NAME

       BIO_s_connect, BIO_new_connect, BIO_set_conn_hostname, BIO_set_conn_port, BIO_set_conn_address,
       BIO_set_conn_ip_family, BIO_get_conn_hostname, BIO_get_conn_port, BIO_get_conn_address,
       BIO_get_conn_ip_family, BIO_set_nbio, BIO_set_sock_type, BIO_get_sock_type, BIO_get0_dgram_bio,
       BIO_do_connect - connect BIO

SYNOPSIS

        #include <openssl/bio.h>

        const BIO_METHOD *BIO_s_connect(void);

        BIO *BIO_new_connect(const char *name);

        long BIO_set_conn_hostname(BIO *b, char *name);
        long BIO_set_conn_port(BIO *b, char *port);
        long BIO_set_conn_address(BIO *b, BIO_ADDR *addr);
        long BIO_set_conn_ip_family(BIO *b, long family);
        const char *BIO_get_conn_hostname(BIO *b);
        const char *BIO_get_conn_port(BIO *b);
        const BIO_ADDR *BIO_get_conn_address(BIO *b);
        const long BIO_get_conn_ip_family(BIO *b);

        long BIO_set_nbio(BIO *b, long n);

        int BIO_set_sock_type(BIO *b, int sock_type);
        int BIO_get_sock_type(BIO *b);
        int BIO_get0_dgram_bio(BIO *B, BIO **dgram_bio);

        long BIO_do_connect(BIO *b);

DESCRIPTION

       BIO_s_connect() returns the connect BIO method. This is a wrapper round the platform's TCP/IP socket
       connection routines.

       Using connect BIOs, TCP/IP connections can be made and data transferred using only BIO routines. In this
       way any platform specific operations are hidden by the BIO abstraction.

       Read and write operations on a connect BIO will perform I/O on the underlying connection. If no
       connection is established and the port and hostname (see below) is set up properly then a connection is
       established first.

       Connect BIOs support BIO_puts() and BIO_gets().

       If the close flag is set on a connect BIO then any active connection is shutdown and the socket closed
       when the BIO is freed.

       Calling BIO_reset() on a connect BIO will close any active connection and reset the BIO into a state
       where it can connect to the same host again.

       BIO_new_connect() combines BIO_new() and BIO_set_conn_hostname() into a single call: that is it creates a
       new connect BIO with hostname name.

       BIO_set_conn_hostname() uses the string name to set the hostname.  The hostname can be an IP address; if
       the address is an IPv6 one, it must be enclosed in brackets "[" and "]".  The hostname can also include
       the port in the form hostname:port; see BIO_parse_hostserv(3) and BIO_set_conn_port() for details.

       BIO_set_conn_port() sets the port to port. port can be the numerical form or a service string such as
       "http", which will be mapped to a port number using the system function getservbyname().

       BIO_set_conn_address() sets the address and port information using a BIO_ADDR(3ssl).

       BIO_set_conn_ip_family() sets the IP family.

       BIO_get_conn_hostname() returns the hostname of the connect BIO or NULL if the BIO is initialized but no
       hostname is set.  This return value is an internal pointer which should not be modified.

       BIO_get_conn_port() returns the port as a string.  This return value is an internal pointer which should
       not be modified.

       BIO_get_conn_address() returns the address information as a BIO_ADDR.  This return value is an internal
       pointer which should not be modified.

       BIO_get_conn_ip_family() returns the IP family of the connect BIO.

       BIO_set_nbio() sets the non blocking I/O flag to n. If n is zero then blocking I/O is set. If n is 1 then
       non blocking I/O is set. Blocking I/O is the default. The call to BIO_set_nbio() should be made before
       the connection is established because non blocking I/O is set during the connect process.

       BIO_do_connect() attempts to connect the supplied BIO.  This performs an SSL/TLS handshake as far as
       supported by the BIO.  For non-SSL BIOs the connection is done typically at TCP level.  If domain name
       resolution yields multiple IP addresses all of them are tried after connect() failures.  The function
       returns 1 if the connection was established successfully.  A zero or negative value is returned if the
       connection could not be established.  The call BIO_should_retry() should be used for non blocking connect
       BIOs to determine if the call should be retried.  If a connection has already been established this call
       has no effect.

