)).
EBADF fd is not a valid file descriptor (and MAP_ANONYMOUS was not set).
EEXIST MAP_FIXED_NOREPLACE was specified in flags, and the range covered by addr and length clashes with
an existing mapping.
EINVAL We don't like addr, length, or offset (e.g., they are too large, or not aligned on a page
boundary).
EINVAL (since Linux 2.6.12) length was 0.
EINVAL flags contained none of MAP_PRIVATE, MAP_SHARED, or MAP_SHARED_VALIDATE.
ENFILE The system-wide limit on the total number of open files has been reached.
ENODEV The underlying filesystem of the specified file does not support memory mapping.
ENOMEM No memory is available.
ENOMEM The process's maximum number of mappings would have been exceeded. This error can also occur for
munmap(), when unmapping a region in the middle of an existing mapping, since this results in two
smaller mappings on either side of the region being unmapped.
ENOMEM (since Linux 4.7) The process's RLIMIT_DATA limit, described in getrlimit(2), would have been
exceeded.
ENOMEM We don't like addr, because it exceeds the virtual address space of the CPU.
EOVERFLOW
On 32-bit architecture together with the large file extension (i.e., using 64-bit off_t): the
number of pages used for length plus number of pages used for offset would overflow unsigned long
(32 bits).
EPERM The prot argument asks for PROT_EXEC but the mapped area belongs to a file on a filesystem that
was mounted no-exec.
EPERM The operation was prevented by a file seal; see fcntl(2).
EPERM The MAP_HUGETLB flag was specified, but the caller was not privileged (did not have the
CAP_IPC_LOCK capability) and is not a member of the sysctl_hugetlb_shm_group group; see the
description of /proc/sys/vm/sysctl_hugetlb_shm_group in proc_sys(5).
ETXTBSY
MAP_DENYWRITE was set but the object specified by fd is open for writing.
Use of a mapped region can result in these signals:
SIGSEGV
Attempted write into a region mapped as read-only.
SIGBUS Attempted access to a page of the buffer that lies beyond the end of the mapped file. For an
explanation of the treatment of the bytes in the page that corresponds to the end of a mapped file
that is not a multiple of the page size, see NOTES.
ATTRIBUTES
For an explanation of the terms used in this section, see attributes(7).
┌─────────────────────────────────────────────────────────────────────────────┬───────────────┬─────────┐
│ Interface │ Attribute │ Value │
├─────────────────────────────────────────────────────────────────────────────┼───────────────┼─────────┤
│ mmap(), munmap() │ Thread safety │ MT-Safe │
└─────────────────────────────────────────────────────────────────────────────┴───────────────┴─────────┘
VERSIONS
On some hardware architectures (e.g., i386), PROT_WRITE implies PROT_READ. It is architecture dependent
whether PROT_READ implies PROT_EXEC or not. Portable programs should always set PROT_EXEC if they intend
to execute code in the new mapping.
The portable way to create a mapping is to specify addr as 0 (NULL), and omit MAP_FIXED from flags. In
this case, the system chooses the address for the mapping; the address is chosen so as not to conflict
with any existing mapping, and will not be 0. If the MAP_FIXED flag is specified, and addr is 0 (NULL),
then the mapped address will be 0 (NULL).
Certain flags constants are defined only if suitable feature test macros are defined (possibly by
default): _DEFAULT_SOURCE with glibc 2.19 or later; or _BSD_SOURCE or _SVID_SOURCE in glibc 2.19 and
earlier. (Employing _GNU_SOURCE also suffices, and requiring that macro specifically would have been
more logical, since these flags are all Linux-specific.) The relevant flags are: MAP_32BIT,
MAP_ANONYMOUS (and the synonym MAP_ANON), MAP_DENYWRITE, MAP_EXECUTABLE, MAP_FILE, MAP_GROWSDOWN,
MAP_HUGETLB, MAP_LOCKED, MAP_NONBLOCK, MAP_NORESERVE, MAP_POPULATE, and MAP_STACK.
C library/kernel differences
This page describes the interface provided by the glibc mmap() wrapper function. Originally, this
function invoked a system call of the same name. Since Linux 2.4, that system call has been superseded
by mmap2(2), and nowadays the glibc mmap() wrapper function invokes mmap2(2) with a suitably adjusted
value for offset.
STANDARDS
POSIX.1-2008.
HISTORY
POSIX.1-2001, SVr4, 4.4BSD.
On POSIX systems on which mmap(), msync(2), and munmap() are available, _POSIX_MAPPED_FILES is defined in
<unistd.h> to a value greater than 0. (See also sysconf(3).)
NOTES
Memory mapped by mmap() is preserved across fork(2), with the same attributes.
A file is mapped in multiples of the page size. For a file that is not a multiple of the page size, the
remaining bytes in the partial page at the end of the mapping are zeroed when mapped, and modifications
to that region are not written out to the file. The effect of changing the size of the underlying file
of a mapping on the pages that correspond to added or removed regions of the file is unspecified.
An application can determine which pages of a mapping are currently resident in the buffer/page cache
using mincore(2).
Using MAP_FIXED safely
The only safe use for MAP_FIXED is where the address range specified by addr and length was previously
reserved using another mapping; otherwise, the use of MAP_FIXED is hazardous because it forcibly removes
preexisting mappings, making it easy for a multithreaded process to corrupt its own address space.
