Provided by: charliecloud-builders_0.37-1build1_amd64 
NAME
ch-image - Build and manage images; completely unprivileged
SYNOPSIS
$ ch-image [...] build [-t TAG] [-f DOCKERFILE] [...] CONTEXT
$ ch-image [...] build-cache [...]
$ ch-image [...] delete IMAGE_GLOB [IMAGE_GLOB ...]
$ ch-image [...] gestalt [SELECTOR]
$ ch-image [...] import PATH IMAGE_REF
$ ch-image [...] list [-l] [IMAGE_REF]
$ ch-image [...] pull [...] IMAGE_REF [DEST_REF]
$ ch-image [...] push [--image DIR] IMAGE_REF [DEST_REF]
$ ch-image [...] reset
$ ch-image [...] undelete IMAGE_REF
$ ch-image { --help | --version | --dependencies }
DESCRIPTION
ch-image is a tool for building and manipulating container images, but not running them (for that you
want ch-run). It is completely unprivileged, with no setuid/setgid/setcap helpers. Many operations can
use caching for speed. The action to take is specified by a sub-command.
Options that print brief information and then exit:
-h, --help
Print help and exit successfully. If specified before the sub-command, print general help and
list of sub-commands; if after the sub-command, print help specific to that sub-command.
--dependencies
Report dependency problems on standard output, if any, and exit. If all is well, there is no
output and the exit is successful; in case of problems, the exit is unsuccessful.
--version
Print version number and exit successfully.
Common options placed before or after the sub-command:
-a, --arch ARCH
Use ARCH for architecture-aware registry operations. (See section “Architecture” below for
details.)
--always-download
Download all files when pulling, even if they are already in builder storage. Note that
ch-image pull will always retrieve the most up-to-date image; this option is mostly for
debugging.
--auth Authenticate with the remote repository, then (if successful) make all subsequent requests in
authenticated mode. For most subcommands, the default is to never authenticate, i.e., make all
requests anonymously. The exception is push, which implies --auth.
--break MODULE:LINE
Set a PDB breakpoint at line number LINE of module named MODULE (typically the filename with
.py removed, or __main__ for ch-image itself). That is, a PDB debugger shell will open before
executing the specified line.
This is accomplished by re-parsing the module, injecting import pdb; pdb.set_trace() into the
parse tree, re-compiling the tree, and replacing the module’s code with the result. This has
various gotchas, including (1) module-level code in the target module is executed twice,
(2) the option is parsed with bespoke early code so command line argument parsing itself can be
debugged, (3) breakpoints on function definition will trigger while the module is being
re-executed, not when the function is called (break on the first line of the function body
instead), and (4) other weirdness we haven’t yet characterized.
--cache
Enable build cache. Default if a sufficiently new Git is available. See section Build cache for
details.
--cache-large SIZE
Set the cache’s large file threshold to SIZE MiB, or 0 for no large files, which is the
default. Values greater than zero can speed up many builds but can also cause performance
degradation. Experimental. See section Large file threshold for details.
--debug
Add a stack trace to fatal error hints. This can also be done by setting the environment
variable CH_IMAGE_DEBUG.
--no-cache
Disable build cache. Default if a sufficiently new Git is not available. This option turns off
the cache completely; if you want to re-execute a Dockerfile and store the new results in
cache, use --rebuild instead.
--no-lock
Disable storage directory locking. This lets you run as many concurrent ch-image instances as
you want against the same storage directory, which risks corruption but may be OK for some
workloads.
--no-xattrs
Enforce default handling of xattrs, i.e. do not save them in the build cache or restore them on
rebuild. This is the default, but the option is provided to override the $CH_XATTRS environment
variable.
--password-many
Re-prompt the user every time a registry password is needed.
--profile
Dump profile to files /tmp/chofile.p (cProfile dump format) and /tmp/chofile.txt (text
summary). You can convert the former to a PDF call graph with gprof2dot -f pstats
/tmp/chofile.p | dot -Tpdf -o /tmp/chofile.pdf. This excludes time spend in subprocesses.
Profile data should still be written on fatal errors, but not if the program crashes.
-q, --quiet
Be quieter; can be repeated. Incompatible with -v and suppresses --debug regardless of option
order. See the FAQ entry on verbosity for details.
--rebuild
Execute all instructions, even if they are build cache hits, except for FROM which is retrieved
from cache on hit.
-s, --storage DIR
Set the storage directory (see below for important details).
--tls-no-verify
Don’t verify TLS certificates of the repository. (Do not use this option unless you understand
the risks.)
-v, --verbose
Print extra chatter; can be repeated. See the FAQ entry on verbosity for details.
--xattrs
Save xattrs and ACLs in the build cache, and restore them when rebuilding from the cache.
ARCHITECTURE
Charliecloud provides the option --arch ARCH to specify the architecture for architecture-aware registry
operations. The argument ARCH can be: (1) yolo, to bypass architecture-aware code and use the registry’s
default architecture; (2) host, to use the host’s architecture, obtained with the equivalent of uname -m
(default if --arch not specified); or (3) an architecture name. If the specified architecture is not
available, the error message will list which ones are.
Notes:
1. ch-image is limited to one image per image reference in builder storage at a time, regardless of
architecture. For example, if you say ch-image pull --arch=foo baz and then ch-image pull --arch=bar
baz, builder storage will contain one image called “baz”, with architecture “bar”.
2. Images’ default architecture is usually amd64, so this is usually what you get with --arch=yolo.
Similarly, if a registry image is architecture-unaware, it will still be pulled with --arch=amd64 and
--arch=host on x86-64 hosts (other host architectures must specify --arch=yolo to pull
architecture-unaware images).
3. uname -m and image registries often use different names for the same architecture. For example, what
uname -m reports as “x86_64” is known to registries as “amd64”. --arch=host should translate if
needed, but it’s useful to know this is happening. Directly specified architecture names are passed
to the registry without translation.
4. Registries treat architecture as a pair of items, architecture and sometimes variant (e.g., “arm” and
“v7”). Charliecloud treats architecture as a simple string and converts to/from the registry view
transparently.
AUTHENTICATION
Charliecloud does not have configuration files; thus, it has no separate login subcommand to store
secrets. Instead, Charliecloud will prompt for a username and password when authentication is needed.
Note that some repositories refer to the secret as something other than a “password”; e.g., GitLab calls
it a “personal access token (PAT)”, Quay calls it an “application token”, and nVidia NGC calls it an “API
token”.
For non-interactive authentication, you can use environment variables CH_IMAGE_USERNAME and
CH_IMAGE_PASSWORD. Only do this if you fully understand the implications for your specific use case,
because it is difficult to securely store secrets in environment variables.
By default for most subcommands, all registry access is anonymous. To instead use authenticated access
for everything, specify --auth or set the environment variable $CH_IMAGE_AUTH=yes. The exception is push,
which always runs in authenticated mode. Even for pulling public images, it can be useful to authenticate
for registries that have per-user rate limits, such as Docker Hub. (Older versions of Charliecloud
started with anonymous access, then tried to upgrade to authenticated if it seemed necessary. However,
this turned out to be brittle; see issue #1318.)
The username and password are remembered for the life of the process and silently re-offered to the
registry if needed. One case when this happens is on push to a private registry: many registries will
first offer a read-only token when ch-image checks if something exists, then re-authenticate when
upgrading the token to read-write for upload. If your site uses one-time passwords such as provided by a
security device, you can specify --password-many to provide a new secret each time.
These values are not saved persistently, e.g. in a file. Note that we do use normal Python variables for
this information, without pinning them into physical RAM with mlock(2) or any other special treatment, so
we cannot guarantee they will never reach non-volatile storage.
Technical details
Most registries use something called Bearer authentication, where the client (e.g.,
Charliecloud) includes a token in the headers of every HTTP request.
The authorization dance is different from the typical UNIX approach, where there is a separate
login sequence before any content requests are made. The client starts by simply making the
HTTP request it wants (e.g., to GET an image manifest), and if the registry doesn’t like the
client’s token (or if there is no token because the client doesn’t have one yet), it replies
with HTTP 401 Unauthorized, but crucially it also provides instructions in the response header
on how to get a token. The client then follows those instructions, obtains a token, re-tries
the request, and (hopefully) all is well. This approach also allows a client to upgrade a token
if needed, e.g. when transitioning from asking if a layer exists to uploading its content.
