Provided by: opensmtpd_7.7.0p0-1_amd64 
NAME
smtpd.conf — SMTP daemon configuration file
DESCRIPTION
smtpd.conf is the configuration file for the mail daemon smtpd(8).
When mail arrives, each “RCPT TO:” command generates a mail envelope. If an envelope matches any of a
pre-designated set of criteria (using the match directive), the message is accepted for delivery. A copy
of the message, as well as its associated envelopes, is saved in the mail queue and later dispatched
according to an associated set of actions (using the action directive). If an envelope does not match
any options, it is rejected. The match rules are evaluated sequentially, with the first match winning.
The format of the configuration file is fairly flexible. The current line can be extended over multiple
lines using a backslash (‘\’). Comments can be put anywhere in the file using a hash mark (‘#’), and
extend to the end of the current line. Care should be taken when commenting out multi-line text: the
comment is effective until the end of the entire block. Argument names not beginning with a letter,
digit, or underscore, as well as reserved words (such as listen, match, and port), must be quoted.
Arguments containing whitespace should be surrounded by double quotes (").
Macros can be defined that are later expanded in context. Macro names must start with a letter, digit,
or underscore, and may contain any of those characters, but may not be reserved words. Macros are not
expanded inside quotes. For example:
lan_addr = "192.168.0.1"
listen on $lan_addr
listen on $lan_addr tls auth
The syntax of smtpd.conf is described below.
action name method [options]
When the queue runner processes an envelope from the mail queue, it carries out the action name,
selected by the match ... action directive when the message was received. The action directive
provides configuration data for delivery attempts. Required lookups are performed at the time of
each delivery attempt. Consequently, changing an action directive or the files it references and
restarting the smtpd(8) daemon causes the changes to take effect for subsequent delivery attempts
for the respective dispatcher name, even for messages that were already stuck in the queue prior
to the configuration changes.
The delivery method parameter may be one of the following:
expand-only
Only accept the message if a delivery method was specified in an aliases or .forward
file.
forward-only
Only accept the message if the recipient results in a remote address after the processing
of aliases or forward file.
lmtp destination [rcpt-to]
Deliver the message to an LMTP server at destination. The location may be expressed as
host:port or as a UNIX socket.
Optionally, rcpt-to might be specified to use the recipient email address (after
expansion) instead of the local user in the LMTP session as RCPT TO.
maildir [pathname] [junk]
Deliver the message to the maildir in pathname if specified, or by default to ~/Maildir.
The pathname may contain format specifiers that are expanded before use (see “FORMAT
SPECIFIERS”).
If the junk argument is provided, the message will be moved to the ‘Junk’ folder if it
contains a positive ‘X-Spam’ header. This folder will be created under pathname if it
does not yet exist.
mbox Deliver the message to the user's mbox with mail.local(8).
mda command
Delegate the delivery to a command that receives the message on its standard input (see
“MDA COMMANDS”).
The command may contain format specifiers that are expanded before use (see “FORMAT
SPECIFIERS”).
relay Relay the message to another SMTP server.
The local delivery methods support additional options:
alias <table>
Use the mapping table for aliases(5) expansion.
ttl n{s|m|h|d}
Specify how long a message may remain in the queue.
user username
Specify the username for performing the delivery, to be looked up with getpwnam(3).
This is used for virtual hosting where a single username is in charge of handling
delivery for all virtual users.
This option is not usable with the mbox delivery method.
Only the delivery user's .forward file will be processed.
userbase <table>
Use the mapping table for user lookups instead of the getpwnam(3) function.
The userbase does not apply to the user option.
virtual <table>
Use the mapping table for virtual expansion. The aliasing table format is described in
table(5).
wrapper name
Use the wrapper specified in mda wrapper.
