NAME

       ModuleParrot.conf - Configuration file for the SvxLink server Parrot module

DESCRIPTION

       svxlink  is  a general purpose voice service system for ham radio use. This man-page describe the SvxLink
       server configuration for the Parrot module.

       The Parrot module record audio as long as the squelch is open and then plays it back. This can be used as
       a simplex repeater or for tests. It also plays back (spelling the digits) the DTMF digits it receives.

CONFIGURATION VARIABLES

       There are a couple of configuration variables that are common to  all  modules.   The  documentation  for
       these can be found in the svxlink.conf(5) manual page.

       Here  is  the  description  of all module specific configuration variables that the SvxLink Parrot module
       understands.

   ModuleParrot
       FIFO_LEN
              The length, in seconds, of the FIFO (First In First Out) audio buffer where audio is recorded  to.
              When  the squelch has been opened for longer than the time specified here, the oldest audio in the
              buffer will be thrown away.

       REPEAT_DELAY
              Specify a time, in milliseconds, that the parrot module  will  wait  after  squelch  close  before
              playing  back  the  recorded  message.  This is mostly a way to prevent the parrot module to start
              sending if the squlech momentarily closes on weak signals.

FILES

       /etc/svxlink/svxlink.conf (or deprecated /etc/svxlink.conf)
              The system wide configuration file.

       ~/.svxlink/svxlink.conf
              Per user configuration file.

       /etc/svxlink/svxlink.d/ModuleParrot.conf
              Global modularized configuration file. Depends on the CFG_DIR configuration variable setting.

       ~/.svxlink/svxlink.d/ModuleParrot.conf
              Per user modularized configuration file. Depends on the CFG_DIR configuration variable setting.

AUTHOR

       Tobias Blomberg (SM0SVX) <sm0svx at svxlink dot org>

REPORTING BUGS

       Bugs should be reported using the issue tracker at https://github.com/sm0svx/svxlink.

       Questions about SvxLink should not be asked using the issue tracker. Instead use the  group  set  up  for
       this purpose at groups.io: https://groups.io/g/svxlink

SEE ALSO

       svxlink.conf(5)

Linux                                              APRIL 2021                               MODULEPARROT.CONF(5)