Provided by: libmongodb-perl_2.2.2-2_all 
NAME
MongoDB::MongoClient - A connection to a MongoDB server or multi-server deployment
VERSION
version v2.2.2
SYNOPSIS
use MongoDB; # also loads MongoDB::MongoClient
# connect to localhost:27017
my $client = MongoDB::MongoClient->new;
# connect to specific host and port
my $client = MongoDB::MongoClient->new(
host => "mongodb://mongo.example.com:27017"
);
# connect to a replica set (set name *required*)
my $client = MongoDB::MongoClient->new(
host => "mongodb://mongo1.example.com,mongo2.example.com",
replica_set_name => 'myset',
);
# connect to a replica set with URI (set name *required*)
my $client = MongoDB::MongoClient->new(
host => "mongodb://mongo1.example.com,mongo2.example.com/?replicaSet=myset",
);
my $db = $client->get_database("test");
my $coll = $db->get_collection("people");
$coll->insert({ name => "John Doe", age => 42 });
my @people = $coll->find()->all();
DESCRIPTION
The "MongoDB::MongoClient" class represents a client connection to one or more MongoDB servers.
By default, it connects to a single server running on the local machine listening on the default port
27017:
# connects to localhost:27017
my $client = MongoDB::MongoClient->new;
It can connect to a database server running anywhere, though:
my $client = MongoDB::MongoClient->new(host => 'example.com:12345');
See the "host" attribute for more options for connecting to MongoDB.
MongoDB can be started in authentication mode <http://docs.mongodb.org/manual/core/authentication/>,
which requires clients to log in before manipulating data. By default, MongoDB does not start in this
mode, so no username or password is required to make a fully functional connection. To configure the
client for authentication, see the "AUTHENTICATION" section.
The actual socket connections are lazy and created on demand. When the client object goes out of scope,
all socket will be closed. Note that MongoDB::Database, MongoDB::Collection and related classes could
hold a reference to the client as well. Only when all references are out of scope will the sockets be
closed.
ATTRIBUTES
host
The "host" attribute specifies either a single server to connect to (as "hostname" or "hostname:port"),
or else a connection string URI with a seed list of one or more servers plus connection options.
NOTE: Options specified in the connection string take precedence over options provided as constructor
arguments.
Defaults to the connection string URI "mongodb://localhost:27017".
For IPv6 support, you must have a recent version of IO::Socket::IP installed. This module ships with the
Perl core since v5.20.0 and is available on CPAN for older Perls.
app_name
This attribute specifies an application name that should be associated with this client. The application
name will be communicated to the server as part of the initial connection handshake, and will appear in
connection-level and operation-level diagnostics on the server generated on behalf of this client. This
may be set in a connection string with the "appName" option.
The default is the empty string, which indicates a lack of an application name.
The application name must not exceed 128 bytes.
auth_mechanism
This attribute determines how the client authenticates with the server. Valid values are:
• NONE
• DEFAULT
• MONGODB-CR
• MONGODB-X509
• GSSAPI
• PLAIN
• SCRAM-SHA-1
If not specified, then if no username or "authSource" URI option is provided, it defaults to NONE.
Otherwise, it is set to DEFAULT, which chooses SCRAM-SHA-1 if available or MONGODB-CR otherwise.
This may be set in a connection string with the "authMechanism" option.
auth_mechanism_properties
This is an optional hash reference of authentication mechanism specific properties. See "AUTHENTICATION"
for details.
This may be set in a connection string with the "authMechanismProperties" option. If given, the value
must be key/value pairs joined with a ":". Multiple pairs must be separated by a comma. If ": or ","
appear in a key or value, they must be URL encoded.
bson_codec
An object that provides the "encode_one" and "decode_one" methods, such as from BSON. It may be
initialized with a hash reference that will be coerced into a new BSON object.
If not provided, a BSON object with default values will be generated.
compressors
An array reference of compression type names. Currently, "zlib", "zstd" and "snappy" are supported.
zlib_compression_level
An integer from "-1" to 9 specifying the compression level to use when "compression" is set to "zlib".
Note: When the special value "-1" is given, the default compression level will be used.
connect_timeout_ms
This attribute specifies the amount of time in milliseconds to wait for a new connection to a server.