The relay delivery methods also support additional options:
backup Operate as a backup mail exchanger delivering messages to any mail exchanger with higher
priority.
backup mx name
Operate as a backup mail exchanger delivering messages to any mail exchanger with higher
priority than mail exchanger identified as name.
ca caname
For secure connections, use the certificate authority associated with caname (declared in
a ca directive) to validate the server's identity.
helo heloname
Advertise heloname as the hostname to other mail exchangers during the HELO phase.
helo-src <table>
Use the mapping table to look up a hostname matching the source address, to advertise
during the HELO phase.
domain <domains>
Do not perform MX lookups but look up destination domain in domains and use matching
relay url as relay host.
host relay-url
Do not perform MX lookups but relay messages to the relay host described by relay-url.
The format for relay-url is [proto://[label@]]host[:port]. The following protocols are
available:
smtp Normal SMTP session with opportunistic STARTTLS (the default).
smtp+tls Normal SMTP session with mandatory STARTTLS.
smtp+notls Plain text SMTP session without TLS.
lmtp LMTP session. port is required.
smtps SMTP session with forced TLS on connection. The default port is 465.
Unless noted, port defaults to 25.
The label corresponds to an entry in a credentials table, as documented in table(5). It
is used with the “smtp+tls” and “smtps” protocols for authentication. Server
certificates for those protocols are verified by default.
pki pkiname
For secure connections, use the certificate associated with pkiname (declared in a pki
directive) to prove the client's identity to the remote mail server.
srs When relaying a mail resulting from a forward, use the Sender Rewriting Scheme to rewrite
sender address.
tls [no-verify]
Require TLS to be used when relaying, using mandatory STARTTLS by default. When used
with a smarthost, the protocol must not be “smtp+notls://”. If no-verify is specified,
do not require a valid certificate.
protocols protostr
Define the protocol versions to be used for TLS sessions. Refer to the
tls_config_parse_protocols(3) manpage for the format of protostr.
ciphers cipherstr
Define the list of ciphers that may be used for TLS sessions. Refer to the
tls_config_set_ciphers(3) manpage for the format of cipherstr.
auth <table>
Use the mapping table for connecting to relay-url using credentials. This option is
usable only with host option. The credential table format is described in table(5).
mail-from mailaddr
Use mailaddr as the MAIL FROM address within the SMTP transaction.
src sourceaddr | <sourceaddr>
Use the string or list table sourceaddr for the source IP address, which is useful on
machines with multiple interfaces. If the list contains more than one address, all of
them are used in such a way that traffic is routed as efficiently as possible.
admd authservid
The Administrative Management Domain this mail server belongs to. The authservid will be
forwarded to filters using it to identify or mark authentication-results headers. If omitted, it
defaults to the server name.
bounce warn-interval delay [, delay ...]
Send warning messages to the envelope sender when temporary delivery failures cause a message to
remain in the queue for longer than delay. Each delay parameter consists of a positive decimal
integer and a unit s, m, h, or d. At most four delay parameters can be specified. The default
is "bounce warn-interval 4h", sending a single warning after four hours.
ca caname cert cafile
Associate the Certificate Authority (CA) certificate file cafile with ca entry caname. The ca
entry can be referenced in listen on and action ... relay rules.
filter chain-name chain {filter-name [, ...]}
Register a chain of filters chain-name, consisting of the filters listed in filter-name. Filters
in a filter chain are executed in order of declaration for each phase that they are registered
for. A filter chain may be used in place of a filter for any directive except filter chains
themselves.
filter filter-name phase phase-name match conditions decision
Register a filter filter-name. A decision about what to do with the mail is taken at phase
phase-name when matching conditions. Phases, matching conditions, and decisions are described in
“MAIL FILTERING”, below.
filter filter-name proc proc-name
Register "proc" filter filter-name backed by the proc-name process.
filter filter-name proc-exec command
Register and execute "proc" filter filter-name from command, conformant with the smtpd-filters(7)
API. If command starts with a slash it is executed with an absolute path, otherwise it will be
run from “/usr/libexec/opensmtpd”.
include "pathname"
Replace this directive with the content of the additional configuration file at the absolute
pathname.
listen on interface [family] [options]
Listen on the interface for incoming connections, using the same syntax as ifconfig(8). The
interface parameter may also be an interface group, an IP address, or a domain name. Listening
can optionally be restricted to a specific address family, which can be either inet4 or inet6.
