Provided by: age_1.2.1-1_amd64 
NAME
age - simple, modern, and secure file encryption
SYNOPSIS
age [--encrypt] (-r RECIPIENT | -R PATH)... [--armor] [-o OUTPUT] [INPUT]
age [--encrypt] --passphrase [--armor] [-o OUTPUT] [INPUT]
age --decrypt [-i PATH | -j PLUGIN]... [-o OUTPUT] [INPUT]
DESCRIPTION
age encrypts or decrypts INPUT to OUTPUT. The INPUT argument is optional and defaults to standard input.
Only a single INPUT file may be specified. If -o is not specified, OUTPUT defaults to standard output.
If -p/--passphrase is specified, the file is encrypted with a passphrase requested interactively.
Otherwise, it's encrypted to one or more RECIPIENTS specified with -r/--recipient or
-R/--recipients-file. Every recipient can decrypt the file.
In -d/--decrypt mode, passphrase-encrypted files are detected automatically and the passphrase is
requested interactively. Otherwise, one or more IDENTITIES specified with -i/--identity are used to
decrypt the file.
age encrypted files are binary and not malleable, with around 200 bytes of overhead per recipient, plus
16 bytes every 64KiB of plaintext.
OPTIONS
-o, --output=OUTPUT
Write encrypted or decrypted file to OUTPUT instead of standard output. If OUTPUT already exists
it will be overwritten.
If encrypting without --armor, age will refuse to output binary to a TTY. This can be forced by
specifying - as OUTPUT.
--version
Print the version and exit.
Encryption options
-e, --encrypt
Encrypt INPUT to OUTPUT. This is the default.
-r, --recipient=RECIPIENT
Encrypt to the explicitly specified RECIPIENT. See the RECIPIENTS AND IDENTITIES section for
possible recipient formats.
This option can be repeated and combined with other recipient flags, and the file can be decrypted
by all provided recipients independently.
-R, --recipients-file=PATH
Encrypt to the RECIPIENTS listed in the file at PATH, one per line. Empty lines and lines starting
with # are ignored as comments.
If PATH is -, the recipients are read from standard input. In this case, the INPUT argument must
be specified.
This option can be repeated and combined with other recipient flags, and the file can be decrypted
by all provided recipients independently.
-p, --passphrase
Encrypt with a passphrase, requested interactively from the terminal. age will offer to
auto-generate a secure passphrase.
This option can't be used with other recipient flags.
-a, --armor
Encrypt to an ASCII-only "armored" encoding.
age armor is a strict version of PEM with type AGE ENCRYPTED FILE, canonical "strict" Base64, no
headers, and no support for leading and trailing extra data.
Decryption transparently detects and decodes ASCII armoring.
-i, --identity=PATH
Encrypt to the RECIPIENTS corresponding to the IDENTITIES listed in the file at PATH. This is
equivalent to converting the file at PATH to a recipients file with age-keygen -y and then passing
that to -R/--recipients-file.
For the format of PATH, see the definition of -i/--identity in the Decryption options section.
-e/--encrypt must be explicitly specified when using -i/--identity in encryption mode to avoid
confusion.
-j PLUGIN
Encrypt using the data-less plugin PLUGIN.
This is equivalent to using -i/--identity with a file that contains a single plugin IDENTITY that
encodes no plugin-specific data.
-e/--encrypt must be explicitly specified when using -j in encryption mode to avoid confusion.
Decryption options
-d, --decrypt
Decrypt INPUT to OUTPUT.
If INPUT is passphrase encrypted, it will be automatically detected and the passphrase will be
requested interactively. Otherwise, the IDENTITIES specified with -i/--identity are used.
ASCII armoring is transparently detected and decoded.
-i, --identity=PATH
Decrypt using the IDENTITIES at PATH.
