Provided by: mariadb-client_11.4.5-0ubuntu0.24.10.1_amd64 
NAME
innotop - MySQL and InnoDB transaction/status monitor.
SYNOPSIS
To monitor servers normally:
innotop
To monitor InnoDB status information from a file:
innotop /var/log/mysql/mysqld.err
To run innotop non-interactively in a pipe-and-filter configuration:
innotop --count 5 -d 1 -n
To monitor a database on another system using a particular username and password:
innotop -u <username> -p <password> -h <hostname>
DESCRIPTION
innotop monitors MySQL servers. Each of its modes shows you a different aspect of what's happening in
the server. For example, there's a mode for monitoring replication, one for queries, and one for
transactions. innotop refreshes its data periodically, so you see an updating view.
innotop has lots of features for power users, but you can start and run it with virtually no
configuration. If you're just getting started, see "QUICK-START". Press '?' at any time while running
innotop for context-sensitive help.
QUICK-START
To start innotop, open a terminal or command prompt. If you have installed innotop on your system, you
should be able to just type "innotop" and press Enter; otherwise, you will need to change to innotop's
directory and type "perl innotop".
With no options specified, innotop will attempt to connect to a MySQL server on localhost using
mariadb_read_default_group=client for other connection parameters. If you need to specify a different
username and password, use the -u and -p options, respectively. To monitor a MySQL database on another
host, use the -h option.
After you've connected, innotop should show you something like the following:
[RO] Query List (? for help) localhost, 01:11:19, 449.44 QPS, 14/7/163 con/run
CXN When Load QPS Slow QCacheHit KCacheHit BpsIn BpsOut
localhost Total 0.00 1.07k 697 0.00% 98.17% 476.83k 242.83k
CXN Cmd ID User Host DB Time Query
localhost Query 766446598 test 10.0.0.1 foo 00:02 INSERT INTO table (
(This sample is truncated at the right so it will fit on a terminal when running 'man innotop')
If your server is busy, you'll see more output. Notice the first line on the screen, which tells you
that readonly is set to true ([RO]), what mode you're in and what server you're connected to. You can
change to other modes with keystrokes; press 'T' to switch to a list of InnoDB transactions, for example.
Press the '?' key to see what keys are active in the current mode. You can press any of these keys and
innotop will either take the requested action or prompt you for more input. If your system has
Term::ReadLine support, you can use TAB and other keys to auto-complete and edit input.
To quit innotop, press the 'q' key.
OPTIONS
innotop is mostly configured via its configuration file, but some of the configuration options can come
from the command line. You can also specify a file to monitor for InnoDB status output; see "MONITORING
A FILE" for more details.
You can negate some options by prefixing the option name with --no. For example, --noinc (or --no-inc)
negates "--inc".
--color
Enable or disable terminal coloring. Corresponds to the "color" config file setting.
--config
Specifies a configuration file to read. This option is non-sticky, that is to say it does not
persist to the configuration file itself.
--count
Refresh only the specified number of times (ticks) before exiting. Each refresh is a pause for
"interval" seconds, followed by requesting data from MySQL connections and printing it to the
terminal.
--delay
Specifies the amount of time to pause between ticks (refreshes). Corresponds to the configuration
option "interval".
--help
Print a summary of command-line usage and exit.
--host
Host to connect to.
--inc
Specifies whether innotop should display absolute numbers or relative numbers (offsets from their
previous values). Corresponds to the configuration option "status_inc".
--mode
Specifies the mode in which innotop should start. Corresponds to the configuration option "mode".
--nonint
Enable non-interactive operation. See "NON-INTERACTIVE OPERATION" for more.
--password
Password to use for connection.
--port
Port to use for connection.
--skipcentral
Don't read the central configuration file.
--timestamp
In -n mode, write a timestamp either before every screenful of output, or if the option is given
twice, at the start of every line. The format is controlled by the timeformat config variable.
--user
User to use for connection.
--version
Output version information and exit.
--write
Sets the configuration option "readonly" to 0, making innotop write the running configuration to
~/.innotop/innotop.conf on exit, if no configuration file was loaded at start-up.
HOTKEYS
innotop is interactive, and you control it with key-presses.
• Uppercase keys switch between modes.
• Lowercase keys initiate some action within the current mode.
• Other keys do something special like change configuration or show the innotop license.
Press '?' at any time to see the currently active keys and what they do.
MODES
Each of innotop's modes retrieves and displays a particular type of data from the servers you're
monitoring. You switch between modes with uppercase keys. The following is a brief description of each
mode, in alphabetical order. To switch to the mode, press the key listed in front of its heading in the
following list:
A: Health Dashboard
This mode displays a single table with one row per monitored server. The columns show essential
overview information about the server's health, and coloration rules show whether replication is
running or if there are any very long-running queries or excessive replication delay.
B: InnoDB Buffers
This mode displays information about the InnoDB buffer pool, page statistics, insert buffer, and
adaptive hash index. The data comes from SHOW INNODB STATUS.
This mode contains the "buffer_pool", "page_statistics", "insert_buffers", and "adaptive_hash_index"
tables by default.
C: Command Summary
This mode is similar to mytop's Command Summary mode. It shows the "cmd_summary" table, which looks
something like the following:
Command Summary (? for help) localhost, 25+07:16:43, 2.45 QPS, 3 thd, 5.0.40
_____________________ Command Summary _____________________
Name Value Pct Last Incr Pct
Select_scan 3244858 69.89% 2 100.00%
Select_range 1354177 29.17% 0 0.00%
Select_full_join 39479 0.85% 0 0.00%
Select_full_range_join 4097 0.09% 0 0.00%
Select_range_check 0 0.00% 0 0.00%
The command summary table is built by extracting variables from "STATUS_VARIABLES". The variables
must be numeric and must match the prefix given by the "cmd_filter" configuration variable. The
variables are then sorted by value descending and compared to the last variable, as shown above. The
percentage columns are percentage of the total of all variables in the table, so you can see the
relative weight of the variables.
The example shows what you see if the prefix is "Select_". The default prefix is "Com_". You can
choose a prefix with the 's' key.
It's rather like running SHOW VARIABLES LIKE "prefix%" with memory and nice formatting.
Values are aggregated across all servers. The Pct columns are not correctly aggregated across
multiple servers. This is a known limitation of the grouping algorithm that may be fixed in the
future.
D: InnoDB Deadlocks
This mode shows the transactions involved in the last InnoDB deadlock. A second table shows the
locks each transaction held and waited for. A deadlock is caused by a cycle in the waits-for graph,
so there should be two locks held and one waited for unless the deadlock information is truncated.
InnoDB puts deadlock information before some other information in the SHOW INNODB STATUS output. If
there are a lot of locks, the deadlock information can grow very large, and there is a limit on the
size of the SHOW INNODB STATUS output. A large deadlock can fill the entire output, or even be
truncated, and prevent you from seeing other information at all. If you are running innotop in
another mode, for example T mode, and suddenly you don't see anything, you might want to check and
see if a deadlock has wiped out the data you need.
If it has, you can create a small deadlock to replace the large one. Use the 'w' key to 'wipe' the
large deadlock with a small one. This will not work unless you have defined a deadlock table for the
connection (see "SERVER CONNECTIONS").
You can also configure innotop to automatically detect when a large deadlock needs to be replaced
with a small one (see "auto_wipe_dl").
This mode displays the "deadlock_transactions" and "deadlock_locks" tables by default.
F: InnoDB Foreign Key Errors
This mode shows the last InnoDB foreign key error information, such as the table where it happened,
when and who and what query caused it, and so on.
InnoDB has a huge variety of foreign key error messages, and many of them are just hard to parse.
innotop doesn't always do the best job here, but there's so much code devoted to parsing this messy,
unparsable output that innotop is likely never to be perfect in this regard. If innotop doesn't show
you what you need to see, just look at the status text directly.
This mode displays the "fk_error" table by default.
I: InnoDB I/O Info
This mode shows InnoDB's I/O statistics, including the I/O threads, pending I/O, file I/O
miscellaneous, and log statistics. It displays the "io_threads", "pending_io", "file_io_misc", and
"log_statistics" tables by default.
K: InnoDB Lock Waits
This mode shows information from InnoDB plugin's transaction and locking tables. You can use it to
find when a transaction is waiting for another, and kill the blocking transaction. It displays the
"innodb_blocked_blocker" table.
L: Locks
This mode shows information about current locks. At the moment only InnoDB locks are supported, and
by default you'll only see locks for which transactions are waiting. This information comes from the
TRANSACTIONS section of the InnoDB status text. If you have a very busy server, you may have
frequent lock waits; it helps to be able to see which tables and indexes are the "hot spot" for
locks. If your server is running pretty well, this mode should show nothing.
