Ubuntu Manpage: gdal_grid - Creates regular grid from the scattered data.

Provided by: gdal-bin_3.10.2+dfsg-1build3_amd64

NAME

       gdal_grid - Creates regular grid from the scattered data.

SYNOPSIS

          gdal_grid [--help] [--help-general]
                    [-ot {Byte/Int16/UInt16/UInt32/Int32/Float32/Float64/
                    CInt16/CInt32/CFloat32/CFloat64}]
                    [-oo <NAME>=<VALUE>]...
                    [-of <format>] [-co <NAME>=<VALUE>]...
                    [-zfield <field_name>] [-z_increase <increase_value>] [-z_multiply <multiply_value>]
                    [-a_srs <srs_def>] [-spat <xmin> <ymin> <xmax> <ymax>]
                    [-clipsrc <xmin> <ymin> <xmax> <ymax>|<WKT>|<datasource>|spat_extent]
                    [-clipsrcsql <sql_statement>] [-clipsrclayer <layer>]
                    [-clipsrcwhere <expression>]
                    [-l <layername>]... [-where <expression>] [-sql <select_statement>]
                    [-txe <xmin> <xmax>] [-tye <ymin> <ymax>] [-tr <xres> <yres>] [-outsize <xsize> <ysize>]
                    [-a {<algorithm>[[:<parameter1>=<value1>]...]}] [-q]
                    <src_datasource> <dst_filename>

DESCRIPTION

       This  program creates a regular grid (raster) from the scattered data read from the OGR datasource. Input
       data will be interpolated to fill grid nodes with values,  you  can  choose  from  various  interpolation
       methods.

       It  is possible to set the GDAL_NUM_THREADS configuration option to parallelize the processing. The value
       to specify is the number of worker threads, or ALL_CPUS to use all the cores/CPUs of the computer.

       --help Show this help message and exit

       --help-general
              Gives a brief usage message for the generic GDAL commandline options and exit.

       -ot <type>
              Force the output image bands to have a specific data type supported by the driver,  which  may  be
              one  of  the following: Byte, Int8, UInt16, Int16, UInt32, Int32, UInt64, Int64, Float32, Float64,
              CInt16, CInt32, CFloat32 or CFloat64.

       If not set then a default type is used, which might not be supported by the relevant  driver,  causing  a
       error.

       -of <format>
              Select the output format. Starting with GDAL 2.3, if not specified, the format is guessed from the
              extension (previously was GTiff). Use the short format name.

       -txe <xmin> <xmax>
              Set georeferenced X extents of output file to be created.

       -tye <ymin> <ymax>
              Set georeferenced Y extents of output file to be created.

       -tr <xres> <yres>
              Set  output  file  resolution  (in  target  georeferenced  units).   Note  that  -tr just works in
              combination with a valid input from -txe and -tye

              New in version 3.2.

       -outsize <xsize> <ysize>
              Set the size of the output file in pixels and lines.  Note that -outsize cannot be used with -tr

       -a_srs <srs_def>
              Override the projection for the output file.  The srs_def may be any of the usual GDAL/OGR  forms,
              complete WKT, PROJ.4, EPSG:n or a file containing the WKT.  No reprojection is done.

       -zfield <field_name>
              Identifies  an  attribute  field  on  the  features  to  be used to get a Z value from. This value
              overrides the Z value read from the feature geometry record (naturally, if you have a Z  value  in
              the geometry, otherwise you have no choice and should specify a field name containing a Z value).

       -z_increase <increase_value>
              Addition  to  the  attribute  field on the features to be used to get a Z value from. The addition
              should be the same unit as the Z value. The result value will be Z value + Z increase  value.  The
              default value is 0.

       -z_multiply <multiply_value>
              This  is  multiplication  ratio  for  the  Z field. This can be used for a shift from e.g. feet to
              meters or from elevation to depth. The result value will be (Z value  +  Z  increase  value)  *  Z
              multiply value.  The default value is 1.

       -a {<algorithm>[[:<parameter1>=<value1>]...]}
              Set  the  interpolation  algorithm  or  data  metric name and (optionally) its parameters. See the
              Interpolation algorithms and Data metrics sections for further discussion of available options.

       -spat <xmin> <ymin> <xmax> <ymax>
              Adds a spatial filter to select only features contained  within  the  bounding  box  described  by
              (xmin, ymin) - (xmax, ymax).