The default is 10,000 ms.
If set to a negative value, connection operations will block indefinitely until the server replies or
until the operating system TCP/IP stack gives up (e.g. if the name can't resolve or there is no process
listening on the target host/port).
A zero value polls the socket during connection and is thus likely to fail except when talking to a local
process (and perhaps even then).
This may be set in a connection string with the "connectTimeoutMS" option.
db_name
Optional. If an "auth_mechanism" requires a database for authentication, this attribute will be used.
Otherwise, it will be ignored. Defaults to "admin".
This may be provided in the connection string URI as a path between the authority and option parameter
sections. For example, to authenticate against the "admin" database (showing a configuration option only
for illustration):
mongodb://localhost/admin?readPreference=primary
heartbeat_frequency_ms
The time in milliseconds (non-negative) between scans of all servers to check if they are up and update
their latency. Defaults to 60,000 ms.
This may be set in a connection string with the "heartbeatFrequencyMS" option.
j
If true, the client will block until write operations have been committed to the server's journal. Prior
to MongoDB 2.6, this option was ignored if the server was running without journaling. Starting with
MongoDB 2.6, write operations will fail if this option is used when the server is running without
journaling.
This may be set in a connection string with the "journal" option as the strings 'true' or 'false'.
local_threshold_ms
The width of the 'latency window': when choosing between multiple suitable servers for an operation, the
acceptable delta in milliseconds (non-negative) between shortest and longest average round-trip times.
Servers within the latency window are selected randomly.
Set this to "0" to always select the server with the shortest average round trip time. Set this to a
very high value to always randomly choose any known server.
Defaults to 15 ms.
See "SERVER SELECTION" for more details.
This may be set in a connection string with the "localThresholdMS" option.
max_staleness_seconds
The "max_staleness_seconds" parameter represents the maximum replication lag in seconds (wall clock time)
that a secondary can suffer and still be eligible for reads. The default is -1, which disables staleness
checks. Otherwise, it must be a positive integer.
Note: this will only be used for server versions 3.4 or greater, as that was when support for staleness
tracking was added.
If the read preference mode is 'primary', then "max_staleness_seconds" must not be supplied.
The "max_staleness_seconds" must be at least the "heartbeat_frequency_ms" plus 10 seconds (which is how
often the server makes idle writes to the oplog).
This may be set in a connection string with the "maxStalenessSeconds" option.
max_time_ms
Specifies the maximum amount of time in (non-negative) milliseconds that the server should use for
working on a database command. Defaults to 0, which disables this feature. Make sure this value is
shorter than "socket_timeout_ms".
Note: this will only be used for server versions 2.6 or greater, as that was when the $maxTimeMS meta-
operator was introduced.
You are strongly encouraged to set this variable if you know your environment has MongoDB 2.6 or later,
as getting a definitive error response from the server is vastly preferred over a getting a network
socket timeout.
This may be set in a connection string with the "maxTimeMS" option.
monitoring_callback
Specifies a code reference used to receive monitoring events. See MongoDB::Monitoring for more details.
password
If an "auth_mechanism" requires a password, this attribute will be used. Otherwise, it will be ignored.
This may be provided in the connection string URI as a "username:password" pair in the leading portion of
the authority section before a "@" character. For example, to authenticate as user "mulder" with
password "trustno1":
mongodb://mulder:trustno1@localhost
If the username or password have a ":" or "@" in it, they must be URL encoded. An empty password still
requires a ":" character.
port
If a network port is not specified as part of the "host" attribute, this attribute provides the port to
use. It defaults to 27107.
read_concern_level
The read concern level determines the consistency level required of data being read.
The default level is "undef", which means the server will use its configured default.
If the level is set to "local", reads will return the latest data a server has locally.
Additional levels are storage engine specific. See Read Concern
<http://docs.mongodb.org/manual/search/?query=readConcern> in the MongoDB documentation for more details.
This may be set in a connection string with the the "readConcernLevel" option.
read_pref_mode
The read preference mode determines which server types are candidates for a read operation. Valid values
are:
• primary
• primaryPreferred
• secondary
• secondaryPreferred
• nearest
For core documentation on read preference see <http://docs.mongodb.org/manual/core/read-preference/>.
