Provided by: openmpi-bin_5.0.7-1_amd64 
NOTE:
mpirun and mpiexec are synonyms for each other. Indeed, they are symbolic links to the same
executable. Using either of the names will produce the exact same behavior.
SYNOPSIS
Single Process Multiple Data (SPMD) Model:
mpirun [ options ] <program> [ <args> ]
Multiple Instruction Multiple Data (MIMD) Model:
mpirun [ global_options ]
[ local_options1 ] <program1> [ <args1> ] :
[ local_options2 ] <program2> [ <args2> ] :
... :
[ local_optionsN ] <programN> [ <argsN> ]
Note that in both models, invoking mpirun via an absolute path name is equivalent to specifying the
--prefix option with a <dir> value equivalent to the directory where mpirun resides, minus its last
subdirectory. For example:
shell$ /usr/local/bin/mpirun ...
is equivalent to
shell$ mpirun --prefix /usr/local
QUICK SUMMARY
If you are simply looking for how to run an MPI application, you probably want to use a command line of
the following form:
shell$ mpirun [ -n X ] [ --hostfile <filename> ] <program>
This will run X copies of <program> in your current run-time environment (if running under a supported
resource manager, Open MPI’s mpirun will usually automatically use the corresponding resource manager
process starter, as opposed to ssh (for example), which require the use of a hostfile, or will default to
running all X copies on the localhost), scheduling (by default) in a round-robin fashion by CPU slot.
See the rest of this documentation for more details.
Please note that mpirun automatically binds processes to hardware resources. Three binding patterns are
used in the absence of any further directives (See map/rank/bind defaults for more details):
• Bind to core: when the number of processes is <= 2
• Bind to package: when the number of processes is > 2
• Bind to none: when oversubscribed
If your application uses threads, then you probably want to ensure that you are either not bound at all
(by specifying --bind-to none), or bound to multiple cores using an appropriate binding level or specific
number of processing elements per application process.
OPEN MPI’S USE OF PRRTE
Open MPI uses the PMIx Reference Runtime Environment (PRRTE) as the main engine for launching,
monitoring, and terminating MPI processes.
Much of the documentation below is directly imported from PRRTE. As such, it frequently refers to PRRTE
concepts and command line options. Except where noted, these concepts and command line argument are all
applicable to Open MPI as well. Open MPI extends the available PRRTE command line options, and also
slightly modifies the PRRTE’s default behaviors in a few cases. These will be specifically described in
the docuemtnation below.
COMMAND LINE OPTIONS
The core of Open MPI’s mpirun processing is performed via the PRRTE. Specifically: mpirun is effectively
a wrapper around prterun, but mpirun’s CLI options are slightly different than PRRTE’s CLI commands.
No content
There is no meaningful content in this file because Open MPI was either:
• Built without PRRTE support.
• Built with a PRRTE that was too old to include machine-readable documentation that could be
incorporated into Open MPI’s documentation.
If you build Open MPI with a newer version of PRRTE (and have the Sphinx tool available when you run Open
MPI’s configure command), you should get more meaningful documentation here.
Hence, there is no documentation for this section.
Sorry!
OPTIONS (OLD / HARD-CODED CONTENT — TO BE AUDITED
This is old content
This is the old section of manually hard-coded content. It should probably be read / audited
and see what we want to keep and what we want to discard.
Feel free to refer to https://docs.prrte.org/ rather than replicating content here (e.g., for
the definition of a slot and other things).
mpirun will send the name of the directory where it was invoked on the local node to each of the remote
nodes, and attempt to change to that directory. See the “Current Working Directory” section below for
further details.
• <program>: The program executable. This is identified as the first non-recognized argument to mpirun.
• <args>: Pass these run-time arguments to every new process. These must always be the last arguments to
mpirun. If an app context file is used, <args> will be ignored.
• -h, --help: Display help for this command
• -q, --quiet: Suppress informative messages from orterun during application execution.
• -v, --verbose:` Be verbose
• -V, --version: Print version number. If no other arguments are given, this will also cause orterun to
exit.
• -N <num>: Launch num processes per node on all allocated nodes (synonym for --npernode).
• --display-map: Display a table showing the mapped location of each process prior to launch.
• --display-allocation: Display the detected resource allocation.
• --output-proctable: Output the debugger proctable after launch.
• --dvm: Create a persistent distributed virtual machine (DVM).
• --max-vm-size <size>: Number of daemons to start.
Use one of the following options to specify which hosts (nodes) of the cluster to run on. Note that as of
the start of the v1.8 release, mpirun will launch a daemon onto each host in the allocation (as modified
by the following options) at the very beginning of execution, regardless of whether or not application
processes will eventually be mapped to execute there. This is done to allow collection of hardware
topology information from the remote nodes, thus allowing us to map processes against known topology.
However, it is a change from the behavior in prior releases where daemons were only launched after
mapping was complete, and thus only occurred on nodes where application processes would actually be
executing.
• -H, --host <host1,host2,...,hostN>: list of hosts on which to invoke processes.
• --hostfile <hostfile>: Provide a hostfile to use.
• --default-hostfile <hostfile>: Provide a default hostfile.
• --machinefile <machinefile>: Synonym for --hostfile.
• --cpu-set <list>: Restrict launched processes to the specified logical CPUs on each node
(comma-separated list). Note that the binding options will still apply within the specified envelope —
e.g., you can elect to bind each process to only one CPU within the specified CPU set.
The following options specify the number of processes to launch. Note that none of the options imply a
particular binding policy — e.g., requesting N processes for each package does not imply that the
processes will be bound to the package.
• -n, --n, -c, -np <#>: Run this many copies of the program on the given nodes. This option indicates
that the specified file is an executable program and not an application context. If no value is
provided for the number of copies to execute (i.e., neither the -n nor its synonyms are provided on the
command line), Open MPI will automatically execute a copy of the program on each process slot (see
PRRTE’s defintion of “slot” for description of a “process slot”). This feature, however, can only be
used in the SPMD model and will return an error (without beginning execution of the application)
otherwise.
NOTE:
The -n option is the preferred option to be used to specify the number of copies of the program to
be executed, but the alternate options are also accepted.
• --map-by ppr:N:<object>: Launch N times the number of objects of the specified type on each node.
• --npersocket <#persocket>: On each node, launch this many processes times the number of processor
sockets on the node. The -npersocket option also turns on the --bind-to-socket option. (deprecated in
favor of --map-by ppr:n:package)
• --npernode <#pernode>: On each node, launch this many processes. (deprecated in favor of --map-by
ppr:n:node).
