Ubuntu Manpage: grk_decompress - decompresses an image in the JPEG 2000 format to a different image format

Provided by: grokj2k-tools_10.0.5-1build4_amd64

NAME

       grk_decompress - decompresses an image in the JPEG 2000 format to a different image format

SYNOPSIS

       grk_dcompress [-i infile.j2k] [-o outfile.bmp]

DESCRIPTION

This program decompresses a JPEG 2000 image and stores it in another image format.

Supported input formats: JP2 and J2K\J2C Supported input image extensions are .jp2 and .j2k\.j2c

Supported output formats are JPEG, BMP, PNM, PGX, PNG, RAW and TIFF Valid output image extensions are
jpg, .jpeg, .bmp, .pgm, .pgx, .pnm, .ppm, .pam, .png, .raw, .rawl, .tif and .tiff

• For PNG the library must have libpng available.

• For TIF\\TIFF the library must have libtiff available.

• For JPG\\JPEG the library must have a libjpeg variant available.

Limitations

• Grok supports up to and including 16 bit sample precision for decompression. This is a subset of the
ISO standard, which allows up to 38 bit precision.

stdout

The decompresser can write output to stdout for the following formats: BMP,PNG, JPG, PNM, RAW and RAWL.
To enable writing to stdout, please ensure that the -o parameter is not present in the command line, and
that the -out_fmt parameter is set to one of the supported formats listed above. Note: the verbose flag
-v will be ignored in this mode, as verbose output would corrupt the output file.

Embedded ICC Profile

If there is an embedded ICC profile in the input file, then the profile will be stored in the output file
for TIF\TIFF, JPG, BMP and PNG formats. For other formats, the profile will be applied to the decom‐
pressed image before it is stored.

IPTC (JP2 only)

If a compressed input contains IPTC metadata, this metadata will be stored to the output file if that
output file is in TIF\TIFF format.

XMP (JP2 only)

If a compressed input contains XMP metadata, this metadata will be stored to the output file if that out‐
put file is in TIF\\TIFF or PNG format.

Exif (JP2 only)

To transfer Exif and all other meta-data tags, use the command line argument -V described below. To
transfer the tags, Grok uses the ExifTool (https://exiftool.org/) Perl module. ExifTool must be in‐
stalled for this command line argument to work properly. Note: transferring Exif tags may add a few hun‐
dred ms to the decompress time, depending on the system.

Important note on command line argument notation below: the outer square braces appear for clarity on‐
ly,and should not be included in the actual command line argument. Square braces appearing inside the
outer braces should be included.

Options
-h, -help

Print a help message and exit.

-version

Print library version and exit.

-v, -verbose

Output information and warnings about decoding to console (errors are always output). Console is silent
by default.

-i, -in_file [file]

Input file. Either this argument or the -img_dir argument described below is required. Valid input im‐
age extensions are J2K, JP2 and JPC. When using this option output file must be specified using -o.

-o, -out_file [file]

Output file. Required when using -i option. See above for supported file types. If a PGX filename is
given, there will be as many output files as there are components: an index starting from 0 will then be
appended to the output filename, just before the pgx extension. If a PGM filename is given and there is
more than one component, then only the first component will be written to the file.

-y, -img_dir [directory path]

Path to the folder where the compressed images are stored. Either this argument or the -i argument de‐
scribed above is required. When image files are in the same directory as the executable, this can be in‐
dicated by a dot . argument. When using this option, the output format must be specified using -out_fmt.
Output images are saved in the same folder.

-a, -out_dir [output directory]

Output directory where compressed files are stored. Only relevant when the -img_dir flag is set. De‐
fault: same directory as specified by -img_dir.

-O, -out_fmt [format]

Output format used to decompress the code streams. Required when -img_dir option is used. See above for
supported formats.

-r, -reduce [reduce factor]

Reduce factor. Set the number of highest resolution levels to be discarded. The image resolution is ef‐
fectively divided by 2 to the power of the number of discarded levels. The reduce factor is limited by
the smallest total number of decomposition levels among tiles.

-l, -layer [layer number]

Layer number. Set the maximum number of quality layers to decode. If there are fewer quality layers
than the specified number, all quality layers will be decoded.

-d, -region [x0,y0,x1,y1]

Decompress a region of the image. If (X,Y) is a location in the image, then it will only be decoded if
x0 <= X < x1 and y0 <= Y < y1. By default, the entire image is decoded.

There are two ways of specifying the decompress region:

1. pixel coordinates relative to image origin - region is specified in 32 bit integers.

Example: if image coordinates on canvas are (50,50,1050,1050) and region is specified as -d
100,100,200,200, then a region with canvas coordinates (150,150,250,250) is decompressed

2. pixel coordinates relative to image origin and scaled as floating point to unit square [0,0,1,1]

The above example would be specified as -d 0.1,0.1,0.2,0.2

Note: there is one ambiguous case, namely -d 0,0,1,1, which could be interpreted as either scaled or un-
scaled. We treat this case as a scaled pixel region.

-m, -random_access [random access flags]

Toggle support for random access code stream markers if present : PLT,TLM or PLM;

The random access flags value passed in is an or’d combination of the following flags

1 use PLT marker if present
2 use TLM marker if present
4 use PLM marker if present

example: -m 0 would disable all three markers.

-c, -compression [compression value]

Compress output image data. Currently, this flag is only applicable when output format is set to TIF.
Possible values are {NONE, LZW,JPEG, PACKBITS. ZIP,LZMA,ZSTD,WEBP}. Default value is NONE.

-L, -compression_level [compression level]

“Quality” of compression. Currently only implemented for PNG format. For PNG, compression level ranges
from 0 (no compression) up to 9. Grok default value is 3.

Note: PNG is always lossless, so using a different level will not affect the image quality. It only
changes the speed vs file size tradeoff.

-t, -tile_index [tile index]

Only decode tile with specified index. Index follows the JPEG2000 convention from top-left to bottom-
right. By default all tiles are decoded.

-p, -precision [component 0 precision[C|S],component 1 precision[C|S],...]

Force precision (bit depth) of components. There must be at least one value present, but there is no
limit on the number of values. The last values are ignored if too many values. If there are fewer val‐
ues than components, the last value is used for the remaining components. If C is specified (default),
values are clipped. If S is specified, values are scaled. Specifying a 0 value indicates use of the
original bit depth.

Example:

-p 8C,8C,8c

Clip all components of a 16 bit RGB image to 8 bits.

-f, -force_rgb

Force output image color space to RGB. For TIF/TIFF or PNG output formats, the ICC profile will be ap‐
plied in this case - default behaviour is to stored the profile in the output file, if supported.

-u, -upsample

Sub-sampled components will be upsampled to image size.

-s, -split_pnm

Split output components into different files when writing to PNM.

-X, -xml [output file name]

Store XML metadata to file, if it exists in compressed file. File name will be set to output file name +
".xml"

-V, -transfer_exif_tags

Transfer all Exif tags to output file. Note: ExifTool (https://exiftool.org/) must be installed for this
command line argument to work correctly.

-W, -logfile [output file name]

Log to file. File name will be set to output file name

-H, -num_threads [number of threads]

Number of threads used for T1 compression. Default is total number of logical cores.

-e, -repetitions [number of repetitions]

Number of repetitions, for either a single image, or a folder of images. Default is 1. 0 signifies un‐
limited repetitions.

FILES

ENVIRONMENT

BUGS

       See GitHub Issues: https://github.com/GrokImageCompression/grok/issues

AUTHOR

       Grok Image Compression Inc.