This may be set in a connection string with the "readPreference" option.
read_pref_tag_sets
The "read_pref_tag_sets" parameter is an ordered list of tag sets used to restrict the eligibility of
servers, such as for data center awareness. It must be an array reference of hash references.
The application of "read_pref_tag_sets" varies depending on the "read_pref_mode" parameter. If the
"read_pref_mode" is 'primary', then "read_pref_tag_sets" must not be supplied.
For core documentation on read preference see <http://docs.mongodb.org/manual/core/read-preference/>.
This may be set in a connection string with the "readPreferenceTags" option. If given, the value must be
key/value pairs joined with a ":". Multiple pairs must be separated by a comma. If ": or "," appear in
a key or value, they must be URL encoded. The "readPreferenceTags" option may appear more than once, in
which case each document will be added to the tag set list.
replica_set_name
Specifies the replica set name to connect to. If this string is non-empty, then the topology is treated
as a replica set and all server replica set names must match this or they will be removed from the
topology.
This may be set in a connection string with the "replicaSet" option.
retry_reads
retry_writes
Whether the client should use retryable writes for supported commands. The default value is true, which
means that commands which support retryable writes will be retried on certain errors, such as "not
master" and "node is recovering" errors.
This may be set in a connection string with the "retryWrites" option.
Note that this is only supported on MongoDB > 3.6 in Replica Set or Shard Clusters, and will be ignored
on other deployments.
Unacknowledged write operations also do not support retryable writes, even when retry_writes has been
enabled.
The supported single statement write operations are currently as follows:
• "insert_one"
• "update_one"
• "replace_one"
• "delete_one"
• "find_one_and_delete"
• "find_one_and_replace"
• "find_one_and_update"
The supported multi statement write operations are as follows:
• "insert_many"
• "bulk_write"
The multi statement operations may be ether ordered or unordered. Note that for "bulk_write" operations,
the request may not include update_many or delete_many operations.
server_selection_timeout_ms
This attribute specifies the amount of time in milliseconds to wait for a suitable server to be available
for a read or write operation. If no server is available within this time period, an exception will be
thrown.
The default is 30,000 ms.
See "SERVER SELECTION" for more details.
This may be set in a connection string with the "serverSelectionTimeoutMS" option.
server_selection_try_once
This attribute controls whether the client will make only a single attempt to find a suitable server for
a read or write operation. The default is true.
When true, the client will not use the "server_selection_timeout_ms". Instead, if the topology
information is stale and needs to be checked or if no suitable server is available, the client will make
a single scan of all known servers to try to find a suitable one.
When false, the client will continually scan known servers until a suitable server is found or the
"serverSelectionTimeoutMS" is reached.
See "SERVER SELECTION" for more details.
This may be set in a connection string with the "serverSelectionTryOnce" option.
server_selector
Optional. This takes a function that augments the server selection rules. The function takes as a
parameter a list of server descriptions representing the suitable servers for the read or write
operation, and returns a list of server descriptions that should still be considered suitable. Most users
should rely on the default server selection algorithm and should not need to set this attribute.
socket_check_interval_ms
If a socket to a server has not been used in this many milliseconds, an "ismaster" command will be issued
to check the status of the server before issuing any reads or writes. Must be non-negative.
The default is 5,000 ms.
This may be set in a connection string with the "socketCheckIntervalMS" option.
socket_timeout_ms
This attribute specifies the amount of time in milliseconds to wait for a reply from the server before
issuing a network exception.
The default is 30,000 ms.
If set to a negative value, socket operations will block indefinitely until the server replies or until
the operating system TCP/IP stack gives up.
The driver automatically sets the TCP keepalive option when initializing the socket. For keepalive
related issues, check the MongoDB documentation for Does TCP keepalive time affect MongoDB Deployments?
<https://docs.mongodb.com/v3.2/faq/diagnostics/#does-tcp-keepalive-time-affect-mongodb-deployments>.
A zero value polls the socket for available data and is thus likely to fail except when talking to a
local process (and perhaps even then).
This may be set in a connection string with the "socketTimeoutMS" option.
ssl
ssl => 1
ssl => \%ssl_options
This tells the driver that you are connecting to an SSL mongodb instance.
You must have IO::Socket::SSL 1.42+ and Net::SSLeay 1.49+ installed for SSL support.
