Ubuntu Manpage: bundle-install - Install the dependencies specified in your Gemfile

NAME

       bundle-install - Install the dependencies specified in your Gemfile

SYNOPSIS

       bundle    install    [--binstubs[=DIRECTORY]]    [--clean]   [--deployment]   [--frozen]   [--full-index]
       [--gemfile=GEMFILE] [--jobs=NUMBER] [--local] [--no-cache] [--no-prune]  [--path  PATH]  [--prefer-local]
       [--quiet]   [--redownload]   [--retry=NUMBER]   [--shebang=SHEBANG]   [--standalone[=GROUP[   GROUP...]]]
       [--system] [--trust-policy=TRUST-POLICY]  [--target-rbconfig=TARGET-RBCONFIG]  [--with=GROUP[  GROUP...]]
       [--without=GROUP[ GROUP...]]

DESCRIPTION

       Install  the  gems  specified in your Gemfile(5). If this is the first time you run bundle install (and a
       Gemfile.lock does not exist), Bundler will fetch all remote sources, resolve dependencies and install all
       needed gems.

       If a Gemfile.lock does exist, and you have not updated your Gemfile(5), Bundler  will  fetch  all  remote
       sources, but use the dependencies specified in the Gemfile.lock instead of resolving dependencies.

       If  a Gemfile.lock does exist, and you have updated your Gemfile(5), Bundler will use the dependencies in
       the Gemfile.lock for all gems that you did not update, but will re-resolve the dependencies of gems  that
       you  did  update.  You  can  find  more  information  about  this update process below under CONSERVATIVE
       UPDATING.

OPTIONS

The --clean, --deployment, --frozen, --no-prune, --path, --shebang, --system, --without and --with
options are deprecated because they only make sense if they are applied to every subsequent bundle
install run automatically and that requires bundler to silently remember them. Since bundler will no
longer remember CLI flags in future versions, bundle config (see bundle-config(1)) should be used to
apply them permanently.

--binstubs[=BINSTUBS]
Binstubs are scripts that wrap around executables. Bundler creates a small Ruby file (a binstub)
that loads Bundler, runs the command, and puts it in bin/. This lets you link the binstub inside
of an application to the exact gem version the application needs.

Creates a directory (defaults to ~/bin when the option is used without a value, or to the given
<BINSTUBS> directory otherwise) and places any executables from the gem there. These executables
run in Bundler's context. If used, you might add this directory to your environment's PATH
variable. For instance, if the rails gem comes with a rails executable, this flag will create a
bin/rails executable that ensures that all referred dependencies will be resolved using the
bundled gems.

--clean
On finishing the installation Bundler is going to remove any gems not present in the current
Gemfile(5). Don't worry, gems currently in use will not be removed.

This option is deprecated in favor of the clean setting.

--deployment
In deployment mode, Bundler will 'roll-out' the bundle for production or CI use. Please check
carefully if you want to have this option enabled in your development environment.

This option is deprecated in favor of the deployment setting.

--redownload, --force
Force download every gem, even if the required versions are already available locally.

--frozen
Do not allow the Gemfile.lock to be updated after this install. Exits non-zero if there are going
to be changes to the Gemfile.lock.

This option is deprecated in favor of the frozen setting.

--full-index
Bundler will not call Rubygems' API endpoint (default) but download and cache a (currently big)
index file of all gems. Performance can be improved for large bundles that seldom change by
enabling this option.

--gemfile=GEMFILE
The location of the Gemfile(5) which Bundler should use. This defaults to a Gemfile(5) in the
current working directory. In general, Bundler will assume that the location of the Gemfile(5) is
also the project's root and will try to find Gemfile.lock and vendor/cache relative to this
location.

--jobs=<number>, -j=<number>
The maximum number of parallel download and install jobs. The default is the number of available
processors.

--local
Do not attempt to connect to rubygems.org. Instead, Bundler will use the gems already present in
Rubygems' cache or in vendor/cache. Note that if an appropriate platform-specific gem exists on
rubygems.org it will not be found.

--prefer-local
Force using locally installed gems, or gems already present in Rubygems' cache or in vendor/cache,
when resolving, even if newer versions are available remotely. Only attempt to connect to
rubygems.org for gems that are not present locally.

--no-cache
Do not update the cache in vendor/cache with the newly bundled gems. This does not remove any gems
in the cache but keeps the newly bundled gems from being cached during the install.

