NAME

       uuu - Freescale/NXP I.MX Chip image deploy tools

DESCRIPTION

       uuu (Universal Update Utility) for nxp imx chips -- lib1.5.201

       uuu [-d -m -v -V -bmap -no-bmap] <bootloader|cmdlists|cmd>

       bootloader
              download bootloader to board by usb

       cmdlist
              run  all  commands  in  cmdlist  file  If  it is path, search uuu.auto in dir If it is zip, search
              uuu.auto in zip

       cmd    Run one command, use -H see detail example: SDPS: boot -f flash.bin

       -d     Daemon mode, wait for forever.

       -v -V  verbose mode, -V enable libusb error\warning info

       -dry   Dry run mode, check if script or cmd correct

       -bmap  Try using .bmap files even if flash commands do not specify them

       -no-bmap
              Ignore .bmap files even if flash commands specify them

       -m <usbpath>
              Only monitor these paths.  -m 1:2 -m 1:3

       -ms <serial_no> Monitor the serial number prefix of the device using 'serial_no'.

       -t <timeout>
              Timeout second for wait known usb device appeared

       -T <timeout>
              Timeout second for wait next known usb device appeared at stage switch

       -e <key=value>
              set environment variable key=value

       -pp <ms>
              usb polling period in milliseconds

       -dm    disable small memory

       uuu -s              Enter shell mode. uuu.inputlog record all input commands

              you can use "uuu uuu.inputlog" next time to run all commands

       uuu -udev           linux: show udev rule to avoid sudo each time uuu -lsusb          List connected know
       devices uuu -IgSerNum       Set windows registry to ignore USB serial number for known uuu devices uuu -h
       show general help uuu -H              show general help and detailed help for commands

       uuu [-d -m -v -bmap -no-bmap] -b[run] <emmc|emmc_all|fat_write|nand|nvme_all|qspi|sd|sd_all|spi_nand|spl>
       arg...

              Run Built-in scripts emmc   burn boot loader to eMMC boot partition

       arg0: _flash.bin
              bootloader

       arg1: _image[Optional]
              image burn to emmc, default is the same as bootloader

       emmc_all
              burn whole image to eMMC

       arg0: _flash.bin
              bootloader, which can extract from wic image

       arg1: _image[Optional]
              wic image burn to emmc.

       fat_write
              update one file in fat partition, require uboot fastboot running in board

       arg0: _image
              image, which cp to fat partition

       arg1: _device
              storage device, mmc\sata

       arg2: _partition
              fat partition number, like 1:1

       arg3: _filename[Optional]
              file name in target fat partition, only support rootdir now

       nand   burn boot loader to NAND flash

       arg0: _flash.bin
              bootloader

       arg1: _image[Optional]
              image burn to nand, default is the same as bootloader

       nvme_all
              burn whole image io nvme storage

       arg0: _flash.bin
              bootloader, which can extract from wic image

       arg1: _image[Optional]
              wic image burn to emmc.

       qspi   burn boot loader to qspi nor flash

       arg0: _flexspi.bin
              bootloader

       arg1: _image[Optional]
              image burn to flexspi, default is the same as bootloader

       sd     burn boot loader to sd card

       arg0: _flash.bin
              bootloader

       arg1: _image[Optional]
              image burn to emmc, default is the same as bootloader

              sd_all burn whole image to sd card

       arg0: _flash.bin
              bootloader, which can extract from wic image

       arg1: _image[Optional]
              wic image burn to emmc.

       spi_nand
              burn boot loader to spi nand flash

       arg0: _flexspi.bin
              bootloader

       arg1: _image[Optional]
              image burn to fspinand, default is the same as bootloader

       spl    boot spl and uboot

              arg0: _flash.bin

       uuu -bshow <emmc|emmc_all|fat_write|nand|nvme_all|qspi|sd|sd_all|spi_nand|spl>

              Show built-in script

       Enjoy auto [tab] command complete by put below script into /etc/bash_completion.d/uuu
         _uuu_autocomplete()

              {

              COMPREPLY=($(/usr/bin/uuu $1 $2 $3))

              } complete -o nospace -F _uuu_autocomplete  uuu

       [?25h

       uuu [-d -m -v -V -bmap -no-bmap] <bootloader|cmdlists|cmd>

       bootloader
              download bootloader to board by usb

       cmdlist
              run all commands in cmdlist file If it is path, search uuu.auto  in  dir  If  it  is  zip,  search
              uuu.auto in zip

       cmd    Run one command, use -H see detail example: SDPS: boot -f flash.bin

       -d     Daemon mode, wait for forever.

