Provided by: texlive-bibtex-extra_2023.20240207-1_all 
NAME
ltx2crossrefxml.pl - create XML files for submitting to crossref.org
SYNOPSIS
ltx2crossrefxml [-c config_file] [-o output_file] [-input-is-xml]
latex_file1 latex_file2 ...
OPTIONS
-c config_file
Configuration file. If this file is absent, defaults are used. See below for its format.
-o output_file
Output file. If this option is not used, the XML is output to stdout.
-rpi-is-xml
Do not transform author and title input strings, assume they are valid XML.
The usual "--help" and "--version" options are also supported. Options can begin with either "-" or "--",
and ordered arbitrarily.
DESCRIPTION
For each given latex_file, this script reads ".rpi" and (if they exist) ".bbl" files and outputs
corresponding XML that can be uploaded to Crossref (<https://crossref.org>). Any extension of latex_file
is ignored, and latex_file itself is not read (and need not even exist).
Each ".rpi" file specifies the metadata for a single article to be uploaded to Crossref (a
"journal_article" element in their schema); an example is below. These files are output by the
"resphilosophica" package (<https://ctan.org/pkg/resphilosophica>), but (as always) can also be created
by hand or by whatever other method you implement.
Any ".bbl" files present are used for the citation information in the output XML. See the CITATIONS
section below.
Unless "--rpi-is-xml" is specified, for all text (authors, title, citations), standard TeX control
sequences are replaced with plain text or UTF-8 or eliminated, as appropriate. The
"LaTeX::ToUnicode::convert" routine is used for this (<https://ctan.org/pkg/bibtexperllibs>). Tricky TeX
control sequences will almost surely not be handled correctly. If "--rpi-is-xml" is given, the author and
title strings from the rpi files are output as-is, assuming they are valid XML; no checking is done.
Citation text from ".bbl" files is always converted from LaTeX to plain text.
This script just writes an XML file. It's up to you to actually do the uploading to Crossref; for
example, you can use their Java tool "crossref-upload-tool.jar"
(<https://www.crossref.org/education/member-setup/direct-deposit-xml/https-post>). For the definition of
their schema, see <https://data.crossref.org/reports/help/schema_doc/4.4.2/index.html> (this is the
schema version currently followed by this script).
CONFIGURATION FILE FORMAT
The configuration file is read as Perl code. Thus, comment lines starting with "#" and blank lines are
ignored. The other lines are typically assignments in the form (spaces are optional):
$variable = value ;
Usually the value is a "string" enclosed in ASCII double-quote or single-quote characters, per Perl
syntax. The idea is to specify the user-specific and journal-specific values needed for the Crossref
upload. The variables which are used are these:
$depositorName = "Depositor Name";
$depositorEmail = 'depositor@example.org';
$registrant = 'Registrant'; # organization name
$fullTitle = "FULL TITLE"; # journal name
$issn = "1234-5678"; # required
$abbrevTitle = "ABBR. TTL."; # optional
$coden = "CODEN"; # optional
For a given run, all ".rpi" data read is assumed to belong to the journal that is specified in the
configuration file. More precisely, the configuration data is written as a "journal_metadata" element,
with given "full_title", "issn", etc., and then each ".rpi" is written as "journal_issue" plus
"journal_article" elements.
The configuration file can also define one Perl function: "LaTeX_ToUnicode_convert_hook". If it is
defined, it is called at the beginning of the procedure that converts LaTeX text to Unicode, which is
done with the LaTeX::ToUnicode module, from the "bibtexperllibs" package
(<https://ctan.org/pkg/bibtexperllibs>). The function must accept one string (the LaTeX text), and return
one string (presumably the transformed string). The standard conversions are then applied to the returned
string, so the configured function need only handle special cases, such as control sequences particular
to the journal at hand.
RPI FILE FORMAT
Here's the (relevant part of the) ".rpi" file corresponding to the "rpsample.tex" example in the
"resphilosophica" package (<https://ctan.org/pkg/resphilosophica>):
%authors=Boris Veytsman\and A. U. Th{\o }r\and C. O. R\"espondent
%title=A Sample Paper:\\ \emph {A Template}
%year=2012
%volume=90
%issue=1--2
%startpage=1
%endpage=1
%doi=10.11612/resphil.A31245
%paperUrl=http://borisv.lk.net/paper12
%publicationType=full_text
Other lines, some not beginning with %, are ignored (and not shown). For more details on processing, see
the code.
The %paperUrl value is what will be associated with the given %doi (output as the "resource" element).
Crossref strongly recommends that the url be for a so-called landing page, and not directly for a pdf
(<https://www.crossref.org/education/member-setup/creating-a-landing-page/>). Special case: if the url
is not specified, and the journal is Res Philosophica, a special-purpose search url using pdcnet.org is
returned. Any other journal must always specify this.
