Provided by: stressant_0.7.0_all 
NAME
stressant - Stressant Documentation
SYNOPSIS
stressant [-h] [–version] [–log [PATH]] [–email EMAIL] [–smtpserver HOST] [–smtpuser USERNAME] [–smtppass
PASSWORD] [–no-information] [–no-disk] [–smart] [–diskDevice PATH] [–jobFile PATH] [–overwrite]
[–writeSize SIZE] [–directory PATH] [–diskRuntime DISKRUNTIME] [–no-cpu] [–cpuBurnTime TIME]
[–no-network] [–iperfServer HOST] [–iperfTime TIME]
DESCRIPTION
Stressant is a simple yet complete stress-testing tool that forces a computer to perform a series of test
using well-known Linux software in order to detect possible design or construction failures.
OPTIONS
-h, --help
show this help message and exit
--version
show program’s version number and exit
--logfile <PATH>
write reports to the given logfile (default: stressant-$HOSTNAME.log)
--email EMAIL
send report by email to given address
--smtpserver HOST
SMTP server to use, use a colon to specify the port number if non-default (25). willl attempt
to use STARTTLS to secure the connexion and fail if unsupported (default: deliver using the
–mta command)
--smtpuser USERNAME
username for the SMTP server (default: no user)
--smtppass PASSWORD
password for the SMTP server (default: prompted, if –smtpuser is specified)
--no-information, --information
gather basic information (default: True)
--no-disk, --disk
run disk tests (default: True)
--smart, --no-smart
run SMART tests (default: False)
--diskDevice PATH
device to benchmark (default: /dev/sda)
--jobFile PATH
path to the fio job file to use (default: /usr/share/doc/fio/examples/basic-verify.fio)
--overwrite
actually destroy the given device (default: False)
--writeSize SIZE
size to write to disk, bytes or percentage (default: 100M)
--directory PATH
directory to perform file tests in, created if missing (default: None)
--diskRuntime DISKRUNTIME
upper limit for disk benchmark (default: 1m)
--no-cpu, --cpu
run CPU tests (default: True)
--cpuBurnTime TIME
timeout for CPU burn-in (default: 1m)
--no-network, --network
run network tests (default: True)
--iperfServer HOST
iperf server to use (default: iperf.he.net)
--iperfTime TIME
timeout for iperf test, in seconds (default: 60)
EXAMPLES
Small run load with defaults:
stressant
Very fast test, useful to run if you are worried about crashing the machine:
stressant --writeSize 1M --cpuBurnTime 1s --iperfTime 1
Extensive test with complete disk wipe and SMART long test:
sudo stressant --writeSize 100% --overwrite --cpuBurnTime 24h --smart
# wait for the prescribed time, then show the SMART test results:
sudo smartctl -l selftest
Network test only on dedicated server:
stressant --no-information --no-cpu --no-disk --iperfServer iperf.example.net
Send test results by email:
stressant --email person@example.com
If the mail server refuses mail from your location, you can use another relay (password will be
prompted):
stressant --email person@example.com --smtpserver submission.example.net --smtpuser person --smtppassword
The stressant-meta package also depends on other tools that are not directly called by the automated
script above, but are documented below. The meta-package also suggests many more useful tools.
Wiping disks
DANGER:
Wiping disks, just in case it’s not totally obvious, will DELETE DATA on the given file or device. DO
NOT run ANY command in this section unless you are sure you are writing to the CORRECT DEVICE and that
you REALLY want to DESTROY DATA.
As mentioned above, the stressant commandline tool can be used to directly wipe a disk with the fio(1)
command which is actually a disk-testing command that is abused for that purpose. You may not have fio(1)
installed on your machine, however, so you may also use the venerable badblocks(8) command to test disks,
without wiping them:
badblocks -nsv /dev/sdc
You can also wipe disks with the -w flag:
badblocks -wsv /dev/sdc
Be aware, however, that the effect of this will vary according to the physical medium. For example, data
may be recovered old spinning hard drives (HDD) if only the above technique is used. For that purpose,
you should use a tool like nwipe(1) that erases disks using multiple passes and patterns:
nwipe --autonuke --nogui --method=random --verify=off --logfile=nwipe.log /dev/sdc
Those tools are also ineffective on solid state drives (SSD) as they have a more complex logic layer and
different layout semantics. For this, you need to use a “ATA secure erase” procedure using the hdparm(8)
command:
hdparm --user-master u --security-set-pass Eins /dev/sdc
time hdparm --user-master u --security-erase Eins /dev/sdc
More information about this procedure is available in the ATA wiki.