The distinction between Charliecloud’s anonymous mode and authenticated modes is that it will
only ask for anonymous tokens in anonymous mode and authenticated tokens in authenticated mode.
That is, anonymous mode does involve an authentication procedure to obtain a token, but this
“authentication” is done anonymously. (Yes, it’s confusing.)
Registries also often reply HTTP 401 when an image does not exist, rather than the seemingly
more correct HTTP 404 Not Found. This is to avoid information leakage about the existence of
images the client is not allowed to pull, and it’s why Charliecloud never says an image simply
does not exist.
STORAGE DIRECTORY
ch-image maintains state using normal files and directories located in its storage directory; contents
include various caches and temporary images used for building.
In descending order of priority, this directory is located at:
-s, --storage DIR
Command line option.
$CH_IMAGE_STORAGE
Environment variable. The path must be absolute, because the variable is likely set in a very
different context than when it’s used, which seems error-prone on what a relative path is
relative to.
/var/tmp/$USER.ch
Default. (Previously, the default was /var/tmp/$USER/ch-image. If a valid storage directory is
found at the old default path, ch-image tries to move it to the new default path.)
Unlike many container implementations, there is no notion of storage drivers, graph drivers, etc., to
select and/or configure.
The storage directory can reside on any single filesystem (i.e., it cannot be split across multiple
filesystems). However, it contains lots of small files and metadata traffic can be intense. For example,
the Charliecloud test suite uses approximately 400,000 files and directories in the storage directory as
of this writing. Place it on a filesystem appropriate for this; tmpfs’es such as /var/tmp are a good
choice if you have enough RAM (/tmp is not recommended because ch-run bind-mounts it into containers by
default).
While you can currently poke around in the storage directory and find unpacked images runnable with
ch-run, this is not a supported use case. The supported workflow uses ch-convert to obtain a packed
image; see the tutorial for details.
The storage directory format changes on no particular schedule. ch-image is normally able to upgrade
directories produced by a given Charliecloud version up to one year after that version’s release.
Upgrades outside this window and downgrades are not supported. In these cases, ch-image will refuse to
run until you delete and re-initialize the storage directory with ch-image reset.
WARNING:
Network filesystems, especially Lustre, are typically bad choices for the storage directory. This is a
site-specific question and your local support will likely have strong opinions.
BUILD CACHE
Overview
Subcommands that create images, such as build and pull, can use a build cache to speed repeated
operations. That is, an image is created by starting from the empty image and executing a sequence of
instructions, largely Dockerfile instructions but also some others like “pull” and “import”. Some
instructions are expensive to execute (e.g., RUN wget http://slow.example.com/bigfile or transferring
data billed by the byte), so it’s often cheaper to retrieve their results from cache instead.
The build cache uses a relatively new Git under the hood; see the installation instructions for version
requirements. Charliecloud implements workarounds for Git’s various storage limitations, so things like
file metadata and Git repositories within the image should work. Important exception: No files named
.git* or other Git metadata are permitted in the image’s root directory.
Extended attributes (xattrs) are ignored by the build cache by default. Cache support for xattrs
belonging to unprivileged xattr namespaces (e.g. user) can be enabled by specifying the --xattrs option
or by setting the CH_XATTRS environment variable. If CH_XATTRS is set, you override it with --no-xattrs.
Note that extended attributes in privileged xattr namespaces (e.g. :code:‘trusted‘) cannot be read by
:code:‘ch-image‘ and will always be lost without warning.
The cache has three modes: enabled, disabled, and a hybrid mode called rebuild where the cache is fully
enabled for FROM instructions, but all other operations re-execute and re-cache their results. The
purpose of rebuild is to do a clean rebuild of a Dockerfile atop a known-good base image.
Enabled mode is selected with --cache or setting $CH_IMAGE_CACHE to enabled, disabled mode with
--no-cache or disabled, and rebuild mode with --rebuild or rebuild. The default mode is enabled if an
appropriate Git is installed, otherwise disabled.
Compared to other implementations
NOTE:
This section is a lightly edited excerpt from our paper “Charliecloud’s layer-free, Git-based
container build cache”.
Existing tools such as Docker and Podman implement their build cache with a layered (union) filesystem
such as OverlayFS or FUSE-OverlayFS and tar archives to represent the content of each layer; this
approach is standardized by OCI. The layered cache works, but it has drawbacks in three critical areas:
1. Diff format. The tar format is poorly standardized and not designed for diffs. Notably, tar cannot
represent file deletion. The workaround used for OCI layers is specially named whiteout files, which
means the tar archives cannot be unpacked by standard UNIX tools and require special
container-specific processing.
2. Cache overhead. Each time a Dockerfile instruction is started, a new overlay filesystem is mounted
atop the existing layer stack. File metadata operations in the instruction then start at the top layer
and descend the stack until the layer containing the desired file is reached. The cost of these
operations is therefore proportional to the number of layers, i.e., the number of instructions between
the empty root image and the instruction being executed. This results in a best practice of large,
complex instructions to minimize their number, which can conflict with simpler, more numerous
instructions the user might prefer.
3. De-duplication. Identical files on layers with an ancestry relationship (i.e., instruction A precedes
B in a build) are stored only once. However, identical files on layers without this relationship are
stored multiple times. For example, if instructions B and B’ both follow A — perhaps because B was
modified and the image rebuilt — then any files created by both B and B’ will be stored twice.
Also, similar files are never de-duplicated, regardless of ancestry. For example, if instruction A
creates a file and subsequently instruction B modifies a single bit in that file, both versions are
stored in their entirety.
Our Git-based cache addresses the three drawbacks: (1) Git is purpose-built to store changing directory
trees, (2) cache overhead is imposed only at instruction commit time, and (3) Git de-duplicates both
identical and similar files. Also, it is based on an extremely widely used tool that enjoys development
support from well-resourced actors, in particular on scaling (e.g., Microsoft’s large-repository
accelerator Scalar was recently merged into Git).
In addition to these structural advantages, performance experiments reported in our paper above show that
the Git-based approach is as good as (and sometimes better than) overlay-based caches. On build time, the
two approaches are broadly similar, with one or the other being faster depending on context. Both had
performance problems on NFS. Notably, however, the Git-based cache was much faster for a 129-instruction
Dockerfile. On disk usage, the winner depended on the condition. For example, we saw the layered cache
storing large sibling layers redundantly; on the other hand, the Git-based cache has some obvious
redundancies as well, and one must compact it for full de-duplication benefit. However, Git’s
de-duplication was quite effective in some conditions and we suspect will prove even better in more
realistic scenarios.
That is, we believe our results show that the Git-based build cache is highly competitive with the
layered approach, with no obvious inferiority so far and hints that it may be superior on important
dimensions. We have ongoing work to explore these questions in more detail.
De-duplication and garbage collection
Charliecloud’s build cache takes advantage of Git’s file de-duplication features. This operates across
the entire build cache, i.e., files are de-duplicated no matter where in the cache they are found or the
relationship between their container images. Files are de-duplicated at different times depending on
whether they are identical or merely similar.
Identical files are de-duplicated at git add time; in ch-image build terms, that’s upon committing a
successful instruction. That is, it’s impossible to store two files with the same content in the build
cache. If you try — say with RUN yum install -y foo in one Dockerfile and RUN yum install -y foo bar in
another, which are different instructions but both install RPM foo’s files — the content is stored once
and each copy gets its own metadata and a pointer to the content, much like filesystem hard links.
Similar files, however, are only de-duplicated during Git’s garbage collection process. When files are
initially added to a Git repository (with git add), they are stored inside the repository as (possibly
compressed) individual files, called objects in Git jargon. Upon garbage collection, which happens both
automatically when certain parameters are met and explicitly with git gc, these files are archived and
(re-)compressed together into a single file called a packfile. Also, existing packfiles may be re-written
into the new one.
During this process, similar files are identified, and each set of similar files is stored as one base
file plus diffs to recover the others. (Similarity detection seems to be based primarily on file size.)
This delta process is agnostic to alignment, which is an advantage over alignment-sensitive block-level
de-duplicating filesystems. Exception: “Large” files are not compressed or de-duplicated. We use the Git
default threshold of 512 MiB (as of this writing).
