Provided by: airspyhf_1.6.8-4build1_amd64 

NAME
airspyhf_rx - probe device and show configuration
DESCRIPTION
The AirspyHF is a tiny and efficient software defined radio receiver.
This application lets the user probe the device and show configuration.
SYNOPSIS
airspy_rx
OPTIONS
Usage:
-r <filename>
Receive data into the file; stdout emits values on standard output
-s <serial number>
Open device with specified 64bits serial number
-f <frequency>
Set frequency in MHz between 9 kHz - 31 MHz or 60 - 260 MHz
-a <sample_rate>
Set sample rate, at the moment only 768 kS/s supported
-n <#samples>
Number of samples to transfer (default is unlimited)
-d Verbose mode
-w Receive data into file with WAV header and automatic name This is for SDR# compatibility and may
not work with other software It works even with HDSDR
-g on|off
HF AGC on / off
-l high|low
HF AGC threshold high / low (when AGC On)
-t <value>
HF attenuator value 0..8 (each step increases 6 dB the attenuation)
-m on|off
on to activate LNA (preamplifier): +6 dB gain - compensated in digital.
-z Do not attempt to use manual AGC/LNA commands (useful in order to avoid errors with old firmware)
SEE ALSO
AirspyHF web page: https://airspy.com/airspy-hf-plus
Other airspyhf programs:
airspyhf_rx(1), airspyhf_gpio(1), airspyhf_lib_version(1), airspyhf_rx(1)
AUTHOR
This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).
COPYRIGHT
Copyright (c) 2020 A. Maitland Bottoms <bottoms@debian.org>
This program is free software: you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
AIRSPYHF 2020.08.10 airspyhf_rx(1)