       -clipsrc [<xmin> <ymin> <xmax> <ymax>]|<WKT>|<datasource>|spat_extent
              Adds  a  spatial  filter  to  select  only  features  contained  within the specified bounding box
              (expressed in source SRS), WKT geometry (POLYGON or MULTIPOLYGON), from a  datasource  or  to  the
              spatial  extent  of  the  -spat  option  if  you  use  the  spat_extent keyword. When specifying a
              datasource, you will generally want to use it in combination with the -clipsrclayer, -clipsrcwhere
              or -clipsrcsql options.

       -clipsrcsql <sql_statement>
              Select desired geometries using an SQL query instead.

       -clipsrclayer <layername>
              Select the named layer from the source clip datasource.

       -clipsrcwhere <expression>
              Restrict desired geometries based on an attribute query.

       -l <layername>
              Indicates the layer(s) from the datasource that will be used for input features.  May be specified
              multiple times, but at least one layer name or a -sql option must be specified.

       -where <expression>
              An optional SQL WHERE style query expression to be applied to select features to process from  the
              input layer(s).

       -sql <select_statement>
              An  SQL statement to be evaluated against the datasource to produce a virtual layer of features to
              be processed.

       -oo <NAME>=<VALUE>
              New in version 3.7.

              Source dataset open option (format specific)

       -co <NAME>=<VALUE>
              Many formats have one or more optional creation options that can be used  to  control  particulars
              about  the  file  created.  For  instance, the GeoTIFF driver supports creation options to control
              compression, and whether the file should be tiled.

              The creation options available vary by format driver, and some simple  formats  have  no  creation
              options  at all. A list of options supported for a format can be listed with the --formats command
              line option but the documentation for the format is the definitive source of information on driver
              creation options.  See Raster drivers format specific documentation for legal creation options for
              each format.

       -q     Suppress progress monitor and other non-error output.

       <src_datasource>
              Any OGR supported readable datasource.

       <dst_filename>
              The GDAL supported output file.

INTERPOLATION ALGORITHMS

There are a number of interpolation algorithms to choose from.

More details about them can also be found in GDAL Grid Tutorial

invdist
Inverse distance to a power. This is the default algorithm. It has the following parameters:

• power: Weighting power (default 2.0).

• smoothing: Smoothing parameter (default 0.0).

• radius1: The first radius (X axis if rotation angle is 0) of the search ellipse. Set this parameter to
zero to use the whole point array. Default is 0.0.

• radius2: The second radius (Y axis if rotation angle is 0) of the search ellipse. Set this parameter to
zero to use the whole point array. Default is 0.0.

• radius: Set first and second radius (mutually exclusive with radius1 and radius2). Default is 0.0.
Added in GDAL 3.6

• angle: Angle of search ellipse rotation in degrees (counter clockwise, default 0.0).

• max_points: Maximum number of data points to use. Do not search for more points than this number. This
is only used if the search ellipse is set (both radii are non-zero). Zero means that all found points
should be used. Default is 0.

• min_points: Minimum number of data points to use. If less amount of points found the grid node
considered empty and will be filled with NODATA marker. This is only used if search ellipse is set
(both radii are non-zero). Default is 0.

• max_points_per_quadrant: Maximum number of data points to use per quadrant. Default is 0. Added in
GDAL 3.6. When specified, this actually uses invdistnn implementation.

• min_points_per_quadrant: Minimum number of data points to use per quadrant. Default is 0. Added in
GDAL 3.6. When specified, this actually uses invdistnn implementation.

• nodata: NODATA marker to fill empty points (default 0.0).

invdistnn
New in version 2.1.

Inverse distance to a power with nearest neighbor searching, ideal when max_points is used. It has
following parameters:

• power: Weighting power (default 2.0).

• smoothing: Smoothing parameter (default 0.0).

• radius: The radius of the search circle, which should be non-zero. Default is 1.0.

• max_points: Maximum number of data points to use. Do not search for more points than this number. Found
points will be ranked from nearest to furthest distance when weighting. Default is 12.

• min_points: Minimum number of data points to use. If less amount of points found the grid node is
considered empty and will be filled with NODATA marker. Default is 0.

• max_points_per_quadrant: Maximum number of data points to use per quadrant. Default is 0. Added in
GDAL 3.6. When specified, the algorithm will only take into account up to max_points_per_quadrant
points for each of the right-top, left-top, right-bottom and right-top quadrant relative to the point
being interpolated.

