NAME

       ao-cal-freq - Calibrate AltOS flight computer frequency

SYNOPSIS

       ao-cal-freq [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device] [-v] [--verbose]
       [-n] [--nosave] [-o cal-value-output-file] [--output cal-value-output-file]

DESCRIPTION

       ao-cal-freq drives the frequency calibration process and saves the result.

OPTIONS

       -T tty-device | --tty tty-device
              This selects which tty device the debugger uses to communicate with the target device. The special
              name  'BITBANG' directs ao-dbg to use the cp2103 connection, otherwise this should be a usb serial
              port connected to a suitable cc1111 debug node.

       -D AltOS-device | --device AltOS-device
              Search for a connected device. This requires an argument of one of the following forms:

              TeleMega:2
              TeleMega
              2

              Leaving out the product name will cause the tool to select a suitable  product,  leaving  out  the
              serial number will cause the tool to match one of the available devices.

       -o cal-value-output-file | --output cal-value-output-file
              Writes the resulting calibration value to the specified file.

       -n | --nosave
              Inhibits  saving  the  calibration value on the device. Necessary for devices which don't have on-
              board configuration storage.

       -v | --verbose
              Makes ao-cal-freq chatty about communication with the target device.

USAGE

       ao-cal-freq opens the target device, interactively calibrates the frequency,  then  shows  the  resulting
       calibration values and (optionally) saves them to configuration memory and/or a file.

AUTHOR

       Keith Packard

                                                   ao-cal-freq                                        AO-LOAD(1)