• --pernode: On each node, launch one process — equivalent to --npernode 1. (deprecated in favor of
--map-by ppr:1:node)
To map processes:
• --map-by <object>: Map to the specified object, defaults to package. Supported options include slot,
hwthread, core, L1cache, L2cache, L3cache, package, numa, node, seq, rankfile, pe-list=#, and ppr. Any
object can include modifiers by adding a : and any combination of the following:
• pe=n: bind n processing elements to each proc
• span: load balance the processes across the allocation
• oversubscribe: allow more processes on a node than processing elements
• nooversubscribe: do not allow more processes on a node than processing elements (default)
• nolocal: do not place processes on the same host as the mpirun process
• hwtcpus: use hardware threads as CPU slots for mapping
• corecpus: use processor cores as CPU slots for mapping (default)
• file=filename: used with rankfile; use filename to specify the file to use
• ordered: used with pe-list to bind each process to one of the specified processing elements
NOTE:
socket is also accepted as an alias for package.
• --bycore: Map processes by core (deprecated in favor of --map-by core).
• --byslot: Map and rank processes round-robin by slot (deprecated in favor of --map-by slot).
• --nolocal: Do not run any copies of the launched application on the same node as orterun is running.
This option will override listing the localhost with --host or any other host-specifying mechanism.
Alias for --map-by :nolocal.
• --nooversubscribe: Do not oversubscribe any nodes; error (without starting any processes) if the
requested number of processes would cause oversubscription. This option implicitly sets “max_slots”
equal to the “slots” value for each node. (Enabled by default). Alias for --map-by :nooversubscribe.
• --oversubscribe: Nodes are allowed to be oversubscribed, even on a managed system, and overloading of
processing elements. Alias for --map-by :oversubscribe.
• --bynode: Launch processes one per node, cycling by node in a round-robin fashion. This spreads
processes evenly among nodes and assigns MPI_COMM_WORLD ranks in a round-robin, “by node” manner.
(deprecated in favor of --map-by node)
• --cpu-list <cpus>: Comma-delimited list of processor IDs to which to bind processes [default=``NULL``].
Processor IDs are interpreted as hwloc logical core IDs.
NOTE:
You can run Run the hwloc lstopo(1) command to see a list of available cores and their logical IDs.
To order processes’ ranks in MPI_COMM_WORLD:
• --rank-by <mode>: Rank in round-robin fashion according to the specified mode, defaults to slot.
Supported options include slot, node, fill, and span.
For process binding:
• --bind-to <object>: Bind processes to the specified object, defaults to core. Supported options
include slot, hwthread, core, l1cache, l2cache, l3cache, package, numa, and none.
• --cpus-per-proc <#perproc>: Bind each process to the specified number of cpus. (deprecated in favor of
--map-by <obj>:PE=n)
• --cpus-per-rank <#perrank>: Alias for --cpus-per-proc. (deprecated in favor of --map-by <obj>:PE=n)
• --bind-to-core Bind processes to cores (deprecated in favor of --bind-to core)
• --bind-to-socket: Bind processes to processor sockets (deprecated in favor of --bind-to package)
• --report-bindings: Report any bindings for launched processes.
For rankfiles:
• --rankfile <rankfile>: Provide a rankfile file. (deprecated in favor of --map-by rankfile:file=FILE)
To manage standard I/O:
• --output-filename <filename>: Redirect the stdout, stderr, and stddiag of all processes to a
process-unique version of the specified filename. Any directories in the filename will automatically be
created. Each output file will consist of filename.id, where the id will be the processes’ rank in
MPI_COMM_WORLD, left-filled with zero’s for correct ordering in listings. A relative path value will be
converted to an absolute path based on the cwd where mpirun is executed. Note that this will not work
on environments where the file system on compute nodes differs from that where mpirun(1) is executed.
• --stdin <rank>: The MPI_COMM_WORLD rank of the process that is to receive stdin. The default is to
forward stdin to MPI_COMM_WORLD rank 0, but this option can be used to forward stdin to any process. It
is also acceptable to specify none, indicating that no processes are to receive stdin.
• --merge-stderr-to-stdout: Merge stderr to stdout for each process.
• --tag-output: Tag each line of output to stdout, stderr, and stddiag with [jobid, MCW_rank]<stdxxx>
indicating the process jobid and MPI_COMM_WORLD rank of the process that generated the output, and the
channel which generated it.
• --timestamp-output: Timestamp each line of output to stdout, stderr, and stddiag.
• --xml: Provide all output to stdout, stderr, and stddiag in an XML format.
• --xml-file <filename> Provide all output in XML format to the specified file.
• --xterm <ranks>: Display the output from the processes identified by their MPI_COMM_WORLD ranks in
separate xterm windows. The ranks are specified as a comma-separated list of ranges, with a -1
indicating all. A separate window will be created for each specified process.
NOTE:
xterm will normally terminate the window upon termination of the process running within it. However,
by adding a ! to the end of the list of specified ranks, the proper options will be provided to
ensure that xterm keeps the window open after the process terminates, thus allowing you to see the
process’ output. Each xterm window will subsequently need to be manually closed. Note: In some
environments, xterm may require that the executable be in the user’s path, or be specified in
absolute or relative terms. Thus, it may be necessary to specify a local executable as ./my_mpi_app
instead of just my_mpi_app. If xterm fails to find the executable, mpirun will hang, but still
respond correctly to a ctrl-C. If this happens, please check that the executable is being specified
correctly and try again.
To manage files and runtime environment:
• --path <path>: <path> that will be used when attempting to locate the requested executables. This is
used prior to using the local PATH environment variable setting.
• --prefix <dir>: Prefix directory that will be used to set the PATH and LD_LIBRARY_PATH on the remote
node before invoking Open MPI or the target process. See the Remote Execution section, below.
• --noprefix: Disable the automatic --prefix behavior
• --preload-binary: Copy the specified executable(s) to remote machines prior to starting remote
processes. The executables will be copied to the Open MPI session directory and will be deleted upon
completion of the job.
• --preload-files <files>: Preload the comma-separated list of files to the current working directory of
the remote machines where processes will be launched prior to starting those processes.
• --set-cwd-to-session-dir: Set the working directory of the started processes to their session
directory.
• --wd <dir>: Synonym for -wdir.
• --wdir <dir>: Change to the directory <dir> before the user’s program executes. See the Current
Working Directory section for notes on relative paths. Note: If the --wdir option appears both on the
command line and in an application context, the context will take precedence over the command line.
