Provided by: libinput-tools_1.25.0-1ubuntu3.1_amd64 bug

NAME

       libinput-analyze-per-slot-delta - analyze the per-event delta movement for touch slots

SYNOPSIS

       libinput analyze per-slot-delta [--help] [options] recording.yml

DESCRIPTION

       The  libinput  analyze  per-slot-delta tool analyzes a recording made with libinput record and prints the
       delta movement per touch slot.

       This is a debugging tool only, its output may change at any time. Do not rely on the output.

OPTIONS

       --help  Print help

       --ignore-below=<units or mm>
               Ignore any movement below the given threshold. The threshold is in mm if --use-mm is selected  or
               in device units otherwise.

       --threshold=<units or mm>
               Color any movement above this threshold in red. The threshold is in mm if --use-mm is selected or
               in device units otherwise.

       --use-mm
               Print data in mm instead of device units

       --use-st
               Use the single-touch ABS_X/ABS_Y instead of the multitouch axes

       --use-absolute
               Print absolute coordinates, not deltas

OUTPUT

       An  example  output for a single finger touch on a touchpad supporting two slots is below. This output is
       with the use of the --use-mm flag.

        0.000000   +0ms TOU:     ++++++     |  ************* |
        0.021900  +21ms TOU: →↘ +1.10/+0.14 |  ************* |
        0.033468  +11ms TOU: →↘ +1.15/+0.19 |  ************* |
        0.043856  +10ms TOU: →↘ +1.76/+0.22 |  ************* |
        0.053237   +9ms TOU: →↘ +2.20/+0.19 |  ************* |

       The entry ++++++ indicates a finger has been put down, ------ indicates the finger has lifted.  The left-
       most column is the absolute timestamp in seconds.microseconds followed by the relative time of the  event
       to the previous event.

       The  word  TOU  in this example represents BTN_TOUCH, similar abbreviations exist for BTN_TOOL_DOUBLETAP,
       BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP, and BTN_TOOL_QUINTTAP.

       The arrows indicate the approximate direction on a 16-point compass, in this example EastSouthEast.

       Each multitouch slot supported by the hardware has one column, where the column shows  asterisk  ********
       no  finger  is  down  for  that slot. Where the column shows spaces only, a finger is down but no data is
       currently available.

       In the above example, the third events occurs ~33ms into the recording, is 11ms after the previous  event
       and  has  an  east south-east direction. The movement for this event was x: 1.15 and y: 0.19 mm. A second
       finger is not currently down.

LIBINPUT

       Part of the libinput(1) suite

                                                                              libinput-analyze-per-slot-delta(1)