Provided by: simrisc_15.05.00-1build1_amd64 
NAME
simrisc - This program performs simulations in the context of breast and lung cancer
SYNOPSIS
simrisc [options] analyses
The analyses argument is the name of the file specifying the analyses to perform. See section ANALYSES
for details.
DESCRIPTION
Simrisc was originally designed around 2010 by Marcel Greuter at the University Medical Center Groningen,
and thereafter modified in 2015 by Chris de Jonge.
OPTIONS
Short options are provided between parentheses, immediately following their long option equivalents.
Several parameters specify the path-names of files produced by simrisc. If a path-name starts with a
tilde character (~) then the tilde is replaced by the user’s home directory. An initial + is replaced by
the program’s base directory (see option base). When an analysis uses multiple iterations then `$’
characters in filename specifications are replaced by the analysis’ interation index.
All single-letter options referring to filesystem entries (directories, filenames) are capitalized, all
other single-letter options are lowercase.
o --base=basedir (-B)
the base directory where the output files will be written. By default ./. If basedir doesn’t exist
it is created by the program. If the directory cannot be created and exception is thrown,
terminating the program. The basedir specifications may specify relative or absolute directory
locations;
o --cancer=type (-c)
The simulation type (type) can be specified as breast to perform breast cancer simulations. Breast
cancer simulations are performed by default when the --cancer option is not specified.
Alternatively, to perform lung cancer simulations type must be specified as either male or female
to perform simulations for, respectively, male or female cases.
Be advised that the default configuration file specifies Screening Mammo rounds, which must either
be changed to CT in locally used configuration files or in Analysis: sections (see section
ANALYSES below);
o --config=path (-C)
the location of the configuration file. By default ~/.config/simrisc’ is used;
o --data=path (-D)
path name of the file to contain the data of the cases generated by the simulation (default:
’<base>/data-$.txt’). If a data file should not be written specify ! (mnemonic: the logical not
operator, i.e., --data !). See section OUTPUT for a description of the generated data;
o --death-age=age (-a)
run one simulation using a specific natural death-age. This option also requires the
specification of tumor-age, and is mutually exclusive with the case option;
o --help (-h)
shows help information and terminates;
o --last-case=nCases (-l)
perform simulations until nCases cases have been analyzed and only write the data for the final
case to the data file. The rounds and sensitivity files contain the summarized results of all
nCases analyzed cases;
o --log begin end fname [set]
log process actions of cases begin thru end on the file fname. This includes generated random
values. Random values generated in several contexts can be suppressed. Specify
* C to suppress generated case-specific uniformly distributed random values
* L to suppress generated log-normal distributed random values
* U to suppress generated uniformly distributed random values not associated with cases
* V to suppress generated uniformly distributed random values associated with VSD computations.
Note that begin end defines an inclusive range. To log the process for a single case (e.g. case
100) ignoring the L, U, and V generated values specify --log "100 100 fname LUV". Also note that
only a single argument ispassed to --log. Therefore its argument must be surrounded by quotes;
o --one-analysis (-o)
the program’s arguments specify the parameters of a single analysis, rather than the name of an
analyses-specification file. The program’s arguments are optional and are used to alter the
parameter values as defined in the config file or to define label specifications. See section
ANALYSES for details;
o --parameters=path (-P)
path name of the file showing the actually used parameter specifications. By default no parameter
file is written. If the --base (-B) option was specified then path is written in the base
directory if path does not contain a slash (/) (use ./path to write the parameters file in the
current directory if --base was specified);
o --rounds=path (-R)
path name of the file to containing the summary info of the simulation rounds (default:
’<base>/rounds-$.txt’). If a rounds file should not be written specify ! (i.e., --rounds !). See
section OUTPUT for a description of the generated summary info;
o --spread=path (-s)
path name of the file containing the configured and actually used parameter values when spread:
true is specified (default: ’<base>/spread-$.txt’). If this file should not be written specify !
(mnemonic: the logical not operator, i.e., --spread !). If a parameter doesn’t use spreading then
the ’using’ part is omitted. See section OUTPUT for a sample of its content;
o --sensitivity=path (-S)
path name of the file to containing the summary info of the simulation’s sensitivity data
(default: ’<base>/sensitivity.txt’). If a sensitivity file should not be written specify ! (i.e.,
--sensitivity !). See section OUTPUT for a description of the produced sensitivity summary;
o --tnm (-T)
The data file contains a column labeled TNM showing the (0-based) TNM categories for cases having
developed tumors. By default this column remains empty for cases not having developed tumors,
which may be inconvenient when processing the data (e.g., to perform statistical analyses). When
specifying the --tnm option cases not having developed tumors receive TNM column entries -1,0 to
avoid missing data;
o --tumor-age=age (-t)
run one simulation using a specific tumor self-detect age. This option also requires the
specification of death-age, and is mutually exclusive with the case option;
o --verbose (-V)
provides additional information while running;
o --version (-v)
shows simrisc’s version information and terminates;
ANALYSES
Unless the --one-analysis option is used the program’s first and only required argument is the name of a
file providing the details of the analyses to perform. These files are called analysis files. These files
must be a standard ascii text files. I.e., they can only contain 7-bit ascii printable and white-space
characters. Identifiers used in analysis files and in configuration files are interpreted case
sensitively.