       BIO_set_sock_type() can be used to set a socket type value as would be passed in a call to socket(2). The
       only currently supported values are SOCK_STREAM (the default) and SOCK_DGRAM. If SOCK_DGRAM is
       configured, the connection created is a UDP datagram socket handled via BIO_s_datagram(3).  I/O calls
       such as BIO_read(3) and BIO_write(3) are forwarded transparently to an internal BIO_s_datagram(3)
       instance. The created BIO_s_datagram(3) instance can be retrieved using BIO_get0_dgram_bio() if desired,
       which writes a pointer to the BIO_s_datagram(3) instance to *dgram_bio. The lifetime of the internal
       BIO_s_datagram(3) is managed by BIO_s_connect() and does not need to be freed by the caller.

       BIO_get_sock_type() retrieves the value set using BIO_set_sock_type().

NOTES

       If blocking I/O is set then a non positive return value from any I/O call is caused by an error
       condition, although a zero return will normally mean that the connection was closed.

       If the port name is supplied as part of the hostname then this will override any value set with
       BIO_set_conn_port(). This may be undesirable if the application does not wish to allow connection to
       arbitrary ports. This can be avoided by checking for the presence of the ':' character in the passed
       hostname and either indicating an error or truncating the string at that point.

       The values returned by BIO_get_conn_hostname(), BIO_get_conn_address(), and BIO_get_conn_port() are
       updated when a connection attempt is made.  Before any connection attempt the values returned are those
       set by the application itself.

       Applications do not have to call BIO_do_connect() but may wish to do so to separate the connection
       process from other I/O processing.

       If non blocking I/O is set then retries will be requested as appropriate.

       It addition to BIO_should_read() and BIO_should_write() it is also possible for BIO_should_io_special()
       to be true during the initial connection process with the reason BIO_RR_CONNECT. If this is returned then
       this is an indication that a connection attempt would block, the application should then take appropriate
       action to wait until the underlying socket has connected and retry the call.

       BIO_set_conn_hostname(), BIO_set_conn_port(), BIO_get_conn_hostname(), BIO_set_conn_address(),
       BIO_get_conn_port(), BIO_get_conn_address(), BIO_set_conn_ip_family(), BIO_get_conn_ip_family(),
       BIO_set_nbio(), and BIO_do_connect() are macros.

RETURN VALUES

       BIO_s_connect() returns the connect BIO method.

       BIO_set_conn_address(), BIO_set_conn_port(), and BIO_set_conn_ip_family() return 1 or <=0 if an error
       occurs.

       BIO_set_conn_hostname() returns 1 on success and <=0 on failure.

       BIO_get_conn_address() returns the address information or NULL if none was set.

       BIO_get_conn_hostname() returns the connected hostname or NULL if none was set.

       BIO_get_conn_ip_family() returns the address family or -1 if none was set.

       BIO_get_conn_port() returns a string representing the connected port or NULL if not set.

       BIO_set_nbio() returns 1 or <=0 if an error occurs.

       BIO_do_connect() returns 1 if the connection was successfully established and <=0 if the connection
       failed.

       BIO_set_sock_type() returns 1 on success or 0 on failure.

       BIO_get_sock_type() returns a socket type or 0 if the call is not supported.

       BIO_get0_dgram_bio() returns 1 on success or 0 on failure.

EXAMPLES

       This is example connects to a webserver on the local host and attempts to retrieve a page and copy the
       result to standard output.

        BIO *cbio, *out;
        int len;
        char tmpbuf[1024];

        cbio = BIO_new_connect("localhost:http");
        out = BIO_new_fp(stdout, BIO_NOCLOSE);
        if (BIO_do_connect(cbio) <= 0) {
            fprintf(stderr, "Error connecting to server\n");
            ERR_print_errors_fp(stderr);
            exit(1);
        }
        BIO_puts(cbio, "GET / HTTP/1.0\n\n");
        for (;;) {
            len = BIO_read(cbio, tmpbuf, 1024);
            if (len <= 0)
                break;
            BIO_write(out, tmpbuf, len);
        }
        BIO_free(cbio);
        BIO_free(out);

SEE ALSO

       BIO_ADDR(3), BIO_parse_hostserv(3)

HISTORY

       BIO_set_conn_int_port(), BIO_get_conn_int_port(), BIO_set_conn_ip(), and BIO_get_conn_ip() were removed
       in OpenSSL 1.1.0.  Use BIO_set_conn_address() and BIO_get_conn_address() instead.

       Connect BIOs support BIO_gets() since OpenSSL 3.2.

COPYRIGHT

       Copyright 2000-2024 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not use this file except in compliance
       with the License.  You can obtain a copy in the file LICENSE in the source distribution or at
       <https://www.openssl.org/source/license.html>.

3.4.1                                              2025-04-03                                BIO_S_CONNECT(3SSL)