Thus, if the path to the desired wdir is different on the backend nodes, then it must be specified as
an absolute path that is correct for the backend node.
• -x <env>: Export the specified environment variables to the remote nodes before executing the program.
Only one environment variable can be specified per -x option. Existing environment variables can be
specified or new variable names specified with corresponding values. For example:
shell$ mpirun -x DISPLAY -x OFILE=/tmp/out ...
The parser for the -x option is not very sophisticated; it does not even understand quoted values.
Users are advised to set variables in the environment, and then use -x to export (not define) them.
Setting MCA parameters:
• --gmca <key> <value>: Pass global MCA parameters that are applicable to all contexts. <key> is the
parameter name; <value> is the parameter value.
• --mca <key> <value>: Send arguments to various MCA modules. See the Setting MCA Parameters section for
more details.
NOTE:
Open MPI will attempt to discern PMIx and PRRTE MCA parameters passed via --mca and handle them
appropriately, but it may not always guess correctly. It is best to use --pmixmca and --prtemca
when passing MCA parammeters to PMIx and PRRTE, respectively.
• --pmixmca <key> <value>: Send arguments to MCA modules in the PMIx subsystem. See the Setting MCA
Parameters section for more details.
• --prtemca <key> <value>: Send arguments to MCA modules in the PMIx Reference Runtime Environment
(PRRTE) subsystem. See the Setting MCA Parameters section for more details.
• --tune <tune_file>: Specify a tune file to set arguments for various MCA modules and environment
variables. See the :ref:` Setting MCA parameters and environment variables from file
<man1-mpirun-setting-mca-params-from-file>`. --am <arg> is an alias for --tune <arg>.
For debugging:
• --get-stack-traces: When paired with the --timeout option, mpirun will obtain and print out stack
traces from all launched processes that are still alive when the timeout expires. Note that obtaining
stack traces can take a little time and produce a lot of output, especially for large process-count
jobs.
• --timeout <seconds>: The maximum number of seconds that mpirun will run. After this many seconds,
mpirun will abort the launched job and exit with a non-zero exit status. Using --timeout can be also
useful when combined with the --get-stack-traces option.
There are also other options:
• --allow-run-as-root: Allow mpirun to run when executed by the root user (mpirun defaults to aborting
when launched as the root user). Be sure to see the Running as root section for more detail.
• --app <appfile>: Provide an appfile, ignoring all other command line options.
• --continuous: Job is to run until explicitly terminated.
• --disable-recovery: Disable recovery (resets all recovery options to off).
• --do-not-launch: Perform all necessary operations to prepare to launch the application, but do not
actually launch it.
• --enable-recovery: Enable recovery from process failure (default: disabled)
• --leave-session-attached: Do not detach back-end daemons used by this application. This allows error
messages from the daemons as well as the underlying environment (e.g., when failing to launch a daemon)
to be output.
• --max-restarts <num>: Max number of times to restart a failed process.
• --personality <list>: Comma-separated list of programming model, languages, and containers being used
(default=``ompi``).
• --ppr <list>: Comma-separated list of number of processes on a given resource type (default: none).
Alias for --map-by ppr:N:OBJ.
• --report-child-jobs-separately: Return the exit status of the primary job only.
• --report-events <URI>: Report events to a tool listening at the specified URI.
• --report-pid <channel>: Print out mpirun’s PID during startup. The channel must be either a - to
indicate that the PID is to be output to stdout, a + to indicate that the PID is to be output to
stderr, or a filename to which the PID is to be written.
• --report-uri <channel>: Print out mpirun’s URI during startup. The channel must be either a - to
indicate that the URI is to be output to stdout, a + to indicate that the URI is to be output to
stderr, or a filename to which the URI is to be written.
• --show-progress: Output a brief periodic report on launch progress.
• --terminate: Terminate the DVM.
• --use-hwthread-cpus: Use hardware threads as independent CPUs.
Note that if a number of slots is not provided to Open MPI (e.g., via the slots keyword in a hostfile
or from a resource manager such as Slurm), the use of this option changes the default calculation of
number of slots on a node. See the PRRTE’s defintion of “slot” for more details.
Also note that the use of this option changes the Open MPI’s definition of a “processor element” from a
processor core to a hardware thread. See PRRTE’s defintion of a “processor element” for more details.
The following options are useful for developers; they are not generally useful to most Open MPI users:
• --debug-daemons: Enable debugging of the run-time daemons used by this application.
• --debug-daemons-file: Enable debugging of the run-time daemons used by this application, storing output
in files.
• --display-devel-map: Display a more detailed table showing the mapped location of each process prior to
launch.
• --display-topo: Display the topology as part of the process map just before launch.
• --launch-agent: Name of the executable that is to be used to start processes on the remote nodes. The
default is prted. This option can be used to test new daemon concepts, or to pass options back to the
daemons without having mpirun itself see them. For example, specifying a launch agent of prted
--prtemca odls_base_verbose 5 allows the developer to ask the prted for debugging output without
clutter from mpirun itself.
• --report-state-on-timeout: When paired with the --timeout command line option, report the run-time
subsystem state of each process when the timeout expires.
There may be other options listed with mpirun --help.
Environment Variables
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
• MPIEXEC_TIMEOUT: Synonym for the --timeout command line option.
DESCRIPTION
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
One invocation of mpirun starts an MPI application running under Open MPI. If the application is single
process multiple data (SPMD), the application can be specified on the mpirun command line.
If the application is multiple instruction multiple data (MIMD), comprising of multiple programs, the set
of programs and argument can be specified in one of two ways: Extended Command Line Arguments, and
Application Context.
An application context describes the MIMD program set including all arguments in a separate file. This
file essentially contains multiple mpirun command lines, less the command name itself. The ability to
specify different options for different instantiations of a program is another reason to use an
application context.
Extended command line arguments allow for the description of the application layout on the command line
using colons (:) to separate the specification of programs and arguments. Some options are globally set
across all specified programs (e.g., --hostfile), while others are specific to a single program (e.g.,
-n).
Specifying Host Nodes
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
Host nodes can be identified on the mpirun command line with the --host option or in a hostfile.
For example:
shell$ mpirun -H aa,aa,bb ./a.out
Launches two processes on node aa and one on bb.
Or, consider the hostfile:
shell$ cat myhostfile
aa slots=2
bb slots=2
cc slots=2
Here, we list both the host names (aa, bb, and cc) but also how many slots there are for each.
shell$ mpirun --hostfile myhostfile ./a.out
will launch two processes on each of the three nodes.
shell$ mpirun --hostfile myhostfile --host aa ./a.out
will launch two processes, both on node aa.
shell$ mpirun --hostfile myhostfile --host dd ./a.out
will find no hosts to run on and will abort with an error. That is, the specified host dd is not in the
specified hostfile.