PATH may be one of the following:
a. A file listing IDENTITIES one per line. Empty lines and lines starting with "#" are ignored as
comments.
b. A passphrase encrypted age file, containing IDENTITIES one per line like above. The passphrase
is requested interactively. Note that passphrase-protected identity files are not necessary for
most use cases, where access to the encrypted identity file implies access to the whole system.
c. An SSH private key file, in PKCS#1, PKCS#8, or OpenSSH format. If the private key is
password-protected, the password is requested interactively only if the SSH identity matches the
file. See the SSH keys section for more information, including supported key types.
d. "-", causing one of the options above to be read from standard input. In this case, the INPUT
argument must be specified.
This option can be repeated. Identities are tried in the order in which are provided, and the
first one matching one of the file's recipients is used. Unused identities are ignored, but it is
an error if the INPUT file is passphrase-encrypted and -i/--identity is specified.
-j PLUGIN
Decrypt using the data-less plugin PLUGIN.
This is equivalent to using -i/--identity with a file that contains a single plugin IDENTITY that
encodes no plugin-specific data.
RECIPIENTS AND IDENTITIES
RECIPIENTS are public values, like a public key, that a file can be encrypted to. IDENTITIES are private
values, like a private key, that allow decrypting a file encrypted to the corresponding RECIPIENT.
Native X25519 keys
Native age key pairs are generated with age-keygen(1), and provide small encodings and strong encryption
based on X25519. They are the recommended recipient type for most applications.
A RECIPIENT encoding begins with age1 and looks like the following:
age1gde3ncmahlqd9gg50tanl99r960llztrhfapnmx853s4tjum03uqfssgdh
An IDENTITY encoding begins with AGE-SECRET-KEY-1 and looks like the following:
AGE-SECRET-KEY-1KTYK6RVLN5TAPE7VF6FQQSKZ9HWWCDSKUGXXNUQDWZ7XXT5YK5LSF3UTKQ
An encrypted file can't be linked to the native recipient it's encrypted to without access to the
corresponding identity.
SSH keys
As a convenience feature, age also supports encrypting to RSA or Ed25519 ssh(1) keys. RSA keys must be at
least 2048 bits. This feature employs more complex cryptography, and should only be used when a native
key is not available for the recipient. Note that SSH keys might not be protected long-term by the
recipient, since they are revokable when used only for authentication.
A RECIPIENT encoding is an SSH public key in authorized_keys format (see the AUTHORIZED_KEYS FILE FORMAT
section of sshd(8)), starting with ssh-rsa or ssh-ed25519, like the following:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQDULTit0KUehbi[...]GU4BtElAbzh8=
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIH9pO5pz22JZEas[...]l1uZc31FGYMXa
The comment at the end of the line, if present, is ignored.
In recipient files passed to -R/--recipients-file, unsupported but valid SSH public keys are ignored with
a warning, to facilitate using authorized_keys or GitHub .keys files. (See EXAMPLES.)
An IDENTITY is an SSH private key file passed individually to -i/--identity. Note that keys held on
hardware tokens such as YubiKeys or accessed via ssh-agent(1) are not supported.
An encrypted file can be linked to the SSH public key it was encrypted to. This is so that age can
identify the correct SSH private key before requesting its password, if any.
Plugins
age can be extended through plugins. A plugin is only loaded if a corresponding RECIPIENT or IDENTITY is
specified. (Simply decrypting a file encrypted with a plugin will not cause it to load, for security
reasons among others.)
A RECIPIENT for a plugin named example starts with age1example1, while an IDENTITY starts with
AGE-PLUGIN-EXAMPLE-1. They both encode arbitrary plugin-specific data, and are generated by the plugin.
When either is specified, age searches for age-plugin-example in the PATH and executes it to perform the
file header encryption or decryption. The plugin may request input from the user through age to complete
the operation.
Plugins can be freely mixed with other plugins or natively supported keys.
A plugin is not bound to only encrypt or decrypt files meant for or generated by the plugin. For example,
a plugin can be used to decrypt files encrypted to a native X25519 RECIPIENT or even with a passphrase.
Similarly, a plugin can encrypt a file such that it can be decrypted without the use of any plugin.
