Ubuntu Manpage: ssocr - optical recognition of seven segment displays

NAME

       ssocr - optical recognition of seven segment displays

SYNOPSIS

       ssocr [OPTION]... [COMMAND]... IMAGE

DESCRIPTION

       ssocr  reads  an  image  file containing the picture of a seven segment display, recognizes the displayed
       digits and prints them to standard output.  All image formats known by imlib2 are supported.   Use  -  as
       file name to read the image from standard input.  ssocr provides several image manipulation algorithms to
       enhance noisy images.

       Options  can be used to change ssocr behavior.  Commands can be used to manipulate the input IMAGE before
       starting the recognition algorithm.  Two hyphens (--) can be used as a special argument  to  end  option-
       scanning, e.g., in order to use a negative number as argument to a command.

OPTIONS

-h, --help
Write a help message to standard output. The default settings are shown as well.

-V, --version
Write version information to standard output.

-v, --verbose
Print information about program execution to standard error.

-t, --threshold THRESHOLD
Specify a percentage value as luminance threshold to differentiate between black and white. This
threshold is adjusted to the luminance values occurring in the image, unless option --absolute-threshold
is used. The default threshold is 50.

-a, --absolute-threshold
Do not adjust the threshold to the luminance values occurring in the image. Consider this option when
using the dynamic_threshold command.

-T, --iter-threshold
Use an iterative method (one-dimensional k-means clustering) to determine the threshold. The starting
value can be specified with the --threshold option.

-n, --number-pixels NUMBER
Set the number of foreground pixels that have to be found in a scanline to recognize a segment. This
does not apply to ratio based recognition. Can be used to ignore some noise in the picture. See the web
page of ssocr(1) for a description of the algorithm.

-N, --min-segment SIZE
Set the minimum number of pixels required for width and height of an individual segment of a seven
segment display. A set segment in the display must have both a width and height of at least SIZE pixels.
This minimum is used for both scanline based and ratio based recognition. It is not applied to decimal
separator detection, because those are not comprised of regular segments. This option can be used to
ignore some noise in the picture. See the web page of ssocr(1) for a description of the algorithm.

-i, --ignore-pixels NUMBER
Set the number of foreground pixels that are ignored when deciding if a column or row consists only of
background or foreground pixels. Can be used to ignore some noise in the picture. See the web page of
ssocr(1) for a description of the algorithm.

-M, --min-char-dims WIDTHxHEIGHT
Specify the minimum dimensions of characters respectively digits. When the segmentation step finds
potential digits, those with a width less than WIDTH or a height less than HEIGHT are ignored. Can be
used to ignore some noise in the picture. See the web page of ssocr(1) for a description of the
algorithm.

-d, --number-digits RANGE
Specifies the number of digits shown in the image. Default value is 6. Use -1 to automatically detect
the number of digits. Use a single positive number to specify an exact number of digits. Use two
positive numbers separated with a hyphen (-) to specify an inclusive range of acceptable values for the
number of digits.

-r, --one-ratio RATIO
Set the height/width ratio threshold to recognize a digit as a one. A digit with a height/width ratio
greater than RATIO is recognized as a one. RATIO takes integers only. See the web page of ssocr(1) for
a description of the algorithm.

-m, --minus-ratio RATIO
Set the width/height ratio to recognize a minus sign. A digit with a width/height ratio greater than or
equal to RATIO is recognized as a minus sign. RATIO takes integers only. This uses the same idea as
recognizing the digit one.

-H, --dec-h-ratio RATIO
Set the max_digit_height/height ratio used for recognition of a decimal separator. RATIO takes integers
only. This value is used in combination with the max_digit_width/width ratio. If the height of a digit
is less than 1/RATIO of the maximum digit height in the image and the max_digit_width/width threshold is
also reached, it is recognized as a decimal separator.

-W, --dec-w-ratio RATIO
Set the max_digit_width/width ratio used for recognition of a decimal separator. RATIO takes integers
only. This value is used in combination with the max_digit_height/height ratio. If the width of a digit
is less than 1/RATIO of the maximum digit width in the image and the max_digit_height/height threshold is
also reached, it is recognized as a decimal separator.