Charliecloud runs Git garbage collection at two different times. First, a lighter-weight garbage pass
runs automatically when the number of loose files (objects) grows beyond a limit. This limit is in flux
as we learn more about build cache performance, but it’s quite a bit higher than the Git default. This
garbage runs in the background and can continue after the build completes; you may see Git processes
using a lot of CPU.
An important limitation of the automatic garbage is that large packfiles (again, this is in flux, but
it’s several GiB) will not be re-packed, limiting the scope of similar file detection. To address this, a
heavier garbage collection can be run manually with ch-image build-cache --gc. This will re-pack (and
re-write) the entire build cache, de-duplicating all similar files. In both cases, garbage uses all
available cores.
git build-cache prints the specific garbage collection parameters in use, and -v can be added for more
detail.
Large file threshold
Because Git uses content-addressed storage, upon commit, it must read in full all files modified by an
instruction. This I/O cost can be a significant fraction of build time for some images. To mitigate this,
regular files larger than the experimental large file threshold are stored outside the Git repository,
somewhat like Git Large File Storage.
ch-image copies large files in and out of images at each instruction commit. It tries to do this with a
fast metadata-only copy-on-write operation called “reflink”, but that is only supported with the right
Python version, Linux kernel version, and filesystem. If unsupported, Charliecloud falls back to an
expensive standard copy, which is likely slower than letting Git deal with the files. See File copy
performance for details.
Every version of a large file is stored verbatim and uncompressed (e.g., a large file with a one-byte
change will be stored in full twice), so Git’s de-duplication does not apply. However, on filesystems
with reflink support, files can share extents (e.g., each of the two files will have its own extent
containing the changed byte, but the rest of the extents will remain shared). This provides
de-duplication between large files images that share ancestry. Also, unused large files are deleted by
ch-image build-cache --gc.
A final caveat: Large files in any image with the same path, mode, size, and mtime (to nanosecond
precision if possible) are considered identical, even if their content is not actually identical (e.g.,
touch(1) shenanigans can corrupt an image).
Option --cache-large sets the threshold in MiB; if not set, environment variable CH_IMAGE_CACHE_LARGE is
used; if that is not set either, the default value 0 indicates that no files are considered large.
(Note that Git has an unrelated setting called core.bigFileThreshold.)
Example
Suppose we have this Dockerfile:
$ cat a.df
FROM alpine:3.17
RUN echo foo
RUN echo bar
On our first build, we get:
$ ch-image build -t foo -f a.df .
1. FROM alpine:3.17
[ ... pull chatter omitted ... ]
2. RUN echo foo
copying image ...
foo
3. RUN echo bar
bar
grown in 3 instructions: foo
Note the dot after each instruction’s line number. This means that the instruction was executed. You can
also see this by the output of the two echo commands.
But on our second build, we get:
$ ch-image build -t foo -f a.df .
1* FROM alpine:3.17
2* RUN echo foo
3* RUN echo bar
copying image ...
grown in 3 instructions: foo
Here, instead of being executed, each instruction’s results were retrieved from cache. (Charliecloud uses
lazy retrieval; nothing is actually retrieved until the end, as seen by the “copying image” message.)
Cache hit for each instruction is indicated by an asterisk (*) after the line number. Even for such a
small and short Dockerfile, this build is noticeably faster than the first.
We can also try a second, slightly different Dockerfile. Note that the first three instructions are the
same, but the third is different:
$ cat c.df
FROM alpine:3.17
RUN echo foo
RUN echo qux
$ ch-image build -t c -f c.df .
1* FROM alpine:3.17
2* RUN echo foo
3. RUN echo qux
copying image ...
qux
grown in 3 instructions: c
Here, the first two instructions are hits from the first Dockerfile, but the third is a miss, so
Charliecloud retrieves that state and continues building.
We can also inspect the cache:
$ ch-image build-cache --tree
* (c) RUN echo qux
| * (a) RUN echo bar
|/
* RUN echo foo
* (alpine+3.9) PULL alpine:3.17
* (root) ROOT
named images: 4
state IDs: 5
commits: 5
files: 317
disk used: 3 MiB
Here there are four named images: a and c that we built, the base image alpine:3.17 (written as
alpine+3.9 because colon is not allowed in Git branch names), and the empty base of everything root. Also
note how a and c diverge after the last common instruction RUN echo foo.
BUILD
Build an image from a Dockerfile and put it in the storage directory.
Synopsis
$ ch-image [...] build [-t TAG] [-f DOCKERFILE] [...] CONTEXT
Description
See below for differences with other Dockerfile interpreters. Charliecloud supports an extended
instruction (RSYNC), a few other instructions behave slightly differently, and a few are ignored.
Note that FROM implicitly pulls the base image if needed, so you may want to read about the pull
subcommand below as well.
Required argument:
CONTEXT
Path to context directory. This is the root of COPY instructions in the Dockerfile. If a single
hyphen (-) is specified: (a) read the Dockerfile from standard input, (b) specifying --file is
an error, and (c) there is no context, so COPY will fail. (See --file for how to provide the
Dockerfile on standard input while also having a context.)
Options:
-b, --bind SRC[:DST]
For RUN instructions only, bind-mount SRC at guest DST. The default destination if not
specified is to use the same path as the host; i.e., the default is equivalent to
--bind=SRC:SRC. If DST does not exist, try to create it as an empty directory, though images do
have ten directories /mnt/[0-9] already available as mount points. Can be repeated.
Note: See documentation for ch-run --bind for important caveats and gotchas.
Note: Other instructions that modify the image filesystem, e.g. COPY, can only access host
files from the context directory, regardless of this option.
--build-arg KEY[=VALUE]
Set build-time variable KEY defined by ARG instruction to VALUE. If VALUE not specified, use
the value of environment variable KEY.
-f, --file DOCKERFILE
Use DOCKERFILE instead of CONTEXT/Dockerfile. If a single hyphen (-) is specified, read the
Dockerfile from standard input; like docker build, the context directory is still available in
this case.
--force[=MODE]
Use unprivileged build with root emulation mode MODE, which can be fakeroot, seccomp (the
default), or none. See section “Privilege model” below for details on what this does and when
you might need it.
--force-cmd=CMD,ARG1[,ARG2...]
If command CMD is found in a RUN instruction, add the comma-separated ARGs to it. For example,
--force-cmd=foo,-a,--bar=baz would transform RUN foo -c into RUN foo -a --bar=baz -c. This is
intended to suppress validation that defeats --force=seccomp and implies that option. Can be
repeated. If specified, replaces (does not extend) the default suppression options. Literal
commas can be escaped with backslash; importantly however, backslash will need to be protected
from the shell also. Section “Privilege model” below explains why you might need this.
-n, --dry-run
Don’t actually execute any Dockerfile instructions.
--parse-only
Stop after parsing the Dockerfile.
-t, --tag TAG
Name of image to create. If not specified, infer the name:
1. If Dockerfile named Dockerfile with an extension: use the extension with invalid characters
stripped, e.g. Dockerfile.@FOO.bar → foo.bar.
2. If Dockerfile has extension df or dockerfile: use the basename with the same transformation,
e.g. baz.@QUX.dockerfile -> baz.qux.
3. If context directory is not /: use its name, i.e. the last component of the absolute path to
the context directory, with the same transformation,
4. Otherwise (context directory is /): use root.
If no colon present in the name, append :latest.
Uses ch-run -w -u0 -g0 --no-passwd --unsafe to execute RUN instructions.
Privilege model
Overview
ch-image is a fully unprivileged image builder. It does not use any setuid or setcap helper programs, and
it does not use configuration files /etc/subuid or /etc/subgid. This contrasts with the “rootless” or “‐
fakeroot” modes of some competing builders, which do require privileged supporting code or utilities.
Without root emulation, this approach does confuse programs that expect to have real root privileges,
most notably distribution package installers. This subsection describes why that happens and what you can
do about it.
ch-image executes all instructions as the normal user who invokes it. For RUN, this is accomplished with
ch-run arguments including -w --uid=0 --gid=0. That is, your host EUID and EGID are both mapped to zero
inside the container, and only one UID (zero) and GID (zero) are available inside the container. Under
this arrangement, processes running in the container for each RUN appear to be running as root, but many
privileged system calls will fail without the root emulation methods described below. This affects any
fully unprivileged container build, not just Charliecloud.
