Provided by: zabbix-sender_7.0.10+dfsg-2_amd64 
NAME
zabbix_sender - Zabbix sender utility
SYNOPSIS
zabbix_sender [-v] -z server [-p port] [-I IP-address] [-t timeout] -s host -k key -o value
zabbix_sender [-v] -z server [-p port] [-I IP-address] [-t timeout] [-s host] [-T] [-N] [-r] -i
input-file
zabbix_sender [-v] -c config-file [-z server] [-p port] [-I IP-address] [-t timeout] [-s host] -k key -o
value
zabbix_sender [-v] -c config-file [-z server] [-p port] [-I IP-address] [-t timeout] [-s host] [-T] [-N]
[-r] -i input-file
zabbix_sender [-v] -z server [-p port] [-I IP-address] [-t timeout] -s host --tls-connect cert
--tls-ca-file CA-file [--tls-crl-file CRL-file] [--tls-server-cert-issuer cert-issuer]
[--tls-server-cert-subject cert-subject] --tls-cert-file cert-file --tls-key-file key-file
[--tls-cipher13 cipher-string] [--tls-cipher cipher-string] -k key -o value
zabbix_sender [-v] -z server [-p port] [-I IP-address] [-t timeout] [-s host] --tls-connect cert
--tls-ca-file CA-file [--tls-crl-file CRL-file] [--tls-server-cert-issuer cert-issuer]
[--tls-server-cert-subject cert-subject] --tls-cert-file cert-file --tls-key-file key-file
[--tls-cipher13 cipher-string] [--tls-cipher cipher-string] [-T] [-N] [-r] -i input-file
zabbix_sender [-v] -c config-file [-z server] [-p port] [-I IP-address] [-t timeout] [-s host]
--tls-connect cert --tls-ca-file CA-file [--tls-crl-file CRL-file] [--tls-server-cert-issuer cert-issuer]
[--tls-server-cert-subject cert-subject] --tls-cert-file cert-file --tls-key-file key-file
[--tls-cipher13 cipher-string] [--tls-cipher cipher-string] -k key -o value
zabbix_sender [-v] -c config-file [-z server] [-p port] [-I IP-address] [-t timeout] [-s host]
--tls-connect cert --tls-ca-file CA-file [--tls-crl-file CRL-file] [--tls-server-cert-issuer cert-issuer]
[--tls-server-cert-subject cert-subject] --tls-cert-file cert-file --tls-key-file key-file
[--tls-cipher13 cipher-string] [--tls-cipher cipher-string] [-T] [-N] [-r] -i input-file
zabbix_sender [-v] -z server [-p port] [-I IP-address] [-t timeout] -s host --tls-connect psk
--tls-psk-identity PSK-identity --tls-psk-file PSK-file [--tls-cipher13 cipher-string] [--tls-cipher
cipher-string] -k key -o value
zabbix_sender [-v] -z server [-p port] [-I IP-address] [-t timeout] [-s host] --tls-connect psk
--tls-psk-identity PSK-identity --tls-psk-file PSK-file [--tls-cipher13 cipher-string] [--tls-cipher
cipher-string] [-T] [-N] [-r] -i input-file
zabbix_sender [-v] -c config-file [-z server] [-p port] [-I IP-address] [-t timeout] [-s host]
--tls-connect psk --tls-psk-identity PSK-identity --tls-psk-file PSK-file [--tls-cipher13 cipher-string]
[--tls-cipher cipher-string] -k key -o value
zabbix_sender [-v] -c config-file [-z server] [-p port] [-I IP-address] [-t timeout] [-s host]
--tls-connect psk --tls-psk-identity PSK-identity --tls-psk-file PSK-file [--tls-cipher13 cipher-string]
[--tls-cipher cipher-string] [-T] [-N] [-r] -i input-file
zabbix_sender -h
zabbix_sender -V
DESCRIPTION
zabbix_sender is a command line utility for sending monitoring data to Zabbix server or proxy. On the
Zabbix server an item of type Zabbix trapper should be created with corresponding key. Note that
incoming values will only be accepted from hosts specified in Allowed hosts field for this item.