The options are as follows:
auth [<authtable>]
Support SMTPAUTH: clients may only start SMTP transactions after successful
authentication. Users are authenticated against either their own normal login
credentials or a credentials table authtable, the format of which is described in
table(5).
auth-optional [<authtable>]
Support SMTPAUTH optionally: clients need not authenticate, but may do so. This allows a
listen on directive to both accept incoming mail from untrusted senders and permit
outgoing mail from authenticated users (using match auth). It can be used in situations
where it is not possible to listen on a separate port (usually the submission port, 587)
for users to authenticate.
ca caname
For secure connections, use the CA certificate associated with caname (declared in a ca
directive) as the CA certificate when verifying client certificates.
filter name
Apply filter name on connections handled by this listener.
hostname hostname
Use hostname in the greeting banner instead of the default server name.
hostnames <names>
Override the server name for specific addresses. The names table contains a mapping of
IP addresses to hostnames. If the address on which the connection arrives appears in the
mapping, the associated hostname is used.
mask-src
Omit the from part when prepending “Received” headers.
no-dsn Disable the DSN (Delivery Status Notification) extension.
pki pkiname
For secure connections, use the certificate associated with pkiname (declared in a pki
directive) to prove a mail server's identity. This option can be used multiple times to
provide alternate certificates for SNI.
port [port]
Listen on the given port instead of the default port 25.
proxy-v2
Support the PROXYv2 protocol, appropriately rewriting the source address received from
proxy.
received-auth
In “Received” headers, report whether the session was authenticated and by which local
user.
senders <users> [masquerade]
Look up the authenticated user in the users mapping table to find the email addresses
that user is allowed to submit mail as. In addition, if the masquerade option is
provided, the From header is rewritten to match the sender provided in the SMTP session.
smtps Support SMTPS, by default on port 465. Mutually exclusive with tls.
tag tag
Clients connecting to the listener are tagged with the given tag.
tls Support STARTTLS, by default on port 25. Mutually exclusive with smtps.
tls-require [verify]
Like tls, but force clients to establish a secure connection before being allowed to
start an SMTP transaction. With the verify option, clients must also provide a valid
certificate to establish an SMTP session.
protocols protostr
Define the protocol versions to be used for TLS sessions. Refer to the
tls_config_parse_protocols(3) manpage for the format of protostr.
ciphers cipherstr
Define the list of ciphers that may be used for TLS sessions. Refer to the
tls_config_set_ciphers(3) manpage for the format of cipherstr.
listen on socket [options]
Listen for incoming SMTP connections on the Unix domain socket /var/run/smtpd.sock. This is done
by default, even if the directive is absent.
The options are as follows:
filter name
Apply filter name on connections handled by this listener.
mask-src
Omit the from part when prepending “Received” headers.
no-dsn Disable the DSN (Delivery Status Notification) extension.
tag tag
Clients connecting to the listener are tagged with the given tag.
match options action name
If at least one mail envelope matches the options of one match action directive, receive the
incoming message, put a copy into each matching envelope, and atomically save the envelopes to
the mail spool for later processing by the respective dispatcher name.
The following matching options are supported and can all be negated:
[!] for any
Specify that session may address any destination.
[!] for local
Specify that session may address any local domain. This is the default, and may be
omitted.
[!] for domain domain | <domain>
Specify that session may address the string or list table domain.
[!] for domain regex domain | <domain>
Specify that session may address the regex or regex table domain.
[!] for rcpt-to recipient | <recipient>
Specify that session may address the string or list table recipient.