The most common time to see this is installing packages. For example, here is RPM failing to chown(2) a
file, which makes the package update fail:
Updating : 1:dbus-1.10.24-13.el7_6.x86_64 2/4
Error unpacking rpm package 1:dbus-1.10.24-13.el7_6.x86_64
error: unpacking of archive failed on file /usr/libexec/dbus-1/dbus-daemon-launch-helper;5cffd726: cpio: chown
Cleanup : 1:dbus-libs-1.10.24-12.el7.x86_64 3/4
error: dbus-1:1.10.24-13.el7_6.x86_64: install failed
This one is (ironically) apt-get failing to drop privileges:
E: setgroups 65534 failed - setgroups (1: Operation not permitted)
E: setegid 65534 failed - setegid (22: Invalid argument)
E: seteuid 100 failed - seteuid (22: Invalid argument)
E: setgroups 0 failed - setgroups (1: Operation not permitted)
Charliecloud provides two different mechanisms to avoid these problems. Both involve lying to the
containerized process about privileged system calls, but at very different levels of complexity.
Root emulation mode fakeroot
This mode uses fakeroot(1) to maintain an elaborate web of deceit that is internally consistent. This
program intercepts both privileged system calls (e.g., setuid(2)) as well as other system calls whose
return values depend on those calls (e.g., getuid(2)), faking success for privileged system calls
(perhaps making no system call at all) and altering return values to be consistent with earlier fake
success. Charliecloud automatically installs the fakeroot(1) program inside the container and then wraps
RUN instructions having known privilege needs with it. Thus, this mode is only available for certain
distributions.
The advantage of this mode is its consistency; e.g., careful programs that check the new UID after
attempting to change it will not notice anything amiss. Its disadvantage is complexity: detailed
knowledge and procedures for multiple Linux distributions.
This mode has three basic steps:
1. After FROM, analyze the image to see what distribution it contains, which determines the specific
workarounds.
2. Before the user command in the first RUN instruction where the injection seems needed, install
fakeroot(1) in the image, if one is not already installed, as well as any other necessary
initialization commands. For example, we turn off the apt sandbox (for Debian Buster) and configure
EPEL but leave it disabled (for CentOS/RHEL).
3. Prepend fakeroot to RUN instructions that seem to need it, e.g. ones that contain apt, apt-get,
dpkg for Debian derivatives and dnf, rpm, or yum for RPM-based distributions.
RUN instructions that do not seem to need modification are unaffected by this mode.
The details are specific to each distribution. ch-image analyzes image content (e.g., grepping
/etc/debian_version) to select a configuration; see lib/force.py for details. ch-image prints exactly
what it is doing.
WARNING:
Because of fakeroot mode’s complexity, we plan to remove it if seccomp mode performs well enough. If
you have a situation where fakeroot mode works and seccomp does not, please let us know.
Root emulation mode seccomp (default)
This mode uses the kernel’s seccomp(2) system call filtering to intercept certain privileged system
calls, do absolutely nothing, and return success to the program.
Some system calls are quashed regardless of their arguments: capset(2); chown(2) and friends;
kexec_load(2) (used to validate the filter itself); ; and setuid(2), setgid(2), and setgroups(2) along
with the other system calls that change user or group. mknod(2) and mknodat(2) are quashed if they try to
create a device file (e.g., creating FIFOs works normally).
The advantages of this approach is that it’s much simpler, it’s faster, it’s completely agnostic to libc,
and it’s mostly agnostic to distribution. The disadvantage is that it’s a very lazy liar; even the most
cursory consistency checks will fail, e.g., getuid(2) after setuid(2).
While this mode does not provide consistency, it does offer a hook to help prevent programs asking for
consistency. For example, apt-get -o APT::Sandbox::User=root will prevent apt-get from attempting to drop
privileges, which it verifies, exiting with failure if the correct IDs are not found (which they won’t be
under this approach). This can be expressed with --force-cmd=apt-get,-o,APT::Sandbox::User=root, though
this particular case is built-in and does not need to be specified. The full default configuration, which
is applied regardless of the image distribution, can be examined in the source file force.py. If any
--force-cmd are specified, this replaces (rather than extends) the default configuration.
Note that because the substitutions are a simple regex with no knowledge of shell syntax, they can cause
unwanted modifications. For example, RUN apt-get install -y apt-get will be run as /bin/sh -c "apt-get -o
APT::Sandbox::User=root install -y apt-get -o APT::Sandbox::User=root". One workaround is to add escape
syntax transparent to the shell; e.g., RUN apt-get install -y apt-get.
This mode executes all RUN instructions with the seccomp(2) filter and has no knowledge of which
instructions actually used the intercepted system calls. Therefore, the printed “instructions modified”
number is only a count of instructions with a hook applied as described above.
RUN logging
In terminal output, image metadata, and the build cache, the RUN instruction is always logged as RUN.S,
RUN.F, or RUN.N. The letter appended to the instruction reflects the root emulation mode used during the
build in which the instruction was executed. RUN.S indicates seccomp, RUN.F indicates fakeroot, and RUN.N
indicates that neither form of root emulation was used (--force=none).
Compatibility and behavior differences
ch-image is an independent implementation and shares no code with other Dockerfile interpreters. It uses
a formal Dockerfile parsing grammar developed from the Dockerfile reference documentation and
miscellaneous other sources, which you can examine in the source code.
We believe this independence is valuable for several reasons. First, it helps the community examine
Dockerfile syntax and semantics critically, think rigorously about what is really needed, and build a
more robust standard. Second, it yields disjoint sets of bugs (note that Podman, Buildah, and Docker all
share the same Dockerfile parser). Third, because it is a much smaller code base, it illustrates how
Dockerfiles work more clearly. Finally, it allows straightforward extensions if needed to support
scientific computing.
ch-image tries hard to be compatible with Docker and other interpreters, though as an independent
implementation, it is not bug-compatible.
The following subsections describe differences from the Dockerfile reference that we expect to be
approximately permanent. For not-yet-implemented features and bugs in this area, see related issues on
GitHub.
None of these are set in stone. We are very interested in feedback on our assessments and open questions.
This helps us prioritize new features and revise our thinking about what is needed for HPC containers.
Context directory
The context directory is bind-mounted into the build, rather than copied like Docker. Thus, the size of
the context is immaterial, and the build reads directly from storage like any other local process would
(i.e., it is reasonable use / for the context). However, you still can’t access anything outside the
context directory.
Variable substitution
Variable substitution happens for all instructions, not just the ones listed in the Dockerfile reference.
ARG and ENV cause cache misses upon definition, in contrast with Docker where these variables miss upon
use, except for certain cache-excluded variables that never cause misses, listed below.
Note that ARG and ENV have different syntax despite very similar semantics.
ch-image passes the following proxy environment variables in to the build. Changes to these variables do
not cause a cache miss. They do not require an ARG instruction, as documented in the Dockerfile
reference. Unlike Docker, they are available if the same-named environment variable is defined;
--build-arg is not required.
HTTP_PROXY
http_proxy
HTTPS_PROXY
https_proxy
FTP_PROXY
ftp_proxy
NO_PROXY
no_proxy
In addition to those listed in the Dockerfile reference, these environment variables are passed through
in the same way:
SSH_AUTH_SOCK
USER
Finally, these variables are also pre-defined but are unrelated to the host environment:
PATH=/ch/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
TAR_OPTIONS=--no-same-owner
ARG
Variables set with ARG are available anywhere in the Dockerfile, unlike Docker, where they only work in
FROM instructions, and possibly in other ARG before the first FROM.
FROM
The FROM instruction accepts option --arg=NAME=VALUE, which serves the same purpose as the ARG
instruction. It can be repeated.
LABEL
The LABEL instruction accepts key=value pairs to add metadata for an image. Unlike Docker, multiline
values are not supported; see issue #1512. Can be repeated.
COPY
NOTE:
The behavior described here matches Docker’s now-deprecated legacy builder. Docker’s new builder,
BuildKit, has different behavior in some cases, which we have not characterized.
Especially for people used to UNIX cp(1), the semantics of the Dockerfile COPY instruction can be
confusing.
Most notably, when a source of the copy is a directory, the contents of that directory, not the directory
itself, are copied. This is documented, but it’s a real gotcha because that’s not what cp(1) does, and it
means that many things you can do in one cp(1) command require multiple COPY instructions.