You can configure MySQL and innotop to monitor not only locks for which a transaction is waiting, but
those currently held, too. You can do this with the InnoDB Lock Monitor
(<http://dev.mysql.com/doc/en/innodb-monitor.html>). It's not documented in the MySQL manual, but
creating the lock monitor with the following statement also affects the output of SHOW INNODB STATUS,
which innotop uses:
CREATE TABLE innodb_lock_monitor(a int) ENGINE=INNODB;
This causes InnoDB to print its output to the MySQL file every 16 seconds or so, as stated in the
manual, but it also makes the normal SHOW INNODB STATUS output include lock information, which
innotop can parse and display (that's the undocumented feature).
This means you can do what may have seemed impossible: to a limited extent (InnoDB truncates some
information in the output), you can see which transaction holds the locks something else is waiting
for. You can also enable and disable the InnoDB Lock Monitor with the key mappings in this mode.
This mode displays the "innodb_locks" table by default. Here's a sample of the screen when one
connection is waiting for locks another connection holds:
_________________________________ InnoDB Locks __________________________
CXN ID Type Waiting Wait Active Mode DB Table Index
localhost 12 RECORD 1 00:10 00:10 X test t1 PRIMARY
localhost 12 TABLE 0 00:10 00:10 IX test t1
localhost 12 RECORD 1 00:10 00:10 X test t1 PRIMARY
localhost 11 TABLE 0 00:00 00:25 IX test t1
localhost 11 RECORD 0 00:00 00:25 X test t1 PRIMARY
You can see the first connection, ID 12, is waiting for a lock on the PRIMARY key on test.t1, and has
been waiting for 10 seconds. The second connection isn't waiting, because the Waiting column is 0,
but it holds locks on the same index. That tells you connection 11 is blocking connection 12.
M: Master/Slave Replication Status
This mode shows the output of SHOW SLAVE STATUS and SHOW MASTER STATUS in three tables. The first
two divide the slave's status into SQL and I/O thread status, and the last shows master status.
Filters are applied to eliminate non-slave servers from the slave tables, and non-master servers from
the master table.
This mode displays the "slave_sql_status", "slave_io_status", and "master_status" tables by default.
O: Open Tables
This section comes from MySQL's SHOW OPEN TABLES command. By default it is filtered to show tables
which are in use by one or more queries, so you can get a quick look at which tables are 'hot'. You
can use this to guess which tables might be locked implicitly.
This mode displays the "open_tables" mode by default.
U: User Statistics
This mode displays data that's available in Percona's enhanced version of MySQL (also known as
Percona Server with XtraDB). Specifically, it makes it easy to enable and disable the so-called
"user statistics." This feature gathers stats on clients, threads, users, tables, and indexes and
makes them available as INFORMATION_SCHEMA tables. These are invaluable for understanding what your
server is doing. They are also available in MariaDB.
The statistics supported so far are only from the TABLE_STATISTICS and INDEX_STATISTICS tables added
by Percona. There are three views: one of table stats, one of index stats (which can be aggregated
with the = key), and one of both.
The server doesn't gather these stats by default. You have to set the variable userstat_running to
turn it on. You can do this easily with innotop from U mode, with the 's' key.
Q: Query List
This mode displays the output from SHOW FULL PROCESSLIST, much like mytop's query list mode. This
mode does not show InnoDB-related information. This is probably one of the most useful modes for
general usage.
There is an informative header that shows general status information about your server. You can
toggle it on and off with the 'h' key. By default, innotop hides inactive processes and its own
process. You can toggle these on and off with the 'i' and 'a' keys.
You can EXPLAIN a query from this mode with the 'e' key. This displays the query's full text, the
results of EXPLAIN, and in newer MySQL versions, even the optimized query resulting from EXPLAIN
EXTENDED. innotop also tries to rewrite certain queries to make them EXPLAIN-able. For example,
INSERT/SELECT statements are rewritable.
This mode displays the "q_header" and "processlist" tables by default.
R: InnoDB Row Operations and Semaphores
This mode shows InnoDB row operations, row operation miscellaneous, semaphores, and information from
the wait array. It displays the "row_operations", "row_operation_misc", "semaphores", and
"wait_array" tables by default.
S: Variables & Status
This mode calculates statistics, such as queries per second, and prints them out in several different
styles. You can show absolute values, or incremental values between ticks.
You can switch between the views by pressing a key. The 's' key prints a single line each time the
screen updates, in the style of vmstat. The 'g' key changes the view to a graph of the same numbers,
sort of like tload. The 'v' key changes the view to a pivoted table of variable names on the left,
with successive updates scrolling across the screen from left to right. You can choose how many
updates to put on the screen with the "num_status_sets" configuration variable.
Headers may be abbreviated to fit on the screen in interactive operation. You choose which variables
to display with the 'c' key, which selects from predefined sets, or lets you create your own sets.
You can edit the current set with the 'e' key.
This mode doesn't really display any tables like other modes. Instead, it uses a table definition to
extract and format the data, but it then transforms the result in special ways before outputting it.
It uses the "var_status" table definition for this.
T: InnoDB Transactions
This mode shows transactions from the InnoDB monitor's output, in top-like format. This mode is the
reason I wrote innotop.
You can kill queries or processes with the 'k' and 'x' keys, and EXPLAIN a query with the 'e' or 'f'
keys. InnoDB doesn't print the full query in transactions, so explaining may not work right if the
query is truncated.
The informational header can be toggled on and off with the 'h' key. By default, innotop hides
inactive transactions and its own transaction. You can toggle this on and off with the 'i' and 'a'
keys.
This mode displays the "t_header" and "innodb_transactions" tables by default.
INNOTOP STATUS
The first line innotop displays is a "status bar" of sorts. What it contains depends on the mode you're
in, and what servers you're monitoring. The first few words are always [RO] (if readonly is set to 1),
the innotop mode, such as "InnoDB Txns" for T mode, followed by a reminder to press '?' for help at any
time.
ONE SERVER
The simplest case is when you're monitoring a single server. In this case, the name of the connection is
next on the status line. This is the name you gave when you created the connection -- most likely the
MySQL server's hostname. This is followed by the server's uptime.
If you're in an InnoDB mode, such as T or B, the next word is "InnoDB" followed by some information about
the SHOW INNODB STATUS output used to render the screen. The first word is the number of seconds since
the last SHOW INNODB STATUS, which InnoDB uses to calculate some per-second statistics. The next is a
smiley face indicating whether the InnoDB output is truncated. If the smiley face is a :-), all is well;
there is no truncation. A :^| means the transaction list is so long, InnoDB has only printed out some of
the transactions. Finally, a frown :-( means the output is incomplete, which is probably due to a
deadlock printing too much lock information (see "D: InnoDB Deadlocks").
The next two words indicate the server's queries per second (QPS) and how many threads (connections)
exist. Finally, the server's version number is the last thing on the line.
MULTIPLE SERVERS
If you are monitoring multiple servers (see "SERVER CONNECTIONS"), the status line does not show any
details about individual servers. Instead, it shows the names of the connections that are active.
Again, these are connection names you specified, which are likely to be the server's hostname. A
connection that has an error is prefixed with an exclamation point.
If you are monitoring a group of servers (see "SERVER GROUPS"), the status line shows the name of the
group. If any connection in the group has an error, the group's name is followed by the fraction of the
connections that don't have errors.
See "ERROR HANDLING" for more details about innotop's error handling.
MONITORING A FILE
If you give a filename on the command line, innotop will not connect to ANY servers at all. It will
watch the specified file for InnoDB status output and use that as its data source. It will always show a
single connection called 'file'. And since it can't connect to a server, it can't determine how long the
server it's monitoring has been up; so it calculates the server's uptime as time since innotop started
running.
SERVER ADMINISTRATION
While innotop is primarily a monitor that lets you watch and analyze your servers, it can also send
commands to servers. The most frequently useful commands are killing queries and stopping or starting
slaves.
You can kill a connection, or in newer versions of MySQL kill a query but not a connection, from "Q:
Query List" and "T: InnoDB Transactions" modes. Press 'k' to issue a KILL command, or 'x' to issue a
KILL QUERY command. innotop will prompt you for the server and/or connection ID to kill (innotop does
not prompt you if there is only one possible choice for any input). innotop pre-selects the longest-
running query, or the oldest connection. Confirm the command with 'y'.
In "Slave Replication Status"" in "M: Master mode, you can start and stop slaves with the 'a' and 'o'
keys, respectively. You can send these commands to many slaves at once. innotop fills in a default
command of START SLAVE or STOP SLAVE for you, but you can actually edit the command and send anything you
wish, such as SET GLOBAL SQL_SLAVE_SKIP_COUNTER=1 to make the slave skip one binlog event when it starts.
You can also ask innotop to calculate the earliest binlog in use by any slave and issue a PURGE MASTER
LOGS on the master. Use the 'b' key for this. innotop will prompt you for a master to run the command
on, then prompt you for the connection names of that master's slaves (there is no way for innotop to
determine this reliably itself). innotop will find the minimum binlog in use by these slave connections
and suggest it as the argument to PURGE MASTER LOGS.
in "U: User Statistics" mode, you can use the 's' key to start and stop the collection of the statistics
data for TABLE_STATISTICS and similar.