[!] for rcpt-to regex recipient | <recipient>
Specify that session may address the regex or regex table recipient.
[!] from any
Specify that session may originate from any source.
[!] from auth
Specify that session may originate from any authenticated user, no matter the source IP
address.
[!] from auth user | <user>
Specify that session may originate from authenticated user or user list user, no matter
the source IP address.
[!] from auth regex user | <user>
Specify that session may originate from authenticated regex or regex list user, no matter
the source IP address.
[!] from local
Specify that session may only originate from a local IP address, or from the local
enqueuer. This is the default, and may be omitted.
[!] from mail-from sender | <sender>
Specify that session may originate from sender or sender list sender, no matter the
source IP address.
[!] from mail-from regex sender | <sender>
Specify that session may originate from regex or regex list sender, no matter the source
IP address.
[!] from rdns
Specify that session may only originate from an IP address that resolves to a reverse
DNS.
[!] from rdns hostname | <hostname>
Specify that session may only originate from an IP address that resolves to a reverse DNS
matching string or list string hostname.
[!] from rdns regex hostname | <hostname>
Specify that session may only originate from an IP address that resolves to a reverse DNS
matching regex or list regex hostname.
[!] from socket
Specify that session may only originate from the local enqueuer.
[!] from src address | <address>
Specify that session may only originate from string or list table address which can be a
specific address or a subnet expressed in CIDR-notation.
[!] from src regex address | <address>
Specify that session may only originate from regex or regex table address which can be a
specific address or a subnet expressed in CIDR-notation.
In addition, the following transaction options may be matched:
[!] auth
Matches transactions which have been authenticated.
[!] auth username | <username>
Matches transactions which have been authenticated for user or user list username.
[!] auth regex username | <username>
Matches transactions which have been authenticated for regex or regex list username.
[!] helo helo-name | <helo-name>
Specify that session's HELO / EHLO should match the string or list table helo-name.
[!] helo regex helo-name | <helo-name>
Specify that session's HELO / EHLO should match the regex or regex table helo-name.
[!] mail-from sender | <sender>
Specify that transaction's MAIL FROM should match the string or list table sender.
[!] mail-from regex sender | <sender>
Specify that transaction's MAIL FROM should match the regex or regex table sender.
[!] rcpt-to recipient | <recipient>
Specify that transaction's RCPT TO should match the string or list table recipient.
[!] rcpt-to regex recipient | <recipient>
Specify that transaction's RCPT TO should match the regex or regex table recipient.
[!] tag tag
Matches transactions tagged with the given tag.
[!] tag regex tag
Matches transactions tagged with the given tag regex.
[!] tls
Specify that transaction should take place in a TLS channel.
match options reject
Reject the incoming message during the SMTP dialogue. The same options are supported as for the
match action directive.
mda wrapper name command
Associate command with the mail delivery agent wrapper named name. When a local delivery
specifies a wrapper, the command associated with the wrapper will be executed instead. The
command may contain format specifiers (see “FORMAT SPECIFIERS”).
mta max-deferred number
When delivery to a given host is suspended due to temporary failures, cache at most number
envelopes for that host such that they can be delivered as soon as another delivery succeeds to
that host. The default is 100.
pki pkiname cert certfile
Associate certificate file certfile with pki entry pkiname. The pki entry defines a keypair
configuration that can be referenced in listener rules and relay actions.
A certificate chain may be created by appending one or many certificates, including a Certificate
Authority certificate, to certfile. The creation of certificates is documented in starttls(8).
pki pkiname key keyfile
Associate the key located in keyfile with pki entry pkiname.
pki pkiname dhe params
Specify the DHE parameters to use for DHE cipher suites with pki entry pkiname. Valid parameter
values are none, legacy, and auto. For legacy, a fixed key length of 1024 bits is used, whereas
for auto, the key length is determined automatically. The default is none, which disables DHE
cipher suites.
proc proc-name command
Register an external process named proc-name from command, conformant with the smtpd-filters(7)
API. Such processes may be used to share the same instance between multiple filters. If command
starts with a slash it is executed with an absolute path, otherwise it will be run from
“/usr/libexec/opensmtpd”.
queue compression
Store queue files in a compressed format. This may be useful to save disk space.
queue encryption [key]
Encrypt queue files with EVP_aes_256_gcm(3). If no key is specified, it is read with getpass(3).