Also, the reference documentation is incomplete. In our experience, Docker also behaves as follows;
ch-image does the same in an attempt to be bug-compatible.
1. You can use absolute paths in the source; the root is the context directory.
2. Destination directories are created if they don’t exist in the following situations:
1. If the destination path ends in slash. (Documented.)
2. If the number of sources is greater than 1, either by wildcard or explicitly, regardless of whether
the destination ends in slash. (Not documented.)
3. If there is a single source and it is a directory. (Not documented.)
3. Symbolic links behave differently depending on how deep in the copied tree they are. (Not documented.)
1. Symlinks at the top level — i.e., named as the destination or the source, either explicitly or by
wildcards — are dereferenced. They are followed, and whatever they point to is used as the
destination or source, respectively.
2. Symlinks at deeper levels are not dereferenced, i.e., the symlink itself is copied.
4. If a directory appears at the same path in source and destination, and is at the 2nd level or deeper,
the source directory’s metadata (e.g., permissions) are copied to the destination directory. (Not
documented.)
5. If an object (a) appears in both the source and destination, (b) is at the 2nd level or deeper, and
(c) is different file types in source and destination, the source object will overwrite the
destination object. (Not documented.)
We expect the following differences to be permanent:
• Wildcards use Python glob semantics, not the Go semantics.
• COPY --chown is ignored, because it doesn’t make sense in an unprivileged build.
Features we do not plan to support
• Parser directives are not supported. We have not identified a need for any of them.
• EXPOSE: Charliecloud does not use the network namespace, so containerized processes can simply listen
on a host port like other unprivileged processes.
• HEALTHCHECK: This instruction’s main use case is monitoring server processes rather than applications.
Also, it requires a container supervisor daemon, which we have no plans to add.
• MAINTAINER is deprecated.
• STOPSIGNAL requires a container supervisor daemon process, which we have no plans to add.
• USER does not make sense for unprivileged builds.
• VOLUME: Charliecloud has good support for bind mounts; we anticipate that it will continue to focus on
that and will not introduce the volume management features that Docker has.
RSYNC (Dockerfile extension)
WARNING:
This instruction is experimental and may change or be removed.
Overview
Copying files is often simple but has numerous difficult corner cases, e.g. when dealing with symbolic
or hard links. The standard instruction COPY deals with many of these corner cases differently from other
UNIX utilities, lacks complete documentation, and behaves inconsistently between different Dockerfile
interpreters (e.g., Docker’s legacy builder vs. BuildKit), as detailed above. On the other hand,
rsync(1) is an extremely capable, widely used file copy tool, with detailed options to specify behavior
and 25 years of history dealing with weirdness.
RSYNC (also spelled NSYNC) is a Charliecloud extension that gives copying behavior identical to rsync(1).
In fact, Charliecloud’s current implementation literally calls the host’s rsync(1) to do the copy, though
this may change in the future. There is no list form of RSYNC.
The two key usage challenges are trailing slashes on paths and symlink handling. In particular, the
default symlink handling seemed reasonable to us, but you may want something different. See the arguments
and examples below. Importantly, COPY is not any less fraught, and you have no choice about what to do
with symlinks.
Arguments
RSYNC takes the same arguments as rsync(1), so refer to its man page for a detailed explanation of all
the options (with possible emphasis on its symlink options). Sources are relative to the context
directory even if they look absolute with a leading slash. Any globbed sources are processed by
ch-image(1) using Python rules, i.e., rsync(1) sees the expanded sources with no wildcards. Relative
destinations are relative to the image’s current working directory, while absolute destinations refer to
the image’s root.
For arguments that read input from a file (e.g. --exclude-from or --files-from), relative paths are
relative to the context directory, absolute paths refer to the image root, and - (standard input) is an
error.
For example,
WORKDIR /foo
RSYNC --foo src1 src2 dst
is translated to (the equivalent of):
$ mkdir -p /foo
$ rsync -@=-1 -AHSXpr --info=progress2 -l --safe-links \
--foo /context/src1 /context/src2 /storage/imgroot/foo/dst2
Note the extensive default arguments to rsync(1). RSYNC takes a single instruction option beginning with
+ (plus) that is shorthand for a group of rsync(1) options. This single option is one of:
+m Preserves metadata and directory structure. Symlinks are skipped with a warning. Equivalent to
all of:
• -@=-1: use nanosecond precision when comparing timestamps.
• -A: preserve ACLs.
• -H: preserve hard link groups.
• -S: preserve file sparseness when possible.
• -X: preserve xattrs in user.* namespace.
• -p: preserve permissions.
• -r: recurse into directories.
• --info=progress2 (only if stderr is a terminal): show progress meter (note subtleties in
interpretation).
+l (default)
Like +u, but silently skips “unsafe” symlinks whose target is outside the top-of-transfer
directory. Preserves:
• Metadata.
• Directory structure.
• Symlinks, if a link’s target is within the “top-of-transfer directory”. This is not the
context directory and often not the source either. Also, this creates broken symlinks if the
target is not within the source but is within the top-of-transfer. See examples below.
Equivalent to the rsync(1) options listed for +m plus --links (copy symlinks as symlinks unless
otherwise specified) and --safe-links (silently skip unsafe symlinks).
+u Like +l, but replaces with their target “unsafe” symlinks whose target is outside the
top-of-transfer directory, and thus can copy data outside the context directory into the image.
Preserves:
• Metadata.
• Directory structure.
• Symlinks, if a link’s target is within the “top-of-transfer directory”. This is not the
context directory and often not the source either. Also, this creates broken symlinks if the
target is not within the source but is within the top-of-transfer. See examples below.
Equivalent to the rsync(1) options listed for +m plus --links (copy symlinks as symlinks unless
otherwise specified) and --copy-unsafe-links (copy the target of unsafe symlinks).
+z No default arguments. Directories will not be descended, no metadata will be preserved, and
both hard and symbolic links will be ignored, except as otherwise specified by rsync(1) options
starting with a hyphen. (Note that -a/--archive is discouraged because it omits some metadata
and handles symlinks inappropriately for containers.)
NOTE:
rsync(1) supports a configuration file ~/.popt that alters its command line processing. Currently,
this configuration is respected for RSYNC arguments, but that may change without notice.
Disallowed rsync(1) features
A small number of rsync(1) features are actively disallowed:
1. rsync: and ssh: transports are an error. Charliecloud needs access to the entire input to compute
cache hit or miss, and these transports make that impossible. It is possible these will become
available in the future (please let us know if that is your use case!). For now, the workaround is
to install rsync(1) in the image and use it in a RUN instruction, though only the instruction text
will be considered for the cache.
2. Option arguments must be delimited with = (equals). For example, to set the block size to 4 MiB,
you must say --block-size=4M or -B=4M. -B4M will be interpreted as the three arguments -B, -4, and
-M; --block-size 4M will be interpreted as --block-size with no argument and a copy source named
4M. This is so Charliecloud can process rsync(1) options without knowing which ones take an
argument.
3. Invalid rsync(1) options:
--daemon
Running rsync(1) in daemon mode does not make sense for container build.
-n, --dry-run
This makes the copy a no-op, and Charliecloud may want to use it internally in the future.
--remove-source-files
This would let the instruction alter the context directory.
Note that there are likely other flags that don’t make sense and/or cause undesirable behavior. We have
not characterized this problem.
Build cache
The instruction is a cache hit if the metadata of all source files is unchanged (specifically: filename,
file type and permissions, xattrs, size, and last modified time). Unlike Docker, Charliecloud does not
use file contents. This has two implications. First, it is possible to fool the cache by manually
restoring the last-modified time. Second, RSYNC is I/O-intensive even when it hits, because it must
stat(2) every source file before checking the cache. However, this is still less I/O than reading the
file content too.
Notably, Charliecloud’s cache ignores rsync(1)’s own internal notion of whether anything would be
transferred (e.g., rsync -ni). This may change in the future.
Examples and tutorial
All of these examples use the same input, whose content will be introduced gradually, using edited output
of ls -oghR (which is like ls -lhR but omits user and group). Examples assume a umask of 0007. The
Dockerfile instructions listed also assume a preceding:
FROM alpine:3.17
RUN mkdir /dst
i.e., a simple base image containing a top-level directory dst.
Many additional examples are available in the source code in the file test/build/50_rsync.bats.
