NAME

       snek-duemilanove-instal - Install Snek to Duemilanove

SYNOPSIS

       snek-duemilanove-install [OPTION]... [COMMAND]

DESCRIPTION

       snek-duemilanove-install  installs the Snek programming language on an ATmega328P Duemilanove board using
       the Optiboot boot loader.

OPTIONS

       -hex <snek.hex>
              Specifies the hex file to load to the board. The default is the  currently  installed  version  of
              Snek.

       -port <port>
              Specifies the serial port to use. The default is /dev/ttyUSB0.

       -mcu <MCU name>
              Specifies  which  micro  controller  to  expect  to find on the board. Some boards have m328 while
              others have m328p. The default is m328, but if you get an error message indicating a mismatch, you
              can try the other.

OPTIBOOT

       Snek for the Duemilanove requires Optiboot. If your board does not already have Optiboot, you can use the
       Arduino IDE to install Optiboot on your Duemilanove. Follow the instructions on the  Optiboot  web  site:
       https://github.com/Optiboot/optiboot to learn how to do that.

AUTHOR

       Keith Packard

                                            snek-duemilanove-install                 SNEK-DUEMILANOVE-INSTALL(1)