If the string stdin or a single dash (‘-’) is given instead of a key, the key is read from the
standard input.
queue ttl delay
Set the default expiration time for temporarily undeliverable messages, given as a positive
decimal integer followed by a unit s, m, h, or d. The default is four days (4d).
smtp ciphers control
Set the control string for SSL_CTX_set_cipher_list(3). The default is "HIGH:!aNULL:!MD5".
smtp limit max-mails count
Limit the number of messages to count for each session. The default is 100.
smtp limit max-rcpt count
Limit the number of recipients to count for each transaction. The default is 1000.
smtp max-message-size size
Reject messages larger than size, given as a positive number of bytes or as a string to be parsed
with scan_scaled(3). The default is "35M".
smtp sub-addr-delim character
When resolving the local part of a local email address, ignore the ASCII character and all
characters following it. The default is ‘+’.
srs key secret
Set the secret key to use for SRS, the Sender Rewriting Scheme.
srs key backup secret
Set a backup secret key to use as a fallback for SRS. This can be used to implement SRS key
rotation.
srs ttl delay
Set the time-to-live delay for SRS envelopes. After this delay, a bounce reply to the SRS
address will be discarded to limit risks of forged addresses. The default is four days (4d).
table name [type:]pathname
Tables provide additional configuration information for smtpd(8) in the form of lists or key-
value mappings. The format of the entries depends on what the table is used for. Refer to
table(5) for the exhaustive documentation.
Each table is identified by an arbitrary, unique name.
If the type is db, information is stored in a file created with makemap(8); if it is file or
omitted, information is stored in a plain text file using the format described in table(5). The
pathname to the file must be absolute.
table name {value [, ...]}
Instead of using a separate file, declare a list table containing the given static values. The
table must contain at least one value and may declare multiple values as a comma-separated
(whitespace optional) list.
table name {key=value [, ...]}
Instead of using a separate file, declare a mapping table containing the given static key-value
pairs. The table must contain at least one key-value pair and may declare multiple pairs as a
comma-separated (whitespace optional) list.
MAIL FILTERING
In a regular workflow, smtpd(8) may accept or reject a message based only on the content of envelopes.
Its decisions are about the handling of the message, not about the handling of an active session.
Filtering extends the decision making process by allowing smtpd(8) to stop at each phase of an SMTP
session, check that conditions are met, then decide if a session is allowed to move forward.
With filtering, a session may be interrupted at any phase before an envelope is complete. A message may
also be rejected after being submitted, regardless of whether the envelope was accepted or not.
The following phases are currently supported:
connect upon connection, before a banner is displayed
helo after HELO command is submitted
ehlo after EHLO command is submitted
mail-from after MAIL FROM command is submitted
rcpt-to after RCPT TO command is submitted
data after DATA command is submitted
commit after message is fully is submitted
At each phase, various conditions may be matched. The fcrdns, rdns, and src data are available in all
phases, but other data must have been already submitted before they are available.
fcrdns forward-confirmed reverse DNS is valid
rdns session has a reverse DNS
rdns <table> session has a reverse DNS in table
src <table> source address is in table
helo <table> helo name is in table
auth session is authenticated
auth <table> session username is in table
mail-from <table> sender address is in table
rcpt-to <table> recipient address is in table
These conditions may all be negated by prefixing them with an exclamation mark:
!fcrdns forward-confirmed reverse DNS is invalid
Any conditions using a table may indicate that the table contains regular expressions by prefixing the
table name with the keyword regex.
helo regex <table> helo name matches a regex in table
Finally, a number of decisions may be taken:
bypass the session or transaction bypasses filters
disconnect message the session is disconnected with message
junk the session or transaction is junked, i.e., an ‘X-Spam: yes’ header is
added to any messages
reject message the command is rejected with message
rewrite value the command parameter is rewritten with value
Decisions that involve a message require that the message be RFC valid, meaning that they should either
start with a 4xx or 5xx status code. Decisions can be taken at any phase, though junking can only happen
before a message is committed.