When running under resource managers (e.g., Slurm, Torque, etc.), Open MPI will obtain both the hostnames
and the number of slots directly from the resource manager.
Specifying Number of Processes
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
As we have just seen, the number of processes to run can be set using the hostfile. Other mechanisms
exist.
The number of processes launched can be specified as a multiple of the number of nodes or processor
packages available. For example,
shell$ mpirun -H aa,bb --map-by ppr:2:package ./a.out
launches processes 0-3 on node aa and process 4-7 on node bb (assuming aa and bb both contain 4 slots
each).
shell$ mpirun -H aa,bb --map-by ppr:2:node ./a.out
launches processes 0-1 on node aa and processes 2-3 on node bb.
shell$ mpirun -H aa,bb --map-by ppr:1:node ./a.out
launches one process per host node.
mpirun -H aa,bb --pernode ./a.out
is the same as --map-by ppr:1:node and --npernode 1.
Another alternative is to specify the number of processes with the -n option. Consider now the hostfile:
shell$ cat myhostfile
aa slots=4
bb slots=4
cc slots=4
Now run with myhostfile:
shell$ mpirun --hostfile myhostfile -n 6 ./a.out
will launch processes 0-3 on node aa and processes 4-5 on node bb. The remaining slots in the hostfile
will not be used since the -n option indicated that only 6 processes should be launched.
Mapping Processes to Nodes: Using Policies
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
The examples above illustrate the default mapping of process processes to nodes. This mapping can also
be controlled with various mpirun options that describe mapping policies.
Consider the same hostfile as above, again with -n 6. The table below lists a few mpirun variations, and
shows which MPI_COMM_WORLD ranks end up on which node:
┌──────────────────────┬─────────┬─────────┬─────────┐
│ Command │ Node aa │ Node bb │ Node cc │
├──────────────────────┼─────────┼─────────┼─────────┤
│ mpirun │ 0 1 2 3 │ 4 5 │ │
├──────────────────────┼─────────┼─────────┼─────────┤
│ mpirun --map-by node │ 0 3 │ 1 4 │ 2 5 │
├──────────────────────┼─────────┼─────────┼─────────┤
│ mpirun --nolocal │ │ 0 1 2 3 │ 4 5 │
└──────────────────────┴─────────┴─────────┴─────────┘
The --map-by node option will load balance the processes across the available nodes, numbering each
process in a round-robin fashion.
The --nolocal option prevents any processes from being mapped onto the local host (in this case node aa).
While mpirun typically consumes few system resources, --nolocal can be helpful for launching very large
jobs where mpirun may actually need to use noticeable amounts of memory and/or processing time.
Just as -n can specify fewer processes than there are slots, it can also oversubscribe the slots. For
example, with the same hostfile:
shell$ mpirun --hostfile myhostfile -n 14 ./a.out
will launch processes 0-3 on node aa, 4-7 on bb, and 8-11 on cc. It will then add the remaining two
processes to whichever nodes it chooses.
One can also specify limits to oversubscription. For example, with the same hostfile:
shell$ mpirun --hostfile myhostfile -n 14 --nooversubscribe ./a.out
will produce an error since --nooversubscribe prevents oversubscription.
Limits to oversubscription can also be specified in the hostfile itself:
shell$ cat myhostfile
aa slots=4 max_slots=4
bb max_slots=4
cc slots=4
The max_slots field specifies such a limit. When it does, the slots value defaults to the limit. Now:
shell$ mpirun --hostfile myhostfile -n 14 ./a.out
causes the first 12 processes to be launched as before, but the remaining two processes will be forced
onto node cc. The other two nodes are protected by the hostfile against oversubscription by this job.
Using the --nooversubscribe option can be helpful since Open MPI currently does not get max_slots values
from the resource manager.
Of course, -n can also be used with the -H or -host option. For example:
shell$ mpirun -H aa,bb -n 8 ./a.out
launches 8 processes. Since only two hosts are specified, after the first two processes are mapped, one
to aa and one to bb, the remaining processes oversubscribe the specified hosts.
And here is a MIMD example:
shell$ mpirun -H aa -n 1 hostname : -H bb,cc -n 2 uptime
will launch process 0 running hostname on node aa and processes 1 and 2 each running uptime on nodes bb
and cc, respectively.
Mapping, Ranking, and Binding: Oh My!
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
Open MPI employs a three-phase procedure for assigning process locations and ranks:
1. Mapping: Assigns a default location to each process
2. Ranking: Assigns an MPI_COMM_WORLD rank value to each process
3. Binding: Constrains each process to run on specific processors
The mapping step is used to assign a default location to each process based on the mapper being employed.
Mapping by slot, node, and sequentially results in the assignment of the processes to the node level. In
contrast, mapping by object, allows the mapper to assign the process to an actual object on each node.
Note that the location assigned to the process is independent of where it will be bound — the assignment
is used solely as input to the binding algorithm.
The mapping of process processes to nodes can be defined not just with general policies but also, if
necessary, using arbitrary mappings that cannot be described by a simple policy. One can use the
“sequential mapper,” which reads the hostfile line by line, assigning processes to nodes in whatever
order the hostfile specifies. Use the ---map-by seq option. For example, using the same hostfile as
before:
shell$ mpirun -hostfile myhostfile --map-by seq ./a.out
will launch three processes, one on each of nodes aa, bb, and cc, respectively. The slot counts don’t
matter; one process is launched per line on whatever node is listed on the line.
Another way to specify arbitrary mappings is with a rankfile, which gives you detailed control over
process binding as well. Rankfiles are discussed below.
The second phase focuses on the ranking of the process within the job’s MPI_COMM_WORLD. Open MPI
separates this from the mapping procedure to allow more flexibility in the relative placement of MPI
processes. This is best illustrated by considering the following cases where we used the --np 8 --map-by
ppr:2:package --host aa:4,bb:4 option:
┌──────────────────────────────┬───────────┬───────────┐
│ Option │ Node aa │ Node bb │
├──────────────────────────────┼───────────┼───────────┤
│ --rank-by fill (i.e., dense │ 0 1 | 2 3 │ 4 5 | 6 7 │
│ packing) Default │ │ │
├──────────────────────────────┼───────────┼───────────┤
│ --rank-by span (i.e., sparse │ 0 4 | 1 5 │ 2 6 | 3 7 │
│ or load balanced packing) │ │ │
├──────────────────────────────┼───────────┼───────────┤
│ --rank-by node │ 0 2 | 4 6 │ 1 3 | 5 7 │
└──────────────────────────────┴───────────┴───────────┘
Ranking by fill assigns MCW ranks in a simple progression across each node. Ranking by span and by slot
provide the identical result — a round-robin progression of the packages across all nodes before
returning to the first package on the first node. Ranking by node assigns MCW ranks iterating first
across nodes then by package.