SERVER CONNECTIONS
When you create a server connection using '@', innotop asks you for a series of inputs, as follows:
DSN A DSN is a Data Source Name, which is the initial argument passed to the DBI module for connecting to
a server. It is usually of the form
DBI:MariaDB:;mariadb_read_default_group=mysql;host=HOSTNAME
Since this DSN is passed to the DBD::MariaDB driver, you should read the driver's documentation at
<https://metacpan.org/pod/DBD::MariaDB> for the exact details on all the options you can pass the
driver in the DSN. You can read more about DBI at <http://dbi.perl.org/docs/>, and especially at
<http://search.cpan.org/~timb/DBI/DBI.pm>.
The mariadb_read_default_group=mysql option lets the DBD driver read your MySQL options files, such
as ~/.my.cnf on UNIX-ish systems. You can use this to avoid specifying a username or password for
the connection.
InnoDB Deadlock Table
This optional item tells innotop a table name it can use to deliberately create a small deadlock (see
"D: InnoDB Deadlocks"). If you specify this option, you just need to be sure the table doesn't
exist, and that innotop can create and drop the table with the InnoDB storage engine. You can safely
omit or just accept the default if you don't intend to use this.
Username
innotop will ask you if you want to specify a username. If you say 'y', it will then prompt you for
a user name. If you have a MySQL option file that specifies your username, you don't have to specify
a username.
The username defaults to your login name on the system you're running innotop on.
Password
innotop will ask you if you want to specify a password. Like the username, the password is optional,
but there's an additional prompt that asks if you want to save the password in the innotop
configuration file. If you don't save it in the configuration file, innotop will prompt you for a
password each time it starts. Passwords in the innotop configuration file are saved in plain text,
not encrypted in any way.
Once you finish answering these questions, you should be connected to a server. But innotop isn't
limited to monitoring a single server; you can define many server connections and switch between them by
pressing the '@' key. See "SWITCHING BETWEEN CONNECTIONS".
SERVER GROUPS
If you have multiple MySQL instances, you can put them into named groups, such as 'all', 'masters', and
'slaves', which innotop can monitor all together.
You can choose which group to monitor with the '#' key, and you can press the TAB key to switch to the
next group. If you're not currently monitoring a group, pressing TAB selects the first group.
To create a group, press the '#' key and type the name of your new group, then type the names of the
connections you want the group to contain.
SWITCHING BETWEEN CONNECTIONS
innotop lets you quickly switch which servers you're monitoring. The most basic way is by pressing the
'@' key and typing the name(s) of the connection(s) you want to use. This setting is per-mode, so you
can monitor different connections in each mode, and innotop remembers which connections you choose.
You can quickly switch to the 'next' connection in alphabetical order with the 'n' key. If you're
monitoring a server group (see "SERVER GROUPS") this will switch to the first connection.
You can also type many connection names, and innotop will fetch and display data from them all. Just
separate the connection names with spaces, for example "server1 server2." Again, if you type the name of
a connection that doesn't exist, innotop will prompt you for connection information and create the
connection.
Another way to monitor multiple connections at once is with server groups. You can use the TAB key to
switch to the 'next' group in alphabetical order, or if you're not monitoring any groups, TAB will switch
to the first group.
innotop does not fetch data in parallel from connections, so if you are monitoring a large group or many
connections, you may notice increased delay between ticks.
When you monitor more than one connection, innotop's status bar changes. See "INNOTOP STATUS".
ERROR HANDLING
Error handling is not that important when monitoring a single connection, but is crucial when you have
many active connections. A crashed server or lost connection should not crash innotop. As a result,
innotop will continue to run even when there is an error; it just won't display any information from the
connection that had an error. Because of this, innotop's behavior might confuse you. It's a feature,
not a bug!
innotop does not continue to query connections that have errors, because they may slow innotop and make
it hard to use, especially if the error is a problem connecting and causes a long time-out. Instead,
innotop retries the connection occasionally to see if the error still exists. If so, it will wait until
some point in the future. The wait time increases in ticks as the Fibonacci series, so it tries less
frequently as time passes.
Since errors might only happen in certain modes because of the SQL commands issued in those modes,
innotop keeps track of which mode caused the error. If you switch to a different mode, innotop will
retry the connection instead of waiting.
By default innotop will display the problem in red text at the bottom of the first table on the screen.
You can disable this behavior with the "show_cxn_errors_in_tbl" configuration option, which is enabled by
default. If the "debug" option is enabled, innotop will display the error at the bottom of every table,
not just the first. And if "show_cxn_errors" is enabled, innotop will print the error text to STDOUT as
well. Error messages might only display in the mode that caused the error, depending on the mode and
whether innotop is avoiding querying that connection.
NON-INTERACTIVE OPERATION
You can run innotop in non-interactive mode, in which case it is entirely controlled from the
configuration file and command-line options. To start innotop in non-interactive mode, give the
L"<--nonint"> command-line option. This changes innotop's behavior in the following ways:
• Certain Perl modules are not loaded. Term::Readline is not loaded, since innotop doesn't prompt
interactively. Term::ANSIColor and Win32::Console::ANSI modules are not loaded. Term::ReadKey is
still used, since innotop may have to prompt for connection passwords when starting up.
• innotop does not clear the screen after each tick.
• innotop does not persist any changes to the configuration file.
• If "--count" is given and innotop is in incremental mode (see "status_inc" and "--inc"), innotop
actually refreshes one more time than specified so it can print incremental statistics. This
suppresses output during the first tick, so innotop may appear to hang.
• innotop only displays the first table in each mode. This is so the output can be easily processed
with other command-line utilities such as awk and sed. To change which tables display in each mode,
see "TABLES". Since "Q: Query List" mode is so important, innotop automatically disables the
"q_header" table. This ensures you'll see the "processlist" table, even if you have innotop
configured to show the q_header table during interactive operation. Similarly, in "T: InnoDB
Transactions" mode, the "t_header" table is suppressed so you see only the "innodb_transactions"
table.
• All output is tab-separated instead of being column-aligned with whitespace, and innotop prints the
full contents of each table instead of only printing one screenful at a time.
• innotop only prints column headers once instead of every tick (see "hide_hdr"). innotop does not
print table captions (see "display_table_captions"). innotop ensures there are no empty lines in the
output.
• innotop does not honor the "shorten" transformation, which normally shortens some numbers to human-
readable formats.
• innotop does not print a status line (see "INNOTOP STATUS").
CONFIGURING
Nearly everything about innotop is configurable. Most things are possible to change with built-in
commands, but you can also edit the configuration file.
While running innotop, press the '$' key to bring up the configuration editing dialog. Press another key
to select the type of data you want to edit:
S: Statement Sleep Times
Edits SQL statement sleep delays, which make innotop pause for the specified amount of time after
executing a statement. See "SQL STATEMENTS" for a definition of each statement and what it does. By
default innotop does not delay after any statements.
This feature is included so you can customize the side-effects caused by monitoring your server. You
may not see any effects, but some innotop users have noticed that certain MySQL versions under very
high load with InnoDB enabled take longer than usual to execute SHOW GLOBAL STATUS. If innotop calls
SHOW FULL PROCESSLIST immediately afterward, the processlist contains more queries than the machine
actually averages at any given moment. Configuring innotop to pause briefly after calling SHOW
GLOBAL STATUS alleviates this effect.
Sleep times are stored in the "stmt_sleep_times" section of the configuration file. Fractional-
second sleeps are supported, subject to your hardware's limitations.
c: Edit Columns
Starts the table editor on one of the displayed tables. See "TABLE EDITOR". An alternative way to
start the table editor without entering the configuration dialog is with the '^' key.
g: General Configuration
Starts the configuration editor to edit global and mode-specific configuration variables (see
"MODES"). innotop prompts you to choose a variable from among the global and mode-specific ones
depending on the current mode.
k: Row-Coloring Rules
Starts the row-coloring rules editor on one of the displayed table(s). See "COLORS" for details.
p: Manage Plugins
Starts the plugin configuration editor. See "PLUGINS" for details.
s: Server Groups
Lets you create and edit server groups. See "SERVER GROUPS".
t: Choose Displayed Tables
Lets you choose which tables to display in this mode. See "MODES" and "TABLES".
CONFIGURATION FILE
innotop's default configuration file locations are $HOME/.innotop and /etc/innotop/innotop.conf, and they
are looked for in that order. If the first configuration file exists, the second will not be processed.
Those can be overridden with the "--config" command-line option. You can edit it by hand safely, however
innotop reads the configuration file when it starts, and, if readonly is set to 0, writes it out again
when it exits. Thus, if readonly is set to 0, any changes you make by hand while innotop is running will
be lost.
innotop doesn't store its entire configuration in the configuration file. It has a huge set of default
configuration values that it holds only in memory, and the configuration file only overrides these
defaults. When you customize a default setting, innotop notices, and then stores the customizations into
the file. This keeps the file size down, makes it easier to edit, and makes upgrades easier.
A configuration file is read-only be default. You can override that with "--write". See "readonly".
The configuration file is arranged into sections like an INI file. Each section begins with
[section-name] and ends with [/section-name]. Each section's entries have a different syntax depending
on the data they need to store. You can put comments in the file; any line that begins with a #
character is a comment. innotop will not read the comments, so it won't write them back out to the file
when it exits. Comments in read-only configuration files are still useful, though.