-o, --output-image FILE
Write the processed image to FILE. Use - to write to standard output. Unless this option is used no
image is written to disk. If a standard filename extension is used it is interpreted as the image format
to use. Can be useful together with the --process-only option.

-O, --output-format FORMAT
Specify the image format to use with --output-image. This format must be recognized by imlib2. Standard
filename extensions are used to describe the format. Overwrites the image file format automatically
determined via the filename. If no format is specified via this option or the filename, png is used.

-p, --process-only
Use ssocr(1) as an image manipulation program. No image recognition is performed. Should be used
together with the -B --output-image option.

-D, --debug-image[=FILE]
Write a debug image showing the results of thresholding, segmentation and character recognition to disk.
The image is written to the file testbild.png unless a filename FILE is given. This debug image often
helps in understanding why ssocr(1) does not recognize the number from a given image.

-P, --debug-output
Print information helpful for debugging to standard error.

-f, --foreground COLOR
Specify the foreground color (either black or white). This automatically sets the background color as
well. Default is black.

-b, --background COLOR
Specify the background color (either black or white). This automatically sets the foreground color as
well. Default is white.

-I, --print-info
Prints image dimensions and range of used luminance values to standard error.

-g, --adjust-gray
Interpret the values T1 and T2 given to the command gray_stretch as percentages instead of absolute
luminance values.

-l, --luminance KEYWORD
Choose the type of luminace computation. Using help as KEYWORD prints the list of implemented luminance
keywords with a short description of the used formula. The default of Rec709 should work well in most
cases.

-s, --print-spaces
Print space characters between digits (characters) that are farther apart than a factor times the minimum
(default) or average distance between digits (characters).

-A, --space-factor FACTOR
Use the given FACTOR instead of the default value to determine white space between digits (characters).

-G, --space-average
Use the average distance between digits (characters) instead of the minimum distance to determine white
space between digits.

-S, --ascii-art-segments
Prints the recognized segments, i.e. the display as seen by ssocr, as ASCII art to standard error.

-X, --print-as-hex
Prints the recognized segments as a string of hexadecimal numbers separated by a colon instead of digits
and characters. Each number comprises two hexadecimal digits (one byte). 0x01 represents the upper
horizontal segment, 0x02 represents the upper left vertical segment, 0x04 represents the upper right
vertical segment, 0x08 represents the middle horizontal segment, 0x10 represents the lower left vertical
segment, 0x20 represents the lower right vertical segment, 0x40 represents the lower horizontal segment,
0x80 represents a decimal point (or comma or thousands separator). Each hexadecimal number printed is
the logical or of the set segments.

-C, --omit-decimal-point
Omit decimal points from output. Decimal points are still recognized and counted against the number of
digits. This can be used together with automatically detecting the number of digits to ignore isolated
groups of pixels in an image.

-c, --charset KEYWORD
Select the set of characters that ssocr shall recognize. This affects, e.g., if a display showing a six
with missing top segment is recognized as 6 (with digits and decimal) or b (with hexadecimal and full).
Using help as KEYWORD prints the list of implemented character set keywords with a short description of
the included characters. The default is full (recognizing all characters known to ssocr in the image).

COMMANDS

Most commands do not change the image dimensions. The crop command is a notable exception to this rule.

dilation [N]
Filter image using dilation algorithm. Any pixel with at least one neighbour pixel set in the source
image will be set in the filtered image. If a number N > 1 is specified, the dilation algorithm is
executed N times.

erosion [N]
Filter image using erosion algorithm. Any pixel with every neighbour pixel set in the source image will
be set in the filtered image. If a number N > 1 is specified, the erosion algorithm is executed N times.

closing [N]
Filter image using closing algorithm, i.e. erosion and then dilation. If a number N > 1 is specified, N
times dilation and then N times erosion is executed.

opening [N]
Filter image using opening algorithm, i.e. dilation and then erosion. If a number N > 1 is specified, N
times dilation and then N times erosion is executed.

remove_isolated
Remove any foreground pixels without neighbouring foreground pixels.

