NAME

       bs11_config - Configuration of BS-11 BTS via RS232

SYNOPSIS

       bs11_config [options] [command]

DESCRIPTION

       bs11_config  is  a small commandline program that can be used to configure the BS-11? BTS using its RS232
       link.

       It can perform a subset of the functions that are  typically  performed  using  the  Siemens  LMT  (Local
       Maintenance Terminal) software, such as

              -      querying some essential configuration values

              -      creating and deleting TRX1 objects

              -      download of SAFETY LOAD software

              -      download of BTS software

              -      creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects)

              -      setting the Tx output power of the RF amplifier

       It is part of the OpenBSC base station controller software from Osmocom.

OPTIONS

       -h,--help
              Print this help text

       -p,--port </dev/ttyXXX>
              Specify serial port

       -s,--software <file>
              Specify Software file

       -S,--safety <file>
              Specify Safety Load file

       -d,--delay <ms>
              Specify delay in milliseconds

       -D,--disconnect
              Disconnect BTS from BSC

       -w,--win-size <num>
              Specify Window Size

       -f,--forced
              Force Software Load

SUPPORTED COMMANDS

       query  Query the BS-11 about serial number and configuration

       disconnect
              Disconnect A-bis link (go into administrative state)

       resconnect
              Reconnect A-bis link (go into normal state)

       restart
              Restart the BTS

       software
              Download Software (only in administrative state)

       create-trx1
              Create objects for TRX1 (Danger: Your BS-11 might overheat)

       delete-trx1
              Delete objects for TRX1

       pll-e1-locked
              Set the PLL to be locked to E1 clock

       pll-standalone
              Set the PLL to be in standalone mode

       pll-setvalue <value>
              Set the PLL set value

       pll-workvalue <value>
              Set the PLL work value

       oml-tei
              Set OML E1 TS and TEI

       bport0-star
              Set BPORT0 line config to star

       bport0-multidrop
              Set BPORT0 line config to multidrop

       bport1-multidrop
              Set BPORT1 line config to multidrop

       create-bport1
              Create BPORT1 object

       delete-bport1
              Delete BPORT1 object

SEE ALSO

       isdnsync(1), osmo-bsc(1)

AUTHOR

       This  manual  page was written by Ruben Undheim <ruben.undheim@gmail.com> for the Debian project (and may
       be used by others).

                                                  12 March 2025                                   BS11_CONFIG(1)