Configuration specifications starting with uppercase letters (like Scenario: and Costs:) specify
(sub)sections and don’t contain additional specifications. Specifications starting with lowercase letters
(like ageGroup:) are followed by actual parameter values. For a complete overview refer to the
simriscparams(7) man-page.
Analysis files may define multiple analyses. Each analysis specification must begin with a line
containing
Analysis:
At each Analysis: specification the program’s initial configuration is reset.
Options specified on the command-line cannot be specified in Analysis: sections and remain active while
simrisc is running. The default option values are reset at each separate Analysis: unless an option has
been specified on the command-line, in which case those option values are used throughout the simrisc
run.
Following Analysis: lines the characteristics of the analysis are specified which can be specified for
each Analysis: specification, in the following order:
o a label: line: label: lines, when used, must immediately follow Analysis: lines. The text
following label: is written at the top of the output files;
o option lines: specifying simrisc options (not specified on the command line) which are then used
for that analysis. When program options are specified their long option names must be used. E.g.:
base: /tmp/
last-case: 20
o parameter specifications: modify (some) parameter specifications defined in configuration files.
When parameters of configuration file sections (cf. simriscparams(7)) are not specified then the
parameters specified in the configuration file are used.
All specifications in Analysis: sections are optional. An Analysis: section merely containing the line
Analysis: defines an analysis using the explicitly specified command-line options or the default program
options and using the parameter specifications provided in the configuration file.
Empty lines, initial and trailing white-space, and all characters on lines starting at the hash-mark (#)
are ignored and may be used anywhere in analysis files.
Lines not conforming to the above description result in error messages, causing simrisc to end.
Filename specified in Analysis: sections may start with a tilde character (~) which is replaced by the
user’s home directory, or they may start with an initial + character, which is replaced by the program’s
base directory (see option base). When an analysis performs multiple iterations then `$’ characters in
filename specifications are replaced by the analysis’ interation index.
Multiple analysis sections should not specify identically named output files, as the output files are
(re)written for each separate analysis.
Analysis sections are commonly used to alter the default specifications of the configuration file. E.g.,
the default number of iterations equals 1. By specifying
Scenario:
iterations: 3
the analysis performs 3 iterations.
Parameters are either read from the configuration file or they are redefined in Analysis: sections. E.g.,
in de provided configuration file screening rounds use two-year intervals between the ages of 50 and 74.
To use screening rounds using 5-year intervals, between ages 50 and 65, then an Analysis: specification
could be, e.g.,
Screening:
round: 50 Mammo MRI
round: 55 Mammo MRI
round: 60 Mammo MRI
round: 65 Mammo MRI
When the --one-analysis option is used parameters are modified by providing comma-separated parameter
specifications as program command-line arguments. E.g., to perform one analysis, writing the data file to
/tmp/data, simulating 1000 cases, and using 20 as seed for the random number generator the command
simrisc -D /tmp/data -o Scenario:, cases: 1000, seed: 20
can be used. Note that when using the one-analysis option parameter section names must precede parameter
specifications. E.g., since the parameters cases and seed are defined in the `Scenario’ section (cf.
simriscparams(7)) they must be preceded by the Scenario: specification.
When an Analysis: specification modifies parameters, then subsequent Analysis: sections start from the
unmodified option and parameter specifications.
Here is an example of an analysis file specifying two analyses:
Analysis:
base: 1
cancer: male
parameters: +params.txt
Scenario:
cases: 10
Screening:
round: 50 CT
round: 55 CT
Analysis:
base: 2
config: ~/src/simrisc/stdconfig/lung
parameters: +params.txt
cancer: breast
Scenario:
cases: 20
spread: true
Screening:
round: 50 Mammo MRI
round: 55 Mammo MRI
round: 60 Mammo MRI
round: 65 Mammo MRI
OUTPUT
The first lines of the generated files contain time stamps showing the date and time when the files were
written and the used SimRisc version. Here is an example, following the RFC 2822 format for the
timestamp:
Mon, 14 Nov 2022 15:30:26 +0100 (SimRisc V. 15.00.00)
If label: lines are used then the time stamp is followed by the label specifications, which is then
followed by an empty line. After this header the file’s specific data are shown.