The binding phase actually binds each process to a given set of processors. This can improve performance
if the operating system is placing processes suboptimally. For example, it might oversubscribe some
multi-core processor packages, leaving other packages idle; this can lead processes to contend
unnecessarily for common resources. Or, it might spread processes out too widely; this can be suboptimal
if application performance is sensitive to interprocess communication costs. Binding can also keep the
operating system from migrating processes excessively, regardless of how optimally those processes were
placed to begin with.
The processors to be used for binding can be identified in terms of topological groupings — e.g., binding
to an l3cache will bind each process to all processors within the scope of a single L3 cache within their
assigned location. Thus, if a process is assigned by the mapper to a certain package, then a --bind-to
l3cache directive will cause the process to be bound to the processors that share a single L3 cache
within that package.
Alternatively, processes can be mapped and bound to specified cores using the --map-by pe-list= option.
For example, --map-by pe-list=0,2,5 will map three processes all three of which will be bound to logical
cores 0,2,5. If you intend to bind each of the three processes to different cores then the :ordered
qualifier can be used like --map-by pe-list=0,2,5:ordered. In this example, the first process on a node
will be bound to CPU 0, the second process on the node will be bound to CPU 2, and the third process on
the node will be bound to CPU 5.
Finally, --report-bindings can be used to report bindings.
As an example, consider a node with two processor packages, each comprised of four cores, and each of
those cores contains one hardware thread. The --report-bindings option shows the binding of each process
in a descriptive manner. Below are some examples.
shell$ mpirun --np 4 --report-bindings --map-by core --bind-to core
[...] Rank 0 bound to package[0][core:0]
[...] Rank 1 bound to package[0][core:1]
[...] Rank 2 bound to package[0][core:2]
[...] Rank 3 bound to package[0][core:3]
In the above case, the processes bind to successive cores.
shell$ mpirun --np 4 --report-bindings --map-by package --bind-to package
[...] Rank 0 bound to package[0][core:0-3]
[...] Rank 1 bound to package[0][core:0-3]
[...] Rank 2 bound to package[1][core:4-7]
[...] Rank 3 bound to package[1][core:4-7]
In the above case, processes bind to all cores on successive packages. The processes cycle through the
processor packages in a round-robin fashion as many times as are needed. By default, the processes are
ranked in a fill manner.
shell$ mpirun --np 4 --report-bindings --map-by package --bind-to package --rank-by span
[...] Rank 0 bound to package[0][core:0-3]
[...] Rank 1 bound to package[1][core:4-7]
[...] Rank 2 bound to package[0][core:0-3]
[...] Rank 3 bound to package[1][core:4-7]
The above case demonstrates the difference in ranking when the span qualifier is used instead of the
default.
shell$ mpirun --np 4 --report-bindings --map-by slot:PE=2 --bind-to core
[...] Rank 0 bound to package[0][core:0-1]
[...] Rank 1 bound to package[0][core:2-3]
[...] Rank 2 bound to package[0][core:4-5]
[...] Rank 3 bound to package[0][core:6-7]
In the above case, the output shows us that 2 cores have been bound per process. Specifically, the
mapping by slot with the PE=2 qualifier indicated that each slot (i.e., process) should consume two
processor elements. By default, Open MPI defines “processor element” as “core”, and therefore the
--bind-to core caused each process to be bound to both of the cores to which it was mapped.
shell$ mpirun --np 4 --report-bindings --map-by slot:PE=2 --use-hwthread-cpus
[...]] Rank 0 bound to package[0][hwt:0-1]
[...]] Rank 1 bound to package[0][hwt:2-3]
[...]] Rank 2 bound to package[0][hwt:4-5]
[...]] Rank 3 bound to package[0][hwt:6-7]
In the above case, we replace the --bind-to core with --use-hwthread-cpus. The --use-hwthread-cpus is
converted into --bind-to hwthread and tells the --report-bindings output to show the hardware threads to
which a process is bound. In this case, processes are bound to 2 hardware threads per process.
shell$ mpirun --np 4 --report-bindings --bind-to none
[...] Rank 0 is not bound (or bound to all available processors)
[...] Rank 1 is not bound (or bound to all available processors)
[...] Rank 2 is not bound (or bound to all available processors)
[...] Rank 3 is not bound (or bound to all available processors)
In the above case, binding is turned off and are reported as such.
Open MPI’s support for process binding depends on the underlying operating system. Therefore, certain
process binding options may not be available on every system.
Process binding can also be set with MCA parameters. Their usage is less convenient than that of mpirun
options. On the other hand, MCA parameters can be set not only on the mpirun command line, but
alternatively in a system or user mca-params.conf file or as environment variables, as described in the
Setting MCA Parameters. These are MCA parameters for the PRRTE runtime so the command line argument
--prtemca (yes, prte with a single r, not two r’s) must be used to pass the MCA parameter key/value pair.