The "ssl" attribute takes either a boolean value or a hash reference of options to pass to
IO::Socket::SSL. For example, to set a CA file to validate the server certificate and set a client
certificate for the server to validate, you could set the attribute like this:
ssl => {
SSL_ca_file => "/path/to/ca.pem",
SSL_cert_file => "/path/to/client.pem",
}
If "SSL_ca_file" is not provided, server certificates are verified against a default list of CAs, either
Mozilla::CA or an operating-system-specific default CA file. To disable verification, you can use
"SSL_verify_mode => 0x00".
You are strongly encouraged to use your own CA file for increased security.
Server hostnames are also validated against the CN name in the server certificate using
"SSL_verifycn_scheme => 'http'". You can use the scheme 'none' to disable this check.
Disabling certificate or hostname verification is a security risk and is not recommended.
This may be set to the string 'true' or 'false' in a connection string with the "ssl" option, which will
enable ssl with default configuration. (See connection string URI for additional TLS configuration
options.)
username
Optional username for this client connection. If this field is set, the client will attempt to
authenticate when connecting to servers. Depending on the "auth_mechanism", the "password" field or
other attributes will need to be set for authentication to succeed.
This may be provided in the connection string URI as a "username:password" pair in the leading portion of
the authority section before a "@" character. For example, to authenticate as user "mulder" with
password "trustno1":
mongodb://mulder:trustno1@localhost
If the username or password have a ":" or "@" in it, they must be URL encoded. An empty password still
requires a ":" character.
w
The client write concern.
• 0 Unacknowledged. MongoClient will NOT wait for an acknowledgment that the server has received and
processed the request. Older documentation may refer to this as "fire-and-forget" mode. This option
is not recommended.
• 1 Acknowledged. MongoClient will wait until the primary MongoDB acknowledges the write.
• 2 Replica acknowledged. MongoClient will wait until at least two replicas (primary and one secondary)
acknowledge the write. You can set a higher number for more replicas.
• "all" All replicas acknowledged.
• "majority" A majority of replicas acknowledged.
If not set, the server default is used, which is typically "1".
In MongoDB v2.0+, you can "tag" replica members. With "tagging" you can specify a custom write concern
For more information see Data Center Awareness <http://docs.mongodb.org/manual/data-center-awareness/>
This may be set in a connection string with the "w" option.
wtimeout
The number of milliseconds an operation should wait for "w" secondaries to replicate it.
Defaults to 1000 (1 second). If you set this to undef, it could block indefinitely (or until socket
timeout is reached).
See "w" above for more information.
This may be set in a connection string with the "wTimeoutMS" option.
METHODS
read_preference
Returns a MongoDB::ReadPreference object constructed from "read_pref_mode" and "read_pref_tag_sets"
The use of "read_preference" as a mutator has been removed. Read preference is read-only. If you need a
different read preference for a database or collection, you can specify that in "get_database" or
"get_collection".
write_concern
Returns a MongoDB::WriteConcern object constructed from "w", "write_concern" and "j".
read_concern
Returns a MongoDB::ReadConcern object constructed from "read_concern_level".
topology_type
Returns an enumerated topology type. If the "replica_set_name" is set, the value will be either
'ReplicaSetWithPrimary' or 'ReplicaSetNoPrimary' (if the primary is down or not yet discovered). Without
"replica_set_name", if there is more than one server in the list of hosts, the type will be 'Sharded'.
With only a single host and no replica set name, the topology type will start as 'Direct' until the
server is contacted the first time, after which the type will be 'Sharded' for a mongos or 'Single' for
standalone server or direct connection to a replica set member.
connect
$client->connect;
Calling this method is unnecessary, as connections are established automatically as needed. It is kept
for backwards compatibility. Calling it will check all servers in the deployment which ensures a
connection to any that are available.