The data in all files (except for the file listing the actually used parameters (option --parameters
(P))) are written using the standard comma-separated format (cf. RFC 4180). The initial lines contain
table headings and column labels documenting the meanings of the various columns. Likewise there is a
final line ending the tables.
Data of simulated cases
For each simulated case the values of the following variables are written to file (one line of
comma-separated values per simulated case):
o case: the (0-based) case-index;
o cause of death: either Natural or Tumor;
o death age: the case’s age of death;
o natural death age: the case’s natural age of death (if no tumor occurs);
o death status: a numeric index specifying how and at what stage the case died:
1: natural death in the pre-screening phase,
2: natural death in the screening phase,
3: natural death in the post-screening phase,
4: tumor caused death in the pre-screening phase,
5: tumor caused death in the screening phase,
6: tumor caused death in the post-screening phase;
o tumor present: Yes if the simulation resulted in a tumor, No if no tumor occurred;
o tumor detected: Yes if the tumor was detected, No if not;
o interval tumor: Yes if the tumor was an interval tumor, No if not;
o tumor diameter: the tumor’s diameter in mm when it was detected. 0.00 is shown if no tumor
occurred. In the exceptional case where the simulation produced a tumor whose diameter exceeded
1000 mm the value 1001 is shown.
o tumor doubling days: the time (in days) it takes for the tumor to double its size;
o tumor preclinical period: the age at which the tumor is potentially detectible by screening;
o tumor onset age: the age at which the tumor first occurred;
o tumor self-detect age: the age at which the tumor was self-detected. This age is the result of the
simulation, and may exceed the case’s actual death age (if so, the case’s data report that no
tumor is present);
o tumor death age: the age at which the tumor caused or would have caused he case’s death. The
simulation process uses ages ranging from 0 through 100. If the age at which the tumor causes the
case’s death exceeds 100, then 100.00 is reported;
o costs: the case’s screening and (if appliccable) treatment costs;
o self-detection indicator: 1 if the tumor was self-detected, 0 if not (also if there’s no tumor);
o detection round: 0-based round index at which the tumor was detected (or 1) if the tumor was
self-detected, 0 if not (also if there’s no tumor).
o screening rounds: this column contains show which screening rounds were attended by the simulated
cases, and if so whether false negative or false positive diagnoses were made. The following
digits are used:
o 0: the case did not attend this screening round;
o 1: the case did attend this screening round;
o 2: the case did attend this screening round, resulting in a false negative diagnosis;
o 3: the case did attend this screening round, resulting in a false positive diagnosis. There are
as many digits as screening rounds. The leftmost digit refers to the first screening round, the
rightmost digit to the last screening round. E.g., using 12 screening rounds the following
indicators could be obtained:
0011311110000
Using screening round indices (which are also used to refer to rounds in the rounds-$.txt files),
this case did not attent screening rounds 0, 1, 9, 10, 11 and 12, and at 4 a false positive
diagnosis was obtained. Note that the screening round indices start at 0: the first screening
round is indicated by index 0.
Actually used spread-values
When spread: true is specified then by default the actually used and orgiginal parameter values are
written to the file spread-$.txt, where $ is replaced by the loop’s iteration index. Here is a sample
from the content of such a file, showing the values of the Tumor: DoublingTime: agegroups parameters:
Tumor:
DoublingTime
ageGroup: 1 - 50 configured: 4.38, using: 3.41972
ageGroup: 50 - 70 configured: 5.06, using: 4.83591
ageGroup: 70 - * configured: 5.24, using: 5.30492
o ~/.config/simrisc: the default location of the program’s configuration file;
o the simrisc distribution archive contains the default configuration file as
simrisc-VERSION/stdconfig/simrisc, where VERSION is replaced by simrisc’s actual release version;
o when installing simrisc using Linux distribution archives (e.g., .deb files) the default
configuration file is commonly available as /usr/shared/doc/simrisc/simrisc.gz
SEE ALSO
simriscparams(7)
BUGS
Versions before version 15.03.00 should not be used for lung cancer simulations. The bug invalidating
lung cancer simulations was repaired in version 15.03.00.
COPYRIGHT
This is free software, distributed under the terms of the GNU General Public License (GPL).
AUTHOR
Frank B. Brokken (f.b.brokken@rug.nl),
simrisc.15.05.00 2020-2024 simrisc(1)