Provided by: maildir-utils_1.10.8-2build3_amd64 
NAME
muquery - a language for finding messages in mu databases.
DESCRIPTION
The mu query language is a language used by mu find and mu4e to find messages in mu's Xapian databases.
The language is quite similar to Xapian's default query-parser, but is an independent implementation that
is customized for the mu/mu4e use-case.
In this article, we give a structured but informal overview of the query language and provide examples.
As a companion to this, we recommend the mu fields and mu flags commands to get an up-to-date list of the
available fields and flags.
NOTE: if you use queries on the command-line (say, for mu find), you need to quote any characters that
would otherwise be interpreted by the shell, such as "", ( and ) and whitespace.
TERMS
The basic building blocks of a query are terms; these are just normal words like 'banana' or 'hello', or
words prefixed with a field-name which make them apply to just that field. See mu find for all the
available fields.
Some example queries:
vacation
subject:capybara
maildir:/inbox
Terms without an explicit field-prefix, (like 'vacation' above) are interpreted like:
to:vacation or subject:vacation or body:vacation or ...
The language is case-insensitive for terms and attempts to 'flatten' any diacritics, so angtrom matches
Ångström.
If terms contain whitespace, they need to be quoted:
subject:"hi there"
This is a so-called phrase query, which means that we match against subjects that contain the literal
phrase "hi there".
Remember that you need to escape those quotes when using this from the command-line:
mu find subject:\"hi there\"
LOGICAL OPERATORS
We can combine terms with logical operators -- binary ones: and, or, xor and the unary not, with the
conventional rules for precedence and association, and are case-insensitive.
You can also group things with ( and ), so you can do things like:
(subject:beethoven or subject:bach) and not body:elvis
If you do not explicitly specify an operator between terms, and is implied, so the queries
subject:chip subject:dale
subject:chip AND subject:dale
are equivalent. For readability, we recommend the second version.
Note that a pure not - e.g. searching for not apples is quite a 'heavy' query.
REGULAR EXPRESSIONS AND WILDCARDS
The language supports matching basic PCRE regular expressions, see pcre(3).
Regular expressions are enclosed in //. Some examples:
subject:/h.llo/ # match hallo, hello, ...
subject:/
Note the difference between 'maildir:/foo' and 'maildir:/foo/'; the former matches messages in the '/foo'
maildir, while the latter matches all messages in all maildirs that match 'foo', such as '/foo',
'/bar/cuux/foo', '/fooishbar' etc.
Wildcards are an older mechanism for matching where a term with a rightmost * (and only in that position)
matches any term that starts with the part before the *; they are supported for backward compatibility
and mu translates them to regular expressions internally:
foo*
is equivalent to
/foo.*/
As a note of caution, certain wild-cards and regular expression can take quite a bit longer than 'normal'
queries.
FIELDS
We already saw a number of search fields, such as subject: and body:. For the full table, see mu-
fields(1).
bcc,h Bcc (blind-carbon-copy) recipient(s)
body,b Message body
cc,c Cc (carbon-copy) recipient(s)
changed,k Last change to message file (range)
date,d Send date (range)
embed,e Search inside embedded text parts
file,j Attachment filename
flag,g Message Flags
from,f Message sender
list,v Mailing list (e.g. the List-Id value)
maildir,m Maildir
mime,y MIME-type of one or more message parts
msgid,i Message-ID
prio,p Message priority (=low=, =normal= or =high=)
size,z Message size range
subject,s Message subject
tag,x Tags for the message
thread,w Thread a message belongs to
to,t To: recipient(s)
The shortcut character can be used instead of the full name:
f:foo@bar
is the same as
from:foo@bar
For queries that are not one-off, we would recommend the longer name for readability.
There are also the special fields contact:, which matches all contact-fields (from, to, cc and bcc), and
recip, which matches all recipient-fields (to, cc and bcc). Hence, for instance,
contact:fnorb@example.com
is equivalent to
(from:fnorb@example.com or to:fnorb@example.com or
cc:from:fnorb@example.com or bcc:fnorb@example.com)
DATE RANGES
The date: field takes a date-range, expressed as the lower and upper bound, separated by ... Either lower
or upper (but not both) can be omitted to create an open range.