See "reconnect" for a method that is useful when using forks or threads.
disconnect
$client->disconnect;
Drops all connections to servers.
reconnect
$client->reconnect;
This method closes all connections to the server, as if "disconnect" were called, and then immediately
reconnects. It also clears the session cache. Use this after forking or spawning off a new thread.
topology_status
$client->topology_status;
$client->topology_status( refresh => 1 );
Returns a hash reference with server topology information like this:
{
'topology_type' => 'ReplicaSetWithPrimary'
'replica_set_name' => 'foo',
'last_scan_time' => '1433766895.183241',
'servers' => [
{
'address' => 'localhost:50003',
'ewma_rtt_ms' => '0.223462326',
'type' => 'RSSecondary'
},
{
'address' => 'localhost:50437',
'ewma_rtt_ms' => '0.268435456',
'type' => 'RSArbiter'
},
{
'address' => 'localhost:50829',
'ewma_rtt_ms' => '0.737782272',
'type' => 'RSPrimary'
}
},
}
If the 'refresh' argument is true, then the topology will be scanned to update server data before
returning the hash reference.
start_session
$client->start_session;
$client->start_session( $options );
Returns a new MongoDB::ClientSession with the supplied options.
will throw a "MongoDB::ConfigurationError" if sessions are not supported by the connected MongoDB
deployment.
the options hash is an optional hash which can have the following keys:
• "causalConsistency" - Enable Causally Consistent reads for this session. Defaults to true.
for more information see "options" in MongoDB::ClientSession.
list_databases
# get all information on all databases
my @dbs = $client->list_databases;
# get only the foo databases
my @foo_dbs = $client->list_databases({ filter => { name => qr/^foo/ } });
Lists all databases with information on each database. Supports filtering by any of the output fields
under the "filter" argument, such as:
• "name"
• "sizeOnDisk"
• "empty"
• "shards"
database_names
my @dbs = $client->database_names;
# get only the foo database names
my @foo_dbs = $client->database_names({ filter => { name => qr/^foo/ } });
List of all database names on the MongoDB server. Supports filters in the same way as "list_databases".
get_database, db
my $database = $client->get_database('foo');
my $database = $client->get_database('foo', $options);
my $database = $client->db('foo', $options);
Returns a MongoDB::Database instance for the database with the given $name.
It takes an optional hash reference of options that are passed to the MongoDB::Database constructor.
The "db" method is an alias for "get_database".
get_namespace, ns
my $collection = $client->get_namespace('test.foo');
my $collection = $client->get_namespace('test.foo', $options);
my $collection = $client->ns('test.foo', $options);
Returns a MongoDB::Collection instance for the given namespace. The namespace has both the database name
and the collection name separated with a dot character.
This is a quick way to get a collection object if you don't need the database object separately.
It takes an optional hash reference of options that are passed to the MongoDB::Collection constructor.
The intermediate MongoDB::Database object will be created with default options.
The "ns" method is an alias for "get_namespace".
fsync(\%args)
$client->fsync();
A function that will forces the server to flush all pending writes to the storage layer.
The fsync operation is synchronous by default, to run fsync asynchronously, use the following form:
$client->fsync({async => 1});
The primary use of fsync is to lock the database during backup operations. This will flush all data to
the data storage layer and block all write operations until you unlock the database. Note: you can still
read while the database is locked.
$conn->fsync({lock => 1});
fsync_unlock
$conn->fsync_unlock();
Unlocks a database server to allow writes and reverses the operation of a $conn->fsync({lock => 1});
operation.
watch
Watches for changes on the cluster.
Perform an aggregation with an implicit initial $changeStream stage and returns a MongoDB::ChangeStream
result which can be used to iterate over the changes in the cluster. This functionality is available
since MongoDB 4.0.
my $stream = $client->watch();
my $stream = $client->watch( \@pipeline );
my $stream = $client->watch( \@pipeline, \%options );
while (1) {
# This inner loop will only run until no more changes are
# available.
while (my $change = $stream->next) {
# process $change
}
}
The returned stream will not block forever waiting for changes. If you want to respond to changes over a
longer time use "maxAwaitTimeMS" and regularly call "next" in a loop.
See "watch" in MongoDB::Collection for details on usage and available options.
DEPLOYMENT TOPOLOGY
MongoDB can operate as a single server or as a distributed system. One or more servers that collectively
provide access to a single logical set of MongoDB databases are referred to as a "deployment".
There are three types of deployments:
• Single server – a stand-alone mongod database
• Replica set – a set of mongod databases with data replication and fail-over capability
• Sharded cluster – a distributed deployment that spreads data across one or more shards, each of which
can be a replica set. Clients communicate with a mongos process that routes operations to the
correct share.
