NAME

       smbios-wireless-ctl - src/bin/smbios-wireless-ctl

SYNOPSIS

       smbios-wireless-ctl

OPTIONS

       --version
              show program's version number and exit

       -h, --help
              show this help message and exit

       --info Show wireless configuration (default)

       --boot Set BIOS boot-time setting.

       --no-boot
              Do not set BIOS boot-time setting.

       --runtime
              Set BIOS runtime setting (default).

       --no-runtime, --boot-only, --boot_only
              Do not set BIOS runtime setting.

       --wlan=WLAN
              Set radio runtime status for wireless LAN

       --bt=BT
              Set radio runtime status for Bluetooth

       --wwan=WWAN
              Set radio runtime status for cellular (wireless WAN)

       --uwb=UWB
              Set radio runtime status for UWB

       --wigig=WIGIG
              Set radio runtime status for WiGig

       --sw_wlan=SW_WLAN
              Set hardware switch so that it controls radio for wireless LAN

       --sw_bt=SW_BT
              Set hardware switch so that it controls radio for Bluetooth

       --sw_wwan=SW_WWAN
              Set hardware switch so that it controls radio for cellular (wireless WAN)

       --sw_uwb=SW_UWB
              Set hardware switch so that it controls radio for UWB

       --sw_wigig=SW_WIGIG
              Set hardware switch so that it controls radio for WiGig

       --sw_locator=SW_LOCATOR
              Enable or disable the WIFI locator switch

       --st_wlan
              Get  status  for  wireless  LAN.  0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 =
              unknown.

       --st_bt
              Get status for Bluetooth. 0 = enabled. 1 = disabled. 2  =  not  present.  3  =  unsupported.  4  =
              unknown.

       --st_wwan
              Get  status  for  cellular  (wireless  WAN).  0  =  enabled.  1  =  disabled. 2 = not present. 3 =
              unsupported. 4 = unknown.

       --st_uwb
              Get status for UWB. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown.

       --st_wigig
              Get status for WiGig. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown.

       --st_locator=ST_LOCATOR
              Get status for locator switch

       -v, --verbose
              Display more verbose output.

       -q, --quiet
              Minimize program output. Only errors and warnings are displayed.

       --trace
              Enable verbose function tracing.

       --logconfig=LOGCONFIG
              Specify alternate config log.

       --security-key=SECURITY_KEY
              BIOS pre-calculated security key.

       --password=PASSWORD
              BIOS Setup password for set/activate operations.

       -r, --rawpassword
              Do not auto-convert password to scancodes.

       --memory-dat=MEMORY_DAT
              Path to a memory dump file to use instead of real RAM

       --cmos-dat=CMOS_DAT
              Path to a CMOS dump file to use instead of real CMOS

SEE ALSO

       The full documentation for smbios-wireless-ctl is maintained as  a  Texinfo  manual.   If  the  info  and
       smbios-wireless-ctl programs are properly installed at your site, the command

              info smbios-wireless-ctl

       should give you access to the complete manual.

smbios-wireless-ctl 2.4.3                          March 2025                             SMBIOS-WIRELESS-CTL(1)