Provided by: fence-agents-ipmilan_4.16.0-2ubuntu1_all 
NAME
fence_ipmilan - Fence agent for IPMI
fence_ilo3 - Fence agent for HP iLO3 (symlink)
fence_ilo4 - Fence agent for HP iLO4 (symlink)
fence_ilo5 - Fence agent for HP iLO5 (symlink)
fence_ipmilanplus - Fence agent for IPMIv2 lanplus (symlink)
fence_imm - Fence agent for IBM Integrated Management Module (symlink)
fence_idrac - Fence agent for Dell iDRAC (symlink)
DESCRIPTION
fence_ilo5 is a Power Fencing agent which can be used with machines controlled by IPMI. This agent calls
support software ipmitool (http://ipmitool.sf.net/).
WARNING! This fence agent might report success before the node is powered off. You should use -m/method
onoff if your fence device works correctly with that option.
The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters
through stdin when it execs the agent. The agent can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL:
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-A, --auth=[auth]
IPMI Lan Auth type. (md5|password|none)
-C, --cipher=[cipher]
Ciphersuite to use (same as ipmitool -C parameter)
--hexadecimal-kg=[key]
Hexadecimal-encoded Kg key for IPMIv2 authentication
-a, --ip=[ip]
IP address or hostname of fencing device
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 623)
-P, --lanplus
Use Lanplus to improve security of connection (Default Value: 1)
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[ip]
IP address or hostname of fencing device (together with --port-as-ip)
-L, --privlvl=[level]
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value:
administrator)
--target=[targetaddress]
Bridge IPMI requests to the remote target address
-l, --username=[name]
Login name
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--ipmitool-path=[path]
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--port-as-ip
Make "port/plug" to be an alias to IP address
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 2)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--ipmitool-timeout=[timeout]
Timeout (sec) for IPMI operation (Default Value: 2)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--use-sudo
Use sudo (without password) when calling 3rd party software
--sudo-path=[path]
Path to sudo binary (Default Value: /usr/bin/sudo)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
diag Pulse a diagnostic interrupt to the processor(s).
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
auth IPMI Lan Auth type. (md5|password|none)
cipher Ciphersuite to use (same as ipmitool -C parameter)
hexadecimal_kg
Hexadecimal-encoded Kg key for IPMIv2 authentication
ip IP address or hostname of fencing device Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 623)
lanplus
Use Lanplus to improve security of connection (Default Value: 1)
method Method to fence (onoff|cycle) (Default Value: onoff)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port
privlvl
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value:
administrator)
target Bridge IPMI requests to the remote target address
username
Login name Obsoletes: login
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
ipmitool_path
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
port_as_ip
Make "port/plug" to be an alias to IP address
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 2)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
ipmitool_timeout
Timeout (sec) for IPMI operation (Default Value: 2)
retry_on
Count of attempts to retry power on (Default Value: 1)
use_sudo
Use sudo (without password) when calling 3rd party software Obsoletes: sudo
sudo_path
Path to sudo binary (Default Value: /usr/bin/sudo)
fence_ipmilan (Fence Agent) 2009-10-20 FENCE_AGENT(8)