NAME

       nhs_ser - Driver for NHS Nobreaks, senoidal line, with serial port

SYNOPSIS

       nhs_ser -h

       nhs_ser -a UPS_NAME [OPTIONS]

           Note

           This man page only documents the hardware-specific features of the nhs_ser driver. For information
           about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       nhs_ser supports numerous UPS models made by NHS Sistemas Eletronicos LTDA and marketed in Brazil. They
       feature a serial port and a binary wire protocol.

           Note

           Currently this driver only builds on Linux. This is expected to change in future revisions of the
           code.

EXTRA ARGUMENTS

       This driver also supports the following optional settings:

       baud=num
           Set the value of serial port baud rate (default: 2400)

       ah=num
           Battery discharge capacity in Ampere/hour.

       va=num
           Nobreak NOMINAL POWER in VA.

       pf=num
           Power Factor to use in calculations of battery time (default: 0.90).

       vin_low_warn_perc=num
           Voltage In Percentage to calculate warning low level (default: 2.00).

       vin_low_crit_perc=num
           Voltage In Percentage to calculate critical low level (default: 2.00).

       vin_high_warn_perc=num
           Voltage In Percentage to calculate warning high level (default: 2.00).

       vin_high_crit_perc=num
           Voltage In Percentage to calculate critical high level (default: 2.00).

       numbatteries=num
           Num Batteries (override value from nobreak).

       vbat=num
           Battery Voltage (default: 12.00).

       debug_pkt_raw
           Optional flag to enable debug logging of packet bytes.

       debug_pkt_data
           Optional flag to enable debug logging of data packet decoding.

       debug_pkt_hwinfo
           Optional flag to enable debug logging of hwinfo packet decoding.

AUTHORS

       Lucas Willian Bocchi <lucas@lucas.inf.br>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/historic/v2.8.3/

Network UPS Tools 2.8.3                            07/08/2025                                         NHS_SER(8)