We begin by copying regular files. The context directory ctx contains, in part, two directories
containing one regular file each. Note that one of these files (file-basic1) and one of the directories
(basic1) have strange permissions.
./ctx:
drwx---r-x 2 60 Oct 11 13:20 basic1
drwxrwx--- 2 60 Oct 11 13:20 basic2
./ctx/basic1:
-rw----r-- 1 12 Oct 11 13:20 file-basic1
./ctx/basic2:
-rw-rw---- 1 12 Oct 11 13:20 file-basic2
The simplest form of RSYNC is to copy a single file into a specified directory:
RSYNC /basic1/file-basic1 /dst
resulting in:
$ ls -oghR dst
dst:
-rw----r-- 1 12 Oct 11 13:26 file-basic1
Note that file-basic1’s metadata — here its odd permissions — are preserved. 1 is the number of hard
links to the file, and 12 is the file size.
One can also rename the destination by specifying a new file name, and with +z, not copy metadata (from
here on the ls command is omitted for brevity):
RSYNC +z /basic1/file-basic1 /dst/file-basic1_nom
dst:
-rw------- 1 12 Sep 21 15:51 file-basic1_nom
A trailing slash on the destination creates a new directory and places the source file within:
RSYNC /basic1/file-basic1 /dst/new/
dst:
drwxrwx--- 1 22 Oct 11 13:26 new
dst/new:
-rw----r-- 1 12 Oct 11 13:26 file-basic1
With multiple source files, the destination trailing slash is optional:
RSYNC /basic1/file-basic1 /basic2/file-basic2 /dst/newB
dst:
drwxrwx--- 1 44 Oct 11 13:26 newB
dst/newB:
-rw----r-- 1 12 Oct 11 13:26 file-basic1
-rw-rw---- 1 12 Oct 11 13:26 file-basic2
For directory sources, the presence or absence of a trailing slash is highly significant. Without one,
the directory itself is placed in the destination (recall that this would rename a source file):
RSYNC /basic1 /dst/basic1_new
dst:
drwxrwx--- 1 12 Oct 11 13:28 basic1_new
dst/basic1_new:
drwx---r-x 1 22 Oct 11 13:28 basic1
dst/basic1_new/basic1:
-rw----r-- 1 12 Oct 11 13:28 file-basic1
A source trailing slash means copy the contents of a directory rather than the directory itself.
Importantly, however, the directory’s metadata is copied to the destination directory.
RSYNC /basic1/ /dst/basic1_renamed
dst:
drwx---r-x 1 22 Oct 11 13:28 basic1_renamed
dst/basic1_renamed:
-rw----r-- 1 12 Oct 11 13:28 file-basic1
One gotcha is that RSYNC +z is a no-op if the source is a directory:
RSYNC +z /basic1 /dst/basic1_newC
dst:
At least -r is needed with +z in this case:
RSYNC +z -r /basic1/ /dst/basic1_newD
dst:
drwx------ 1 22 Oct 11 13:28 basic1_newD
dst/basic1_newD:
-rw------- 1 12 Oct 11 13:28 file-basic1
Multiple source directories can be specified, including with wildcards. This example also illustrates
that copies files are by default merged with content already existing in the image.
RUN mkdir /dst/dstC && echo file-dstC > /dst/dstC/file-dstC
RSYNC /basic* /dst/dstC
dst:
drwxrwx--- 1 42 Oct 11 13:33 dstC
dst/dstC:
drwx---r-x 1 22 Oct 11 13:33 basic1
drwxrwx--- 1 22 Oct 11 13:33 basic2
-rw-rw---- 1 10 Oct 11 13:33 file-dstC
dst/dstC/basic1:
-rw----r-- 1 12 Oct 11 13:33 file-basic1
dst/dstC/basic2:
-rw-rw---- 1 12 Oct 11 13:33 file-basic2
Trailing slashes can be specified independently for each source:
RUN mkdir /dst/dstF && echo file-dstF > /dst/dstF/file-dstF
RSYNC /basic1 /basic2/ /dst/dstF
dst:
drwxrwx--- 1 52 Oct 11 13:33 dstF
dst/dstF:
drwx---r-x 1 22 Oct 11 13:33 basic1
-rw-rw---- 1 12 Oct 11 13:33 file-basic2
-rw-rw---- 1 10 Oct 11 13:33 file-dstF
dst/dstF/basic1:
-rw----r-- 1 12 Oct 11 13:33 file-basic1
Bare / (i.e., the entire context directory) is considered to have a trailing slash:
RSYNC / /dst
dst:
drwx---r-x 1 22 Oct 11 13:33 basic1
drwxrwx--- 1 22 Oct 11 13:33 basic2
dst/basic1:
-rw----r-- 1 12 Oct 11 13:33 file-basic1
dst/basic2:
-rw-rw---- 1 12 Oct 11 13:33 file-basic2
To replace (rather than merge with) existing content, use --delete. Note also that wildcards can be
combined with trailing slashes and that the directory gets the metadata of the first slashed directory.
RUN mkdir /dst/dstG && echo file-dstG > /dst/dstG/file-dstG
RSYNC --delete /basic*/ /dst/dstG
dst:
drwx---r-x 1 44 Oct 11 14:00 dstG
dst/dstG:
-rw----r-- 1 12 Oct 11 14:00 file-basic1
-rw-rw---- 1 12 Oct 11 14:00 file-basic2
Symbolic links in the source(s) add significant complexity. Like rsync(1), RSYNC can do one of three
things with a given symlink:
1. Ignore it, silently or with a warning.
2. Preserve it: copy as a symlink, with the same target.
3. Dereference it: copy the target instead.
These actions are selected independently for safe symlinks and unsafe symlinks. Safe symlinks are those
which point to a target within the top of transfer, which is the deepest directory in the source path
with a trailing slash. For example, /foo/bar’s top-of-transfer is /foo (regardless of whether bar is a
directory or file), while /foo/bar/’s top-of-transfer is /foo/bar.
For the symlink examples, the context contains two sub-directories with a variety of symlinks, as well as
a sibling file and directory outside the context. All of these links are valid on the host. In this
listing, the absolute path to the parent of the context directory is replaced with /....
.:
drwxrwx--- 9 200 Oct 11 14:00 ctx
drwxrwx--- 2 60 Oct 11 14:00 dir-out
-rw-rw---- 1 9 Oct 11 14:00 file-out
./ctx:
drwxrwx--- 3 320 Oct 11 14:00 sym1
./ctx/sym1:
lrwxrwxrwx 1 13 Oct 11 14:00 dir-out_rel -> ../../dir-out
drwxrwx--- 2 60 Oct 11 14:00 dir-sym1
lrwxrwxrwx 1 8 Oct 11 14:00 dir-sym1_direct -> dir-sym1
lrwxrwxrwx 1 10 Oct 11 14:00 dir-top_rel -> ../dir-top
lrwxrwxrwx 1 47 Oct 11 14:00 file-out_abs -> /.../file-out
lrwxrwxrwx 1 14 Oct 11 14:00 file-out_rel -> ../../file-out
-rw-rw---- 1 10 Oct 11 14:00 file-sym1
lrwxrwxrwx 1 57 Oct 11 14:00 file-sym1_abs -> /.../ctx/sym1/file-sym1
lrwxrwxrwx 1 9 Oct 11 14:00 file-sym1_direct -> file-sym1
lrwxrwxrwx 1 17 Oct 11 14:00 file-sym1_upover -> ../sym1/file-sym1
lrwxrwxrwx 1 51 Oct 11 14:00 file-top_abs -> /.../ctx/file-top
lrwxrwxrwx 1 11 Oct 11 14:00 file-top_rel -> ../file-top
./ctx/sym1/dir-sym1:
-rw-rw---- 1 14 Oct 11 14:00 dir-sym1.file
./dir-out:
-rw-rw---- 1 13 Oct 11 14:00 dir-out.file
By default, safe symlinks are preserved while unsafe symlinks are silently ignored:
RSYNC /sym1 /dst
dst:
drwxrwx--- 1 206 Oct 11 17:10 sym1
dst/sym1:
drwxrwx--- 1 26 Oct 11 17:10 dir-sym1
lrwxrwxrwx 1 8 Oct 11 17:10 dir-sym1_direct -> dir-sym1
lrwxrwxrwx 1 10 Oct 11 17:10 dir-top_rel -> ../dir-top
-rw-rw---- 1 10 Oct 11 17:10 file-sym1
lrwxrwxrwx 1 9 Oct 11 17:10 file-sym1_direct -> file-sym1
lrwxrwxrwx 1 17 Oct 11 17:10 file-sym1_upover -> ../sym1/file-sym1
lrwxrwxrwx 1 17 Oct 11 17:10 file-sym2_upover -> ../sym2/file-sym2
lrwxrwxrwx 1 11 Oct 11 17:10 file-top_rel -> ../file-top
dst/sym1/dir-sym1:
-rw-rw---- 1 14 Oct 11 17:10 dir-sym1.file
The source files have four rough fates:
1. Regular files and directories (file-sym1 and dir-sym1). These are copied into the image unchanged,
including metadata.