FORMAT SPECIFIERS
Some configuration directives support expansion of their parameters at runtime. Such directives (for
example action maildir, action mda) may use format specifiers which are expanded before delivery or
relaying. The following formats are currently supported:
%{sender} sender email address, may be empty string
%{sender.user} user part of the sender email address, may be empty
%{sender.domain} domain part of the sender email address, may be empty
%{rcpt} recipient email address
%{rcpt.user} user part of the recipient email address
%{rcpt.domain} domain part of the recipient email address
%{dest} recipient email address after expansion
%{dest.user} user part after expansion
%{dest.domain} domain part after expansion
%{user.username} local user
%{user.directory} home directory of the local user
%{mbox.from} name used in mbox From separator lines
%{mda} mda command, only available for mda wrappers
Expansion formats also support partial expansion using the optional bracket notations with substring
offset. For example, with recipient domain “example.org”:
%{rcpt.domain[0]} expands to “e”
%{rcpt.domain[1]} expands to “x”
%{rcpt.domain[8:]} expands to “org”
%{rcpt.domain[-3:]} expands to “org”
%{rcpt.domain[0:6]} expands to “example”
%{rcpt.domain[0:-4]} expands to “example”
In addition, modifiers may be applied to the token. For example, with recipient “User+Tag@Example.org”:
%{rcpt:lowercase} expands to “user+tag@example.org”
%{rcpt:uppercase} expands to “USER+TAG@EXAMPLE.ORG”
%{rcpt:strip} expands to “User@Example.org”
%{rcpt:lowercase|strip} expands to “user@example.org”
For security concerns, expanded values are sanitized and potentially dangerous characters are replaced
with ‘:’. In situations where they are desirable, the “raw” modifier may be applied. For example, with
recipient “user+t?g@example.org”:
%{rcpt} expands to “user+t:g@example.org”
%{rcpt:raw} expands to “user+t?g@example.org”
MDA COMMANDS
When an action delivery method is mda, smtpd(8) runs the associated command for the delivery with the
mail content provided via standard input. The command is expected to read all the mail content.
The exit code of the command reports the outcome of the delivery: status 0 (EX_OK) is a successful
delivery; status 71 (EX_OSERR) and 75 (EX_TEMPFAIL) are temporary failures; and all other exit status are
considered permanent failures.
The following environment variables are set:
DOMAIN The recipient domain.
EXTENSION The sub address of the recipient (may be unset).
HOME The delivery user's login directory.
LOCAL The local part of the recipient user address.
LOGNAME The login name of the user.
ORIGINAL_RECIPIENT The address of the original recipient.
PATH Set to _PATH_DEFPATH. Traditionally /usr/bin:/bin, but expanded to include
/usr/sbin, /sbin, /usr/X11R6/bin, /usr/local/bin, and /usr/local/sbin in OpenBSD.
RECIPIENT The address of the final recipient.
SENDER The address of the sender (might be empty).
SHELL Set to /bin/sh.
USER Synonym of LOGNAME for backwards compatibility.
FILES
/etc/smtpd.conf Default smtpd(8) configuration file.
/etc/mailname If this file exists, the first line is used as the server name. Otherwise, the
server name is derived from the local hostname returned by gethostname(3), either
directly if it is a fully qualified domain name, or by retrieving the associated
canonical name through getaddrinfo(3).
