NAME

       bgcode - compress/decompress byte streams using LZSS

SYNOPSIS

       bgcode [IN_FILE] OPTIONS

DESCRIPTION

       bgcode converts textual gcode files into binary gcode, as used by Prusa 3D printers.

OPTIONS

       --checksum=CHECKSUM
              Checksum  algorithm  to use.  Valid values for CHECKSUM are 0 for no checksum and 1 for CRC32 (de‐
              fault).

       --file_metadata_compression=COMPRESSION
              Compression algorithm to use for file metadata.  Valid values for COMPRESSION are: 0 for None (de‐
              fault), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

       --print_metadata_compression=COMPRESSION
              Compression algorithm to use for print metadata.  Valid values for COMPRESSION  are:  0  for  None
              (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

       --printer_metadata_compression=COMPRESSION
              Compression  algorithm  to use for printer metadata.  Valid values for COMPRESSION are: 0 for None
              (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

       --slicer_metadata_compression=COMPRESSION
              Compression algorithm to use for slicer metadata.  Valid values for COMPRESSION are:  0  for  None
              (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

       --gcode_compression=COMPRESSION
              Compression  algorithm to use for G-code.  Valid values for COMPRESSION are: 0 for None (default),
              1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

       --gcode_encoding=GCODE_ENCODING
              Encoding format to use for G-code.  Valid values for GCODE_ENCODING are 0 for  None  (default),  1
              for MeatPack, and 2 for MeatPackComments.

       --metadata_encoding=METADATA_ENCODING
              Encoding format to use for metadata.  The only available value for this is 0 for INI (default).

BUGS

       The upstream BTS can be found at https://github.com/prusa3d/libbgcode/issues.

AUTHOR

       Chow Loong Jin <hyperair@debian.org>
              Wrote this manpage for the Debian system.

COPYRIGHT

       Copyright © 2023 Chow Loong Jin

       This manual page was written for the Debian system (and may be used by others).

       Permission  is granted to copy, distribute and/or modify this document under the terms of the GNU General
       Public License, Version 2 or (at your option) any later version published by the  Free  Software  Founda‐
       tion.

       On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-
       licenses/GPL.

                                               “December 23 2023”                                      bgcode(1)