Dates are expressed in local time and using ISO-8601 format (YYYY-MM-DD HH:MM:SS); you can leave out the
right part, and mu adds the rest, depending on whether this is the beginning or end of the range (e.g.,
as a lower bound, '2015' would be interpreted as the start of that year; as an upper bound as the end of
the year).
You can use '/' , '.', '-' and 'T' to make dates more human readable.
Some examples:
date:20170505..20170602
date:2017-05-05..2017-06-02
date:..2017-10-01T12:00
date:2015-06-01..
date:2016..2016
You can also use the special 'dates' now and today:
date:20170505..now
date:today..
Finally, you can use relative 'ago' times which express some time before now and consist of a number
followed by a unit, with units s for seconds, M for minutes, h for hours, d for days, w for week, m for
months and y for years. Some examples:
date:3m..
date:2017.01.01..5w
SIZE RANGES
The size or z field allows you to match size ranges -- that is, match messages that have a byte-size
within a certain range. Units (b (for bytes), K (for 1000 bytes) and M (for 1000 * 1000 bytes) are
supported). Some examples:
size:10k..2m
size:10m..
FLAG FIELD
The flag/g field allows you to match message flags. The following fields are available:
a,attach Message with attachment
d,draft Draft Message
f,flagged Flagged
l,list Mailing-list message
n,new New message (in new/ Maildir)
p,passed Passed ('Handled')
r,replied Replied
s,seen Seen
t,trashed Marked for deletion
u,unread new OR NOT seen
x,encrypted Encrypted message
z,signed Signed message
Some examples:
flag:attach
flag:replied
g:x
Encrypted messages may be signed as well, but this is only visible after decrypting and thus invisible to
mu.
PRIORITY FIELD
The message priority field (prio:) has three possible values: low, normal or high. For instance, to match
high-priority messages:
prio:high
MAILDIR
The Maildir field describes the directory path starting after the Maildir-base path, and before the /cur/
or /new/ part. So for example, if there's a message with the file name
~/Maildir/lists/running/cur/1234.213:2,, you could find it (and all the other messages in the same
maildir) with:
maildir:/lists/running
Note the starting ''. If you want to match mails in the 'root' maildir, you can do with a single '':
maildir:/
If you have maildirs (or any fields) that include spaces, you need to quote them, ie.
maildir:"/Sent Items"
Note that from the command-line, such queries must be quoted:
mu find 'maildir:"/Sent Items"'
MORE EXAMPLES
Here are some simple examples of mu queries; you can make many more complicated queries using various
logical operators, parentheses and so on, but in the author's experience, it's usually faster to find a
message with a simple query just searching for some words.
Find all messages with both 'bee' and 'bird' (in any field)
bee AND bird
Find all messages with either Frodo or Sam:
Frodo OR Sam
Find all messages with the 'wombat' as subject, and 'capybara' anywhere:
subject:wombat and capybara
Find all messages in the 'Archive' folder from Fred:
from:fred and maildir:/Archive
Find all unread messages with attachments:
flag:attach and flag:unread
Find all messages with PDF-attachments:
mime:application/pdf
Find all messages with attached images:
mime:image/*
CAVEATS
With current Xapian versions, the apostroph character is considered part of a word. Thus, you cannot find
D'Artagnan by searching for Artagnan. So, include the apostroph in search or use a regexp search.
Matching on spaces has changed compared to the old query-parser; this applies e.g. to Maildirs that have
spaces in their name, such as Sent Items. See MAILDIR above.
REPORTING BUGS
Please report bugs at https://github.com/djcb/mu/issues.
AUTHOR
Dirk-Jan C. Binnema <djcb@djcbsoftware.nl>
COPYRIGHT
This manpage is part of mu 1.10.8.
Copyright © 2022-2023 Dirk-Jan C. Binnema. License GPLv3+: GNU GPL version 3 or later
https://gnu.org/licenses/gpl.html. This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
SEE ALSO
mu-find(1), mu-fields(1), *pcre(3)
MU QUERY(7)