Alternatively, the MCA parameter key/value pair may be specific on the command line by prefixing the key
with PRTE_MCA_ (again, that is not a typo: PRTE not PRRTE). Some examples include:
┌───────────────────┬──────────────────────────────┬─────────┐
│ Option │ PRRTE MCA parameter key │ Value │
├───────────────────┼──────────────────────────────┼─────────┤
│ --map-by core │ rmaps_default_mapping_policy │ core │
├───────────────────┼──────────────────────────────┼─────────┤
│ --map-by package │ rmaps_default_mapping_policy │ package │
├───────────────────┼──────────────────────────────┼─────────┤
│ --rank-by fill │ rmaps_default_ranking_policy │ fill │
├───────────────────┼──────────────────────────────┼─────────┤
│ --bind-to core │ hwloc_default_binding_policy │ core │
├───────────────────┼──────────────────────────────┼─────────┤
│ --bind-to package │ hwloc_default_binding_policy │ package │
├───────────────────┼──────────────────────────────┼─────────┤
│ --bind-to none │ hwloc_default_binding_policy │ none │
└───────────────────┴──────────────────────────────┴─────────┘
Defaults for Mapping, Ranking, and Binding
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
If the user does not specify each of --map-by, --rank-by, and --bind-to option then the default values
are as follows:
• If no options are specified then
• If the number of processes is less than or equal to 2, then:
• --map-by is core
• --bind-to is core
• --rank-by is span
• Result: --map-by core --bind-to core --rank-by span
• Otherwise:
• --map-by is package
• --bind-to is package
• --rank-by is fill
• Result: --map-by package --bind-to package --rank-by fill
• If only --map-by OBJ (where OBJ is something like core) is specified, then:
• --map-by specified OBJ
• --bind-to uses the same OBJ as --map-by
• --rank-by defaults to fill
• Result: --map-by OBJ --bind-to OBJ --rank-by fill
• If only --bind-to OBJ (where OBJ is something like core) is specified, then:
• --map-by is either core or package depending on the number of processes
• --bind-to specified OBJ
• --rank-by defaults to fill
• Result: --map-by OBJ --bind-to OBJ --rank-by fill
• If --map-by OBJ1 --bind-to OBJ2, then:
• --map-by specified OBJ1
• --bind-to specified OBJ2
• --rank-by defaults to fill
• Result: --map-by OBJ2 --bind-to OBJ2 --rank-by fill
Consider 2 identical hosts (hostA and hostB) with 2 packages (denoted by []) each with 8 cores (denoted
by /../) and 2 hardware threads per core (denoted by a .).
Default of --map-by core --bind-to core --rank-by span when the number of processes is less than or equal
to 2.
shell$ mpirun --np 2 --host hostA:4,hostB:2 ./a.out
R0 hostA [BB/../../../../../../..][../../../../../../../..]
R1 hostA [../BB/../../../../../..][../../../../../../../..]
Default of --map-by package --bind-to package --rank-by fill when the number of processes is greater than
2.
shell$ mpirun --np 4 --host hostA:4,hostB:2 ./a.out
R0 hostA [BB/BB/BB/BB/BB/BB/BB/BB][../../../../../../../..]
R1 hostA [BB/BB/BB/BB/BB/BB/BB/BB][../../../../../../../..]
R2 hostA [../../../../../../../..][BB/BB/BB/BB/BB/BB/BB/BB]
R3 hostA [../../../../../../../..][BB/BB/BB/BB/BB/BB/BB/BB]
If only --map-by OBJ is specified, then it implies --bind-to OBJ --rank-by fill. The example below
results in --map-by hwthread --bind-to hwthread --rank-by fill
shell$ mpirun --np 4 --map-by hwthread --host hostA:4,hostB:2 ./a.out
R0 hostA [B./../../../../../../..][../../../../../../../..]
R1 hostA [.B/../../../../../../..][../../../../../../../..]
R0 hostA [../B./../../../../../..][../../../../../../../..]
R1 hostA [../.B/../../../../../..][../../../../../../../..]
If only --bind-to OBJ is specified, then --map-by is determined by the number of processes and --rank-by
fill. The example below results in --map-by package --bind-to core --rank-by fill
shell$ mpirun --np 4 --bind-to core --host hostA:4,hostB:2 ./a.out
R0 hostA [BB/../../../../../../..][../../../../../../../..]
R1 hostA [../BB/../../../../../..][../../../../../../../..]
R2 hostA [../../../../../../../..][BB/../../../../../../..]
R3 hostA [../../../../../../../..][../BB/../../../../../..]
The mapping pattern might be better seen if we change the default --rank-by from fill to span. First, the
processes are mapped by package iterating between the two marking a core at a time. Next, the processes
are ranked in a spanning manner that load balances them across the object they were mapped against.
Finally, the processes are bound to the core that they were mapped againast.
shell$ mpirun --np 4 --bind-to core --rank-by span --host hostA:4,hostB:2 ./a.out
R0 hostA [BB/../../../../../../..][../../../../../../../..]
R1 hostA [../../../../../../../..][BB/../../../../../../..]
R2 hostA [../BB/../../../../../..][../../../../../../../..]
R3 hostA [../../../../../../../..][../BB/../../../../../..]
Rankfiles
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
Rankfiles are text files that specify detailed information about how individual processes should be
mapped to nodes, and to which processor(s) they should be bound. Each line of a rankfile specifies the
location of one process (for MPI jobs, the process’ “rank” refers to its rank in MPI_COMM_WORLD). The
general form of each line in the rankfile is:
rank <N>=<hostname> slot=<slot list>
For example:
shell$ cat myrankfile
rank 0=aa slot=1:0-2
rank 1=bb slot=0:0,1
rank 2=cc slot=2-3
shell$ mpirun -H aa,bb,cc,dd --map-by rankfile:file=myrankfile ./a.out
Means that:
• Rank 0 runs on node aa, bound to logical package 1, cores 0-2.
• Rank 1 runs on node bb, bound to logical package 0, cores 0 and 1.
• Rank 2 runs on node cc, bound to logical cores 2 and 3.
Note that only logicical processor locations are supported. By default, the values specifed are assumed
to be cores. If you intend to specify specific hardware threads then you must add the :hwtcpus qualifier
to the --map-by command line option (e.g., --map-by rankfile:file=myrankfile:hwtcpus).
If the binding specification overlaps between any two ranks then an error occurs. If you intend to allow
processes to share the same logical processing unit then you must pass the --bind-to :overload-allowed
command line option to tell the runtime to ignore this check.
The hostnames listed above are “absolute,” meaning that actual resolveable hostnames are specified.
However, hostnames can also be specified as “relative,” meaning that they are specified in relation to an
externally-specified list of hostnames (e.g., by mpirun’s --host argument, a hostfile, or a job
scheduler).
The “relative” specification is of the form +n<X>, where X is an integer specifying the Xth hostname in
the set of all available hostnames, indexed from 0. For example:
shell$ cat myrankfile
rank 0=+n0 slot=1:0-2
rank 1=+n1 slot=0:0,1
rank 2=+n2 slot=2-3
shell$ mpirun -H aa,bb,cc,dd --map-by rankfile:file=myrankfile ./a.out
All package/core slot locations are specified as logical indexes.
NOTE:
The Open MPI v1.6 series used physical indexes. Starting in Open MPI v5.0 only logicial indexes are
supported and the rmaps_rank_file_physical MCA parameter is no longer recognized.
You can use tools such as Hwloc’s lstopo(1) to find the logical indexes of package and cores.
Application Context or Executable Program?
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
To distinguish the two different forms, mpirun looks on the command line for --app option. If it is
specified, then the file named on the command line is assumed to be an application context. If it is not
specified, then the file is assumed to be an executable program.
