Provided by: ruby-combustion_1.3.7-1_all 
NAME
Combustion
Combustion is a library to help you test your Rails Engines in a simple and effective manner, instead of
creating a full Rails application in your spec or test folder.
It allows you to write your specs within the context of your engine, using only the parts of a Rails app
you need.
Usage
Get the gem into either your gemspec or your Gemfile, depending on how you manage your engine's
dependencies:
# gemspec
gem.add_development_dependency 'combustion', '~> 1.3'
# Gemfile
gem 'combustion', '~> 1.3'
In your spec_helper.rb, get Combustion to set itself up - which has to happen before you introduce
rspec/rails and - if being used - capybara/rails. Here's an example within context:
require 'bundler'
Bundler.require :default, :development
# If you're using all parts of Rails:
Combustion.initialize! :all
# Or, load just what you need:
# Combustion.initialize! :active_record, :action_controller
require 'rspec/rails'
# If you're using Capybara:
# require 'capybara/rails'
RSpec.configure do |config|
config.use_transactional_fixtures = true
end
Please note that using :all as an argument for Combustion.initialize! will load all key parts of Rails
that are considered essential for that version. For example: ActiveJob is only loaded for Rails 4.2
onwards, and Sprockets is only loaded for Rails 3.1-6.1 (as it is no longer part of the default set in
7.0).
You'll also want to run the generator that creates a minimal set of files expected by Rails - run this in
the directory of your engine:
combust
# or, if bundling with the git repo:
bundle exec combust
Minitest support is considered to be experimental, but it's certainly working for some
https://github.com/pat/combustion/issues/78. Comments on others' experiences are welcome!
What Combustion is doing is setting up a Rails application at spec/internal - but you only need to add
the files within that directory that you're going to use. Read on for some detail about what that
involves.
If you want to use Cucumber, I recommend starting with these notes in issue #16
https://github.com/pat/combustion/issues/16 from Niklas Cathor.
Configuring a different test app directory
If you want your app to be located somewhere other than spec/internal, then make sure you configure it
before you call Combustion.initialize!:
Combustion.path = 'spec/dummy'
Combustion.initialize! :all
Configuring which Rails modules should be loaded.
By default, Combustion doesn't come with any of the Rails stack. You can customise this though - just
pass in what you'd like loaded to the Combustion.initialize! call:
Combustion.initialize! :active_record, :action_controller,
:action_view, :sprockets
And then in your engine's Gemfile:
group :test do
gem 'activerecord'
gem 'actionpack' # action_controller, action_view
gem 'sprockets'
end
Make sure to specify the appropriate version that you want to use.
ActiveSupport and Railties are always loaded, as they're an integral part of Rails.
Using Models and ActiveRecord
If you're using ActiveRecord, then there are two critical files within your internal Rails app at
spec/internal that you'll need to modify:
• config/database.yml
• db/schema.rb
Both follow the same structure as in any normal Rails application - and the schema file lets you avoid
migrations, as it gets run whenever the test suite starts. Here's a quick sample (note that tables are
overwritten if they already exist - this is necessary):
ActiveRecord::Schema.define do
create_table(:pages, :force => true) do |t|
t.string :name
t.text :content
t.timestamps
end
end
Disabling Database Preparation
If you are preparing your own database manually or through different processes, you can disable different
parts of the setup process by the following flags: :database_reset, :load_schema, and :database_migrate.
All default to true.
Combustion.initialize! :active_record,
:database_reset => false,
:load_schema => false
Configuring Combustion to initialise the test db from a .sql file instead of schema.rb
Name the file structure.sql and configure Combustion to use it before initialising:
Combustion.schema_format = :sql
Combustion.initialize! :all
Any models that aren't provided by your engine should be located at spec/internal/app/models.
Using ActionController and ActionView
You'll only need to add controllers and views to your internal Rails app for whatever you're testing that
your engine doesn't provide - this may be nothing at all, so perhaps you don't even need
spec/internal/app/views or spec/internal/app/controllers directories.
However, if you're doing any testing of your engine's controllers or views, then you're going to need
routes set up for them - so modify spec/internal/config/routes.rb accordingly:
Rails.application.routes.draw do
resources :pages
end
Just like in a standard Rails app, if you have a mounted engine, then its routes are accessible through
whatever it has been loaded as.
Customizing Rails application settings
If you would like to specify any Rails configuration parameter, you can do it without creating any
environment file, simply passing a block to Combustion.initialize! like this:
Combustion.initialize! :all do
config.active_record.whitelist_attributes = false
end
Values given through the initialize! block will be set during Rails initialization process, exactly
before the corresponding environment file inside spec/internals/config/enviroments is loaded (when that
file exists), overriding Combustion's defaults.
Parameters defined in, for instance, spec/internals/config/environments/test.rb, would override
Combustion's defaults and also config settings passed to initialize!.
Using other Rails-focused libraries
Be aware that other gems may require parts of Rails when they're loaded, and this could cause some issues
with Combustion's own setup. You may need to manage the loading yourself by setting :require to false in
your Gemfile for the gem in question, and then requiring it manually in your spec_helper. View issue #33
https://github.com/pat/combustion/issues/33 for an example with FactoryBot.
Environment and Logging
Your tests will execute within the test environment for the internal Rails app - and so logs are
available at spec/internal/log/test.log. You should probably create that log directory so Rails doesn't
complain.
Rack it up
Once you've got this set up, you can fire up your test environment quite easily with Rack - a config.ru
file is provided by the generator. Just run rackup and visit http://localhost:9292 http://localhost:9292.
Get your test on!
Now you're good to go - you can write specs within your engine's spec directory just like you were
testing a full Rails application - models in spec/models, controllers in spec/controllers. If you bring
Capybara into the mix, then the standard helpers from that will be loaded as well.
require 'spec_helper'
describe Page do
describe '#valid' do
it 'requires a name' do
# This is just an example. Go write your own tests!
end
end
end
Compatibility
The current test matrix covers MRI 2.4 to 3.1, and Rails 3.1 to 7.0. It will possibly work on older
versions and other Ruby implementations as well.
You can also use Combustion with multiple versions of Rails to test compatibility across them. Appraisal
https://github.com/thoughtbot/appraisal is a gem that can help with this, and a good starting reference
is the Thinking Sphinx https://github.com/pat/thinking-sphinx test suite, which runs against multiple
versions https://github.com/pat/thinking-sphinx/blob/master/Appraisals of Rails.
Limitations and Known Issues
Combustion is currently written with the expectation it'll be used with RSpec, but others have got it
working with Minitest https://github.com/pat/combustion/issues/78. I'd love to make this more flexible -
if you want to give it a shot before I get around to it, patches are very much welcome.
I've not tried using this with Cucumber, but it should work in theory without too much hassle. Let me
know if I'm wrong!
Contributing
Please note that this project now has a Contributor Code of Conduct
http://contributor-covenant.org/version/1/0/0/. By participating in this project you agree to abide by
its terms.
Contributions are very much welcome - but keep in mind the following:
• Keep patches in a separate branch
• Don't mess with the version or history file. I'll take care of that when the patch is merged in.
The tests are extremely minimal, and patches to extend the suite are especially welcome.
Credits
Copyright (c) 2011-2021, Combustion is developed and maintained by Pat Allan, and is released under the
open MIT Licence. Many thanks to HyperTiny for encouraging its development, and all who have contributed
patches https://github.com/pat/combustion/contributors.
November 2022 COMBUSTION()