NOTE:
The “secure erase” procedure basically delegates the task of erasing the data to the disk controler.
Nothing garantees the destruction of that data, short of physical destruction of the drive. See this
discussion for more information.
Benchmarking disks
A good way to test disks is to wipe them, as above, but that’s obviously destructive. Sometimes you might
want to just test the disk’s performance by hand, without wiping anything. Stressant ships with fio(1)
and bonnie++(1) for that purpose. The latter is probably the simplest to use:
bonnie++ -s 4G -d /mnt/disk/ -n 1024
Make sure the file size (-s) is at least twice the main memory (see free -h). The /mnt/disk directory
should be writable by the current user as well.
Stressant itself, when disk tests are enabled, will run the following commands:
dd bs=1M count=512 conv=fdatasync if=/dev/zero of=/mnt/disk/testfile
dd bs=1M count=512 conv=fdatasync if=/mnt/disk/testfile of=/dev/null
hdparm -Tt /dev/disk
smartctl -t long /dev/disk
Those provide a quick overview of basic disk statistics as well.
More elaborate workloads can be done with fio. A simple benchmark could be:
fio --name=stressant --group_reporting --directory=/mnt/disk --size=100M
That is a basic read test. The result here, on a Western Digital Blue M.2 500GB Internal SSD
(WDS500G1B0B) with LUKS encryption, LVM and ext4, looks like:
Run status group 0 (all jobs):
READ: bw=267MiB/s (280MB/s), 267MiB/s-267MiB/s (280MB/s-280MB/s), io=100MiB (105MB), run=374-374msec
Disk stats (read/write):
dm-3: ios=323/0, merge=0/0, ticks=484/0, in_queue=484, util=70.99%, aggrios=511/0, aggrmerge=0/0, aggrticks=764/0, aggrin_queue=764, aggrutil=76.86%
dm-0: ios=511/0, merge=0/0, ticks=764/0, in_queue=764, util=76.86%, aggrios=511/0, aggrmerge=0/0, aggrticks=547/0, aggrin_queue=576, aggrutil=73.55%
sdb: ios=511/0, merge=0/0, ticks=547/0, in_queue=576, util=73.55%
A more realistic workload will ignore the cache (--direct=1), include random (--readwrite=randrw) or
sequential writes (--readwrite=readwrite), and parallelize the test to put more pressure on the disk
(--numjobs=4):
$ fio --name=stressant --group_reporting --directory=test --size=100M --readwrite=randrw --direct=1 --numjobs=4
Run status group 0 (all jobs):
READ: bw=45.8MiB/s (48.0MB/s), 45.8MiB/s-45.8MiB/s (48.0MB/s-48.0MB/s), io=199MiB (209MB), run=4346-4346msec
WRITE: bw=46.2MiB/s (48.5MB/s), 46.2MiB/s-46.2MiB/s (48.5MB/s-48.5MB/s), io=201MiB (211MB), run=4346-4346msec
Disk stats (read/write):
dm-3: ios=49674/50087, merge=0/0, ticks=10028/3912, in_queue=13972, util=97.22%, aggrios=50982/51423, aggrmerge=0/0, aggrticks=10204/3852, aggrin_queue=14092, aggrutil=96.62%
dm-0: ios=50982/51423, merge=0/0, ticks=10204/3852, in_queue=14092, util=96.62%, aggrios=50982/51423, aggrmerge=0/0, aggrticks=9042/2598, aggrin_queue=11224, aggrutil=92.54%
sdb: ios=50982/51423, merge=0/0, ticks=9042/2598, in_queue=11224, util=92.54%
There is, of course, way more information shown by the default fio output, including latency
distribution, but those are the numbers people first look for.
Parameters can be stored in a job file, passed as an argument to fio. Examples are available in
/usr/share/doc/fio/examples.
Stressant itself actually runs the equivalent of this:
fio --name=stressant --group_reporting --runtime=1m <(sed /^filename=/d /usr/share/doc/fio/examples/basic-verify.fio ; echo size=100m) --filename=test
NOTE:
There are many other ways to test disks, obviously. In particular, simple tools like disk-filltest
might be considered for inclusion in the future, provided they enter Debian.
Testing disks
The above actually tests disks in the sense that it looks at its performance, but it’s more a benchmark
than a “test”. For tests, stressant will do a smartctl run if the --smart argument is provided. What it
actually does is:
smartctl -t long /dev/sdX
Then smartctl -l selftest /dev/sdX can be used to track progress.