Locating Files
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
If no relative or absolute path is specified for a file, Open MPI will first look for files by searching
the directories specified by the --path option. If there is no --path option set or if the file is not
found at the --path location, then Open MPI will search the user’s PATH environment variable as defined
on the source node(s).
If a relative directory is specified, it must be relative to the initial working directory determined by
the specific starter used. For example when using the ssh starter, the initial directory is $HOME by
default. Other starters may set the initial directory to the current working directory from the
invocation of mpirun.
Current Working Directory
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
The --wdir mpirun option (and its synonym, --wd) allows the user to change to an arbitrary directory
before the program is invoked. It can also be used in application context files to specify working
directories on specific nodes and/or for specific applications.
If the --wdir option appears both in a context file and on the command line, the context file directory
will override the command line value.
If the -wdir option is specified, Open MPI will attempt to change to the specified directory on all of
the remote nodes. If this fails, mpirun will abort.
If the -wdir option is not specified, Open MPI will send the directory name where mpirun was invoked to
each of the remote nodes. The remote nodes will try to change to that directory. If they are unable
(e.g., if the directory does not exist on that node), then Open MPI will use the default directory
determined by the starter.
All directory changing occurs before the user’s program is invoked; it does not wait until MPI_INIT(3) is
called.
Standard I/O
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
Open MPI directs UNIX standard input to /dev/null on all processes except the MPI_COMM_WORLD rank 0
process. The MPI_COMM_WORLD rank 0 process inherits standard input from mpirun.
NOTE:
The node that invoked mpirun need not be the same as the node where the MPI_COMM_WORLD rank 0 process
resides. Open MPI handles the redirection of mpirun’s standard input to the rank 0 process.
Open MPI directs UNIX standard output and error from remote nodes to the node that invoked mpirun and
prints it on the standard output/error of mpirun. Local processes inherit the standard output/error of
mpirun and transfer to it directly.
Thus it is possible to redirect standard I/O for Open MPI applications by using the typical shell
redirection procedure on mpirun. For example:
shell$ mpirun -n 2 my_app < my_input > my_output
Note that in this example only the MPI_COMM_WORLD rank 0 process will receive the stream from my_input on
stdin. The stdin on all the other nodes will be tied to /dev/null. However, the stdout from all nodes
will be collected into the my_output file.
Signal Propagation
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
When mpirun receives a SIGTERM and SIGINT, it will attempt to kill the entire job by sending all
processes in the job a SIGTERM, waiting a small number of seconds, then sending all processes in the job
a SIGKILL.
SIGUSR1 and SIGUSR2 signals received by mpirun are propagated to all processes in the job.
A SIGTSTOP signal to mpirun will cause a SIGSTOP signal to be sent to all of the programs started by
mpirun and likewise a SIGCONT signal to mpirun will cause a SIGCONT sent.
Other signals are not currently propagated by mpirun.
Process Termination / Signal Handling
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
During the run of an MPI application, if any process dies abnormally (either exiting before invoking
MPI_FINALIZE(3), or dying as the result of a signal), mpirun will print out an error message and kill the
rest of the MPI application.
User signal handlers should probably avoid trying to cleanup MPI state (Open MPI is currently not
async-signal-safe; see MPI_INIT_THREAD(3) for details about MPI_THREAD_MULTIPLE and thread safety). For
example, if a segmentation fault occurs in MPI_SEND(3) (perhaps because a bad buffer was passed in) and a
user signal handler is invoked, if this user handler attempts to invoke MPI_FINALIZE(3), Bad Things could
happen since Open MPI was already “in” MPI when the error occurred. Since mpirun will notice that the
process died due to a signal, it is probably not necessary (and safest) for the user to only clean up
non-MPI state.
Process Environment
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
Processes in the MPI application inherit their environment from the PRRTE daemon upon the node on which
they are running. The environment is typically inherited from the user’s shell. On remote nodes, the
exact environment is determined by the boot MCA module used. The rsh launch module, for example, uses
either rsh/ssh to launch the PRRTE daemon on remote nodes, and typically executes one or more of the
user’s shell-setup files before launching the PRRTE daemon. When running dynamically linked applications
which require the LD_LIBRARY_PATH environment variable to be set, care must be taken to ensure that it is
correctly set when booting Open MPI.
See the Remote Execution section for more details.
Remote Execution
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
Open MPI requires that the PATH environment variable be set to find executables on remote nodes (this is
typically only necessary in rsh- or ssh-based environments — batch/scheduled environments typically copy
the current environment to the execution of remote jobs, so if the current environment has PATH and/or
LD_LIBRARY_PATH set properly, the remote nodes will also have it set properly). If Open MPI was compiled
with shared library support, it may also be necessary to have the LD_LIBRARY_PATH environment variable
set on remote nodes as well (especially to find the shared libraries required to run user MPI
applications).
However, it is not always desirable or possible to edit shell startup files to set PATH and/or
LD_LIBRARY_PATH. The --prefix option is provided for some simple configurations where this is not
possible.
The --prefix option takes a single argument: the base directory on the remote node where Open MPI is
installed. Open MPI will use this directory to set the remote PATH and LD_LIBRARY_PATH before executing
any Open MPI or user applications. This allows running Open MPI jobs without having pre-configured the
PATH and LD_LIBRARY_PATH on the remote nodes.
Open MPI adds the basename of the current node’s $bindir (the directory where Open MPI’s executables were
installed) to the prefix and uses that to set the PATH on the remote node. Similarly, Open MPI adds the
basename of the current node’s $libdir (the directory where Open MPI’s libraries were installed) to the
prefix and uses that to set the LD_LIBRARY_PATH on the remote node. For example:
• Local bindir: /local/node/directory/bin
• Local libdir: /local/node/directory/lib64
If the following command line is used:
shell$ mpirun --prefix /remote/node/directory
Open MPI will add /remote/node/directory/bin to the PATH and /remote/node/directory/lib64 to the
LD_LIBRARY_PATH on the remote node before attempting to execute anything.
The --prefix option is not sufficient if the installation paths on the remote node are different than the
local node (e.g., if /lib is used on the local node, but /lib64 is used on the remote node), or if the
installation paths are something other than a subdirectory under a common prefix.
