Provided by: procmail_3.24-1ubuntu3_amd64 
NAME
procmailex - procmail rcfile examples
SYNOPSIS
$HOME/.procmailrc examples
DESCRIPTION
For a description of the rcfile format see procmailrc(5).
The weighted scoring technique is described in detail in the procmailsc(5) man page.
This man page shows several example recipes. For examples of complete rcfiles you can check the NOTES
section in procmail(1), or look at the example rcfiles in /usr/share/doc/procmail/examples.
EXAMPLES
Sort out all mail coming from the scuba-dive mailing list into the mailfolder scubafile (uses the
locallockfile scubafile.lock).
:0:
* ^TOscuba
scubafile
Forward all mail from peter about compilers to william (and keep a copy of it here in petcompil).
:0
* ^From.*peter
* ^Subject:.*compilers
{
:0 c
! william@somewhere.edu
:0
petcompil
}
An equivalent solution that accomplishes the same:
:0 c
* ^From.*peter
* ^Subject:.*compilers
! william@somewhere.edu
:0 A
petcompil
An equivalent, but slightly slower solution that accomplishes the same:
:0 c
* ^From.*peter
* ^Subject:.*compilers
! william@somewhere.edu
:0
* ^From.*peter
* ^Subject:.*compilers
petcompil
If you are fairly new to procmail and plan to experiment a little bit it often helps to have a safety net
of some sort. Inserting the following two recipes above all other recipes will make sure that of all
arriving mail always the last 32 messages will be preserved. In order for it to work as intended, you
have to create a directory named `backup' in $MAILDIR prior to inserting these two recipes.
:0 c
backup
:0 ic
| cd backup && rm -f dummy `ls -t msg.* | sed -e 1,32d`
If your system doesn't generate or generates incorrect leading `From ' lines on every mail, you can fix
this by calling up procmail with the -f- option. To fix the same problem by different means, you could
have inserted the following recipe above all other recipes in your rcfile. They will filter the header
of any mail through formail which will strip any leading `From ', and automatically regenerates it
subsequently.
:0 fhw
| formail -I "From " -a "From "
Add the headers of all messages that didn't come from the postmaster to your private header collection
(for statistics or mail debugging); and use the lockfile `headc.lock'. In order to make sure the
lockfile is not removed until the pipe has finished, you have to specify option `w'; otherwise the
lockfile would be removed as soon as the pipe has accepted the mail.
:0 hwc:
* !^FROM_MAILER
| uncompress headc.Z; cat >>headc; compress headc
Or, if you would use the more efficient gzip instead of compress:
:0 hwc:
* !^FROM_MAILER
| gzip >>headc.gz
Forward all mails shorter than 1000 bytes to my home address (no lockfile needed on this recipe).
:0
* < 1000
! myname@home
Split up incoming digests from the surfing mailing list into their individual messages, and store them
into surfing, using surfing.lock as the locallockfile.
:0:
* ^Subject:.*surfing.*Digest
| formail +1 -ds >>surfing
Store everything coming from the postmaster or mailer-daemon (like bounced mail) into the file postm,
using postm.lock as the locallockfile.
:0:
* ^FROM_MAILER
postm
A simple autoreply recipe. It makes sure that neither mail from any daemon (like bouncing mail or mail
from mailing-lists), nor autoreplies coming from yourself will be autoreplied to. If this precaution
would not be taken, disaster could result (`ringing' mail). In order for this recipe to autoreply to all
the incoming mail, you should of course insert it before all other recipes in your rcfile. However, it
is advisable to put it after any recipes that process the mails from subscribed mailinglists; it
generally is not a good idea to generate autoreplies to mailinglists (yes, the !^FROM_DAEMON regexp
should already catch those, but if the mailinglist doesn't follow accepted conventions, this might not be
enough).
:0 h c
* !^FROM_DAEMON
* !^X-Loop: your@own.mail.address
| (formail -r -I"Precedence: junk" \
-A"X-Loop: your@own.mail.address" ; \
echo "Mail received.") | $SENDMAIL -t
A more complicated autoreply recipe that implements the functional equivalent of the well known
vacation(1) program. This recipe is based on the same principles as the last one (prevent `ringing'
mail). In addition to that however, it maintains a vacation database by extracting the name of the
sender and inserting it in the vacation.cache file if the name was new (the vacation.cache file is
maintained by formail which will make sure that it always contains the most recent names, the size of the
file is limited to a maximum of approximately 8192 bytes). If the name was new, an autoreply will be
sent.
As you can see, the following recipe has comments between the conditions. This is allowed. Do not put
comments on the same line as a condition though.
SHELL=/bin/sh # only needed for older versions of procmail
:0 Whc: vacation.lock
# Perform a quick check to see if the mail was addressed to us
* $^To:.*\<$\LOGNAME\>
# Don't reply to daemons and mailinglists
* !^FROM_DAEMON
# Mail loops are evil
* !^X-Loop: your@own.mail.address
| formail -rD 8192 vacation.cache
:0 ehc # if the name was not in the cache
| (formail -rI"Precedence: junk" \
-A"X-Loop: your@own.mail.address" ; \
echo "I received your mail,"; \
echo "but I won't be back until Monday."; \
echo "-- "; cat $HOME/.signature \
) | $SENDMAIL -oi -t
Store all messages concerning TeX in separate, unique filenames, in a directory named texmail (this
directory has to exist); there is no need to use lockfiles in this case, so we won't.