make_mono
Convert the image to monochrome using thresholding. The threshold can be specified with option
--threshold and is adjusted to the used luminance interval of the image unless option
--absolute-threshold is used.

grayscale
Transform image to gray values using luminance. The formula to compute luminance can be specified using
option --luminance.

invert
Set every foreground pixel to background color and vice versa.

gray_stretch T1 T2
Transform image so that the luminance interval [ T1,T2 ] is projected to [ 0,255 ] with any value below
T1 set to 0 and any value above T2 set to 255. Together with the option --adjust-gray, the values T1 and
T2 are interpreted as percentages.

dynamic_threshold W H
Convert the image to monochrome using dynamic thresholding a.k.a local adaptive thresholding. A window
of width W and height H around the current pixel is used to determine the (local) thresholding value.
Consider using the --absolute-threshold option together with a manually adjusted --threshold for
predictable results.

rgb_threshold
Convert the image to monochrome using simple thresholding for every color channel. This is the same as
--luminance=minimum make_mono. You should use --luminance=minimum and make_mono or dynamic_threshold
instead.

r_threshold
Convert the image to monochrome using simple thresholding. Only the red color channel is used. This is
the same as --luminance=red make_mono. You should use --luminance red and make_mono or dynamic_threshold
instead.

g_threshold
Convert the image to monochrome using simple thresholding. Only the green color channel is used. This
is the same as --luminance=green make_mono. You should use --luminance green and make_mono or
dynamic_threshold instead.

b_threshold
Convert the image to monochrome using simple thresholding. Only the blue color channel is used. This is
the same as --luminance=blue make_mono. You should use --luminance blue and make_mono or
dynamic_threshold instead.

white_border [WIDTH]
The border of the image is set to the foreground color. This border is one pixel wide unless a WIDTH > 1
is specified.

shear OFFSET
Shear the image OFFSET pixels to the right. The OFFSET is used at the bottom. Image dimensions do not
change, pixels in background color are used for pixels that are outside the image and shifted inside.
Pixels shifted out of the image are dropped. Many seven segment displays use slightly skewed digits,
this command can be used to compensate this. Sometimes ssocr(1) cannot separate a decimal point from the
preceding digit without shearing the image.

rotate THETA
Rotate the image THETA degrees clockwise around the center of the image. Image dimensions do not change,
pixels rotated out of the image area are dropped, pixels from outside the image rotated into the new
image are set to the background color.

mirror { horiz | vert }
Mirror the image horizontally or vertically.

crop X Y W H
Use only the subpicture with upper left corner ( X,Y ), width W and height H. This command changes the
image dimensions.

set_pixels_filter MASK
Set every pixel in the filtered image that has at least MASK neighbour pixels set in the source image.

keep_pixels_filter MASK
Keep only those foreground pixels in the filtered image that have at least MASK neighbour pixels set in
the source image (not counting the checked pixel itself).

LUMINANCE KEYWORDS

       •      rec601

       •      rec709

       •      linear

       •      minimum

       •      maximum

       •      red

       •      green

       •      blue

CHARACTER SET KEYWORDS

       •      full

       •      digits

       •      decimal

       •      hex

       •      tt_robot

EXIT STATUS

       •      0, if the correct number of digits have been recognized

       •      1, if an incorrect number of digits have been found

       •      2, if not all digits have been recognized

       •      3, if only image processing was requested and successful

       •      42, if help or version info was requested

       •      99, if some other error occurred

ENVIRONMENT

       TMP can be used to specify a different directory for temporary files than /tmp.

BUGS

       Imlib2 (and therefore ssocr(1)) does not work well with Netpbm(1) images.

AUTHOR

       ssocr was written by Erik Auerswald <auerswal@unix-ag.uni-kl.de>.

COPYRIGHT

       Copyright   ©   2004-2023   Erik   Auerswald.    License   GPLv3+:   GNU   GPL   version   3   or   later
       https://gnu.org/licenses/gpl.html.
       This is free software: you are free to change and redistribute it.  There is NO WARRANTY, to  the  extent
       permitted by law.