The first line in the file is innotop's version number. This lets innotop notice when the file format is
not backwards-compatible, and upgrade smoothly without destroying your customized configuration.
The following list describes each section of the configuration file and the data it contains:
general
The 'general' section contains global configuration variables and variables that may be mode-
specific, but don't belong in any other section. The syntax is a simple key=value list. innotop
writes a comment above each value to help you edit the file by hand.
S_func
Controls S mode presentation (see "S: Variables & Status"). If g, values are graphed; if s,
values are like vmstat; if p, values are in a pivoted table.
S_set
Specifies which set of variables to display in "S: Variables & Status" mode. See "VARIABLE
SETS".
auto_wipe_dl
Instructs innotop to automatically wipe large deadlocks when it notices them. When this happens
you may notice a slight delay. At the next tick, you will usually see the information that was
being truncated by the large deadlock.
charset
Specifies what kind of characters to allow through the "no_ctrl_char" transformation. This keeps
non-printable characters from confusing a terminal when you monitor queries that contain binary
data, such as images.
The default is 'ascii', which considers anything outside normal ASCII to be a control character.
The other allowable values are 'unicode' and 'none'. 'none' considers every character a control
character, which can be useful for collapsing ALL text fields in queries.
cmd_filter
This is the prefix that filters variables in "C: Command Summary" mode.
color
Whether terminal coloring is permitted.
cxn_timeout
On MySQL versions 4.0.3 and newer, this variable is used to set the connection's timeout, so
MySQL doesn't close the connection if it is not used for a while. This might happen because a
connection isn't monitored in a particular mode, for example.
debug
This option enables more verbose errors and makes innotop more strict in some places. It can
help in debugging filters and other user-defined code. It also makes innotop write a lot of
information to "debugfile" when there is a crash.
debugfile
A file to which innotop will write information when there is a crash. See "FILES".
display_table_captions
innotop displays a table caption above most tables. This variable suppresses or shows captions
on all tables globally. Some tables are configured with the hide_caption property, which
overrides this.
global
Whether to show GLOBAL variables and status. innotop only tries to do this on servers which
support the GLOBAL option to SHOW VARIABLES and SHOW STATUS. In some MySQL versions, you need
certain privileges to do this; if you don't have them, innotop will not be able to fetch any
variable and status data. This configuration variable lets you run innotop and fetch what data
you can even without the elevated privileges.
I can no longer find or reproduce the situation where GLOBAL wasn't allowed, but I know there was
one.
graph_char
Defines the character to use when drawing graphs in "S: Variables & Status" mode.
header_highlight
Defines how to highlight column headers. This only works if Term::ANSIColor is available. Valid
values are 'bold' and 'underline'.
hide_hdr
Hides column headers globally.
interval
The interval at which innotop will refresh its data (ticks). The interval is implemented as a
sleep time between ticks, so the true interval will vary depending on how long it takes innotop
to fetch and render data.
This variable accepts fractions of a second.
mode
The mode in which innotop should start. Allowable arguments are the same as the key presses that
select a mode interactively. See "MODES".
num_digits
How many digits to show in fractional numbers and percents. This variable's range is between 0
and 9 and can be set directly from "S: Variables & Status" mode with the '+' and '-' keys. It is
used in the "set_precision", "shorten", and "percent" transformations.
num_status_sets
Controls how many sets of status variables to display in pivoted "S: Variables & Status" mode.
It also controls the number of old sets of variables innotop keeps in its memory, so the larger
this variable is, the more memory innotop uses.
plugin_dir
Specifies where plugins can be found. By default, innotop stores plugins in the 'plugins'
subdirectory of your innotop configuration directory.
readonly
Whether the configuration file is readonly. This cannot be set interactively.
show_cxn_errors
Makes innotop print connection errors to STDOUT. See "ERROR HANDLING".
show_cxn_errors_in_tbl
Makes innotop display connection errors as rows in the first table on screen. See "ERROR
HANDLING".
show_percent
Adds a '%' character after the value returned by the "percent" transformation.
show_statusbar
Controls whether to show the status bar in the display. See "INNOTOP STATUS".
skip_innodb
Disables fetching SHOW INNODB STATUS, in case your server(s) do not have InnoDB enabled and you
don't want innotop to try to fetch it. This can also be useful when you don't have the SUPER
privilege, required to run SHOW INNODB STATUS.
spark
Specifies how wide a spark chart is. There are two ASCII spark charts in A mode, showing QPS and
User_threads_running.
status_inc
Whether to show absolute or incremental values for status variables. Incremental values are
calculated as an offset from the last value innotop saw for that variable. This is a global
setting, but will probably become mode-specific at some point. Right now it is honored a bit
inconsistently; some modes don't pay attention to it.
timeformat
The C-style strftime()-compatible format for the timestamp line to be printed in -n mode when -t
is set.
plugins
This section holds a list of package names of active plugins. If the plugin exists, innotop will
activate it. See "PLUGINS" for more information.
filters
This section holds user-defined filters (see "FILTERS"). Each line is in the format
filter_name=text='filter text' tbls='table list'.
The filter text is the text of the subroutine's code. The table list is a list of tables to which
the filter can apply. By default, user-defined filters apply to the table for which they were
created, but you can manually override that by editing the definition in the configuration file.
active_filters
This section stores which filters are active on each table. Each line is in the format
table_name=filter_list.
tbl_meta
This section stores user-defined or user-customized columns (see "COLUMNS"). Each line is in the
format col_name=properties, where the properties are a name=quoted-value list.
connections
This section holds the server connections you have defined. Each line is in the format
name=properties, where the properties are a name=value list. The properties are self-explanatory,
and the only one that is treated specially is 'pass' which is only present if 'savepass' is set.
This section of the configuration file will be skipped if any DSN, username, or password command-line
options are used. See "SERVER CONNECTIONS".
active_connections
This section holds a list of which connections are active in each mode. Each line is in the format
mode_name=connection_list.
server_groups
This section holds server groups. Each line is in the format name=connection_list. See "SERVER
GROUPS".
active_server_groups
This section holds a list of which server group is active in each mode. Each line is in the format
mode_name=server_group.
max_values_seen
This section holds the maximum values seen for variables. This is used to scale the graphs in "S:
Variables & Status" mode. Each line is in the format name=value.
active_columns
This section holds table column lists. Each line is in the format tbl_name=column_list. See
"COLUMNS".
sort_cols
This section holds the sort definition. Each line is in the format tbl_name=column_list. If a
column is prefixed with '-', that column sorts descending. See "SORTING".
visible_tables
This section defines which tables are visible in each mode. Each line is in the format
mode_name=table_list. See "TABLES".
varsets
This section defines variable sets for use in "S: Status & Variables" mode. Each line is in the
format name=variable_list. See "VARIABLE SETS".
colors
This section defines colorization rules. Each line is in the format tbl_name=property_list. See
"COLORS".
stmt_sleep_times
This section contains statement sleep times. Each line is in the format statement_name=sleep_time.
See "S: Statement Sleep Times".
group_by
This section contains column lists for table group_by expressions. Each line is in the format
tbl_name=column_list. See "GROUPING".
CUSTOMIZING
You can customize innotop a great deal. For example, you can:
• Choose which tables to display, and in what order.
• Choose which columns are in those tables, and create new columns.
• Filter which rows display with built-in filters, user-defined filters, and quick-filters.
• Sort the rows to put important data first or group together related rows.
• Highlight rows with color.
• Customize the alignment, width, and formatting of columns, and apply transformations to columns to
extract parts of their values or format the values as you wish (for example, shortening large numbers
to familiar units).
• Design your own expressions to extract and combine data as you need. This gives you unlimited
flexibility.
All these and more are explained in the following sections.
TABLES
A table is what you'd expect: a collection of columns. It also has some other properties, such as a
caption. Filters, sorting rules, and colorization rules belong to tables and are covered in later
sections.
Internally, table meta-data is defined in a data structure called %tbl_meta. This hash holds all built-
in table definitions, which contain a lot of default instructions to innotop. The meta-data includes the
caption, a list of columns the user has customized, a list of columns, a list of visible columns, a list
of filters, color rules, a sort-column list, sort direction, and some information about the table's data
sources. Most of this is customizable via the table editor (see "TABLE EDITOR").
You can choose which tables to show by pressing the '$' key. See "MODES" and "TABLES".
The table life-cycle is as follows:
• Each table begins with a data source, which is an array of hashes. See below for details on data
sources.
• Each element of the data source becomes a row in the final table.
• For each element in the data source, innotop extracts values from the source and creates a row. This
row is another hash, which later steps will refer to as $set. The values innotop extracts are
determined by the table's columns. Each column has an extraction subroutine, compiled from an
expression (see "EXPRESSIONS"). The resulting row is a hash whose keys are named the same as the
column name.
• innotop filters the rows, removing those that don't need to be displayed. See "FILTERS".
• innotop sorts the rows. See "SORTING".