The state of a deployment, including its type, which servers are members, the server types of members and
the round-trip network latency to members is referred to as the "topology" of the deployment.
To the greatest extent possible, the MongoDB driver abstracts away the details of communicating with
different deployment types. It determines the deployment topology through a combination of the
connection string, configuration options and direct discovery communicating with servers in the
deployment.
CONNECTION STRING URI
MongoDB uses a pseudo-URI connection string to specify one or more servers to connect to, along with
configuration options.
NOTE: any non-printable ASCII characters should be UTF-8 encoded and converted URL-escaped characters.
To connect to more than one database server, provide host or host:port pairs as a comma separated list:
mongodb://host1[:port1][,host2[:port2],...[,hostN[:portN]]]
This list is referred to as the "seed list". An arbitrary number of hosts can be specified. If a port
is not specified for a given host, it will default to 27017.
If multiple hosts are given in the seed list or discovered by talking to servers in the seed list, they
must all be replica set members or must all be mongos servers for a sharded cluster.
A replica set MUST have the "replicaSet" option set to the replica set name.
If there is only single host in the seed list and "replicaSet" is not provided, the deployment is treated
as a single server deployment and all reads and writes will be sent to that host.
Providing a replica set member as a single host without the set name is the way to get a "direct
connection" for carrying out administrative activities on that server.
The connection string may also have a username and password:
mongodb://username:password@host1:port1,host2:port2
The username and password must be URL-escaped.
A optional database name for authentication may be given:
mongodb://username:password@host1:port1,host2:port2/my_database
Finally, connection string options may be given as URI attribute pairs in a query string:
mongodb://host1:port1,host2:port2/?ssl=1&wtimeoutMS=1000
mongodb://username:password@host1:port1,host2:port2/my_database?ssl=1&wtimeoutMS=1000
The currently supported connection string options are:
• "appName"
• "authMechanism"
• "authMechanismProperties"
• "authSource"
• "compressors"
• "connect"
• "connectTimeoutMS"
• "heartbeatFrequencyMS"
• "journal"
• "localThresholdMS"
• "maxStalenessSeconds"
• "maxTimeMS"
• "readConcernLevel"
• "readPreference"
• "readPreferenceTags"
• "replicaSet"
• "retryReads"
• "retryWrites"
• "serverSelectionTimeoutMS"
• "serverSelectionTryOnce"
• "socketCheckIntervalMS"
• "socketTimeoutMS"
• "ssl"
• "tls" (an alias for "ssl")
• "tlsAllowInvalidCertificates"
• "tlsAllowInvalidHostnames"
• "tlsCAFile"
• "tlsCertificateKeyFile"
• "tlsCertificateKeyFilePassword"
• "tlsInsecure"
• "w"
• "wTimeoutMS"
• "zlibCompressionLevel"
NOTE: Options specified in the connection string take precedence over options provided as constructor
arguments.
See the official MongoDB documentation on connection strings for more on the URI format and connection
string options: <http://docs.mongodb.org/manual/reference/connection-string/>.
SERVER SELECTION
For a single server deployment or a direct connection to a mongod or mongos, all reads and writes are
sent to that server. Any read-preference is ignored.
When connected to a deployment with multiple servers, such as a replica set or sharded cluster, the
driver chooses a server for operations based on the type of operation (read or write), application-
provided server selector, the types of servers available and a read preference.
For a replica set deployment, writes are sent to the primary (if available) and reads are sent to a
server based on the "read_preference" attribute, which defaults to sending reads to the primary. See
MongoDB::ReadPreference for more.
For a sharded cluster reads and writes are distributed across mongos servers in the seed list. Any read
preference is passed through to the mongos and used by it when executing reads against shards.
If multiple servers can service an operation (e.g. multiple mongos servers, or multiple replica set
members), one is chosen by filtering with server selector and then at random from within the "latency
window". The server with the shortest average round-trip time (RTT) is always in the window. Any
servers with an average round-trip time less than or equal to the shortest RTT plus the
"local_threshold_ms" are also in the latency window.
If a suitable server is not immediately available, what happens next depends on the
"server_selection_try_once" option.
If that option is true, a single topology scan will be performed. Afterwards if a suitable server is
available, it will be returned; otherwise, an exception is thrown.