For example, suppose that thread A looks through /proc/pid/maps in order to locate an unused address
range that it can map using MAP_FIXED, while thread B simultaneously acquires part or all of that same
address range. When thread A subsequently employs mmap(MAP_FIXED), it will effectively clobber the
mapping that thread B created. In this scenario, thread B need not create a mapping directly; simply
making a library call that, internally, uses dlopen(3) to load some other shared library, will suffice.
The dlopen(3) call will map the library into the process's address space. Furthermore, almost any
library call may be implemented in a way that adds memory mappings to the address space, either with this
technique, or by simply allocating memory. Examples include brk(2), malloc(3), pthread_create(3), and
the PAM libraries http://www.linux-pam.org.
Since Linux 4.17, a multithreaded program can use the MAP_FIXED_NOREPLACE flag to avoid the hazard
described above when attempting to create a mapping at a fixed address that has not been reserved by a
preexisting mapping.
Timestamps changes for file-backed mappings
For file-backed mappings, the st_atime field for the mapped file may be updated at any time between the
mmap() and the corresponding unmapping; the first reference to a mapped page will update the field if it
has not been already.
The st_ctime and st_mtime field for a file mapped with PROT_WRITE and MAP_SHARED will be updated after a
write to the mapped region, and before a subsequent msync(2) with the MS_SYNC or MS_ASYNC flag, if one
occurs.
Huge page (Huge TLB) mappings
For mappings that employ huge pages, the requirements for the arguments of mmap() and munmap() differ
somewhat from the requirements for mappings that use the native system page size.
For mmap(), offset must be a multiple of the underlying huge page size. The system automatically aligns
length to be a multiple of the underlying huge page size.
For munmap(), addr, and length must both be a multiple of the underlying huge page size.
BUGS
On Linux, there are no guarantees like those suggested above under MAP_NORESERVE. By default, any
process can be killed at any moment when the system runs out of memory.
Before Linux 2.6.7, the MAP_POPULATE flag has effect only if prot is specified as PROT_NONE.
SUSv3 specifies that mmap() should fail if length is 0. However, before Linux 2.6.12, mmap() succeeded
in this case: no mapping was created and the call returned addr. Since Linux 2.6.12, mmap() fails with
the error EINVAL for this case.
POSIX specifies that the system shall always zero fill any partial page at the end of the object and that
system will never write any modification of the object beyond its end. On Linux, when you write data to
such partial page after the end of the object, the data stays in the page cache even after the file is
closed and unmapped and even though the data is never written to the file itself, subsequent mappings may
see the modified content. In some cases, this could be fixed by calling msync(2) before the unmap takes
place; however, this doesn't work on tmpfs(5) (for example, when using the POSIX shared memory interface
documented in shm_overview(7)).
EXAMPLES
The following program prints part of the file specified in its first command-line argument to standard
output. The range of bytes to be printed is specified via offset and length values in the second and
third command-line arguments. The program creates a memory mapping of the required pages of the file and
then uses write(2) to output the desired bytes.
Program source
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
#define handle_error(msg) \
do { perror(msg); exit(EXIT_FAILURE); } while (0)
int
main(int argc, char *argv[])
{
int fd;
char *addr;
off_t offset, pa_offset;
size_t length;
ssize_t s;
struct stat sb;
if (argc < 3 || argc > 4) {
fprintf(stderr, "%s file offset [length]\n", argv[0]);
exit(EXIT_FAILURE);
}
fd = open(argv[1], O_RDONLY);
if (fd == -1)
handle_error("open");
if (fstat(fd, &sb) == -1) /* To obtain file size */
handle_error("fstat");
offset = atoi(argv[2]);
pa_offset = offset & ~(sysconf(_SC_PAGE_SIZE) - 1);
/* offset for mmap() must be page aligned */
if (offset >= sb.st_size) {
fprintf(stderr, "offset is past end of file\n");
exit(EXIT_FAILURE);
}
if (argc == 4) {
length = atoi(argv[3]);
if (offset + length > sb.st_size)
length = sb.st_size - offset;
/* Can't display bytes past end of file */
} else { /* No length arg ==> display to end of file */
length = sb.st_size - offset;
}
addr = mmap(NULL, length + offset - pa_offset, PROT_READ,
MAP_PRIVATE, fd, pa_offset);
if (addr == MAP_FAILED)
handle_error("mmap");
s = write(STDOUT_FILENO, addr + offset - pa_offset, length);
if (s != length) {
if (s == -1)
handle_error("write");
fprintf(stderr, "partial write");
exit(EXIT_FAILURE);
}
munmap(addr, length + offset - pa_offset);
close(fd);
exit(EXIT_SUCCESS);
}
SEE ALSO
ftruncate(2), getpagesize(2), memfd_create(2), mincore(2), mlock(2), mmap2(2), mprotect(2), mremap(2),
msync(2), remap_file_pages(2), setrlimit(2), shmat(2), userfaultfd(2), shm_open(3), shm_overview(7)
The descriptions of the following files in proc(5): /proc/pid/maps, /proc/pid/map_files, and
/proc/pid/smaps.
B.O. Gallmeister, POSIX.4, O'Reilly, pp. 128–129 and 389–391.
Linux man-pages 6.7 2023-10-31 mmap(2)