Plugins for which the IDENTITY/RECIPIENT distinction doesn't make sense (such as a symmetric encryption
plugin) may generate only an IDENTITY and instruct the user to perform encryption with the -e/--encrypt
and -i/--identity flags. Plugins for which the concept of separate identities doesn't make sense (such as
a password-encryption plugin) may instruct the user to use the -j flag.
EXIT STATUS
age will exit 0 if and only if encryption or decryption are successful for the full length of the input.
If an error occurs during decryption, partial output might still be generated, but only if it was
possible to securely authenticate it. No unauthenticated output is ever released.
BACKWARDS COMPATIBILITY
Files encrypted with a stable version (not alpha, beta, or release candidate) of age, or with any v1.0.0
beta or release candidate, will decrypt with any later version of the tool.
If decrypting older files poses a security risk, doing so might cause an error by default. In this case,
a flag will be provided to force the operation.
EXAMPLES
Generate a new identity, encrypt data, and decrypt:
$ age-keygen -o key.txt
Public key: age1ql3z7hjy54pw3hyww5ayyfg7zqgvc7w3j2elw8zmrj2kg5sfn9aqmcac8p
$ tar cvz ~/data | age -r age1ql3z7hjy54pw3hyww5ayyfg7zqgvc7w3j2elw8zmrj2kg5sfn9aqmcac8p > data.tar.gz.age
$ age -d -o data.tar.gz -i key.txt data.tar.gz.age
Encrypt example.jpg to multiple recipients and output to example.jpg.age:
$ age -o example.jpg.age -r age1ql3z7hjy54pw3hyww5ayyfg7zqgvc7w3j2elw8zmrj2kg5sfn9aqmcac8p \
-r age1lggyhqrw2nlhcxprm67z43rta597azn8gknawjehu9d9dl0jq3yqqvfafg example.jpg
Encrypt to a list of recipients:
$ cat > recipients.txt
# Alice
age1ql3z7hjy54pw3hyww5ayyfg7zqgvc7w3j2elw8zmrj2kg5sfn9aqmcac8p
# Bob
age1lggyhqrw2nlhcxprm67z43rta597azn8gknawjehu9d9dl0jq3yqqvfafg
$ age -R recipients.txt example.jpg > example.jpg.age
Encrypt and decrypt a file using a passphrase:
$ age -p secrets.txt > secrets.txt.age
Enter passphrase (leave empty to autogenerate a secure one):
Using the autogenerated passphrase "release-response-step-brand-wrap-ankle-pair-unusual-sword-train".
$ age -d secrets.txt.age > secrets.txt
Enter passphrase:
Encrypt and decrypt with a passphrase-protected identity file:
$ age-keygen | age -p > key.age
Public key: age1yhm4gctwfmrpz87tdslm550wrx6m79y9f2hdzt0lndjnehwj0ukqrjpyx5
Enter passphrase (leave empty to autogenerate a secure one):
Using the autogenerated passphrase "hip-roast-boring-snake-mention-east-wasp-honey-input-actress".
$ age -r age1yhm4gctwfmrpz87tdslm550wrx6m79y9f2hdzt0lndjnehwj0ukqrjpyx5 secrets.txt > secrets.txt.age
$ age -d -i key.age secrets.txt.age > secrets.txt
Enter passphrase for identity file "key.age":
Encrypt and decrypt with an SSH public key:
$ age -R ~/.ssh/id_ed25519.pub example.jpg > example.jpg.age
$ age -d -i ~/.ssh/id_ed25519 example.jpg.age > example.jpg
Encrypt and decrypt with age-plugin-yubikey:
$ age-plugin-yubikey # run interactive setup, generate identity file and obtain recipient
$ age -r age1yubikey1qwt50d05nh5vutpdzmlg5wn80xq5negm4uj9ghv0snvdd3yysf5yw3rhl3t secrets.txt > secrets.txt.age
$ age -d -i age-yubikey-identity-388178f3.txt secrets.txt.age
Encrypt to the SSH keys of a GitHub user:
$ curl https://github.com/benjojo.keys | age -R - example.jpg > example.jpg.age
SEE ALSO
age-keygen(1)
AUTHORS
Filippo Valsorda age@filippo.io
June 2024 AGE(1)