OPTIONS
-c, --config config-file
Use config-file. Zabbix sender reads server details from the agentd configuration file. By
default Zabbix sender does not read any configuration file. Only parameters Hostname,
ServerActive, SourceIP, TLSConnect, TLSCAFile, TLSCRLFile, TLSServerCertIssuer,
TLSServerCertSubject, TLSCertFile, TLSKeyFile, TLSPSKIdentity and TLSPSKFile are supported.
Hostname defined through HostnameItem parameter will not be picked up, in this case the hostname
should be specified via command line (see -s option). All addresses defined in the agent
ServerActive configuration parameter are used for sending data. If sending of batch data fails to
one address, the following batches are not sent to this address.
-z, --zabbix-server server
Hostname or IP address of Zabbix server. If a host is monitored by a proxy, proxy hostname or IP
address should be used instead. When used together with --config, overrides the entries of
ServerActive parameter specified in agentd configuration file.
-p, --port port
Specify port number of Zabbix server trapper running on the server. Default is 10051. When used
together with --config, overrides the port entries of ServerActive parameter specified in agentd
configuration file.
-I, --source-address IP-address
Specify source IP address. When used together with --config, overrides SourceIP parameter
specified in agentd configuration file.
-t, --timeout seconds
Specify timeout. Valid range: 1-300 seconds (default: 60)
-s, --host host
Specify host name the item belongs to (as registered in Zabbix frontend). Host IP address and DNS
name will not work. When used together with --config, overrides Hostname parameter specified in
agentd configuration file.
-k, --key key
Specify item key to send value to.
-o, --value value
Specify item value.
-i, --input-file input-file
Load values from input file. Specify - as <input-file> to read values from standard input. Each
line of file contains whitespace delimited: <hostname> <key> <value>. Each value must be
specified on its own line. Each line must contain 3 whitespace delimited entries: <hostname>
<key> <value>, where "hostname" is the name of monitored host as registered in Zabbix frontend,
"key" is target item key and "value" - the value to send. Specify - as <hostname> to use hostname
from agent configuration file or from --host argument.
An example of a line of an input file:
"Linux DB3" db.connections 43
The value type must be correctly set in item configuration of Zabbix frontend. Zabbix sender will
send up to 250 values in one connection. Contents of the input file must be in the UTF-8
encoding. All values from the input file are sent in a sequential order top-down. Entries must
be formatted using the following rules:
• Quoted and non-quoted entries are supported.
• Double-quote is the quoting character.
• Entries with whitespace must be quoted.
• Double-quote and backslash characters inside quoted entry must be escaped with a
backslash.
• Escaping is not supported in non-quoted entries.
• Linefeed escape sequences (\n) are supported in quoted strings.
• Linefeed escape sequences are trimmed from the end of an entry.
-T, --with-timestamps
This option can be only used with --input-file option.
Each line of the input file must contain 4 whitespace delimited entries: <hostname> <key>
<timestamp> <value>. Timestamp should be specified in Unix timestamp format. If target item has
triggers referencing it, all timestamps must be in an increasing order, otherwise event
calculation will not be correct.
An example of a line of the input file:
"Linux DB3" db.connections 1429533600 43
For more details please see option --input-file.
If a timestamped value is sent for a host that is in a “no data” maintenance type then this value
will be dropped; however, it is possible to send a timestamped value in for an expired maintenance
period and it will be accepted.
-N, --with-ns
This option can be only used with --with-timestamps option.
Each line of the input file must contain 5 whitespace delimited entries: <hostname> <key>
<timestamp> <ns> <value>.
An example of a line of the input file:
"Linux DB3" db.connections 1429533600 7402561 43
For more details please see option --input-file.
-r, --real-time
Send values one by one as soon as they are received. This can be used when reading from standard
input.
