NAME

       sensors - print sensors information

SYNOPSIS

       sensors [ options ] [ chips ]
       sensors -s [ chips ]
       sensors --bus-list

DESCRIPTION

       sensors is used to show the current readings of all sensor chips.
       sensors -s is used to set all limits as specified in the configuration file.
       sensors --bus-list is used to generate bus statements suitable for the configuration file.

OPTIONS

       -c, --config-file config-file
              Specify  a configuration file.  If no file is specified, the libsensors default configuration file
              is used.  Use `-c /dev/null' to temporarily disable this default configuration file.

       -h, --help
              Print a help text and exit.

       -s, --set
              Evaluate all `set' statements in the configuration file and exit.  You must be `root' to do  this.
              If this parameter is not specified, no `set' statement is evaluated.

       -A, --no-adapter
              Do not show the adapter for each chip.

       -u     Raw output.  This mode is suitable for debugging and for post-processing of the output by scripts.
              It  is  also  useful  when writing a configuration file because it shows the raw input names which
              must be referenced in the configuration file.

       -j     Json output.  This mode is suitable for post-processing of the output by scripts.

       -v, --version
              Print the program version and exit.

       -f, --fahrenheit
              Print the temperatures in degrees Fahrenheit instead of Celsius.

       --bus-list
              Generate bus statements suitable for using in sensors.conf.  Such bus statements are  only  needed
              if  you  have  several chips sharing the same address on different buses of the same type.  As bus
              numbers are usually not guaranteed to be stable over reboots, these statements let  you  refer  to
              each bus by its name rather than numbers.

FILES

       /etc/sensors3.conf
       /etc/sensors.conf
              The system wide configuration file.  See sensors.conf(5) for further details.

SEE ALSO

       sensors.conf(5), sensors-detect(8).

AUTHOR

       Frodo Looijaard and the lm_sensors group https://hwmon.wiki.kernel.org/lm_sensors

lm-sensors 3                                      November 2012                                       sensors(1)