• innotop groups the rows together, if specified. See "GROUPING".
• innotop colorizes the rows. See "COLORS".
• innotop transforms the column values in each row. See "TRANSFORMATIONS".
• innotop optionally pivots the rows (see "PIVOTING"), then filters and sorts them.
• innotop formats and justifies the rows as a table. During this step, innotop applies further
formatting to the column values, including alignment, maximum and minimum widths. innotop also does
final error checking to ensure there are no crashes due to undefined values. innotop then adds a
caption if specified, and the table is ready to print.
The lifecycle is slightly different if the table is pivoted, as noted above. To clarify, if the table is
pivoted, the process is extract, group, transform, pivot, filter, sort, create. If it's not pivoted, the
process is extract, filter, sort, group, color, transform, create. This slightly convoluted process
doesn't map all that well to SQL, but pivoting complicates things pretty thoroughly. Roughly speaking,
filtering and sorting happen as late as needed to effect the final result as you might expect, but as
early as possible for efficiency.
Each built-in table is described below:
adaptive_hash_index
Displays data about InnoDB's adaptive hash index. Data source: "STATUS_VARIABLES".
buffer_pool
Displays data about InnoDB's buffer pool. Data source: "STATUS_VARIABLES".
cmd_summary
Displays weighted status variables. Data source: "STATUS_VARIABLES".
deadlock_locks
Shows which locks were held and waited for by the last detected deadlock. Data source:
"DEADLOCK_LOCKS".
deadlock_transactions
Shows transactions involved in the last detected deadlock. Data source: "DEADLOCK_TRANSACTIONS".
explain
Shows the output of EXPLAIN. Data source: "EXPLAIN".
file_io_misc
Displays data about InnoDB's file and I/O operations. Data source: "STATUS_VARIABLES".
fk_error
Displays various data about InnoDB's last foreign key error. Data source: "STATUS_VARIABLES".
health_dashboard
Displays an overall summary of servers, one server per line, for monitoring. Data source:
"STATUS_VARIABLES", "MASTER_SLAVE", "PROCESSLIST_STATS".
index_statistics
Displays data from the INDEX_STATISTICS table in Percona-enhanced servers.
index_table_statistics
Displays data from the INDEX_STATISTICS and TABLE_STATISTICS tables in Percona-enhanced servers. It
joins the two together, grouped by the database and table name. It is the default view in "U: User
Statistics" mode, and makes it easy to see what tables are hot, how many rows are read from indexes,
how many changes are made, and how many changes are made to indexes.
innodb_blocked_blocker
Displays InnoDB locks and lock waits. Data source: "INNODB_BLOCKED_BLOCKER".
innodb_locks
Displays InnoDB locks. Data source: "INNODB_LOCKS".
innodb_transactions
Displays data about InnoDB's current transactions. Data source: "INNODB_TRANSACTIONS".
insert_buffers
Displays data about InnoDB's insert buffer. Data source: "STATUS_VARIABLES".
io_threads
Displays data about InnoDB's I/O threads. Data source: "IO_THREADS".
log_statistics
Displays data about InnoDB's logging system. Data source: "STATUS_VARIABLES".
master_status
Displays replication master status. Data source: "STATUS_VARIABLES".
open_tables
Displays open tables. Data source: "OPEN_TABLES".
page_statistics
Displays InnoDB page statistics. Data source: "STATUS_VARIABLES".
pending_io
Displays InnoDB pending I/O operations. Data source: "STATUS_VARIABLES".
processlist
Displays current MySQL processes (threads/connections). Data source: "PROCESSLIST".
q_header
Displays various status values. Data source: "STATUS_VARIABLES".
row_operation_misc
Displays data about InnoDB's row operations. Data source: "STATUS_VARIABLES".
row_operations
Displays data about InnoDB's row operations. Data source: "STATUS_VARIABLES".
semaphores
Displays data about InnoDB's semaphores and mutexes. Data source: "STATUS_VARIABLES".
slave_io_status
Displays data about the slave I/O thread. Data source: "STATUS_VARIABLES".
slave_sql_status
Displays data about the slave SQL thread. Data source: "STATUS_VARIABLES".
table_statistics
Displays data from the TABLE_STATISTICS table in Percona-enhanced servers.
t_header
Displays various InnoDB status values. Data source: "STATUS_VARIABLES".
var_status
Displays user-configurable data. Data source: "STATUS_VARIABLES".
wait_array
Displays data about InnoDB's OS wait array. Data source: "OS_WAIT_ARRAY".
COLUMNS
Columns belong to tables. You can choose a table's columns by pressing the '^' key, which starts the
"TABLE EDITOR" and lets you choose and edit columns. Pressing 'e' from within the table editor lets you
edit the column's properties:
• hdr: a column header. This appears in the first row of the table.
• just: justification. '-' means left-justified and '' means right-justified, just as with printf
formatting codes (not a coincidence).
• dec: whether to further align the column on the decimal point.
• num: whether the column is numeric. This affects how values are sorted (lexically or numerically).
• label: a small note about the column, which appears in dialogs that help the user choose columns.
• src: an expression that innotop uses to extract the column's data from its source (see "DATA
SOURCES"). See "EXPRESSIONS" for more on expressions.
• minw: specifies a minimum display width. This helps stabilize the display, which makes it easier to
read if the data is changing frequently.
• maxw: similar to minw.
• trans: a list of column transformations. See "TRANSFORMATIONS".
• agg: an aggregate function. See "GROUPING". The default is "first".
• aggonly: controls whether the column only shows when grouping is enabled on the table (see
"GROUPING"). By default, this is disabled. This means columns will always be shown by default,
whether grouping is enabled or not. If a column's aggonly is set true, the column will appear when
you toggle grouping on the table. Several columns are set this way, such as the count column on
"processlist" and "innodb_transactions", so you don't see a count when the grouping isn't enabled,
but you do when it is.
• agghide: the reverse of aggonly. The column is hidden when grouping is enabled.
FILTERS
Filters remove rows from the display. They behave much like a WHERE clause in SQL. innotop has several
built-in filters, which remove irrelevant information like inactive queries, but you can define your own
as well. innotop also lets you create quick-filters, which do not get saved to the configuration file,
and are just an easy way to quickly view only some rows.
You can enable or disable a filter on any table. Press the '%' key (mnemonic: % looks kind of like a
line being filtered between two circles) and choose which table you want to filter, if asked. You'll
then see a list of possible filters and a list of filters currently enabled for that table. Type the
names of filters you want to apply and press Enter.
USER-DEFINED FILTERS
If you type a name that doesn't exist, innotop will prompt you to create the filter. Filters are easy to
create if you know Perl, and not hard if you don't. What you're doing is creating a subroutine that
returns true if the row should be displayed. The row is a hash reference passed to your subroutine as
$set.
For example, imagine you want to filter the processlist table so you only see queries that have been
running more than five minutes. Type a new name for your filter, and when prompted for the subroutine
body, press TAB to initiate your terminal's auto-completion. You'll see the names of the columns in the
"processlist" table (innotop generally tries to help you with auto-completion lists). You want to filter
on the 'time' column. Type the text "$set->{time} > 300" to return true when the query is more than five
minutes old. That's all you need to do.
In other words, the code you're typing is surrounded by an implicit context, which looks like this:
sub filter {
my ( $set ) = @_;
# YOUR CODE HERE
}
If your filter doesn't work, or if something else suddenly behaves differently, you might have made an
error in your filter, and innotop is silently catching the error. Try enabling "debug" to make innotop
throw an error instead.
QUICK-FILTERS
innotop's quick-filters are a shortcut to create a temporary filter that doesn't persist when you restart
innotop. To create a quick-filter, press the '/' key. innotop will prompt you for the column name and
filter text. Again, you can use auto-completion on column names. The filter text can be just the text
you want to "search for." For example, to filter the "processlist" table on queries that refer to the
products table, type '/' and then 'info product'. Internally, the filter is compiled into a subroutine
like this:
sub filter {
my ( $set ) = @_;
$set->{info} =~ m/product/;
}
The filter text can actually be any Perl regular expression, but of course a literal string like
'product' works fine as a regular expression.
What if you want the filter to discard matching rows, rather than showing matching rows? If you're
familiar with Perl regular expressions, you might guess how to do this. You have to use a zero-width
negative lookahead assertion. If you don't know what that means, don't worry. Let's filter out all rows
where the command is Gandalf. Type the following:
1. /
2. cmd ^(?!Gandalf)
Behind the scenes innotop compiles the quick-filter into a specially tagged filter that is otherwise like
any other filter. It just isn't saved to the configuration file.
To clear quick-filters, press the '\' key and innotop will clear them all at once.
SORTING
innotop has sensible built-in defaults to sort the most important rows to the top of the table. Like
anything else in innotop, you can customize how any table is sorted.
To start the sort dialog, start the "TABLE EDITOR" with the '^' key, choose a table if necessary, and
press the 's' key. You'll see a list of columns you can use in the sort expression and the current sort
expression, if any. Enter a list of columns by which you want to sort and press Enter. If you want to
reverse sort, prefix the column name with a minus sign. For example, if you want to sort by column a
ascending, then column b descending, type 'a -b'. You can also explicitly add a + in front of columns
you want to sort ascending, but it's not required.
