Provided by: libio-async-perl_0.803-1_all 
NAME
"IO::Async::Routine" - execute code in an independent sub-process or thread
SYNOPSIS
use IO::Async::Routine;
use IO::Async::Channel;
use IO::Async::Loop;
my $loop = IO::Async::Loop->new;
my $nums_ch = IO::Async::Channel->new;
my $ret_ch = IO::Async::Channel->new;
my $routine = IO::Async::Routine->new(
channels_in => [ $nums_ch ],
channels_out => [ $ret_ch ],
code => sub {
my @nums = @{ $nums_ch->recv };
my $ret = 0; $ret += $_ for @nums;
# Can only send references
$ret_ch->send( \$ret );
},
on_finish => sub {
say "The routine aborted early - $_[-1]";
$loop->stop;
},
);
$loop->add( $routine );
$nums_ch->send( [ 10, 20, 30 ] );
$ret_ch->recv(
on_recv => sub {
my ( $ch, $totalref ) = @_;
say "The total of 10, 20, 30 is: $$totalref";
$loop->stop;
}
);
$loop->run;
DESCRIPTION
This IO::Async::Notifier contains a body of code and executes it in a sub-process or thread, allowing it
to act independently of the main program. Once set up, all communication with the code happens by values
passed into or out of the Routine via IO::Async::Channel objects.
The code contained within the Routine is free to make blocking calls without stalling the rest of the
program. This makes it useful for using existing code which has no option not to block within an
IO::Async-based program.
To create asynchronous wrappers of functions that return a value based only on their arguments, and do
not generally maintain state within the process it may be more convenient to use an IO::Async::Function
instead, which uses an "IO::Async::Routine" to contain the body of the function and manages the Channels
itself.
Models
A choice of detachment model is available. Each has various advantages and disadvantages. Not all of them
may be available on a particular system.
The "fork" model
The code in this model runs within its own process, created by calling fork() from the main process. It
is isolated from the rest of the program in terms of memory, CPU time, and other resources. Because it is
started using fork(), the initial process state is a clone of the main process.
This model performs well on UNIX-like operating systems which possess a true native fork() system call,
but is not available on "MSWin32" for example, because the operating system does not provide full fork-
like semantics.
The "thread" model
The code in this model runs inside a separate thread within the main process. It therefore shares memory
and other resources such as open filehandles with the main thread. As with the "fork" model, the initial
thread state is cloned from the main controlling thread.
This model is only available on perls built to support threading.
The "spawn" model
Since version 0.79.
The code in this model runs within its own freshly-created process running another copy of the perl
interpreter. Similar to the "fork" model it therefore has its own memory, CPU time, and other resources.
However, since it is started freshly rather than by cloning the main process, it starts up in a clean
state, without any shared resources from its parent.
Since this model creates a new fresh process rather than sharing existing state, it cannot use the "code"
argument to specify the routine body; it must instead use only the "module" and "func" arguments.
In the current implementation this model requires exactly one input channel and exactly one output
channel; both must be present, and there cannot be more than one of either.
EVENTS
on_finish $exitcode
For fork()-based Routines, this is invoked after the process has exited and is passed the raw exitcode
status.
on_finish $type, @result
For thread-based Routines, this is invoked after the thread has returned from its code block and is
passed the "on_joined" result.
As the behaviour of these events differs per model, it may be more convenient to use "on_return" and
"on_die" instead.
on_return $result
Invoked if the code block returns normally. Note that fork()-based Routines can only transport an integer
result between 0 and 255, as this is the actual exit() value.
on_die $exception
Invoked if the code block fails with an exception.
PARAMETERS
The following named parameters may be passed to "new" or "configure":
model => "fork" | "thread" | "spawn"
Optional. Defines how the routine will detach itself from the main process. See the "Models" section
above for more detail.
If the model is not specified, the environment variable "IO_ASYNC_ROUTINE_MODEL" is used to pick a
default. If that isn't defined, "fork" is preferred if it is available, otherwise "thread".
channels_in => ARRAY of IO::Async::Channel
ARRAY reference of IO::Async::Channel objects to set up for passing values in to the Routine.
channels_out => ARRAY of IO::Async::Channel
ARRAY reference of IO::Async::Channel objects to set up for passing values out of the Routine.
code => CODE
CODE reference to the body of the Routine, to execute once the channels are set up.
When using the "spawn" model, this is not permitted; you must use "module" and "func" instead.
module => STRING
func => STRING
Since version 0.79.
An alternative to the "code" argument, which names a module to load and a function to call within it.
"module" should give a perl module name (i.e. "Some::Name", not a filename like Some/Name.pm), and
"func" should give the basename of a function within that module (i.e. without the module name prefixed).
It will be invoked as the main code body of the object, and passed in a list of all the channels; first
the input ones then the output ones.
module::func( @channels_in, @channels_out );
setup => ARRAY
Optional. For fork()-based Routines, gives a reference to an array to pass to the underlying "Loop"
"fork_child" method. Ignored for thread-based Routines.
METHODS
id
$id = $routine->id;
Returns an ID string that uniquely identifies the Routine out of all the currently-running ones. (The ID
of already-exited Routines may be reused, however.)
model
$model = $routine->model;
Returns the detachment model in use by the Routine.
kill
$routine->kill( $signal );
Sends the specified signal to the routine code. This is either implemented by CORE::kill() or
"threads::kill" as required. Note that in the thread case this has the usual limits of signal delivery to
threads; namely, that it works at the Perl interpreter level, and cannot actually interrupt blocking
system calls.
result_future
$f = $routine->result_future;
Since version 0.75.
Returns a new "IO::Async::Future" which will complete with the eventual return value or exception when
the routine finishes.
If the routine finishes with a successful result then this will be the "done" result of the future. If
the routine fails with an exception then this will be the "fail" result.
AUTHOR
Paul Evans <leonerd@leonerd.org.uk>
perl v5.38.2 2024-02-04 IO::Async::Routine(3pm)