• min_points_per_quadrant: Minimum number of data points to use per quadrant. Default is 0. Added in
GDAL 3.6. If that number is not reached, the point being interpolated will be set with the NODATA
marker. When specified, the algorithm will collect at least min_points_per_quadrant points for each of
the right-top, left-top, right-bottom and right-top quadrant relative to the point being interpolated.

• nodata: NODATA marker to fill empty points (default 0.0).

When min_points_per_quadrant or max_points_per_quadrant is specified, the search will start with the
closest point to the point being interpolated from the first quadrant, then the closest point to the
point being interpolated from the second quadrant, etc. up to the 4th quadrant, and will continue with
the next closest point in the first quadrant, etc. until max_points and/or max_points_per_quadrant
thresholds are reached.

average
Moving average algorithm. It has following parameters:

• radius1: The first radius (X axis if rotation angle is 0) of search ellipse. Set this parameter to zero
to use whole point array. Default is 0.0.

• radius2: The second radius (Y axis if rotation angle is 0) of search ellipse. Set this parameter to
zero to use whole point array. Default is 0.0.

• radius: Set first and second radius (mutually exclusive with radius1 and radius2). Default is 0.0.
Added in GDAL 3.6

• angle: Angle of search ellipse rotation in degrees (counter clockwise, default 0.0).

• max_points: Maximum number of data points to use. Do not search for more points than this number. Found
points will be ranked from nearest to furthest distance when weighting. Default is 0. Added in GDAL 3.6
Only taken into account if one or both of min_points_per_quadrant or max_points_per_quadrant is
specified

• min_points: Minimum number of data points to use. If less amount of points found the grid node
considered empty and will be filled with NODATA marker. Default is 0.

• nodata: NODATA marker to fill empty points (default 0.0).

Note, that it is essential to set search ellipse for moving average method. It is a window that will be
averaged when computing grid nodes values.

nearest
Nearest neighbor algorithm. It has following parameters:

• radius1: The first radius (X axis if rotation angle is 0) of search ellipse. Set this parameter to zero
to use whole point array. Default is 0.0.

• radius2: The second radius (Y axis if rotation angle is 0) of search ellipse. Set this parameter to
zero to use whole point array. Default is 0.0.

• radius: Set first and second radius (mutually exclusive with radius1 and radius2). Default is 0.0.
Added in GDAL 3.6

• angle: Angle of search ellipse rotation in degrees (counter clockwise, default 0.0).

• nodata: NODATA marker to fill empty points (default 0.0).

linear
New in version 2.1.

Linear interpolation algorithm.

The Linear method performs linear interpolation by computing a Delaunay triangulation of the point cloud,
finding in which triangle of the triangulation the point is, and by doing linear interpolation from its
barycentric coordinates within the triangle. If the point is not in any triangle, depending on the
radius, the algorithm will use the value of the nearest point or the nodata value.

It has following parameters:

• radius: In case the point to be interpolated does not fit into a triangle of the Delaunay
triangulation, use that maximum distance to search a nearest neighbour, or use nodata otherwise. If set
to -1, the search distance is infinite. If set to 0, nodata value will be always used. Default is -1.

• nodata: NODATA marker to fill empty points (default 0.0).

DATA METRICS

Besides the interpolation functionality gdal_grid can be used to compute some data metrics using the
specified window and output grid geometry. These metrics are:

• minimum: Minimum value found in grid node search ellipse.

• maximum: Maximum value found in grid node search ellipse.

• range: A difference between the minimum and maximum values found in grid node search ellipse.

• count: A number of data points found in grid node search ellipse.

• average_distance: An average distance between the grid node (center of the search ellipse) and all of
the data points found in grid node search ellipse.

• average_distance_pts: An average distance between the data points found in grid node search ellipse.
The distance between each pair of points within ellipse is calculated and average of all distances is
set as a grid node value.

All the metrics have the same set of options:

• radius1: The first radius (X axis if rotation angle is 0) of search ellipse. Set this parameter to zero
to use whole point array. Default is 0.0.

• radius2: The second radius (Y axis if rotation angle is 0) of search ellipse. Set this parameter to
zero to use whole point array. Default is 0.0.