Some modes have keys mapped to open this dialog directly, and to quickly reverse sort direction. Press
'?' as usual to see which keys are mapped in any mode.
GROUPING
innotop can group, or aggregate, rows together (the terms are used interchangeably). This is quite
similar to an SQL GROUP BY clause. You can specify to group on certain columns, or if you don't specify
any, the entire set of rows is treated as one group. This is quite like SQL so far, but unlike SQL, you
can also select un-grouped columns. innotop actually aggregates every column. If you don't explicitly
specify a grouping function, the default is 'first'. This is basically a convenience so you don't have
to specify an aggregate function for every column you want in the result.
You can quickly toggle grouping on a table with the '=' key, which toggles its aggregate property. This
property doesn't persist to the config file.
The columns by which the table is grouped are specified in its group_by property. When you turn grouping
on, innotop places the group_by columns at the far left of the table, even if they're not supposed to be
visible. The rest of the visible columns appear in order after them.
Two tables have default group_by lists and a count column built in: "processlist" and
"innodb_transactions". The grouping is by connection and status, so you can quickly see how many queries
or transactions are in a given status on each server you're monitoring. The time columns are aggregated
as a sum; other columns are left at the default 'first' aggregation.
By default, the table shown in "S: Variables & Status" mode also uses grouping so you can monitor
variables and status across many servers. The default aggregation function in this mode is 'avg'.
Valid grouping functions are defined in the %agg_funcs hash. They include
first
Returns the first element in the group.
count
Returns the number of elements in the group, including undefined elements, much like SQL's COUNT(*).
avg Returns the average of defined elements in the group.
sum Returns the sum of elements in the group.
Here's an example of grouping at work. Suppose you have a very busy server with hundreds of open
connections, and you want to see how many connections are in what status. Using the built-in grouping
rules, you can press 'Q' to enter "Q: Query List" mode. Press '=' to toggle grouping (if necessary,
select the "processlist" table when prompted).
Your display might now look like the following:
Query List (? for help) localhost, 32:33, 0.11 QPS, 1 thd, 5.0.38-log
CXN Cmd Cnt ID User Host Time Query
localhost Query 49 12933 webusr localhost 19:38 SELECT * FROM
localhost Sending Da 23 2383 webusr localhost 12:43 SELECT col1,
localhost Sleep 120 140 webusr localhost 5:18:12
localhost Statistics 12 19213 webusr localhost 01:19 SELECT * FROM
That's actually quite a worrisome picture. You've got a lot of idle connections (Sleep), and some
connections executing queries (Query and Sending Data). That's okay, but you also have a lot in
Statistics status, collectively spending over a minute. That means the query optimizer is having a
really hard time generating execution plans for your statements. Something is wrong; it should normally
take milliseconds to plan queries. You might not have seen this pattern if you didn't look at your
connections in aggregate. (This is a made-up example, but it can happen in real life).
PIVOTING
innotop can pivot a table for more compact display, similar to a Pivot Table in a spreadsheet (also known
as a crosstab). Pivoting a table makes columns into rows. Assume you start with this table:
foo bar
=== ===
1 3
2 4
After pivoting, the table will look like this:
name set0 set1
==== ==== ====
foo 1 2
bar 3 4
To get reasonable results, you might need to group as well as pivoting. innotop currently does this for
"S: Variables & Status" mode.
COLORS
By default, innotop highlights rows with color so you can see at a glance which rows are more important.
You can customize the colorization rules and add your own to any table. Open the table editor with the
'^' key, choose a table if needed, and press 'o' to open the color editor dialog.
The color editor dialog displays the rules applied to the table, in the order they are evaluated. Each
row is evaluated against each rule to see if the rule matches the row; if it does, the row gets the
specified color, and no further rules are evaluated. The rules look like the following:
state eq Locked black on_red
cmd eq Sleep white
user eq system user white
cmd eq Connect white
cmd eq Binlog Dump white
time > 600 red
time > 120 yellow
time > 60 green
time > 30 cyan
This is the default rule set for the "processlist" table. In order of priority, these rules make locked
queries black on a red background, "gray out" connections from replication and sleeping queries, and make
queries turn from cyan to red as they run longer.
(For some reason, the ANSI color code "white" is actually a light gray. Your terminal's display may
vary; experiment to find colors you like).
You can use keystrokes to move the rules up and down, which re-orders their priority. You can also
delete rules and add new ones. If you add a new rule, innotop prompts you for the column, an operator
for the comparison, a value against which to compare the column, and a color to assign if the rule
matches. There is auto-completion and prompting at each step.
The value in the third step needs to be correctly quoted. innotop does not try to quote the value
because it doesn't know whether it should treat the value as a string or a number. If you want to
compare the column against a string, as for example in the first rule above, you should enter 'Locked'
surrounded by quotes. If you get an error message about a bareword, you probably should have quoted
something.
EXPRESSIONS
Expressions are at the core of how innotop works, and are what enables you to extend innotop as you wish.
Recall the table lifecycle explained in "TABLES". Expressions are used in the earliest step, where it
extracts values from a data source to form rows.
It does this by calling a subroutine for each column, passing it the source data set, a set of current
values, and a set of previous values. These are all needed so the subroutine can calculate things like
the difference between this tick and the previous tick.
The subroutines that extract the data from the set are compiled from expressions. This gives
significantly more power than just naming the values to fill the columns, because it allows the column's
value to be calculated from whatever data is necessary, but avoids the need to write complicated and
lengthy Perl code.
innotop begins with a string of text that can look as simple as a value's name or as complicated as a
full-fledged Perl expression. It looks at each 'bareword' token in the string and decides whether it's
supposed to be a key into the $set hash. A bareword is an unquoted value that isn't already surrounded
by code-ish things like dollar signs or curly brackets. If innotop decides that the bareword isn't a
function or other valid Perl code, it converts it into a hash access. After the whole string is
processed, innotop compiles a subroutine, like this:
sub compute_column_value {
my ( $set, $cur, $pre ) = @_;
my $val = # EXPANDED STRING GOES HERE
return $val;
}
Here's a concrete example, taken from the header table "q_header" in "Q: Query List" mode. This
expression calculates the qps, or Queries Per Second, column's values, from the values returned by SHOW
STATUS:
Questions/Uptime_hires
innotop decides both words are barewords, and transforms this expression into the following Perl code:
$set->{Questions}/$set->{Uptime_hires}
When surrounded by the rest of the subroutine's code, this is executable Perl that calculates a high-
resolution queries-per-second value.
The arguments to the subroutine are named $set, $cur, and $pre. In most cases, $set and $cur will be the
same values. However, if "status_inc" is set, $cur will not be the same as $set, because $set will
already contain values that are the incremental difference between $cur and $pre.
Every column in innotop is computed by subroutines compiled in the same fashion. There is no difference
between innotop's built-in columns and user-defined columns. This keeps things consistent and
predictable.
TRANSFORMATIONS
Transformations change how a value is rendered. For example, they can take a number of seconds and
display it in H:M:S format. The following transformations are defined:
commify
Adds commas to large numbers every three decimal places.
distill
Distills SQL into verb-noun-noun format for quick comprehension.
dulint_to_int
Accepts two unsigned integers and converts them into a single longlong. This is useful for certain
operations with InnoDB, which uses two integers as transaction identifiers, for example.
fuzzy_time
Converts a number of seconds into a friendly, readable value like "1h35m".
no_ctrl_char
Removes quoted control characters from the value. This is affected by the "charset" configuration
variable.
This transformation only operates within quoted strings, for example, values to a SET clause in an
UPDATE statement. It will not alter the UPDATE statement, but will collapse the quoted string to
[BINARY] or [TEXT], depending on the charset.
percent
Converts a number to a percentage by multiplying it by two, formatting it with "num_digits" digits
after the decimal point, and optionally adding a percent sign (see "show_percent").
secs_to_time
Formats a number of seconds as time in days+hours:minutes:seconds format.
set_precision
Formats numbers with "num_digits" number of digits after the decimal point.
shorten
Formats a number as a unit of 1024 (k/M/G/T) and with "num_digits" number of digits after the decimal
point.
TABLE EDITOR
The innotop table editor lets you customize tables with keystrokes. You start the table editor with the
'^' key. If there's more than one table on the screen, it will prompt you to choose one of them. Once
you do, innotop will show you something like this:
Editing table definition for Buffer Pool. Press ? for help, q to quit.
name hdr label src
cxn CXN Connection from which cxn
buf_pool_size Size Buffer pool size IB_bp_buf_poo
buf_free Free Bufs Buffers free in the b IB_bp_buf_fre
pages_total Pages Pages total IB_bp_pages_t
pages_modified Dirty Pages Pages modified (dirty IB_bp_pages_m
buf_pool_hit_rate Hit Rate Buffer pool hit rate IB_bp_buf_poo
total_mem_alloc Memory Total memory allocate IB_bp_total_m
add_pool_alloc Add'l Pool Additional pool alloca IB_bp_add_poo
The first line shows which table you're editing, and reminds you again to press '?' for a list of key
mappings. The rest is a tabular representation of the table's columns, because that's likely what you're
trying to edit. However, you can edit more than just the table's columns; this screen can start the
filter editor, color rule editor, and more.