If that option is false, the driver will do topology scans repeatedly looking for a suitable server.
When more than "server_selection_timeout_ms" milliseconds have elapsed since the start of server
selection without a suitable server being found, an exception is thrown.
Note: the actual maximum wait time for server selection could be as long "server_selection_timeout_ms"
plus the amount of time required to do a topology scan.
SERVER MONITORING AND FAILOVER
When the client first needs to find a server for a database operation, all servers from the "host"
attribute are scanned to determine which servers to monitor. If the deployment is a replica set,
additional hosts may be discovered in this process. Invalid hosts are dropped.
After the initial scan, whenever the servers have not been checked in "heartbeat_frequency_ms"
milliseconds, the scan will be repeated. This amortizes monitoring time over many of operations.
Additionally, if a socket has been idle for a while, it will be checked before being used for an
operation.
If a server operation fails because of a "not master" or "node is recovering" error, or if there is a
network error or timeout, then the server is flagged as unavailable and exception will be thrown. See
MongoDB::Errors for exception types.
If the error is caught and handled, the next operation will rescan all servers immediately to update its
view of the topology. The driver can continue to function as long as servers are suitable per "SERVER
SELECTION".
When catching an exception, users must determine whether or not their application should retry an
operation based on the specific operation attempted and other use-case-specific considerations. For
automating retries despite exceptions, consider using the Try::Tiny::Retry module.
TRANSPORT LAYER SECURITY
Warning: industry best practices, and some regulations, require the use of TLS 1.1 or newer.
Some operating systems or versions may not provide an OpenSSL version new enough to support the latest
TLS protocols. If your OpenSSL library version number is less than 1.0.1, then support for TLS 1.1 or
newer is not available. Contact your operating system vendor for a solution or upgrade to a newer
operating system distribution.
See also the documentation for Net::SSLeay for details on installing and compiling against OpenSSL.
TLS connections in the driver rely on the default settings provided by IO::Socket::SSL, but allow you to
pass custom configuration to it. Please read its documentation carefully to see how to control your TLS
configuration.
AUTHENTICATION
The MongoDB server provides several authentication mechanisms, though some are only available in the
Enterprise edition.
MongoDB client authentication is controlled via the "auth_mechanism" attribute, which takes one of the
following values:
NOTE: MONGODB-CR was deprecated with the release of MongoDB 3.6 and is no longer supported by MongoDB
4.0.
• MONGODB-CR -- legacy username-password challenge-response (< 4.0)
• SCRAM-SHA-1 -- secure username-password challenge-response (3.0+)
• MONGODB-X509 -- SSL client certificate authentication (2.6+)
• PLAIN -- LDAP authentication via SASL PLAIN (Enterprise only)
• GSSAPI -- Kerberos authentication (Enterprise only)
The mechanism to use depends on the authentication configuration of the server. See the core
documentation on authentication: <http://docs.mongodb.org/manual/core/access-control/>.
Usage information for each mechanism is given below.
MONGODB-CR and SCRAM-SHA-1 (for username/password)
These mechanisms require a username and password, given either as constructor attributes or in the "host"
connection string.
If a username is provided and an authentication mechanism is not specified, the client will use
SCRAM-SHA-1 for version 3.0 or later servers and will fall back to MONGODB-CR for older servers.
my $mc = MongoDB::MongoClient->new(
host => "mongodb://mongo.example.com/",
username => "johndoe",
password => "trustno1",
);
my $mc = MongoDB::MongoClient->new(
host => "mongodb://johndoe:trustno1@mongo.example.com/",
);
Usernames and passwords will be UTF-8 encoded before use. The password is never sent over the wire --
only a secure digest is used. The SCRAM-SHA-1 mechanism is the Salted Challenge Response Authentication
Mechanism defined in RFC 5802 <http://tools.ietf.org/html/rfc5802>.
