Provided by: tklib_0.9-1_all 
NAME
canvas::edit::points - Editing a cloud of points on a canvas
SYNOPSIS
package require Tcl 8.5
package require Tk 8.5
package require canvas::edit::points ?0.3?
::canvas::edit points objectName canvas options...
objectName destroy
objectName enable
objectName disable
objectName active
objectName add x y
objectName clear
activeCmd editorObj id
createCmd canvas x y
dataCmd add editorObj id x y
dataCmd remove editorObj id
dataCmd move start editorObj id
dataCmd move delta editorObj id x y dx dy
dataCmd move done editorObj id
________________________________________________________________________________________________________________
DESCRIPTION
This package provides a class whose instances handle editing a cloud of point markers on a canvas.
Instances can be configured with regard to the visual appearance of markers. Note that instances do not
store the edited points themselves, but delegate this to a configurable object.
INTERACTION
The default bindings enable the creation, removal and dragging of point (markers) using the mouse buttons
1, 2, and 3. Specifically:
[1] Clicking anywhere with button 1 adds a new point.
[2] Clicking on a point with button 2 removes that point.
[3] Clicking on a point with button 3 starts a drag operation ending with the release of the button.
The option -drag-point can be used to change the button used to initiate drag operations. Note that the
option value may not only contain the button number, but also modifier prefix separated from the button
by a dash "-". The recognized modifiers are Control, Shift, and Alt.
The option -add-remove-point can be used to change the button used to add/remove points. This works
because removal is an item binding, while adding is canvas global. The option recognizes the same syntax
for button as -drag-point.
In the standard configuration the canvas item representing a point is a circle configured using the
appearance options -color, -hilit-color, and -radius. Their defaults are Skyblue2, red, and 3,
repsectively.
The option -kind can be used to slightly customize the canvas item to any kind accepting the item options
-width, -outline, -fill, and -activefill.
For more extensive customization its is necessary to configure a creation callback using option -create-
cmd. The callback takes the canvas and x. y coordinates as arguments, in this order, and is expected to
return a list of the canvas items representing the point.
Note the plural. With the callback it is possible to visualize a point using a group of items.
Further note that when the callback return an empty list no point is created. In other words, the
callback can also be used to perform checks if a point at the given location is desirable, or not. This
can be combined with the default creation behaviour as the option can be queried, and its default value
is the callback for the default behaviour.
Keeping with the callback for a bit, the option -active-cmd sets a callback invoked whenever the mouse is
over one of the created points, i.e. active. This can be used to drive derived displays. For example
highlighting the point's entry in a table or other widget.
The last option of importance is -tag. Its value is the name of the canvas tag used to mark all the items
owned, i.e. created and managed by an. The default is POINT.
When attaching multiple instances of this behaviour to the same canvas each instance has to be configured
with a unique tag, to prevent them from interfering with each other.
CLASS API
::canvas::edit points objectName canvas options...
This, the class command, creates and configures a new instance of a point cloud editor, named
objectName. The instance will be connected to the specified canvas widget.
The result of the command is the fully qualified name of the instance command.
The options accepted here, and their values, are explained in the section Options.
INSTANCE API
Instances of the point cloud editors provide the following API:
objectName destroy
This method destroys the point cloud editor and releases all its internal resources.
Note that this operation does not destroy the items of the point markers the editor managed on the
attached canvas, nor the canvas itself.
The result of the method is an empty string.
objectName enable
This method activates editing of the point cloud on the canvas. This is the default after instance
creation. A call is ignored if the editor is already active.
The result of the method is an empty string.
The complementary method is disable. The interogatory method for the current state is active.
objectName disable
This method disables editing of the point cloud on the canvas. A call is ignored if the editor is
already disabled.
The result of the method is an empty string.
The complementary method is enable. The interogatory method for the current state is active.
objectName active
This method queries the editor state.
The result of the method is a boolean value, true if the editor is active, and false otherwise,
i.e. disabled.
The methods to change the state are enable and disable.
objectName add x y
This method programmatically creates a point at the specified location.
The result of the method is an empty string.
Note that this method goes through the whole set of callbacks invoked when the user interactively
creates a point, i.e. -create-cmd, and, more importantly, -data-cmd.
This is the method through which to load pre-existing points into an editor instance.
objectName clear
This method programmatically removes all points from the editor.
The result of the method is an empty string.
Note that this method goes through the same callback invoked when the user interactively removes a
point, i.e. -data-cmd.
