NAME

       miniupnpd - UPnP Internet Gateway Device Daemon

SYNOPSIS

       miniupnpd [--version] [-f config_file] [-i ext_ifname] [-I ext_ifname6] [-o ext_ip] [-a listening_ip] [-p
       port]  [-d] [-U] [-S] [-N] [-u uuid] [-s serial] [-m model_number] [-t notify_interval] [-P pid_filename]
       [-B down up] [-w url] [-r clean_ruleset_interval] [-A permission rule] [-b BOOTID] [-1]

DESCRIPTION

       miniupnpd act as a UPnP Internet Gateway Device. It is  designed  to  run  on  the  gateway  between  the
       internet  and  a  NAT'ed  LAN.  It  provides  an interface, as defined in the UPnP standard, for enabling
       clients on the LAN to ask for port redirections.

OPTIONS

       -f config_file
              load the config from file. default is /etc/miniupnpd.conf.

       -i ext_ifname
              interface used to connect to the internet.

       -o ext_ip
              address used to connect to the internet.  default address of the interface will  be  used  if  not
              specified.

       -a listening_ip
              address  on  the  LAN.  -a  option  can  by  used  multiple  time  if LAN is subdivised in several
              subnetworks.

       -p port
              port used for HTTP.

       -d     debug mode : do not go to background, output messages  on  console  and  do  not  filter  out  low
              priority messages.

       -U     report system uptime instead of daemon uptime to clients.

       -S     sets "secure" mode : clients can only add mappings to their own ip

       -N     enables NAT-PMP functionality.

       -u uuid
              set the uuid of the UPnP Internet Gateway Device.

       -s serial
              serial number for the UPnP Internet Gateway Device.

       -m model_number
              model number for the UPnP Internet Gateway Device.

       -t notify_interval
              SSDP notify interval in seconds : SSDP announce messages will be broadcasted at this interval.

       -P pid_filename
              pid file. default is /var/run/miniupnpd.pid

       -B down up
              download and upload bitrates reported to clients.

       -w url presentation url. default is first address on LAN, port 80.

       -r clean_ruleset_interval
              (minimum) interval between unused rules cleaning checks.

       -A permission rule
              use following syntax for permission rules :
                (allow|deny) (external port range) ip/mask (internal port range)
              examples :
                "allow 1024-65535 192.168.1.0/24 1024-65535"
                "deny 0-65535 0.0.0.0/0 0-65535"

       -b BOOTID
              sets the value of BOOTID.UPNP.ORG SSDP header

       -1     force reporting IGDv1 in rootDesc when compiled as IGDv2 *use with care*

SEE ALSO

       minissdpd(1) miniupnpc(3)

BUGS

                                                                                                    MINIUPNPD(8)