/var/run/smtpd.sock
Unix domain socket for incoming SMTP connections.
/var/spool/smtpd/ Spool directories for mail during processing.
EXAMPLES
The default smtpd.conf file which ships with OpenBSD listens on the loopback network interface (lo0) and
allows for mail from users and daemons on the local machine, as well as permitting email to remote
servers. Some more complex configurations are given below.
This first example is similar to the default configuration, but all outgoing mail is forwarded to a
remote SMTP server. A secrets file is needed to specify a username and password:
# touch /etc/secrets
# chmod 640 /etc/secrets
# chown root:_smtpd /etc/secrets
# echo "bob username:password" > /etc/secrets
smtpd.conf would look like this:
table aliases file:/etc/aliases
table secrets file:/etc/secrets
listen on lo0
action "local_mail" mbox alias <aliases>
action "outbound" relay host smtp+tls://bob@smtp.example.com \
auth <secrets>
match from local for local action "local_mail"
match from local for any action "outbound"
In this second example, the aim is to permit mail delivery and relaying only for users that can
authenticate (using their normal login credentials). An RSA certificate must be provided to prove the
server's identity. The mail server listens on all interfaces the default routes point to. Mail with a
local destination is sent to an external MDA. First, the RSA certificate is created:
# openssl genrsa -out /etc/ssl/private/mail.example.com.key 4096
# openssl req -new -x509 -key /etc/ssl/private/mail.example.com.key \
-out /etc/ssl/mail.example.com.crt -days 365
# chmod 600 /etc/ssl/mail.example.com.crt
# chmod 600 /etc/ssl/private/mail.example.com.key
In the example above, a certificate valid for one year was created. The configuration file would look
like this:
pki mail.example.com cert "/etc/ssl/mail.example.com.crt"
pki mail.example.com key "/etc/ssl/private/mail.example.com.key"
table aliases file:/etc/aliases
listen on lo0
listen on egress tls pki mail.example.com auth
action mda_with_aliases mda "/path/to/mda -f -" alias <aliases>
action mda_without_aliases mda "/path/to/mda -f -"
action "outbound" relay
match for local action mda_with_aliases
match from any for domain example.com action mda_without_aliases
match for any action "outbound"
match auth from any for any action "outbound"
For sites that wish to sign messages using DKIM, the following example uses opensmtpd-filter-dkimsign for
DKIM signing:
table aliases file:/etc/aliases
filter "dkimsign" proc-exec "filter-dkimsign -d <domain> -s <selector> \
-k /etc/dkim/private.key" user _dkimsign group _dkimsign
listen on socket filter "dkimsign"
listen on lo0 filter "dkimsign"
action "local_mail" mbox alias <aliases>
action "outbound" relay
match for local action "local_mail"
match for any action "outbound"
Alternatively, the opensmtpd-filter-rspamd package may be used to provide integration with rspamd, a
third-party daemon which provides multiple antispam features as well as DKIM signing. As well as
configuring rspamd itself, it requires use of the proc-exec keyword:
filter "rspamd" proc-exec "filter-rspamd"
Sites that accept non-local messages may be able to cut down on the volume of spam received by rejecting
forged messages that claim to be from the local domain. The following example uses a list table
other-relays to specify the IP addresses of relays that may legitimately originate mail with the owner's
domain as the sender.
table aliases file:/etc/aliases
table other-relays file:/etc/other-relays
listen on lo0
listen on egress
action "local_mail" mbox alias <aliases>
action "outbound" relay
match for local action "local_mail"
match for any action "outbound"
match !from src <other-relays> mail-from "@example.com" for any \
reject
match from any for domain example.com action "local_mail"
SEE ALSO
mailer.conf(5), table(5), smtpd-filters(7), makemap(8), smtpd(8)
HISTORY
smtpd(8) first appeared in OpenBSD 4.6.
Debian July 26, 2024 SMTPD.CONF(5)