OPTIONS
The class command accepts the following options
-active-cmd command-prefix
The value of this option is a command prefix the editor will invoke when the mouse enters or
leaves a point managed by the instance.
If not specified it defaults to an empty command which does nothing.
The signature of this command prefix is
activeCmd editorObj id
The id identifies the point within the editor.
An empty id indicates that the last entered point was left.
The result of this method is ignored.
-add-remove-point eventspec
The value of this option is an event specification (without bracketing angles) declaring which
event will trigger adding and removing a point.
This option can only be set at construction time.
The default setup uses different events for adding and removing points, ButtonPress-1 and
ButtonPress-2 respectively.
When using this option the same event is used for both operations. This is no problem because
adding is bound as canvas-global event while removal is bound to the relevant canvas items.
-color colorspec
The value of this option is the fill color for the default item created when adding a point, and
no -create-cmd is specified.
The default value is SkyBlue2.
-create-cmd command-prefix
The value of this option is a command prefix the editor will invoke when it has to create a new
point.
While this option can be set after construction, it is recommended to use this feature only as a
means of inserting custom processing to be done at creation time which remembers and calls the
previous value of the option.
If not specified it defaults to a command which will create a black-bordered blue circle of radius
3 centered on the location of the new point.
The signature of this command prefix is
createCmd canvas x y
The result of the command prefix must be a list of the canvas items it created to represent
the marker. Note here that the visual representation of a "point" may consist of multiple
canvas items in an arbitrary shape.
The returned list of items is allowed to be empty, and such is taken as signal that the
callback vetoed the creation of the point.
-data-cmd command-prefix
The value of this option is a command prefix the editor will invoke when a point was edited in
some way. This is how the editor delegates the actual storage of point information to an outside
object.
This option can only be set at construction time.
If not specified it defaults to an empty string and is ignored by the editor, i.e. not invoked.
The signatures of this command prefix are
dataCmd add editorObj id x y
This callback is invoked when a new point was added to the instance, either interactively,
or programmatically. See instance method add for the latter.
The id identifies the point within the editor and will be used by the two other callbacks
to specify which point to modify.
The last two arguments x and y specify the location of the new point in canvas coordinates.
The result of this method is ignored.
dataCmd remove editorObj id
This callback is invoked when a point removed from the editor instance.
The id identifies the removed point within the editor.
The result of this method is ignored.
dataCmd move start editorObj id
This callback is invoked when the movement of a point in the editor instance has started.
The id identifies the point within the editor about to be moved.
The result of this method is ignored.
dataCmd move delta editorObj id x y dx dy
This callback is invoked when the point moved in the editor instance.
The id identifies the moved point within the editor, and the remaining arguments x, y, dx,
and dy provide the new absolute location of the point, and full delta to the original
location.
At the time of the calls the system is not committed to the move yet. Only after method
move done was invoked and has accepted or rejected the last position will the editor update
its internal data structures, either committing to the new location, or rolling the move
back to the original one.
Given this the location data provided here should be saved only in temporary storage until
then.
The result of this method is ignored.
dataCmd move done editorObj id
This callback is invoked when the movement of a point in the editor instance is complete.
The id identifies the moved point within the editor.
The result of this method must be a boolean value. If the method returns false the move is
vetoed and rollbed back.
-drag-point eventspec
The value of this option is an event specification (without bracketing angles) declaring which
event will trigger a drag action on points.
This option can only be set at construction time.
The default specification is ButtonPress-3.
-hilit-color colorspec
The value of this option is the highlight color for the default item created when adding a point,
and no -highlight-cmd is specified.
The default value is red.
-kind name
The value of this option is the canvas item type for the default item created when adding a point,
and no -create-cmd is specified. Only item types specified through a bounding box are suitable.
The default value is oval.
-radius int
The value of this option is the radius for the default item created when adding a point, and no
-create-cmd is specified.
The default value is 3.
-tag string
The value of this option is the name of the canvas tag with which to identify all items of all
points managed by the editor.
This option can only be set at construction time.
If not specified it defaults to POINT
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain bugs and other problems. Please
report such in the category canvas of the Tklib Trackers [http://core.tcl.tk/tklib/reportlist]. Please
also report any ideas for enhancements you may have for either package and/or documentation.
KEYWORDS
canvas, editing, point cloud, points
tklib 0.3 canvas::edit::points(3tk)