:0
* (^TO|^Subject:.*)TeX[^t]
texmail
The same as above, except now we store the mails in numbered files (MH mail folder).
:0
* (^TO|^Subject:.*)TeX[^t]
texmail/.
Or you could file the mail in several directory folders at the same time. The following recipe will
deliver the mail to two MH-folders and one directory folder. It is actually only one file with two extra
hardlinks.
:0
* (^TO|^Subject:.*)TeX[^t]
texmail/. wordprocessing dtp/.
Store all the messages about meetings in a folder that is in a directory that changes every month. E.g.
if it were January 1994, the folder would have the name `94-01/meeting' and the locallockfile would be
`94-01/meeting.lock'.
:0:
* meeting
`date +%y-%m`/meeting
The same as above, but, if the `94-01' directory wouldn't have existed, it is created automatically:
MONTHFOLDER=`date +%y-%m`
:0 Wic
* ? test ! -d $MONTHFOLDER
| mkdir $MONTHFOLDER
:0:
* meeting
${MONTHFOLDER}/meeting
The same as above, but now by slightly different means:
MONTHFOLDER=`date +%y-%m`
DUMMY=`test -d $MONTHFOLDER || mkdir $MONTHFOLDER`
:0:
* meeting
${MONTHFOLDER}/meeting
If you are subscribed to several mailinglists and people cross-post to some of them, you usually receive
several duplicate mails (one from every list). The following simple recipe eliminates duplicate mails.
It tells formail to keep an 8KB cache file in which it will store the Message-IDs of the most recent
mails you received. Since Message-IDs are guaranteed to be unique for every new mail, they are ideally
suited to weed out duplicate mails. Simply put the following recipe at the top of your rcfile, and no
duplicate mail will get past it.
:0 Wh: msgid.lock
| formail -D 8192 msgid.cache
Beware if you have delivery problems in recipes below this one and procmail tries to requeue the mail,
then on the next queue run, this mail will be considered a duplicate and will be thrown away. For those
not quite so confident in their own scripting capabilities, you can use the following recipe instead. It
puts duplicates in a separate folder instead of throwing them away. It is up to you to periodically
empty the folder of course.
:0 Whc: msgid.lock
| formail -D 8192 msgid.cache
:0 a:
duplicates
Procmail can deliver to MH folders directly, but, it does not update the unseen sequences the real MH
manages. If you want procmail to update those as well, use a recipe like the following which will file
everything that contains the word spam in the body of the mail into an MH folder called spamfold. Note
the local lockfile, which is needed because MH programs do not lock the sequences file. Asynchronous
invocations of MH programs that change the sequences file may therefore corrupt it or silently lose
changes. Unfortunately, the lockfile doesn't completely solve the problem as rcvstore could be invoked
while `show' or `mark' or some other MH program is running. This problem is expected to be fixed in some
future version of MH, but until then, you'll have to balance the risk of lost or corrupt sequences
against the benefits of the unseen sequence.
:0 :spamfold/$LOCKEXT
* B ?? spam
| rcvstore +spamfold
When delivering to emacs folders (i.e., mailfolders managed by any emacs mail package, e.g., RMAIL or VM)
directly, you should use emacs-compatible lockfiles. The emacs mailers are a bit braindamaged in that
respect, they get very upset if someone delivers to mailfolders which they already have in their internal
buffers. The following recipe assumes that $HOME equals /home/john.
MAILDIR=Mail
:0:/usr/local/lib/emacs/lock/!home!john!Mail!mailbox
* ^Subject:.*whatever
mailbox
Alternatively, you can have procmail deliver into its own set of mailboxes, which you then periodically
empty and copy over to your emacs files using movemail. Movemail uses mailbox.lock local lockfiles per
mailbox. This actually is the preferred mode of operation in conjunction with procmail.
To extract certain headers from a mail and put them into environment variables you can use any of the
following constructs:
SUBJECT=`formail -xSubject:` # regular field
FROM=`formail -rt -xTo:` # special case
:0 h # alternate method
KEYWORDS=| formail -xKeywords:
If you are using temporary files in a procmailrc file, and want to make sure that they are removed just
before procmail exits, you could use something along the lines of:
TEMPORARY=$HOME/tmp/pmail.$$
TRAP="/bin/rm -f $TEMPORARY"
The TRAP keyword can also be used to change the exitcode of procmail. I.e. if you want procmail to
return an exitcode of `1' instead of its regular exitcodes, you could use:
EXITCODE=""
TRAP="exit 1;" # The trailing semi-colon is important
# since exit is not a standalone program
Or, if the exitcode does not need to depend on the programs run from the TRAP, you can use a mere:
EXITCODE=1
The following recipe prints every incoming mail that looks like a postscript file.