--no-prune
Don't remove stale gems from the cache when the installation finishes.

This option is deprecated in favor of the no_prune setting.

--path=PATH
The location to install the specified gems to. This defaults to Rubygems' setting. Bundler shares
this location with Rubygems, gem install ... will have gem installed there, too. Therefore, gems
installed without a --path ... setting will show up by calling gem list. Accordingly, gems
installed to other locations will not get listed.

This option is deprecated in favor of the path setting.

--quiet
Do not print progress information to the standard output.

--retry=[<number>]
Retry failed network or git requests for number times.

--shebang=SHEBANG
Uses the specified ruby executable (usually ruby) to execute the scripts created with --binstubs.
In addition, if you use --binstubs together with --shebang jruby these executables will be changed
to execute jruby instead.

This option is deprecated in favor of the shebang setting.

--standalone[=<list>]
Makes a bundle that can work without depending on Rubygems or Bundler at runtime. A space
separated list of groups to install can be specified. Bundler creates a directory named bundle and
installs the bundle there. It also generates a bundle/bundler/setup.rb file to replace Bundler's
own setup in the manner required. Using this option implicitly sets path, which is a [remembered
option][REMEMBERED OPTIONS].

--system
Installs the gems specified in the bundle to the system's Rubygems location. This overrides any
previous configuration of --path.

This option is deprecated in favor of the system setting.

--trust-policy=TRUST-POLICY
Apply the Rubygems security policy policy, where policy is one of HighSecurity, MediumSecurity,
LowSecurity, AlmostNoSecurity, or NoSecurity. For more details, please see the Rubygems signing
documentation linked below in SEE ALSO.

--target-rbconfig=TARGET-RBCONFIG
Path to rbconfig.rb for the deployment target platform.

--with=<list>
A space-separated list of groups referencing gems to install. If an optional group is given it is
installed. If a group is given that is in the remembered list of groups given to --without, it is
removed from that list.

This option is deprecated in favor of the with setting.

--without=<list>
A space-separated list of groups referencing gems to skip during installation. If a group is given
that is in the remembered list of groups given to --with, it is removed from that list.

This option is deprecated in favor of the without setting.

DEPLOYMENT MODE

Bundler's defaults are optimized for development. To switch to defaults optimized for deployment and for
CI, use the --deployment flag. Do not activate deployment mode on development machines, as it will cause
an error when the Gemfile(5) is modified.

1. A Gemfile.lock is required.

To ensure that the same versions of the gems you developed with and tested with are also used in
deployments, a Gemfile.lock is required.

This is mainly to ensure that you remember to check your Gemfile.lock into version control.

2. The Gemfile.lock must be up to date

In development, you can modify your Gemfile(5) and re-run bundle install to conservatively update
your Gemfile.lock snapshot.

In deployment, your Gemfile.lock should be up-to-date with changes made in your Gemfile(5).

3. Gems are installed to vendor/bundle not your default system location

In development, it's convenient to share the gems used in your application with other applications
and other scripts that run on the system.

In deployment, isolation is a more important default. In addition, the user deploying the application
may not have permission to install gems to the system, or the web server may not have permission to
read them.

As a result, bundle install --deployment installs gems to the vendor/bundle directory in the
application. This may be overridden using the --path option.

INSTALLING GROUPS

By default, bundle install will install all gems in all groups in your Gemfile(5), except those declared
for a different platform.

However, you can explicitly tell Bundler to skip installing certain groups with the --without option.
This option takes a space-separated list of groups.

While the --without option will skip installing the gems in the specified groups, it will still download
those gems and use them to resolve the dependencies of every gem in your Gemfile(5).

This is so that installing a different set of groups on another machine (such as a production server)
will not change the gems and versions that you have already developed and tested against.

Bundler offers a rock-solid guarantee that the third-party code you are running in development and
testing is also the third-party code you are running in production. You can choose to exclude some of
that code in different environments, but you will never be caught flat-footed by different versions of
third-party code being used in different environments.

For a simple illustration, consider the following Gemfile(5):

source 'https://rubygems.org'

gem 'sinatra'

group :production do
gem 'rack-perftools-profiler'
end

In this case, sinatra depends on any version of Rack (>= 1.0), while rack-perftools-profiler depends on
1.x (~> 1.0).