Each row in the display shows a single column in the table you're editing, along with a couple of its
properties such as its header and source expression (see "EXPRESSIONS").
The key mappings are Vim-style, as in many other places. Pressing 'j' and 'k' moves the highlight up or
down. You can then (d)elete or (e)dit the highlighted column. You can also (a)dd a column to the table.
This actually just activates one of the columns already defined for the table; it prompts you to choose
from among the columns available but not currently displayed. Finally, you can re-order the columns with
the '+' and '-' keys.
You can do more than just edit the columns with the table editor, you can also edit other properties,
such as the table's sort expression and group-by expression. Press '?' to see the full list, of course.
If you want to really customize and create your own column, as opposed to just activating a built-in one
that's not currently displayed, press the (n)ew key, and innotop will prompt you for the information it
needs:
• The column name: this needs to be a word without any funny characters, e.g. just letters, numbers and
underscores.
• The column header: this is the label that appears at the top of the column, in the table header.
This can have spaces and funny characters, but be careful not to make it too wide and waste space on-
screen.
• The column's data source: this is an expression that determines what data from the source (see
"TABLES") innotop will put into the column. This can just be the name of an item in the source, or
it can be a more complex expression, as described in "EXPRESSIONS".
Once you've entered the required data, your table has a new column. There is no difference between this
column and the built-in ones; it can have all the same properties and behaviors. innotop will write the
column's definition to the configuration file, so it will persist across sessions.
Here's an example: suppose you want to track how many times your slaves have retried transactions.
According to the MySQL manual, the Slave_retried_transactions status variable gives you that data: "The
total number of times since startup that the replication slave SQL thread has retried transactions. This
variable was added in version 5.0.4." This is appropriate to add to the "slave_sql_status" table.
To add the column, switch to the replication-monitoring mode with the 'M' key, and press the '^' key to
start the table editor. When prompted, choose slave_sql_status as the table, then press 'n' to create
the column. Type 'retries' as the column name, 'Retries' as the column header, and
'Slave_retried_transactions' as the source. Now the column is created, and you see the table editor
screen again. Press 'q' to exit the table editor, and you'll see your column at the end of the table.
VARIABLE SETS
Variable sets are used in "S: Variables & Status" mode to define more easily what variables you want to
monitor. Behind the scenes they are compiled to a list of expressions, and then into a column list so
they can be treated just like columns in any other table, in terms of data extraction and
transformations. However, you're protected from the tedious details by a syntax that ought to feel very
natural to you: a SQL SELECT list.
The data source for variable sets, and indeed the entire S mode, is the combination of SHOW STATUS, SHOW
VARIABLES, and SHOW INNODB STATUS. Imagine that you had a huge table with one column per variable
returned from those statements. That's the data source for variable sets. You can now query this data
source just like you'd expect. For example:
Questions, Uptime, Questions/Uptime as QPS
Behind the scenes innotop will split that variable set into three expressions, compile them and turn them
into a table definition, then extract as usual. This becomes a "variable set," or a "list of variables
you want to monitor."
innotop lets you name and save your variable sets, and writes them to the configuration file. You can
choose which variable set you want to see with the 'c' key, or activate the next and previous sets with
the '>' and '<' keys. There are many built-in variable sets as well, which should give you a good start
for creating your own. Press 'e' to edit the current variable set, or just to see how it's defined. To
create a new one, just press 'c' and type its name.
You may want to use some of the functions listed in "TRANSFORMATIONS" to help format the results. In
particular, "set_precision" is often useful to limit the number of digits you see. Extending the above
example, here's how:
Questions, Uptime, set_precision(Questions/Uptime) as QPS
Actually, this still needs a little more work. If your "interval" is less than one second, you might be
dividing by zero because Uptime is incremental in this mode by default. Instead, use Uptime_hires:
Questions, Uptime, set_precision(Questions/Uptime_hires) as QPS
This example is simple, but it shows how easy it is to choose which variables you want to monitor.
PLUGINS
innotop has a simple but powerful plugin mechanism by which you can extend or modify its existing
functionality, and add new functionality. innotop's plugin functionality is event-based: plugins
register themselves to be called when events happen. They then have a chance to influence the event.
An innotop plugin is a Perl module (.pm) file placed in innotop's "plugin_dir" directory. On UNIX
systems, you can place a symbolic link to the module instead of putting the actual file there. innotop
automatically discovers files named "*.pm". If there is a corresponding entry in the "plugins"
configuration file section, innotop loads and activates the plugin.
The module must conform to innotop's plugin interface. Additionally, the source code of the module must
be written in such a way that innotop can inspect the file and determine the package name and
description.
Package Source Convention
innotop inspects the plugin module's source to determine the Perl package name. It looks for a line of
the form "package Foo;" and if found, considers the plugin's package name to be Foo. Of course the
package name can be a valid Perl package name such as Foo::Bar, with double colons (::) and so on.
It also looks for a description in the source code, to make the plugin editor more human-friendly. The
description is a comment line of the form "# description: Foo", where "Foo" is the text innotop will
consider to be the plugin's description.
Plugin Interface
The innotop plugin interface is quite simple: innotop expects the plugin to be an object-oriented module
it can call certain methods on. The methods are
new(%variables)
This is the plugin's constructor. It is passed a hash of innotop's variables, which it can
manipulate (see "Plugin Variables"). It must return a reference to the newly created plugin object.
At construction time, innotop has only loaded the general configuration and created the default
built-in variables with their default contents (which is quite a lot). Therefore, the state of the
program is exactly as in the innotop source code, plus the configuration variables from the "general"
section in the config file.
If your plugin manipulates the variables, it is changing global data, which is shared by innotop and
all plugins. Plugins are loaded in the order they're listed in the config file. Your plugin may
load before or after another plugin, so there is a potential for conflict or interaction between
plugins if they modify data other plugins use or modify.
register_for_events()
This method must return a list of events in which the plugin is interested, if any. See "Plugin
Events" for the defined events. If the plugin returns an event that's not defined, the event is
ignored.
event handlers
The plugin must implement a method named the same as each event for which it has registered. In
other words, if the plugin returns qw(foo bar) from register_for_events(), it must have foo() and
bar() methods. These methods are callbacks for the events. See "Plugin Events" for more details
about each event.
Plugin Variables
The plugin's constructor is passed a hash of innotop's variables, which it can manipulate. It is
probably a good idea if the plugin object saves a copy of it for later use. The variables are defined in
the innotop variable %pluggable_vars, and are as follows:
action_for
A hashref of key mappings. These are innotop's global hot-keys.
agg_funcs
A hashref of functions that can be used for grouping. See "GROUPING".
config
The global configuration hash.
connections
A hashref of connection specifications. These are just specifications of how to connect to a server.
dbhs
A hashref of innotop's database connections. These are actual DBI connection objects.
filters
A hashref of filters applied to table rows. See "FILTERS" for more.
modes
A hashref of modes. See "MODES" for more.
server_groups
A hashref of server groups. See "SERVER GROUPS".
tbl_meta
A hashref of innotop's table meta-data, with one entry per table (see "TABLES" for more information).
trans_funcs
A hashref of transformation functions. See "TRANSFORMATIONS".
var_sets
A hashref of variable sets. See "VARIABLE SETS".
Plugin Events
Each event is defined somewhere in the innotop source code. When innotop runs that code, it executes the
callback function for each plugin that expressed its interest in the event. innotop passes some data for
each event. The events are defined in the %event_listener_for variable, and are as follows:
extract_values($set, $cur, $pre, $tbl)
This event occurs inside the function that extracts values from a data source. The arguments are the
set of values, the current values, the previous values, and the table name.
set_to_tbl
Events are defined at many places in this subroutine, which is responsible for turning an arrayref of
hashrefs into an arrayref of lines that can be printed to the screen. The events all pass the same
data: an arrayref of rows and the name of the table being created. The events are
set_to_tbl_pre_filter, set_to_tbl_pre_sort,set_to_tbl_pre_group, set_to_tbl_pre_colorize,
set_to_tbl_pre_transform, set_to_tbl_pre_pivot, set_to_tbl_pre_create, set_to_tbl_post_create.
draw_screen($lines)
This event occurs inside the subroutine that prints the lines to the screen. $lines is an arrayref
of strings.
