NAME

       PPM - Netpbm color image format

DESCRIPTION

       This program is part of Netpbm(1).

       The PPM format is a lowest common denominator color image file format.

       It should be noted that this format is egregiously inefficient.  It is highly redundant, while containing
       a  lot  of information that the human eye can't even discern.  Furthermore, the format allows very little
       information about the image besides basic color, which means you may have to couple a file in this format
       with other independent information to get any decent use out of it.  However, it is very  easy  to  write
       and analyze programs to process this format, and that is the point.

       It  should  also  be  noted  that  files often conform to this format in every respect except the precise
       semantics of the sample values.  These files are useful because of the way PPM is used as an intermediary
       format.  They are informally called PPM files, but to be absolutely  precise,  you  should  indicate  the
       variation  from  true  PPM.   For example, "PPM using the red, green, and blue colors that the scanner in
       question uses."

       The name "PPM" is an acronym derived from "Portable Pixel Map."  Images in this format (or a precursor of
       it) were once also called "portable pixmaps."

THE FORMAT

       The format definition is as follows.  You can use the libnetpbm(1)  C  subroutine  library  to  read  and
       interpret the format conveniently and accurately.

       A  PPM  file  consists of a sequence of one or more PPM images. There are no data, delimiters, or padding
       before, after, or between images.

       Each PPM image consists of the following:

       •      A "magic number" for identifying the file type.  A ppm image's magic number is the two  characters
              "P6".

       •

              Whitespace (blanks, TABs, CRs, LFs).

       •

              A width, formatted as ASCII characters in decimal.

       •

              Whitespace.

       •

              A height, again in ASCII decimal.

       •

              Whitespace.

       •

              The  maximum  color value (Maxval), again in ASCII decimal.  Must be less than 65536 and more than
              zero.

       •      A single whitespace character (usually a newline).

       •      A raster of Height rows, in order from top to bottom.  Each row consists of Width pixels, in order
              from left to right.  Each pixel is a triplet of red, green, and blue samples, in that order.  Each
              sample is represented in pure binary by either 1 or 2 bytes.  If the Maxval is less than  256,  it
              is 1 byte.  Otherwise, it is 2 bytes.  The most significant byte is first.

              A  row  of  an image is horizontal.  A column is vertical.  The pixels in the image are square and
              contiguous.

              In the raster, the sample values are "nonlinear." They are proportional to the  intensity  of  the
              ITU-R  Recommendation  BT.709  red,  green,  and  blue  in the pixel, adjusted by the BT.709 gamma
              transfer function.  (That transfer function specifies a gamma number  of  2.2  and  has  a  linear
              section  for small intensities).  A value of Maxval for all three samples represents CIE D65 white
              and the most intense color in the color universe of which the image is part (the color universe is
              all the colors in all images to which this image might be compared).

              BT.709's range of channel values (16-240) is irrelevant to PPM.

              ITU-R Recommendation BT.709 is a renaming of the former CCIR Recommendation 709.   When  CCIR  was
              absorbed into its parent organization, the ITU, ca. 2000, the standard was renamed.  This document
              once referred to the standard as CIE Rec. 709, but it isn't clear now that CIE ever sponsored such
              a standard.

              Note  that  another  popular  color  space  is  the newer sRGB.  A common variation from PPM is to
              substitute this color space for the one specified.  You can use pnmgamma to convert  between  this
              variation and true PPM.

              Note that a common variation from the PPM format is to have the sample values be "linear," i.e. as
              specified  above  except without the gamma adjustment.  pnmgamma takes such a PPM variant as input
              and produces a true PPM as output.

       Strings starting with "#" may be comments, the same as with PBM(1).

       Note that you can use pamdepth to convert between a the format with 1 byte per sample and the one with  2
       bytes per sample.

       All characters referred to herein are encoded in ASCII.  "newline" refers to the character known in ASCII
       as  Line  Feed  or  LF.   A  "white space" character is space, CR, LF, TAB, VT, or FF (I.e. what the ANSI
       standard C isspace() function calls white space).

   Plain PPM
       There is actually another version of the PPM format that is fairly rare: "plain" PPM format.  The  format
       above,  which generally considered the normal one, is known as the "raw" PPM format.  See pbm(1) for some
       commentary on how plain and raw formats relate to one another and how to use them.

       The difference in the plain format is:

       •

              There is exactly one image in a file.

       •

              The magic number is P3 instead of P6.

       •

              Each sample in the raster is represented as an ASCII decimal number (of arbitrary size).

       •

              Each sample in the raster has white space before and  after  it.   There  must  be  at  least  one
              character of white space between any two samples, but there is no maximum.  There is no particular
              separation  of  one  pixel from another -- just the required separation between the blue sample of
              one pixel from the red sample of the next pixel.

       •

              No line should be longer than 70 characters.

       Here is an example of a small image in this format.
       P3
       # feep.ppm
       4 4
       15
        0  0  0    0  0  0    0  0  0   15  0 15
        0  0  0    0 15  7    0  0  0    0  0  0
        0  0  0    0  0  0    0 15  7    0  0  0
       15  0 15    0  0  0    0  0  0    0  0  0

       There is a newline character at the end of each of these lines.

       Programs that read this format should be as lenient as possible, accepting anything that  looks  remotely
       like a PPM image.

INTERNET MEDIA TYPE

       No Internet Media Type (aka MIME type, content type) for PPM has been registered with IANA, but the value
       image/x-portable-pixmap is conventional.

       Note that the PNM Internet Media Type image/x-portable-anymap also applies.

FILE NAME

       There  are  no  requirements  on  the name of a PPM file, but the convention is to use the suffix ".ppm".
       "pnm" is also conventional, for cases where distinguishing between the particular subformats  of  PNM  is
       not convenient.

COMPATIBILITY

       Before  April  2000, a raw format PPM file could not have a maxval greater than 255.  Hence, it could not
       have more than one byte per sample.  Old programs may depend on this.

       Before July 2000, there could be at most one image in a PPM file.  As a result, most tools to process PPM
       files ignore (and don't read) any data after the first image.

SEE ALSO

       pnm(1), pgm(1), pbm(1), pam(1), programs that process PPM(1)

DOCUMENT SOURCE

       This manual page was generated by the Netpbm tool 'makeman' from HTML source.  The  master  documentation
       is at

              http://netpbm.sourceforge.net/doc/ppm.html

netpbm documentation                             09 October 2016                     PPM Format Specification(5)