2. Safe symlinks, now broken. This is one of the gotchas of RSYNC’s top-of-transfer directory (here host
path ./ctx, image path /) differing from the source directory (./ctx/sym1, /sym1), because the latter
lacks a trailing slash. dir-top_rel, file-sym2_upover, and file-top_rel all ascend only as high as
./ctx (host path, / image) before re-descending. This is within the top-of-transfer, so the symlinks
are safe and thus copied unchanged, but their targets were not included in the copy.
3. Safe symlinks, still valid.
1. dir-sym1_direct and file-sym1_direct point directly to files in the same directory.
2. dir-sym1_upover and file-sym1_upover point to files in the same directory, but by first ascending
into their parent — within the top-of-transfer, so they are safe — and then re-descending. If sym1
were renamed during the copy, these links would break.
4. Unsafe symlinks, which are ignored by the copy and do not appear in the image.
1. Absolute symlinks are always unsafe (*_abs).
2. dir-out_rel and file-out_rel are relative symlinks that ascend above the top-of-transfer, in this
case to targets outside the context, and are thus unsafe.
The top-of-transfer can be changed to sym1 with a trailing slash. This also adds sym1 to the destination
so the resulting directory structure is the same.
RSYNC /sym1/ /dst/sym1
dst:
drwxrwx--- 1 96 Oct 11 17:10 sym1
dst/sym1:
drwxrwx--- 1 26 Oct 11 17:10 dir-sym1
lrwxrwxrwx 1 8 Oct 11 17:10 dir-sym1_direct -> dir-sym1
-rw-rw---- 1 10 Oct 11 17:10 file-sym1
lrwxrwxrwx 1 9 Oct 11 17:10 file-sym1_direct -> file-sym1
dst/sym1/dir-sym1:
-rw-rw---- 1 14 Oct 11 17:10 dir-sym1.file
*_upover and *-out_rel are now unsafe and replaced with their targets.
Another common use case is to follow unsafe symlinks and copy their targets in place of the links. This
is accomplished with +u:
RSYNC +u /sym1/ /dst/sym1
dst:
drwxrwx--- 1 352 Oct 11 17:10 sym1
dst/sym1:
drwxrwx--- 1 24 Oct 11 17:10 dir-out_rel
drwxrwx--- 1 26 Oct 11 17:10 dir-sym1
lrwxrwxrwx 1 8 Oct 11 17:10 dir-sym1_direct -> dir-sym1
drwxrwx--- 1 24 Oct 11 17:10 dir-top_rel
-rw-rw---- 1 9 Oct 11 17:10 file-out_abs
-rw-rw---- 1 9 Oct 11 17:10 file-out_rel
-rw-rw---- 1 10 Oct 11 17:10 file-sym1
-rw-rw---- 1 10 Oct 11 17:10 file-sym1_abs
lrwxrwxrwx 1 9 Oct 11 17:10 file-sym1_direct -> file-sym1
-rw-rw---- 1 10 Oct 11 17:10 file-sym1_upover
-rw-rw---- 1 10 Oct 11 17:10 file-sym2_abs
-rw-rw---- 1 10 Oct 11 17:10 file-sym2_upover
-rw-rw---- 1 9 Oct 11 17:10 file-top_abs
-rw-rw---- 1 9 Oct 11 17:10 file-top_rel
dst/sym1/dir-out_rel:
-rw-rw---- 1 13 Oct 11 17:10 dir-out.file
dst/sym1/dir-sym1:
-rw-rw---- 1 14 Oct 11 17:10 dir-sym1.file
dst/sym1/dir-top_rel:
-rw-rw---- 1 13 Oct 11 17:10 dir-top.file
Now all the unsafe symlinks noted above are present in the image, but they have changed to the normal
files and directories pointed to.
WARNING:
This feature lets you copy files outside the context into the image, unlike other container builders
where COPY can never access anything outside the context.
The sources themselves, if symlinks, do not get special treatment:
RSYNC /sym1/file-sym1_direct /sym1/file-sym1_upover /dst
dst:
lrwxrwxrwx 1 9 Oct 11 17:10 file-sym1_direct -> file-sym1
Note that file-sym1_upover does not appear in the image, despite being named explicitly in the
instruction, because it is an unsafe symlink.
If the destination is a symlink to a file, and the source is a file, the link is replaced and the target
is unchanged. (If the source is a directory, that is an error.)
RUN touch /dst/file-dst && ln -s file-dst /dst/file-dst_direct
RSYNC /file-top /dst/file-dst_direct
dst:
-rw-rw---- 1 0 Oct 11 17:42 file-dst
-rw-rw---- 1 9 Oct 11 17:42 file-dst_direct
If the destination is a symlink to a directory, the link is followed:
RUN mkdir /dst/dir-dst && ln -s dir-dst /dst/dir-dst_direct
RSYNC /file-top /dst/dir-dst_direct
dst:
drwxrwx--- 1 16 Oct 11 17:50 dir-dst
lrwxrwxrwx 1 7 Oct 11 17:50 dir-dst_direct -> dir-dst
dst/dir-dst:
-rw-rw---- 1 9 Oct 11 17:50 file-top
Examples
Build image bar using ./foo/bar/Dockerfile and context directory ./foo/bar:
$ ch-image build -t bar -f ./foo/bar/Dockerfile ./foo/bar
[...]
grown in 4 instructions: bar
Same, but infer the image name and Dockerfile from the context directory path:
$ ch-image build ./foo/bar
[...]
grown in 4 instructions: bar
Build using humongous vendor compilers you want to bind-mount instead of installing into the image:
$ ch-image build --bind /opt/bigvendor:/opt .
$ cat Dockerfile
FROM centos:7
RUN /opt/bin/cc hello.c
#COPY /opt/lib/*.so /usr/local/lib # fail: COPY doesn’t bind mount
RUN cp /opt/lib/*.so /usr/local/lib # possible workaround
RUN ldconfig
BUILD-CACHE
$ ch-image [...] build-cache [...]
Print basic information about the cache. If -v is given, also print some Git statistics and the Git
repository configuration.
If any of the following options are given, do the corresponding operation before printing. Multiple
options can be given, in which case they happen in this order.
--dot Create a DOT export of the tree named ./build-cache.dot and a PDF rendering ./build-cache.pdf.
Requires graphviz and git2dot.
--gc Run Git garbage collection on the cache, including full de-duplication of similar files. This
will immediately remove all cache entries not currently reachable from a named branch (which is
likely to cause corruption if the build cache is being accessed concurrently by another
process). The operation can take a long time on large caches.
--reset
Clear and re-initialize the build cache.
--tree Print a text tree of the cache using Git’s git log --graph feature. If -v is also given, the
tree has more detail.
DELETE
$ ch-image [...] delete IMAGE_GLOB [IMAGE_GLOB ... ]
Delete the image(s) described by each IMAGE_GLOB from the storage directory (including all build stages).
IMAGE_GLOB can be either a plain image reference or an image reference with glob characters to match
multiple images. For example, ch-image delete 'foo*' will delete all images whose names start with foo.
Multiple images and/or globs can also be given in a single command line.
Importantly, this sub-command does not also remove the image from the build cache. Therefore, it can be
used to reduce the size of the storage directory, trading off the time needed to retrieve an image from
cache.
WARNING:
Glob characters must be quoted or otherwise protected from the shell, which also desires to interpret
them and will do so incorrectly.
GESTALT
$ ch-image [...] gestalt [SELECTOR]
Provide information about the configuration and available features of ch-image. End users generally will
not need this; it is intended for testing and debugging.