--tls-connect value
How to connect to server or proxy. Values:
unencrypted
connect without encryption (default)
psk connect using TLS and a pre-shared key
cert connect using TLS and a certificate
--tls-ca-file CA-file
Full pathname of a file containing the top-level CA(s) certificates for peer certificate
verification.
--tls-crl-file CRL-file
Full pathname of a file containing revoked certificates.
--tls-server-cert-issuer cert-issuer
Allowed server certificate issuer.
--tls-server-cert-subject cert-subject
Allowed server certificate subject.
--tls-cert-file cert-file
Full pathname of a file containing the certificate or certificate chain.
--tls-key-file key-file
Full pathname of a file containing the private key.
--tls-psk-identity PSK-identity
PSK-identity string.
--tls-psk-file PSK-file
Full pathname of a file containing the pre-shared key.
--tls-cipher13 cipher-string
Cipher string for OpenSSL 1.1.1 or newer for TLS 1.3. Override the default ciphersuite selection
criteria. This option is not available if OpenSSL version is less than 1.1.1.
--tls-cipher cipher-string
GnuTLS priority string (for TLS 1.2 and up) or OpenSSL cipher string (only for TLS 1.2). Override
the default ciphersuite selection criteria.
-v, --verbose
Verbose mode, -vv for more details.
-h, --help
Display this help and exit.
-V, --version
Output version information and exit.
EXIT STATUS
The exit status is 0 if the values were sent and all of them were successfully processed by server. If
data was sent, but processing of at least one of the values failed, the exit status is 2. If data
sending failed, the exit status is 1.
EXAMPLES
zabbix_sender -c /etc/zabbix/zabbix_agentd.conf -k mysql.queries -o 342.45
Send 342.45 as the value for mysql.queries item of monitored host. Use monitored host and Zabbix
server defined in agent configuration file.
zabbix_sender -c /etc/zabbix/zabbix_agentd.conf -s "Monitored Host" -k mysql.queries -o 342.45
Send 342.45 as the value for mysql.queries item of Monitored Host host using Zabbix server defined
in agent configuration file.
zabbix_sender -z 192.168.1.113 -i data_values.txt
Send values from file data_values.txt to Zabbix server with IP 192.168.1.113. Host names and keys
are defined in the file.
echo "- hw.serial.number 1287872261 SQ4321ASDF" | zabbix_sender -c /etc/zabbix_agentd.conf -T -i -
Send a timestamped value from the commandline to Zabbix server, specified in the agent
configuration file. Dash in the input data indicates that hostname also should be used from the
same configuration file.
echo '"Zabbix server" trapper.item ""' | zabbix_sender -z 192.168.1.113 -p 10000 -i -
Send empty value of an item to the Zabbix server with IP address 192.168.1.113 on port 10000 from
the commandline. Empty values must be indicated by empty double quotes.
zabbix_sender -z 192.168.1.113 -s "Monitored Host" -k mysql.queries -o 342.45 --tls-connect cert
--tls-ca-file /home/zabbix/zabbix_ca_file --tls-cert-file /home/zabbix/zabbix_agentd.crt --tls-key-file
/home/zabbix/zabbix_agentd.key
Send 342.45 as the value for mysql.queries item in Monitored Host host to server with IP
192.168.1.113 using TLS with certificate.
zabbix_sender -z 192.168.1.113 -s "Monitored Host" -k mysql.queries -o 342.45 --tls-connect psk
--tls-psk-identity "PSK ID Zabbix agentd" --tls-psk-file /home/zabbix/zabbix_agentd.psk
Send 342.45 as the value for mysql.queries item in Monitored Host host to server with IP
192.168.1.113 using TLS with pre-shared key (PSK).
SEE ALSO
Documentation
zabbix_agentd(8), zabbix_get(1), zabbix_proxy(8), zabbix_server(8), zabbix_js(1), zabbix_agent2(8),
zabbix_web_service(8)
Zabbix 2022-01-06 ZABBIX_SENDER(1)