       -v -V  verbose mode, -V enable libusb error\warning info

       -dry   Dry run mode, check if script or cmd correct

       -bmap  Try using .bmap files even if flash commands do not specify them

       -no-bmap
              Ignore .bmap files even if flash commands specify them

       -m <usbpath>
              Only monitor these paths.  -m 1:2 -m 1:3

       -ms <serial_no> Monitor the serial number prefix of the device using 'serial_no'.

       -t <timeout>
              Timeout second for wait known usb device appeared

       -T <timeout>
              Timeout second for wait next known usb device appeared at stage switch

       -e <key=value>
              set environment variable key=value

       -pp <ms>
              usb polling period in milliseconds

       -dm    disable small memory

       uuu -s              Enter shell mode. uuu.inputlog record all input commands

              you can use "uuu uuu.inputlog" next time to run all commands

       uuu -udev           linux: show udev rule to avoid sudo each time uuu -lsusb          List connected know
       devices uuu -IgSerNum       Set windows registry to ignore USB serial number for known uuu devices uuu -h
       show general help uuu -H              show general help and detailed help for commands

       uuu [-d -m -v -bmap -no-bmap] -b[run] <emmc|emmc_all|fat_write|nand|nvme_all|qspi|sd|sd_all|spi_nand|spl>
       arg...

              Run Built-in scripts emmc   burn boot loader to eMMC boot partition

       arg0: _flash.bin
              bootloader

       arg1: _image[Optional]
              image burn to emmc, default is the same as bootloader

       emmc_all
              burn whole image to eMMC

       arg0: _flash.bin
              bootloader, which can extract from wic image

       arg1: _image[Optional]
              wic image burn to emmc.

       fat_write
              update one file in fat partition, require uboot fastboot running in board

       arg0: _image
              image, which cp to fat partition

       arg1: _device
              storage device, mmc\sata

       arg2: _partition
              fat partition number, like 1:1

       arg3: _filename[Optional]
              file name in target fat partition, only support rootdir now

       nand   burn boot loader to NAND flash

       arg0: _flash.bin
              bootloader

       arg1: _image[Optional]
              image burn to nand, default is the same as bootloader

       nvme_all
              burn whole image io nvme storage

       arg0: _flash.bin
              bootloader, which can extract from wic image

       arg1: _image[Optional]
              wic image burn to emmc.

       qspi   burn boot loader to qspi nor flash

       arg0: _flexspi.bin
              bootloader

       arg1: _image[Optional]
              image burn to flexspi, default is the same as bootloader

       sd     burn boot loader to sd card

       arg0: _flash.bin
              bootloader

       arg1: _image[Optional]
              image burn to emmc, default is the same as bootloader

              sd_all burn whole image to sd card

       arg0: _flash.bin
              bootloader, which can extract from wic image

       arg1: _image[Optional]
              wic image burn to emmc.

       spi_nand
              burn boot loader to spi nand flash

       arg0: _flexspi.bin
              bootloader

       arg1: _image[Optional]
              image burn to fspinand, default is the same as bootloader

       spl    boot spl and uboot

              arg0: _flash.bin

       uuu -bshow <emmc|emmc_all|fat_write|nand|nvme_all|qspi|sd|sd_all|spi_nand|spl>

              Show built-in script

       Enjoy auto [tab] command complete by put below script into /etc/bash_completion.d/uuu
         _uuu_autocomplete()

              {

              COMPREPLY=($(/usr/bin/uuu $1 $2 $3))

              } complete -o nospace -F _uuu_autocomplete  uuu

       [?25h

Universal Update Utility for nxp imx chips -- ... January 2025                                            UUU(1)