The %authors field is split at "\and" (ignoring whitespace before and after), and output as the
"contributors" element, using "sequence="first"" for the first listed, "sequence="additional"" for the
remainder.
If the %publicationType is not specified, it defaults to "full_text", since that has historically been
the case; "full_text" can also be given explicitly. The other values allowed by the Crossref schema are
"abstract_only" and "bibliographic_record". Finally, if the value is "omit", the "publication_type"
attribute is omitted entirely from the given "journal_article" element.
Each ".rpi" must contain information for only one article, but multiple files can be read in a single
run. It would not be difficult to support multiple articles in a single ".rpi" file, but it makes
debugging and error correction easier when each uploaded XML contains a single article.
MORE ABOUT AUTHOR NAMES
The three formats for names recognized are (not coincidentally) the same as BibTeX:
First von Last
von Last, First
von Last, Jr., First
The forms can be freely intermixed within a single %authors line, separated with "\and" (including the
backslash). Commas as name separators are not supported, unlike BibTeX.
In short, you may almost always use the first form; you shouldn't if either there's a Jr part, or the
Last part has multiple tokens but there's no von part. See the "btxdoc" (``BibTeXing'' by Oren Patashnik)
document for details.
In the %authors line of a ".rpi" file, some secondary directives are recognized, indicated by "|"
characters. Easiest to explain with an example:
%authors=|organization|\LaTeX\ Project Team \and Alex Brown|orcid=123
Thus: 1) if "|organization|" is specified, the author name will be output as an "organization"
contributor, instead of the usual "person_name", as the Crossref schema requires.
2) If "|orcid=value|" is specified, the value is output as an "ORCID" element for that "person_name".
These two directives, "|organization"| and "|orcid|" are mutually exclusive, because that's how the
Crossref schema defines them. The "=" sign after "orcid" is required, while all spaces after the "orcid"
keyword are ignored. Other than that, the ORCID value is output literally. (E.g., the ORCID value of 123
above is clearly invalid, but it would be output anyway, with no warning.)
Extra "|" characters, at the beginning or end of the entire %authors string, or doubled in the middle,
are accepted and ignored. Whitespace is ignored around all "|" characters.
CITATIONS
Each ".bbl" file corresponding to an input ".rpi" file is read and used to output a "citation_list"
element for that "journal_article" in the output XML. If no ".bbl" file exists for a given ".rpi", no
"citation_list" is output for that article.
The ".bbl" processing is rudimentary: only so-called "unstructured_citation" references are produced for
Crossref, that is, the contents of the citation (each paragraph in the ".bbl") is dumped as a single flat
string without markup.
Bibliography text is unconditionally converted from TeX to XML, via the method described above. It is not
unusual for the conversion to be incomplete or incorrect. It is up to you to check for this; e.g., if
any backslashes remain in the output, it is most likely an error.
Furthermore, it is assumed that the ".bbl" file contains a sequence of references, each starting with
"\bibitem{KEY}" (which itself must be at the beginning of a line, preceded only by whitespace), and the
whole bibliography ending with "\end{thebibliography}" (similarly at the beginning of a line). A
bibliography not following this format will not produce useful results. Bibliographies can be created by
hand, or with BibTeX, or any other method.
The "key" attribute for the "citation" element is taken as the KEY argument to the "\bibitem" command.
The sequential number of the citation (1, 2, ...) is appended. The argument to "\bibitem" can be empty
("\bibitem{}", and the sequence number will be used on its own. Although TeX will not handle empty
"\bibitem" keys, it can be convenient when creating a ".bbl" purely for Crossref.
The ".rpi" file is also checked for the bibliography information, in this same format.
Feature request: if anyone is interested in figuring out how to generate structured citations
(<https://data.crossref.org/reports/help/schema_doc/5.3.1/schema_5_3_1.html#citation>) instead of these
flat text dumps, that would be great. Except the schema seems to support much less than described at
<https://www.crossref.org/documentation/principles-practices/best-practices/bibliographic/>? Anyway, the
most viable approach is probably to change tugboat.bst to output no-op TeX commands like \tubibauthor,
\tubibtitle, etc. (a la biblatex), and use those commands to discern the various crossref field values.
We can't start from the .bib because then we'd have to reimplement Bib(La)TeX.
EXAMPLES
ltx2crossrefxml.pl ../paper1/paper1.tex ../paper2/paper2.tex \
-o result.xml
ltx2crossrefxml.pl -c myconfig.cfg paper.tex -o paper.xml
AUTHOR
Boris Veytsman <https://github.com/borisveytsman/crossrefware>
COPYRIGHT AND LICENSE
Copyright (C) 2012-2024 Boris Veytsman
This is free software. You may redistribute copies of it under the terms of the GNU General Public
License (any version) <https://www.gnu.org/licenses/gpl.html>. There is NO WARRANTY, to the extent
permitted by law.
2024-02-03 ltx2crossrefxml(1)