SELECTOR is one of:
• bucache. Exit successfully if the build cache is available, unsuccessfully with an error message
otherwise. With -v, also print version information about dependencies.
• bucache-dot. Exit successfully if build cache DOT trees can be written, unsuccessfully with an error
message otherwise. With -v, also print version information about dependencies.
• python-path. Print the path to the Python interpreter in use and exit successfully.
• storage-path. Print the storage directory path and exit successfully.
LIST
Print information about images. If no argument given, list the images in builder storage.
Synopsis
$ ch-image [...] list [-l] [IMAGE_REF]
Description
Optional argument:
-l, --long
Use long format (name, last change timestamp) when listing images.
-u, --undeletable
List images that can be undeleted. Can also be spelled --undeleteable.
IMAGE_REF
Print details of what’s known about IMAGE_REF, both locally and in the remote registry, if any.
Examples
List images in builder storage:
$ ch-image list
alpine:3.17 (amd64)
alpine:latest (amd64)
debian:buster (amd64)
Print details about Debian Buster image:
$ ch-image list debian:buster
details of image: debian:buster
in local storage: no
full remote ref: registry-1.docker.io:443/library/debian:buster
available remotely: yes
remote arch-aware: yes
host architecture: amd64
archs available: 386 bae2738ed83
amd64 98285d32477
arm/v7 97247fd4822
arm64/v8 122a0342878
For remotely available images like Debian Buster, the associated digest is listed beside each available
architecture. Importantly, this feature does not provide the hash of the local image, which is only
calculated on push.
IMPORT
$ ch-image [...] import PATH IMAGE_REF
Copy the image at PATH into builder storage with name IMAGE_REF. PATH can be:
• an image directory
• a tarball with no top-level directory (a.k.a. a “tarbomb”)
• a standard tarball with one top-level directory
If the imported image contains Charliecloud metadata, that will be imported unchanged, i.e., images
exported from ch-image builder storage will be functionally identical when re-imported.
WARNING:
Descendant images (i.e., FROM the imported IMAGE_REF) are linked using IMAGE_REF only. If a new image
is imported under a new IMAGE_REF, all instructions descending from that IMAGE_REF will still hit,
even if the new image is different.
PULL
Pull the image described by the image reference IMAGE_REF from a repository to the local filesystem.
Synopsis
$ ch-image [...] pull [...] IMAGE_REF [DEST_REF]
See the FAQ for the gory details on specifying image references.
Description
Destination:
DEST_REF
If specified, use this as the destination image reference, rather than IMAGE_REF. This lets you
pull an image with a complicated reference while storing it locally with a simpler one.
Options:
--last-layer N
Unpack only N layers, leaving an incomplete image. This option is intended for debugging.
--parse-only
Parse IMAGE_REF, print a parse report, and exit successfully without talking to the internet or
touching the storage directory.
This script does a fair amount of validation and fixing of the layer tarballs before flattening in order
to support unprivileged use despite image problems we frequently see in the wild. For example, device
files are ignored, and file and directory permissions are increased to a minimum of rwx------ and
rw------- respectively. Note, however, that symlinks pointing outside the image are permitted, because
they are not resolved until runtime within a container.
The following metadata in the pulled image is retained; all other metadata is currently ignored. (If you
have a need for additional metadata, please let us know!)
• Current working directory set with WORKDIR is effective in downstream Dockerfiles.
• Environment variables set with ENV are effective in downstream Dockerfiles and also written to
/ch/environment for use in ch-run --set-env.
• Mount point directories specified with VOLUME are created in the image if they don’t exist, but no
other action is taken.
Note that some images (e.g., those with a “version 1 manifest”) do not contain metadata. A warning is
printed in this case.
Examples
Download the Debian Buster image matching the host’s architecture and place it in the storage directory:
$ uname -m
aarch32
pulling image: debian:buster
requesting arch: arm64/v8
manifest list: downloading
manifest: downloading
config: downloading
layer 1/1: c54d940: downloading
flattening image
layer 1/1: c54d940: listing
validating tarball members
resolving whiteouts
layer 1/1: c54d940: extracting
image arch: arm64
done
Same, specifying the architecture explicitly:
$ ch-image --arch=arm/v7 pull debian:buster
pulling image: debian:buster
requesting arch: arm/v7
manifest list: downloading
manifest: downloading
config: downloading
layer 1/1: 8947560: downloading
flattening image
layer 1/1: 8947560: listing
validating tarball members
resolving whiteouts
layer 1/1: 8947560: extracting
image arch: arm (may not match host arm64/v8)
PUSH
Push the image described by the image reference IMAGE_REF from the local filesystem to a repository.
Synopsis
$ ch-image [...] push [--image DIR] IMAGE_REF [DEST_REF]
See the FAQ for the gory details on specifying image references.
Description
Destination:
DEST_REF
If specified, use this as the destination image reference, rather than IMAGE_REF. This lets you
push to a repository without permanently adding a tag to the image.
Options:
--image DIR
Use the unpacked image located at DIR rather than an image in the storage directory named
IMAGE_REF.
Because Charliecloud is fully unprivileged, the owner and group of files in its images are not meaningful
in the broader ecosystem. Thus, when pushed, everything in the image is flattened to user:group
root:root. Also, setuid/setgid bits are removed, to avoid surprises if the image is pulled by a
privileged container implementation.
Examples
Push a local image to the registry example.com:5000 at path /foo/bar with tag latest. Note that in this
form, the local image must be named to match that remote reference.
$ ch-image push example.com:5000/foo/bar:latest
pushing image: example.com:5000/foo/bar:latest
layer 1/1: gathering
layer 1/1: preparing
preparing metadata
starting upload
layer 1/1: a1664c4: checking if already in repository
layer 1/1: a1664c4: not present, uploading
config: 89315a2: checking if already in repository
config: 89315a2: not present, uploading
manifest: uploading
cleaning up
done
Same, except use local image alpine:3.17. In this form, the local image name does not have to match the
destination reference.
$ ch-image push alpine:3.17 example.com:5000/foo/bar:latest
pushing image: alpine:3.17
destination: example.com:5000/foo/bar:latest
layer 1/1: gathering
layer 1/1: preparing
preparing metadata
starting upload
layer 1/1: a1664c4: checking if already in repository
layer 1/1: a1664c4: not present, uploading
config: 89315a2: checking if already in repository
config: 89315a2: not present, uploading
manifest: uploading
cleaning up
done
Same, except use unpacked image located at /var/tmp/image rather than an image in ch-image storage.
(Also, the sole layer is already present in the remote registry, so we don’t upload it again.)
$ ch-image push --image /var/tmp/image example.com:5000/foo/bar:latest
pushing image: example.com:5000/foo/bar:latest
image path: /var/tmp/image
layer 1/1: gathering
layer 1/1: preparing
preparing metadata
starting upload
layer 1/1: 892e38d: checking if already in repository
layer 1/1: 892e38d: already present
config: 546f447: checking if already in repository
config: 546f447: not present, uploading
manifest: uploading
cleaning up
done
RESET
$ ch-image [...] reset
Delete all images and cache from ch-image builder storage.
UNDELETE
$ ch-image [...] undelete IMAGE_REF
If IMAGE_REF has been deleted but is in the build cache, recover it from the cache. Only available when
the cache is enabled, and will not overwrite IMAGE_REF if it exists.
ENVIRONMENT VARIABLES
CH_IMAGE_USERNAME, CH_IMAGE_PASSWORD
Username and password for registry authentication. See important caveats in section
“Authentication” above.
CH_LOG_FILE
If set, append log chatter to this file, rather than standard error. This is useful for debugging
situations where standard error is consumed or lost.
Also sets verbose mode if not already set (equivalent to --verbose).
CH_LOG_FESTOON
If set, prepend PID and timestamp to logged chatter.
CH_XATTRS
If set, save xattrs in the build cache and restore them when rebuilding from the cache (equivalent
to --xattrs).
REPORTING BUGS
If Charliecloud was obtained from your Linux distribution, use your distribution’s bug reporting
procedures.
Otherwise, report bugs to: https://github.com/hpc/charliecloud/issues
SEE ALSO
charliecloud(7)
Full documentation at: <https://hpc.github.io/charliecloud>
COPYRIGHT
2014–2023, Triad National Security, LLC and others
0.37 2024-04-01 05:37 UTC CH-IMAGE(1)