• radius: Set first and second radius (mutually exclusive with radius1 and radius2). Default is 0.0.
Added in GDAL 3.6

• angle: Angle of search ellipse rotation in degrees (counter clockwise, default 0.0).

• nodata: NODATA marker to fill empty points (default 0.0).

READING COMMA SEPARATED VALUES

       Often  you  have a text file with a list of comma separated XYZ values to work with (so called CSV file).
       You can easily use that kind of data source in gdal_grid. All you need is to  create  a  virtual  dataset
       header  (VRT)  for your CSV file and use it as an input datasource for gdal_grid. You can find details on
       the VRT format on the VRT -- Virtual Format description page.

       Here is a small example. Let's say we have a CSV file called dem.csv containing

          Easting,Northing,Elevation
          86943.4,891957,139.13
          87124.3,892075,135.01
          86962.4,892321,182.04
          87077.6,891995,135.01
          ...

       For the above data we will create a dem.vrt header with the following content:

          <OGRVRTDataSource>
              <OGRVRTLayer name="dem">
                  <SrcDataSource>dem.csv</SrcDataSource>
                  <GeometryType>wkbPoint</GeometryType>
                  <GeometryField encoding="PointFromColumns" x="Easting" y="Northing" z="Elevation"/>
              </OGRVRTLayer>
          </OGRVRTDataSource>

       This description specifies so called 2.5D geometry with  three  coordinates X,  Y and Z. The Z value will
       be used for interpolation. Now you can use dem.vrt with all OGR programs (start  with  ogrinfo  to   test
       that  everything works fine). The datasource will contain a single layer called "dem"  filled  with point
       features constructed from values in the CSV file.  Using this technique you can handle CSV   files   with
       more  than  three columns, switch columns, etc. OK, now the final step:

          gdal_grid dem.vrt demv.tif

       Or, if we do not wish to use a VRT file:

          gdal_grid -l dem -oo X_POSSIBLE_NAMES=Easting \
          -oo Y_POSSIBLE_NAMES=Northing -zfield Elevation dem.csv dem.tif

       If  your CSV file does not contain column headers then it can be handled in the VRT file in the following
       way:

          <GeometryField encoding="PointFromColumns" x="field_1" y="field_2" z="field_3"/>

       The Comma Separated Value (.csv) description page contains details on CSV format supported by GDAL/OGR.

CREATING MULTIBAND FILES

       Creating multiband files is not directly possible with gdal_grid.  One might use gdal_grid multiple times
       to create one band per file, and then use gdalbuildvrt -separate and then gdal_translate:

          gdal_grid ... 1.tif; gdal_grid ... 2.tif; gdal_grid ... 3.tif
          gdalbuildvrt -separate 123.vrt 1.tif 2.tif 3.tif
          gdal_translate 123.vrt 123.tif

       Or just use gdal_merge, to combine the one-band files into a single one:

          gdal_grid ... a.tif; gdal_grid ... b.tif; gdal_grid ... c.tif
          gdal_merge -separate a.tif b.tif c.tif -o d.tif

C API

       This utility is also callable from C with GDALGrid().

EXAMPLES

       The following would create raster TIFF file from VRT datasource  described  in  Reading  comma  separated
       values  section  using the inverse distance to a power method.  Values to interpolate will be read from Z
       value of geometry record.

          gdal_grid -a invdist:power=2.0:smoothing=1.0 -txe 85000 89000 -tye 894000 890000 \
              -outsize 400 400 -of GTiff -ot Float64 -l dem dem.vrt dem.tiff

       The next command does the same thing as the previous one,  but  reads  values  to  interpolate  from  the
       attribute  field  specified  with  -zfield  option  instead  of  geometry record. So in this case X and Y
       coordinates are being taken from geometry  and  Z  is  being  taken  from  the  "Elevation"  field.   The
       GDAL_NUM_THREADS is also set to parallelize the computation.

          gdal_grid -zfield "Elevation" -a invdist:power=2.0:smoothing=1.0 -txe 85000 89000 \
              -tye 894000 890000 -outsize 400 400 -of GTiff -ot Float64 -l dem dem.vrt \
              dem.tiff --config GDAL_NUM_THREADS ALL_CPUS

AUTHOR

       Andrey Kiselev <dron@ak4719.spb.edu>

COPYRIGHT

       1998-2025

                                                  Feb 11, 2025                                      GDAL_GRID(1)