Provided by: gridengine-common_8.1.9+dfsg-12_all 
NAME
bootstrap - Grid Engine bootstrap file
DESCRIPTION
bootstrap contains parameters that are needed for the startup of Grid Engine components. It is created
during the sge_qmaster installation. Modifying bootstrap in a running system is not supported.
FORMAT
The paragraphs that follow provide brief descriptions of the individual parameters that comprise the
bootstrap configuration for a Grid Engine cluster:
admin_user
Administrative user account used by Grid Engine for all internal file handling (status spooling, message
logging, etc.). Can be used in cases where the root account does not have the corresponding file access
permissions (e.g. on a shared file system without global root read/write access).
As a parameter set at installation time, changing admin_user in a running system is not supported.
Changing it manually on a shut-down cluster is possible, but if access to the Grid Engine spooling area
is interrupted, this will result in unpredictable behavior.
The admin_user parameter has no default value, but instead it is defined during the master installation
procedure.
default_domain
Only needed if your Grid Engine cluster covers hosts belonging to more than a single DNS domain. In this
case it can be used if your hostname resolving yields both qualified and unqualified hostnames for the
hosts in one of the DNS domains. The value of default_domain is appended to the unqualified hostname to
define a fully qualified hostname. The default_domain parameter will have no effect if ignore_fqdn is
set to "true".
As a parameter set at installation time, changing default_domain in a running system is not supported.
The default for default_domain is "none", in which case it will not be used.
ignore_fqdn
Ignore fully qualified domain name component of hostnames. Should be set if all hosts belonging to a Grid
Engine cluster are part of a single DNS domain. It is switched on if set to either "true" or "1".
Switching it on may solve problems with load reports due to different hostname resolutions across the
cluster.
As a parameter set at installation time, changing ignore_fqdn in a running system is not supported. The
default for ignore_fqdn is "true".
spooling_method
Defines how sge_qmaster(8) writes its configuration and the status information of a running cluster.
The available spooling methods are berkeleydb and classic.
spooling_lib
The name of a shared library containing the spooling_method to be loaded at sge_qmaster(8) initialization
time. The extension characterizing a shared library (.so, .sl, .dylib etc.) is not contained in
spooling_lib.
If spooling_method was set to berkeleydb during installation, spooling_lib is set to libspoolb, and if
classic was chosen as spooling_method, spooling_lib is set to libspoolc.
Not all operating systems allow the dynamic loading of libraries. On these platforms a certain spooling
method (default: berkeleydb) is compiled into the binaries and the parameter spooling_lib will be
ignored.
spooling_params
Defines parameters of the chosen spooling method that are needed to initialize the spooling framework,
e.g. to open database files.
The spooling parameters value for spooling method berkeleydb is
[rpc_server:]database directory[;<options>]
e.g. "/opt/sge/default/spool/qmaster/spooldb" for spooling to a local filesystem, or "myhost:sge" for
spooling over a Berkeley DB RPC server.
rpc_server is obsolete since recent BDB versions don't support RPC and support has been removed from Grid
Engine; it must be replaced if it occurs in an old configuration before an upgrade. database directory
is the directory containing the spool files, and options is a list of options for the database.
Currently the only valid value for options is private, which means to open the database with the
DB_PRIVATE flag to specify that it is only accessed by a single process. This allows the database
directory to be on an NFSv3 filesystem (as opposed to an NFSv4 one, which is otherwise necessary), but it
is unsafe to access it with any other program. In particular, this means that the backup script
(inst_sge -bup), similar scripts using the DB utilities, spooledit etc., must not be used while qmaster
is running with berkeleydb spooling.
For spooling method classic the spooling parameters take the form <common_dir>;<qmaster spool dir>, e.g.
/sge/default/common;/sge/default/spool/qmaster
binary_path
The directory path where the Grid Engine binaries reside. It is used within Grid Engine components to
locate and startup other Grid Engine programs.
The path name given here is searched for binaries as well as any directory below with a directory name
equal to the current operating system architecture. Therefore, /usr/SGE/bin will work for all
architectures, if the corresponding binaries are located in subdirectories named aix51, lx-amd64, lx-x86,
hp11, hp11-64, sol-amd64, sol-sparc etc.
The default location for the binary path is <sge_root>/bin
qmaster_spool_dir
The location where the master spool directory resides. Only the sge_qmaster(8) and sge_shadowd(8) need to
have access to this directory. The master spool directory - in particular the job_scripts directory and
the messages log file - may become quite large, depending on the size of the cluster and the number of
jobs. Be sure to allocate enough disk space and regularly clean off the log files, e.g. via a cron(8)
job.
As a parameter set at installation time, changing qmaster_spool_dir in a running system is not supported.
The default location for the master spool directory is <sge_root>/<cell>/spool/qmaster.
security_mode
The security mode defines the set of security features the installed cluster is using, as a comma-
separated list.
Possible security mode settings are "none", "afs", "dce", "kerberos", "csp", "munge" (no additional
security, AFS, DCE/GSSAPI, Kerberos/GSSAPI, X.509 certificate-based security, and MUNGE authentication
⟨http://munge.googlecode.com/⟩). Their availability depends on how Grid Engine was built/installed.
The "dce" and "kerberos" methods are nearly equivalent, calling the GSSAPI security modules in the same
way, whether they were built for Kerberos/GSSAPI or DCE/GSSAPI, except that "dce" runs the program
$SGE_ROOT/utilbin/$ARCH/starter_cred as a wrapper for the shepherd unless NO_SECURITY is specified in
execd_params in sge_conf(5).
Only the CSP and MUNGE methods are currently properly functional and safe (from the point of view of not
exposing credentials generally). Both provide user authentication, preventing impersonation of other
users. CSP requires certificates to be generated for each user and available on each host which the user
can access; it is appropriate for a loosely coupled system, e.g. including desktop systems, particularly
as it protects the communication stream as well as providing authentication. MUNGE is appropriate in the
security domain of a tightly coupled system, such as a normal cluster, and allows operation with
enforce_user=auto (see sge_conf(5);) it requires the munged daemon to be running on each host, with a
shared secret and doesn't encrypt the communication.
NB. Do not use AFS security without some means of user authentication, otherwise it is possible to
submit jobs as another user and steal their credential from a job running on the same node.
listener_threads
The number of listener threads (defaults set by installation). Increasing this and/or worker_threads
(below) to use additional cores/hardware threads on the master host may improve performance in demanding
cases.
worker_threads
The number of qmaster worker threads (defaults set by installation).
scheduler_threads
The number of qmaster scheduler threads (allowed: 0-1, default set by installation: 1, off: 0; see
qconf(1) -kt/-at option).
jvm_threads
The number of JVM threads (allowed: 0-1, default set by installation, off: 0).
COPYRIGHT
See sge_intro(1) for a full statement of rights and permissions.
SGE 8.1.3pre 2012-04-26 BOOTSTRAP(5)