But this doesn’t work for all drives. For example, it may fail for external USB enclosures.
smartmontools’s NVMe support is particularly limited. nvme-cli might be able to deal with those drives
better. In theory, it should support running tests with:
nvme device-self-test /dev/nvme0
But in practice, that often fails because the devices sometimes do not support self-test at all. You can
look at the smart-log instead:
nvme smart-log /dev/nvme0
If the num_err_log_entries entry is non-zero, you can look at the actual log:
nvme error-log /dev/nvme0
NOTE:
The above doesn’t detail how to interpret the output of those commands, and probably should. Sorry.
Testing flash memory
Flash memory cards are known to sometimes be “fake”, that is, they misreport the actual capacity of the
card or the bandwith available. The stressant distribution therefore recommends a tool called f3 which
allows you to perform tests on the memory card. For example, this is a probe on a honest memory card:
$ sudo f3probe --destructive --time-ops /dev/sdb
F3 probe 6.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.
WARNING: Probing normally takes from a few seconds to 15 minutes, but
it can take longer. Please be patient.
Good news: The device `/dev/sdb' is the real thing
Device geometry:
*Usable* size: 30.00 GB (62916608 blocks)
Announced size: 30.00 GB (62916608 blocks)
Module: 32.00 GB (2^35 Bytes)
Approximate cache size: 0.00 Byte (0 blocks), need-reset=no
Physical block size: 512.00 Byte (2^9 Bytes)
Probe time: 4'57"
Operation: total time / count = avg time
Read: 3.07s / 4815 = 637us
Write: 4'51" / 4192321 = 69us
Reset: 324.5ms / 1 = 324.5ms
WARNING:
As the --destructive flag hints, this will destroy the data on the card, so backup the data elsewhere
before doing those tests.
Note that older versions of f3probe(1) (6.0 or earlier) will have trouble doing its job unless the card
is connected through a USB reader. Newer versions can deal with normal block devices, provided that you
pass the magic --reset-type=2 argument. Here’s such an example, on a fake MicroSD card that is labeled
and announced as 32GB but is actually closer to 16GB:
root@curie:/home/anarcat/backup# ~anarcat/dist/f3/f3probe --destructive --time-ops --reset-type=2 /dev/mmcblk0
F3 probe 6.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.
WARNING: Probing normally takes from a few seconds to 15 minutes, but
it can take longer. Please be patient.
Bad news: The device `/dev/mmcblk0' is a counterfeit of type limbo
You can "fix" this device using the following command:
f3fix --last-sec=30983327 /dev/mmcblk0
Device geometry:
*Usable* size: 14.77 GB (30983328 blocks)
Announced size: 31.25 GB (65536000 blocks)
Module: 32.00 GB (2^35 Bytes)
Approximate cache size: 7.00 MB (14336 blocks), need-reset=no
Physical block size: 512.00 Byte (2^9 Bytes)
Probe time: 2'29"
Operation: total time / count = avg time
Read: 1.57s / 32937 = 47us
Write: 2'27" / 200814 = 736us
Reset: 2us / 2 = 1us
To repair the device, you can repartition it quickly with the f3fix(1) command, as recommended in the
output:
f3fix --last-sec=30983327 /dev/mmcblk0
You will also need to reformat the partition so the new size is taken into account, for example if this
is a FAT32 filesystem:
mkfs.fat /dev/mmcblk0p1
You can also perform bandwidth tests with f3read(1) and f3write(1):
pmount /dev/sdb1
f3write /media/sdb1
f3read /media/sdb1
This allows you to detect hidden caches and fake sizes directly as well.
Network performance testing
The --iperfServer option of stressant runs a bandwidth test against a predefined (or specified) server.
You can, of course, call iPerf directly to run your own client/server tests to find issues in specific
routes on the network. The iperf3 package was chosen over the older iperf because public servers are
available for the test to work automatically. iperf3 also has interesting performance features like
--zerocopy and --file, see iperf3(1) for details.
To run a test, start a server:
iperf3 --server
On another machine, connect to the server:
iperf3 --client 192.0.2.1
This runs a TCP test. You can specify UDP test on the client and disable bandwidth limitations (otherwise
UDP tests are limited to 1 Mbit/s):
iperf3 -c 192.0.2.1 --udp --bandwidth 0
To simulate a DDOS condition, you can try multiple clients and run the test for a longer period:
iperf3 -c 192.0.2.1 -u -b 0 --parallel 50 --time 30
SEE ALSO
hdparm(8), smartctl(8), dd(1), fio(), stress-ng(1), iperf3(1)
AUTHOR
Antoine Beaupre
COPYRIGHT
2023, Antoine Beaupre
??? Feb 09, 2023 STRESSANT(1)