Ubuntu Manpage: waybar - configuration file

NAME

       waybar - configuration file

DESCRIPTION

       The configuration uses the JSON file format and is named config.

       Valid locations for this file are:

       •   $XDG_CONFIG_HOME/waybar/config
       •   ~/.config/waybar/config
       •   ~/waybar/config
       •   /etc/xdg/waybar/config
       •   /etc/xdg/waybar/config

       A       good      starting      point      is      the      default      configuration      found      at
       https://github.com/Alexays/Waybar/blob/master/resources/config Also a minimal example  configuration  can
       be found on the at the bottom of this man page.

BAR CONFIGURATION

layer
typeof: string
default: bottom
Decide if the bar is displayed in front (top) of the windows or behind (bottom)
them.

output
typeof: string|array
Specifies on which screen this bar will be displayed. Exclamation mark(!) can be used to exclude
specific output.

position
typeof: string
default: top
Bar position, can be top, bottom, left, right.

height
typeof: integer
Height to be used by the bar if possible. Leave blank for a dynamic value.

width
typeof: integer
Width to be used by the bar if possible. Leave blank for a dynamic value.

modules-left
typeof: array
Modules that will be displayed on the left.

modules-center
typeof: array
Modules that will be displayed in the center.

modules-right
typeof: array
Modules that will be displayed on the right.

margin
typeof: string
Margins value using the CSS format without units.

margin-<top|left|bottom|right>
typeof: integer
Margins value without units.

spacing
typeof: integer
Size of gaps in between of the different modules.

name
typeof: string
Optional name added as a CSS class, for styling multiple waybars.

mode
typeof: string
Selects one of the preconfigured display modes. This is an equivalent of the sway-bar(5) mode
command and supports the same values: dock, hide, invisible, overlay.
Note: hide and invisible modes may be not as useful without Sway IPC.

exclusive
typeof: bool
default: true
Option to request an exclusive zone from the compositor. Disable this to allow drawing application
windows underneath or on top of the bar.

fixed-center
typeof: bool
default: true
Prefer fixed center position for the `modules-center` block. The center block will stay in the middle
of the bar whenever possible. It can still be pushed around if other blocks need more space. When
false, the center block is centered in the space between the left and right block.

passthrough
typeof: bool
default: false
Option to pass any pointer events to the window under the bar.
Intended to be used with either top or overlay layers and without exclusive zone.

gtk-layer-shell
typeof: bool
default: true
Option to disable the use of gtk-layer-shell for popups.
Only functional if compiled with gtk-layer-shell support.

ipc
typeof: bool
default: false
Option to subscribe to the Sway IPC bar configuration and visibility events and control waybar with
swaymsg bar commands.
Requires bar_id value from sway configuration to be either passed with the -b commandline argument
or specified with the id option.

id
typeof: string
bar_id for the Sway IPC. Use this if you need to override the value passed with the -b bar_id
commandline argument for the specific bar instance.

include
typeof: string|array
Paths to additional configuration files.
Each file can contain a single object with any of the bar configuration options. In case of duplicate
options, the first defined value takes precedence, i.e. including file -> first included file -> etc.
Nested includes are permitted, but make sure to avoid circular imports. For a multi-bar config, the
include directive affects only current bar configuration object.

MODULE FORMAT

       You                   can                   use                   PangoMarkupFormat                  (See
       https://developer.gnome.org/pango/stable/PangoMarkupFormat.html#PangoMarkupFormat).

       e.g.

           "format": "<span style="italic">{}</span>"

MULTIPLE INSTANCES OF A MODULE

       If you want to have a second instance of a module, you can suffix it by a '#'  and  a  custom  name.  For
       example if you want a second battery module, you can add "battery#bat2" to your modules. To configure the
       newly added module, you then also add a module configuration with the same name.

       This could then look something like this (this is an incomplete example):

           "modules-right": ["battery", "battery#bat2"],
           "battery": {
                "bat": "BAT1"
           },
           "battery#bat2": {
                "bat": "BAT2"
           }

MINIMAL CONFIGURATION

       A minimal config file could look like this:

           {
                "layer": "top",
                "modules-left": ["sway/workspaces", "sway/mode"],
                "modules-center": ["sway/window"],
                "modules-right": ["battery", "clock"],
                "sway/window": {
                     "max-length": 50
                },
                "battery": {
                     "format": "{capacity}% {icon}",
                     "format-icons": ["", "", "", "", ""]
                },
                "clock": {
                     "format-alt": "{:%a, %d. %b  %H:%M}"
                }
           }

MULTI OUTPUT CONFIGURATION

   Limit a configuration to some outputs
           {
                "layer": "top",
                "output": "eDP-1",
                "modules-left": ["sway/workspaces", "sway/mode"],
                ...

           }

           {
                "layer": "top",
                "output": ["eDP-1", "VGA"],
                "modules-left": ["sway/workspaces", "sway/mode"],
                ...
           }

   Configuration of multiple outputs
       Don't specify an output to create multiple bars on the same screen.

           [{
                "layer": "top",
                "output": "eDP-1",
                "modules-left": ["sway/workspaces", "sway/mode"],
                ...
           }, {
                "layer": "top",
                "output": "VGA",
                "modules-right": ["clock"],
                ...
           }]

   Rotating modules
       When  positioning  Waybar  on  the  left or right side of the screen, sometimes it's useful to be able to
       rotate the contents of a module so the text runs vertically. This can be done using the "rotate" property
       of the module. Example:

           {
                "clock": {
                     "rotate": 90
                }
           }

       Valid options for the "rotate" property are: 0, 90, 180 and 270.

   Grouping modules
       Module groups allow stacking modules in the direction orthogonal to the bar direction. When  the  bar  is
       positioned  on the top or bottom of the screen, modules in a group are stacked vertically. Likewise, when
       positioned on the left or right, modules in a group are stacked horizontally.

       A module group is defined by specifying a module named "group/some-group-name". The group  must  also  be
       configured with a list of contained modules. Example:

           {
                "modules-right": ["group/hardware", "clock"],

                "group/hardware": {
                     "modules": [
                          "cpu",
                          "memory",
                          "battery"
                     ]
                },

                ...
           }

SUPPORTED MODULES

       •   waybar-backlight(5)
       •   waybar-battery(5)
       •   waybar-bluetooth(5)
       •   waybar-clock(5)
       •   waybar-cpu(5)
       •   waybar-custom(5)
       •   waybar-disk(5)
       •   waybar-idle-inhibitor(5)
       •   waybar-keyboard-state(5)
       •   waybar-memory(5)
       •   waybar-mpd(5)
       •   waybar-network(5)
       •   waybar-pulseaudio(5)
       •   waybar-river-tags(5)
       •   waybar-states(5)
       •   waybar-sway-mode(5)
       •   waybar-sway-window(5)
       •   waybar-sway-workspaces(5)
       •   waybar-wlr-taskbar(5)
       •   waybar-wlr-workspaces(5)
       •   waybar-temperature(5)
       •   waybar-tray(5)

                                                   2022-01-10                                          waybar(5)