Simple Plugin Example
The easiest way to explain the plugin functionality is probably with a simple example. The following
module adds a column to the beginning of every table and sets its value to 1. (If you copy and paste
this example code, be sure to remove the first space from each line; lines such as '# description' must
not start with whitespace).
use strict;
use warnings FATAL => 'all';
package Innotop::Plugin::Example;
# description: Adds an 'example' column to every table
sub new {
my ( $class, %vars ) = @_;
# Store reference to innotop's variables in $self
my $self = bless { %vars }, $class;
# Design the example column
my $col = {
hdr => 'Example',
just => '',
dec => 0,
num => 1,
label => 'Example',
src => 'example', # Get data from this column in the data source
tbl => '',
trans => [],
};
# Add the column to every table.
my $tbl_meta = $vars{tbl_meta};
foreach my $tbl ( values %$tbl_meta ) {
# Add the column to the list of defined columns
$tbl->{cols}->{example} = $col;
# Add the column to the list of visible columns
unshift @{$tbl->{visible}}, 'example';
}
# Be sure to return a reference to the object.
return $self;
}
# I'd like to be called when a data set is being rendered into a table, please.
sub register_for_events {
my ( $self ) = @_;
return qw(set_to_tbl_pre_filter);
}
# This method will be called when the event fires.
sub set_to_tbl_pre_filter {
my ( $self, $rows, $tbl ) = @_;
# Set the example column's data source to the value 1.
foreach my $row ( @$rows ) {
$row->{example} = 1;
}
}
1;
Plugin Editor
The plugin editor lets you view the plugins innotop discovered and activate or deactivate them. Start
the editor by pressing $ to start the configuration editor from any mode. Press the 'p' key to start the
plugin editor. You'll see a list of plugins innotop discovered. You can use the 'j' and 'k' keys to
move the highlight to the desired one, then press the * key to toggle it active or inactive. Exit the
editor and restart innotop for the changes to take effect.
SQL STATEMENTS
innotop uses a limited set of SQL statements to retrieve data from MySQL for display. The statements are
customized depending on the server version against which they are executed; for example, on MySQL 5 and
newer, INNODB_STATUS executes "SHOW ENGINE INNODB STATUS", while on earlier versions it executes "SHOW
INNODB STATUS". The statements are as follows:
Statement SQL executed
=================== ===============================
INDEX_STATISTICS SELECT * FROM INFORMATION_SCHEMA.INDEX_STATISTICS
INNODB_STATUS SHOW [ENGINE] INNODB STATUS
KILL_CONNECTION KILL
KILL_QUERY KILL QUERY
OPEN_TABLES SHOW OPEN TABLES
PROCESSLIST SHOW FULL PROCESSLIST
SHOW_MASTER_LOGS SHOW MASTER LOGS
SHOW_MASTER_STATUS SHOW MASTER STATUS
SHOW_SLAVE_STATUS SHOW SLAVE STATUS
SHOW_STATUS SHOW [GLOBAL] STATUS
SHOW_VARIABLES SHOW [GLOBAL] VARIABLES
TABLE_STATISTICS SELECT * FROM INFORMATION_SCHEMA.TABLE_STATISTICS
DATA SOURCES
Each time innotop extracts values to create a table (see "EXPRESSIONS" and "TABLES"), it does so from a
particular data source. Largely because of the complex data extracted from SHOW INNODB STATUS, this is
slightly messy. SHOW INNODB STATUS contains a mixture of single values and repeated values that form
nested data sets.
Whenever innotop fetches data from MySQL, it adds two extra bits to each set: cxn and Uptime_hires. cxn
is the name of the connection from which the data came. Uptime_hires is a high-resolution version of the
server's Uptime status variable, which is important if your "interval" setting is sub-second.
Here are the kinds of data sources from which data is extracted:
STATUS_VARIABLES
This is the broadest category, into which the most kinds of data fall. It begins with the
combination of SHOW STATUS and SHOW VARIABLES, but other sources may be included as needed, for
example, SHOW MASTER STATUS and SHOW SLAVE STATUS, as well as many of the non-repeated values from
SHOW INNODB STATUS.
DEADLOCK_LOCKS
This data is extracted from the transaction list in the LATEST DETECTED DEADLOCK section of SHOW
INNODB STATUS. It is nested two levels deep: transactions, then locks.
DEADLOCK_TRANSACTIONS
This data is from the transaction list in the LATEST DETECTED DEADLOCK section of SHOW INNODB STATUS.
It is nested one level deep.
EXPLAIN
This data is from the result set returned by EXPLAIN.
INNODB_BLOCKED_BLOCKER
This data is from the INFORMATION_SCHEMA tables related to InnoDB locks and the processlist.
INNODB_TRANSACTIONS
This data is from the TRANSACTIONS section of SHOW INNODB STATUS.
IO_THREADS
This data is from the list of threads in the FILE I/O section of SHOW INNODB STATUS.
INNODB_LOCKS
This data is from the TRANSACTIONS section of SHOW INNODB STATUS and is nested two levels deep.
MASTER_SLAVE
This data is from the combination of SHOW MASTER STATUS and SHOW SLAVE STATUS.
OPEN_TABLES
This data is from SHOW OPEN TABLES.
PROCESSLIST
This data is from SHOW FULL PROCESSLIST.
PROCESSLIST_STATS
This data is from SHOW FULL PROCESSLIST and computes stats such as the maximum time a user query has
been running, and how many user queries are running. A "user query" excludes replication threads.
OS_WAIT_ARRAY
This data is from the SEMAPHORES section of SHOW INNODB STATUS and is nested one level deep. It
comes from the lines that look like this:
--Thread 1568861104 has waited at btr0cur.c line 424 ....
MYSQL PRIVILEGES
• You must connect to MySQL as a user who has the SUPER privilege for many of the functions.
• If you don't have the SUPER privilege, you can still run some functions, but you won't necessarily
see all the same data.
• You need the PROCESS privilege to see the list of currently running queries in Q mode.
• You need special privileges to start and stop slave servers.
• You need appropriate privileges to create and drop the deadlock tables if needed (see "SERVER
CONNECTIONS").
SYSTEM REQUIREMENTS
You need Perl to run innotop, of course. You also need a few Perl modules: DBI, DBD::MariaDB,
Term::ReadKey, and Time::HiRes. These should be included with most Perl distributions, but in case they
are not, I recommend using versions distributed with your operating system or Perl distribution, not from
CPAN. Term::ReadKey in particular has been known to cause problems if installed from CPAN.
If you have Term::ANSIColor, innotop will use it to format headers more readably and compactly. (Under
Microsoft Windows, you also need Win32::Console::ANSI for terminal formatting codes to be honored). If
you install Term::ReadLine, preferably Term::ReadLine::Gnu, you'll get nice auto-completion support.
I run innotop on Gentoo GNU/Linux, Debian and Ubuntu, and I've had feedback from people successfully
running it on Red Hat, CentOS, Solaris, and Mac OSX. I don't see any reason why it won't work on other
UNIX-ish operating systems, but I don't know for sure. It also runs on Windows under ActivePerl without
problem.
innotop has been used on MySQL versions 3.23.58, 4.0.27, 4.1.0, 4.1.22, 5.0.26, 5.1.15, and 5.2.3. If it
doesn't run correctly for you, that is a bug that should be reported.
FILES
$HOMEDIR/.innotop and/or /etc/innotop are used to store configuration information. Files include the
configuration file innotop.conf, the core_dump file which contains verbose error messages if "debug" is
enabled, and the plugins/ subdirectory.
GLOSSARY OF TERMS
tick
A tick is a refresh event, when innotop re-fetches data from connections and displays it.
ACKNOWLEDGEMENTS
The following people and organizations are acknowledged for various reasons. Hopefully no one has been
forgotten.
Aaron Racine, Allen K. Smith, Aurimas Mikalauskas, Bartosz Fenski, Brian Miezejewski, Christian Hammers,
Cyril Scetbon, Dane Miller, David Multer, Dr. Frank Ullrich, Giuseppe Maxia, Google.com Site Reliability
Engineers, Google Code, Jan Pieter Kunst, Jari Aalto, Jay Pipes, Jeremy Zawodny, Johan Idren, Kristian
Kohntopp, Lenz Grimmer, Maciej Dobrzanski, Michiel Betel, MySQL AB, Paul McCullagh, Sebastien Estienne,
Sourceforge.net, Steven Kreuzer, The Gentoo MySQL Team, Trevor Price, Yaar Schnitman, and probably more
people that have not been included.
(If your name has been misspelled, it's probably out of fear of putting international characters into
this documentation; earlier versions of Perl might not be able to compile it then).
COPYRIGHT, LICENSE AND WARRANTY
This program is copyright (c) 2006 Baron Schwartz. Feedback and improvements are welcome.
THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation, version 2; OR the Perl Artistic
License. On UNIX and similar systems, you can issue `man perlgpl' or `man perlartistic' to read these
licenses.
You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335 USA.
Execute innotop and press '!' to see this information at any time.
AUTHOR
Originally written by Baron Schwartz; currently maintained by Aaron Racine.
BUGS
You can report bugs, ask for improvements, and get other help and support at
<https://github.com/innotop/innotop>. There are mailing lists, a source code browser, a bug tracker,
etc. Please use these instead of contacting the maintainer or author directly, as it makes our job
easier and benefits others if the discussions are permanent and public. Of course, if you need to
contact us in private, please do.
perl v5.20.2 2017-01-23 INNOTOP(1)