:0 Bb
* ^^%!
| lpr
The following recipe does the same, but is a bit more selective. It only prints the postscript file if
it comes from the print-server. The first condition matches only if it is found in the header. The
second condition only matches at the start of the body.
:0 b
* ^From[ :].*print-server
* B ?? ^^%!
| lpr
The same as above, but now by slightly different means:
:0
* ^From[ :].*print-server
{
:0 B b
* ^^%!
| lpr
}
Likewise:
:0 HB b
* ^^(.+$)*From[ :].*print-server
* ^^(.+$)*^%!
| lpr
Suppose you have two accounts, you use both accounts regularly, but they are in very distinct places
(i.e., you can only read mail that arrived at either one of the accounts). You would like to forward
mail arriving at account one to account two, and the other way around. The first thing that comes to
mind is using .forward files at both sites; this won't work of course, since you will be creating a mail
loop. This mail loop can be avoided by inserting the following recipe in front of all other recipes in
the $HOME/.procmailrc files on both sites. If you make sure that you add the same X-Loop: field at both
sites, mail can now safely be forwarded to the other account from either of them.
:0 c
* !^X-Loop: yourname@your.main.mail.address
| formail -A "X-Loop: yourname@your.main.mail.address" | \
$SENDMAIL -oi yourname@the.other.account
If someone sends you a mail with the word `retrieve' in the subject, the following will automatically
send back the contents of info_file to the sender. Like in all recipes where we send mail, we watch out
for mail loops.
:0
* !^From +YOUR_USERNAME
* !^Subject:.*Re:
* !^FROM_DAEMON
* ^Subject:.*retrieve
| (formail -r ; cat info_file) | $SENDMAIL -oi -t
Now follows an example for a very simple fileserver accessible by mail. For more demanding applications,
I suggest you take a look at SmartList (available from the same place as the procmail distribution). As
listed, this fileserver sends back at most one file per request, it ignores the body of incoming mails,
the Subject: line has to look like "Subject: send file the_file_you_want" (the blanks are significant),
it does not return files that have names starting with a dot, nor does it allow files to be retrieved
that are outside the fileserver directory tree (if you decide to munge this example, make sure you do not
inadvertently loosen this last restriction).
:0
* ^Subject: send file [0-9a-z]
* !^X-Loop: yourname@your.main.mail.address
* !^Subject:.*Re:
* !^FROM_DAEMON
* !^Subject: send file .*[/.]\.
{
MAILDIR=$HOME/fileserver # chdir to the fileserver directory
:0 fhw # reverse mailheader and extract name
* ^Subject: send file \/[^ ]*
| formail -rA "X-Loop: yourname@your.main.mail.address"
FILE="$MATCH" # the requested filename
:0 ah
| cat - ./$FILE 2>&1 | $SENDMAIL -oi -t
}
The following example preconverts all plain-text mail arriving in certain encoded MIME formats into a
more compact 8-bit format which can be used and displayed more easily by most programs. The mimencode(1)
program is part of Nathaniel Borenstein's metamail package.
:0
* ^Content-Type: *text/plain
{
:0 fbw
* ^Content-Transfer-Encoding: *quoted-printable
| mimencode -u -q
:0 Afhw
| formail -I "Content-Transfer-Encoding: 8bit"
:0 fbw
* ^Content-Transfer-Encoding: *base64
| mimencode -u -b
:0 Afhw
| formail -I "Content-Transfer-Encoding: 8bit"
}
The following one is rather exotic, but it only serves to demonstrate a feature. Suppose you have a file
in your HOME directory called ".urgent", and the (one) person named in that file is the sender of an
incoming mail, you'd like that mail to be stored in $MAILDIR/urgent instead of in any of the normal
mailfolders it would have been sorted in. Then this is what you could do (beware, the filelength of
$HOME/.urgent should be well below $LINEBUF, increase LINEBUF if necessary):
URGMATCH=`cat $HOME/.urgent`
:0:
* $^From.*${URGMATCH}
urgent
An entirely different application for procmail would be to conditionally apply filters to a certain
(outgoing) text or mail. A typical example would be a filter through which you pipe all outgoing mail,
in order to make sure that it will be MIME encoded only if it needs to be. I.e. in this case you could
start procmail in the middle of a pipe like:
cat newtext | procmail ./mimeconvert | mail chris@where.ever
The mimeconvert rcfile could contain something like (the =0x80= and =0xff= should be substituted with the
real 8-bit characters):
DEFAULT=| # pipe to stdout instead of
# delivering mail as usual
:0 Bfbw
* [=0x80=-=0xff=]
| mimencode -q
:0 Afhw
| formail -I 'MIME-Version: 1.0' \
-I 'Content-Type: text/plain; charset=ISO-8859-1' \
-I 'Content-Transfer-Encoding: quoted-printable'
SEE ALSO
procmail(1), procmailrc(5), procmailsc(5), sh(1), csh(1), mail(1), mailx(1), uucp(1), aliases(5),
sendmail(8), egrep(1), grep(1), biff(1), comsat(8), mimencode(1), lockfile(1), formail(1)
AUTHORS
Stephen R. van den Berg
<srb@cuci.nl>
BuGless PROCMAILEX(5)