Provided by: plc-utils-extra_0.0.6+git20230504.1ba7d5a0-1_amd64 
NAME
efsu - Ethernet Frame Send Utility
SYNOPSIS
efsu [options] file [file] [...]
efsu [options] [<stdin]
DESCRIPTION
Sends custom Ethernet frames over a specific host Ethernet interface.
A frame is specified as a text stream of hexadecimal octets read from one or more frame description files
or from stdin. Each octet is converted to a binary byte, buffered and transmitted over the network on
the specified host interface. The program assumes that frames are valid and will transmit whatever you
specify, right or wrong. The program only checks minimum and maximum frame length.
Frame descriptions are stored as plain text files. Multiple frames may be specified in one file by
separating them with a semicolon. All descriptions in a file are read and sent immediately but multiple
files may be specified on the command line and options allow pauses between files, command line
repetition and pauses between command line iterations.
A frame descriptions is a continuous stream of hexadecimal digits. Intervening text, punctuation, white
space and comments are discarded. Hex characters inside script-style, C-style or C++-style comments are
ignored. Script-style comments include all characters between a hash ('#') and the next newline or EOF.
C-style and C++-style comments follow normal language rules. Comments may be used to document frame
descriptions or hide frame segments. In the end, there must be an even number of hex digits that
represent 60 to 1518 octets;
OPTIONS
-d address
Replace the destination Ethernet address of each transmitted frame with the option argument. The
destination address consists of 12 hex digits in upper, lower or mixed case. Octets may be
seperated with colons for clarity but colons are not required.
-e ethertype
Echo received frames having ethertype. This effectively filters received frames but does not
filter transmitted frames. The ethertype is expressed in hexadecimal without the "0x" prefix.
The keyword "hp10" can be used for 887B and keyword "hpav" can be used for 88E1.
-h Replace the source address of each transmitted frame with the Ethernet address of the host
interface used to send the frame. This allows frames to be sent correctly from any host
interface. Use option -i to specify an interface.
-i interface
The host interface used to send frames. The default is "eth1" because most people use "eth0" as
their principle network connection; however, if the string "PLC" is defined in the environment
then it will over-ride the program default. Any interface specified on the command line will
over-ride the default.
-l count
Repeat command line count times by re-sending all files each time. The default is 1.
-p seconds
Pause between each file on the command line. The default is 0 seconds.
-t timer
Read timeout in milliseconds. Values range from 0 through UINT_MAX. This is the maximum time
allowed for a response. The default is 50 milliseconds.
-v Dumps transmitted frames on stdout as they are sent. If an Ethertype was specified using option
-e the received frames having that Ethertype will also be dumped.
-w seconds
Wait between command line iterations. The default is 0 seconds.
ARGUMENTS
file The name of a file containing one or more frame specifications. When more than one file is
specified, efsu behaves like the cat utility by reading and sending each file in turn. The
program makes no assumptions based on filename or extension and enforces no filename conventions;
however, giving frame description files the *.hex extension is a good convention. Some toolkit
distributions include example .hex files in the source folder. These files are not needed for
proper execution and may be deleted.
NOTES
One way to create a frame description file is to cut-and-paste output from a packet sniffer program and
discard the line numbers and ASCII text columns. You can then break out selected frame segments onto new
lines and insert comments.
EXAMPLES
For example, a simple file might look like:
#!/usr/local/bin/efsu -ieth0
# file: abc.hex
# =====================================
# this is an example frame description;
# -------------------------------------
00 B0 52 00 00 01
// 00 B0 52 BE DE 73
00 E0 45 DA DA 07
88 E1
/* content */
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00000000 0000 00 /* control byte */ 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
The bang path permits direct execution of the file if 1) efsu is installed in the bang path directory, 2)
the description file has execute permissions and 3) the user has execute privileges for that file. The
script-style, C++-style and C-style comments are ignored along with any white space. Only the
hexadecimal octets are read and sent. Since the number of octets exceeds 60 and the number of digits is
even, efsu will report no errors and send the packet. There is no guarantee that this packet is valid.
Assuming the above file is named abc.hex, we can transmit the file over the network as an Ethernet frame
with the next command. A hexadecimal dump of the transmitted frame appears on the console because option
-v is present.
# efsu abc.hex -v
00000000 00 B0 52 00 00 01 00 E0 45 DA DA 07 88 E1 00 00 ..R.....E.......
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040 00 00 00 00 00 00 ......
Since every host interface has a different hardware address, one can replace the source address of
transmitted frames with the actual host interface address using option -h. Observe that the source
address above has been replaced with that of the local host interface used to transmit the frame.
# efsu abc.hex -vh
00000000 00 B0 52 00 00 01 00 0F EA 10 D5 1C 88 E1 00 00 ..R.............
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040 00 00 00 00 00 00 ......
You can also direct the frame to another device using option -d. Observe that the destination address
above has been replaced with the one specified on the command line.
# efsu abc.hex -vhd 00b052beef01
00000000 00 B0 52 BE EF 01 00 0F EA 10 D5 1C 88 E1 00 00 ..R.............
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040 00 00 00 00 00 00 ......
SEE ALSO
amp(1), hpav(1)
CREDITS
Charles Maier
open-plc-utils-0.0.3 November 2013 efsu(1)