The default database for authentication is 'admin'. If another database name should be used, specify it
with the "db_name" attribute or via the connection string.
db_name => auth_db
mongodb://johndoe:trustno1@mongo.example.com/auth_db
MONGODB-X509 (for SSL client certificate)
X509 authentication requires SSL support (IO::Socket::SSL), requires that a client certificate be
configured in the ssl parameters, and requires specifying the "MONGODB-X509" authentication mechanism.
my $mc = MongoDB::MongoClient->new(
host => "mongodb://sslmongo.example.com/",
ssl => {
SSL_ca_file => "certs/ca.pem",
SSL_cert_file => "certs/client.pem",
},
auth_mechanism => "MONGODB-X509",
);
Note: Since MongoDB Perl driver v1.8.0, you no longer need to specify a "username" parameter for X509
authentication; the username will be extracted automatically from the certificate.
PLAIN (for LDAP)
This mechanism requires a username and password, which will be UTF-8 encoded before use. The
"auth_mechanism" parameter must be given as a constructor attribute or in the "host" connection string:
my $mc = MongoDB::MongoClient->new(
host => "mongodb://mongo.example.com/",
username => "johndoe",
password => "trustno1",
auth_mechanism => "PLAIN",
);
my $mc = MongoDB::MongoClient->new(
host => "mongodb://johndoe:trustno1@mongo.example.com/authMechanism=PLAIN",
);
GSSAPI (for Kerberos)
Kerberos authentication requires the CPAN module Authen::SASL and a GSSAPI-capable backend.
On Debian systems, Authen::SASL may be available as "libauthen-sasl-perl"; on RHEL systems, it may be
available as "perl-Authen-SASL".
The Authen::SASL::Perl backend comes with Authen::SASL and requires the GSSAPI CPAN module for GSSAPI
support. On Debian systems, this may be available as "libgssapi-perl"; on RHEL systems, it may be
available as "perl-GSSAPI".
Installing the GSSAPI module from CPAN rather than an OS package requires "libkrb5" and the "krb5-config"
utility (available for Debian/RHEL systems in the "libkrb5-dev" package).
Alternatively, the Authen::SASL::XS or Authen::SASL::Cyrus modules may be used. Both rely on Cyrus
"libsasl". Authen::SASL::XS is preferred, but not yet available as an OS package. Authen::SASL::Cyrus
is available on Debian as "libauthen-sasl-cyrus-perl" and on RHEL as "perl-Authen-SASL-Cyrus".
Installing Authen::SASL::XS or Authen::SASL::Cyrus from CPAN requires "libsasl". On Debian systems, it
is available from "libsasl2-dev"; on RHEL, it is available in "cyrus-sasl-devel".
To use the GSSAPI mechanism, first run "kinit" to authenticate with the ticket granting service:
$ kinit johndoe@EXAMPLE.COM
Configure MongoDB::MongoClient with the principal name as the "username" parameter and specify 'GSSAPI'
as the "auth_mechanism":
my $mc = MongoDB::MongoClient->new(
host => 'mongodb://mongo.example.com',
username => 'johndoe@EXAMPLE.COM',
auth_mechanism => 'GSSAPI',
);
Both can be specified in the "host" connection string, keeping in mind that the '@' in the principal name
must be encoded as "%40":
my $mc = MongoDB::MongoClient->new(
host =>
'mongodb://johndoe%40EXAMPLE.COM@mongo.example.com/?authMechanism=GSSAPI',
);
The default service name is 'mongodb'. It can be changed with the "auth_mechanism_properties" attribute
or in the connection string.
auth_mechanism_properties => { SERVICE_NAME => 'other_service' }
mongodb://.../?authMechanism=GSSAPI&authMechanismProperties=SERVICE_NAME:other_service
THREAD-SAFETY AND FORK-SAFETY
You MUST call the "reconnect" method on any MongoDB::MongoClient objects after forking or spawning a
thread.
NOTE: Per threads documentation, use of Perl threads is discouraged by the maintainers of Perl and the
MongoDB Perl driver does not test or provide support for use with threads.
AUTHORS
• David Golden <david@mongodb.com>
• Rassi <rassi@mongodb.com>
• Mike Friedman <friedo@friedo.com>
• Kristina Chodorow <k.chodorow@gmail.com>
• Florian Ragwitz <rafl@debian.org>
COPYRIGHT AND LICENSE
This software is Copyright (c) 2020 by MongoDB, Inc.
This is free software, licensed under:
The Apache License, Version 2.0, January 2004
perl v5.34.0 2022-06-30 MongoDB::MongoClient(3pm)