Note that executing mpirun via an absolute pathname is equivalent to specifying --prefix without the last
subdirectory in the absolute pathname to mpirun. For example:
shell$ /usr/local/bin/mpirun ...
is equivalent to
shell$ mpirun --prefix /usr/local
Exported Environment Variables
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
All environment variables that are named in the form OMPI_* will automatically be exported to new
processes on the local and remote nodes. Environmental parameters can also be set/forwarded to the new
processes using the MCA parameter mca_base_env_list. The -x option to mpirun has been deprecated, but the
syntax of the MCA param follows that prior example. While the syntax of the -x option and MCA param
allows the definition of new variables, note that the parser for these options are currently not very
sophisticated — it does not even understand quoted values. Users are advised to set variables in the
environment and use the option to export them; not to define them.
Setting MCA Parameters
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
The --mca switch allows the passing of parameters to various MCA (Modular Component Architecture)
modules. MCA modules have direct impact on MPI programs because they allow tunable parameters to be set
at run time (such as which BTL communication device driver to use, what parameters to pass to that BTL,
etc.).
The --mca switch takes two arguments: <key> and <value>. The <key> argument generally specifies which
MCA module will receive the value. For example, the <key> btl is used to select which BTL to be used for
transporting MPI messages. The <value> argument is the value that is passed. For example:
shell$ mpirun --mca btl tcp,self -n 1 my_mpi_app
This tells Open MPI to use the tcp and self BTLs, and to run a single copy of my_mpi_app an allocated
node.
shell$ mpirun --mca btl self -n 1 my_mpi_app
Tells Open MPI to use the self BTL, and to run a single copy of my_mpi_app an allocated node.
The --mca switch can be used multiple times to specify different <key> and/or <value> arguments. If the
same <key> is specified more than once, the <value>``s are concatenated with a comma (,``) separating
them.
Note that the --mca switch is simply a shortcut for setting environment variables. The same effect may
be accomplished by setting corresponding environment variables before running mpirun. The form of the
environment variables that Open MPI sets is:
OMPI_MCA_<key>=<value>
Thus, the --mca switch overrides any previously set environment variables. The --mca settings similarly
override MCA parameters set in the $OPAL_PREFIX/etc/openmpi-mca-params.conf or
$HOME/.openmpi/mca-params.conf file.
Unknown <key> arguments are still set as environment variable — they are not checked (by mpirun) for
correctness. Illegal or incorrect <value> arguments may or may not be reported — it depends on the
specific MCA module.
To find the available component types under the MCA architecture, or to find the available parameters for
a specific component, use the ompi_info command. See the ompi_info(1) man page for detailed information
on this command.
Setting MCA parameters and environment variables from file
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
The --tune command line option and its synonym --mca mca_base_envar_file_prefix allows a user to set MCA
parameters and environment variables with the syntax described below. This option requires a single file
or list of files separated by “,” to follow.
A valid line in the file may contain zero or more -x or --mca. The following patterns are supported:
• --mca var val
• --mca var "val"
• -x var=val
• -x var
If any argument is duplicated in the file, the last value read will be used.
MCA parameters and environment specified on the command line have higher precedence than variables
specified in the file.
Running as root
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
WARNING:
The Open MPI team strongly advises against executing mpirun as the root user. MPI applications should
be run as regular (non-root) users.
mpirun will refuse to run as root by default.
To override this default, you can add the --allow-run-as-root option to the mpirun command line, or you
can set the environmental parameters OMPI_ALLOW_RUN_AS_ROOT=1 and OMPI_ALLOW_RUN_AS_ROOT_CONFIRM=1. Note
that it takes setting two environment variables to effect the same behavior as --allow-run-as-root in
order to stress the Open MPI team’s strong advice against running as the root user.
After extended discussions with communities who use containers (where running as the root user is the
default), there was a persistent desire to be able to enable root execution of mpirun via an
environmental control (vs. the existing --allow-run-as-root command line parameter). The compromise of
using two environment variables was reached: it allows root execution via an environmental control, but
it conveys the Open MPI team’s strong recommendation against this behavior.
Exit status
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
There is no standard definition for what mpirun should return as an exit status. After considerable
discussion, we settled on the following method for assigning the mpirun exit status (note: in the
following description, the “primary” job is the initial application started by mpirun — all jobs that are
spawned by that job are designated “secondary” jobs):
• If all processes in the primary job normally terminate with exit status 0, mpirun returns 0.
• If one or more processes in the primary job normally terminate with non-zero exit status, mpirun
returns the exit status of the process with the lowest MPI_COMM_WORLD rank to have a non-zero status.
• If all processes in the primary job normally terminate with exit status 0, and one or more processes in
a secondary job normally terminate with non-zero exit status, mpirun:
1. Returns the exit status of the process with the lowest MPI_COMM_WORLD rank in the lowest jobid to
have a non-zero status, and
2. Outputs a message summarizing the exit status of the primary and all secondary jobs.
• If the command line option --report-child-jobs-separately is set, we will return only the exit status
of the primary job. Any non-zero exit status in secondary jobs will be reported solely in a summary
print statement.
By default, the job will abort when any process terminates with non-zero status. The MCA parameter
--prtemca state_base_error_non_zero_exit can be set to “false” (or “0”) to cause Open MPI to not abort a
job if one or more processes return a non-zero status. In that situation the Open MPI records and notes
that processes exited with non-zero termination status to report the appropriate exit status of mpirun
(per bullet points above).
EXAMPLES
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
Be sure also to see the examples throughout the sections above.
shell$ mpirun -n 4 --mca btl tcp,sm,self prog1
Run 4 copies of prog1 using the tcp, sm (shared memory), and self (process loopback) BTL’s for the
transport of MPI messages.
RETURN VALUE
This is old, hard-coded content
Is this content still current / accurate? Should it be updated and retained, or removed?
mpirun returns 0 if all processes started by mpirun exit after calling MPI_FINALIZE(3). A non-zero value
is returned if an internal error occurred in mpirun, or one or more processes exited before calling
MPI_FINALIZE(3). If an internal error occurred in mpirun, the corresponding error code is returned. In
the event that one or more processes exit before calling MPI_FINALIZE(3), the return value of the
MPI_COMM_WORLD rank of the process that mpirun first notices died before calling MPI_FINALIZE(3) will be
returned. Note that, in general, this will be the first process that died but is not guaranteed to be
so.
If the --timeout command line option is used and the timeout expires before the job completes (thereby
forcing mpirun to kill the job) mpirun will return an exit status equivalent to the value of ETIMEDOUT
(which is typically 110 on Linux and OS X systems).
SEE ALSO:
MPI_INIT(3), MPI_INIT_THREAD(3), MPI_FINALIZE(3), ompi_info(1)
COPYRIGHT
2003-2025, The Open MPI Community
Feb 17, 2025 MPIRUN(1)