When you run bundle install --without production in development, we look at the dependencies of
rack-perftools-profiler as well. That way, you do not spend all your time developing against Rack 2.0,
using new APIs unavailable in Rack 1.x, only to have Bundler switch to Rack 1.2 when the production group
is used.

This should not cause any problems in practice, because we do not attempt to install the gems in the
excluded groups, and only evaluate as part of the dependency resolution process.

This also means that you cannot include different versions of the same gem in different groups, because
doing so would result in different sets of dependencies used in development and production. Because of
the vagaries of the dependency resolution process, this usually affects more than the gems you list in
your Gemfile(5), and can (surprisingly) radically change the gems you are using.

THE GEMFILE.LOCK

When you run bundle install, Bundler will persist the full names and versions of all gems that you used
(including dependencies of the gems specified in the Gemfile(5)) into a file called Gemfile.lock.

Bundler uses this file in all subsequent calls to bundle install, which guarantees that you always use
the same exact code, even as your application moves across machines.

Because of the way dependency resolution works, even a seemingly small change (for instance, an update to
a point-release of a dependency of a gem in your Gemfile(5)) can result in radically different gems being
needed to satisfy all dependencies.

As a result, you SHOULD check your Gemfile.lock into version control, in both applications and gems. If
you do not, every machine that checks out your repository (including your production server) will resolve
all dependencies again, which will result in different versions of third-party code being used if any of
the gems in the Gemfile(5) or any of their dependencies have been updated.

When Bundler first shipped, the Gemfile.lock was included in the .gitignore file included with generated
gems. Over time, however, it became clear that this practice forces the pain of broken dependencies onto
new contributors, while leaving existing contributors potentially unaware of the problem. Since bundle
install is usually the first step towards a contribution, the pain of broken dependencies would
discourage new contributors from contributing. As a result, we have revised our guidance for gem authors
to now recommend checking in the lock for gems.

CONSERVATIVE UPDATING

When you make a change to the Gemfile(5) and then run bundle install, Bundler will update only the gems
that you modified.

In other words, if a gem that you did not modify worked before you called bundle install, it will
continue to use the exact same versions of all dependencies as it used before the update.

Let's take a look at an example. Here's your original Gemfile(5):

source 'https://rubygems.org'

gem 'actionpack', '2.3.8'
gem 'activemerchant'

In this case, both actionpack and activemerchant depend on activesupport. The actionpack gem depends on
activesupport 2.3.8 and rack ~> 1.1.0, while the activemerchant gem depends on activesupport >= 2.3.2,
braintree >= 2.0.0, and builder >= 2.0.0.

When the dependencies are first resolved, Bundler will select activesupport 2.3.8, which satisfies the
requirements of both gems in your Gemfile(5).

Next, you modify your Gemfile(5) to:

source 'https://rubygems.org'

gem 'actionpack', '3.0.0.rc'
gem 'activemerchant'

The actionpack 3.0.0.rc gem has a number of new dependencies, and updates the activesupport dependency to
= 3.0.0.rc and the rack dependency to ~> 1.2.1.

When you run bundle install, Bundler notices that you changed the actionpack gem, but not the
activemerchant gem. It evaluates the gems currently being used to satisfy its requirements:

activesupport 2.3.8
also used to satisfy a dependency in activemerchant, which is not being updated

rack ~> 1.1.0
not currently being used to satisfy another dependency

Because you did not explicitly ask to update activemerchant, you would not expect it to suddenly stop
working after updating actionpack. However, satisfying the new activesupport 3.0.0.rc dependency of
actionpack requires updating one of its dependencies.

Even though activemerchant declares a very loose dependency that theoretically matches activesupport
3.0.0.rc, Bundler treats gems in your Gemfile(5) that have not changed as an atomic unit together with
their dependencies. In this case, the activemerchant dependency is treated as activemerchant 1.7.1 +
activesupport 2.3.8, so bundle install will report that it cannot update actionpack.

To explicitly update actionpack, including its dependencies which other gems in the Gemfile(5) still
depend on, run bundle update actionpack (see bundle update(1)).

Summary: In general, after making a change to the Gemfile(5) , you should first try to run bundle
install, which will guarantee that no other gem in the Gemfile(5) is impacted by the change. If that does
not work, run bundle update(1) bundle-update.1.html.