Provided by: cmake-data_3.28.3-1build7_all 
NAME
cmake-packages - CMake Packages Reference
INTRODUCTION
Packages provide dependency information to CMake based buildsystems. Packages are found with the
find_package() command. The result of using find_package() is either a set of IMPORTED targets, or a set
of variables corresponding to build-relevant information.
USING PACKAGES
CMake provides direct support for two forms of packages, Config-file Packages and Find-module Packages.
Indirect support for pkg-config packages is also provided via the FindPkgConfig module. In all cases,
the basic form of find_package() calls is the same:
find_package(Qt4 4.7.0 REQUIRED) # CMake provides a Qt4 find-module
find_package(Qt5Core 5.1.0 REQUIRED) # Qt provides a Qt5 package config file.
find_package(LibXml2 REQUIRED) # Use pkg-config via the LibXml2 find-module
In cases where it is known that a package configuration file is provided by upstream, and only that
should be used, the CONFIG keyword may be passed to find_package():
find_package(Qt5Core 5.1.0 CONFIG REQUIRED)
find_package(Qt5Gui 5.1.0 CONFIG)
Similarly, the MODULE keyword says to use only a find-module:
find_package(Qt4 4.7.0 MODULE REQUIRED)
Specifying the type of package explicitly improves the error message shown to the user if it is not
found.
Both types of packages also support specifying components of a package, either after the REQUIRED
keyword:
find_package(Qt5 5.1.0 CONFIG REQUIRED Widgets Xml Sql)
or as a separate COMPONENTS list:
find_package(Qt5 5.1.0 COMPONENTS Widgets Xml Sql)
or as a separate OPTIONAL_COMPONENTS list:
find_package(Qt5 5.1.0 COMPONENTS Widgets
OPTIONAL_COMPONENTS Xml Sql
)
Handling of COMPONENTS and OPTIONAL_COMPONENTS is defined by the package.
By setting the CMAKE_DISABLE_FIND_PACKAGE_<PackageName> variable to TRUE, the <PackageName> package will
not be searched, and will always be NOTFOUND. Likewise, setting the
CMAKE_REQUIRE_FIND_PACKAGE_<PackageName> to TRUE will make the package REQUIRED.
Config-file Packages
A config-file package is a set of files provided by upstreams for downstreams to use. CMake searches in a
number of locations for package configuration files, as described in the find_package() documentation.
The most simple way for a CMake user to tell cmake(1) to search in a non-standard prefix for a package is
to set the CMAKE_PREFIX_PATH cache variable.
Config-file packages are provided by upstream vendors as part of development packages, that is, they
belong with the header files and any other files provided to assist downstreams in using the package.
A set of variables which provide package status information are also set automatically when using a
config-file package. The <PackageName>_FOUND variable is set to true or false, depending on whether the
package was found. The <PackageName>_DIR cache variable is set to the location of the package
configuration file.
Find-module Packages
A find module is a file with a set of rules for finding the required pieces of a dependency, primarily
header files and libraries. Typically, a find module is needed when the upstream is not built with
CMake, or is not CMake-aware enough to otherwise provide a package configuration file. Unlike a package
configuration file, it is not shipped with upstream, but is used by downstream to find the files by
guessing locations of files with platform-specific hints.
Unlike the case of an upstream-provided package configuration file, no single point of reference
identifies the package as being found, so the <PackageName>_FOUND variable is not automatically set by
the find_package() command. It can still be expected to be set by convention however and should be set
by the author of the Find-module. Similarly there is no <PackageName>_DIR variable, but each of the
artifacts such as library locations and header file locations provide a separate cache variable.
See the cmake-developer(7) manual for more information about creating Find-module files.
PACKAGE LAYOUT
A config-file package consists of a Package Configuration File and optionally a Package Version File
provided with the project distribution.
Package Configuration File
Consider a project Foo that installs the following files:
<prefix>/include/foo-1.2/foo.h
<prefix>/lib/foo-1.2/libfoo.a
It may also provide a CMake package configuration file:
<prefix>/lib/cmake/foo-1.2/FooConfig.cmake
with content defining IMPORTED targets, or defining variables, such as:
# ...
# (compute PREFIX relative to file location)
# ...
set(Foo_INCLUDE_DIRS ${PREFIX}/include/foo-1.2)
set(Foo_LIBRARIES ${PREFIX}/lib/foo-1.2/libfoo.a)
If another project wishes to use Foo it need only to locate the FooConfig.cmake file and load it to get
all the information it needs about package content locations. Since the package configuration file is
provided by the package installation it already knows all the file locations.
The find_package() command may be used to search for the package configuration file. This command
constructs a set of installation prefixes and searches under each prefix in several locations. Given the
name Foo, it looks for a file called FooConfig.cmake or foo-config.cmake. The full set of locations is
specified in the find_package() command documentation. One place it looks is:
<prefix>/lib/cmake/Foo*/
where Foo* is a case-insensitive globbing expression. In our example the globbing expression will match
<prefix>/lib/cmake/foo-1.2 and the package configuration file will be found.
Once found, a package configuration file is immediately loaded. It, together with a package version
file, contains all the information the project needs to use the package.
Package Version File
When the find_package() command finds a candidate package configuration file it looks next to it for a
version file. The version file is loaded to test whether the package version is an acceptable match for
the version requested. If the version file claims compatibility the configuration file is accepted.
Otherwise it is ignored.
The name of the package version file must match that of the package configuration file but has either
-version or Version appended to the name before the .cmake extension. For example, the files:
<prefix>/lib/cmake/foo-1.3/foo-config.cmake
<prefix>/lib/cmake/foo-1.3/foo-config-version.cmake
and:
<prefix>/lib/cmake/bar-4.2/BarConfig.cmake
<prefix>/lib/cmake/bar-4.2/BarConfigVersion.cmake
are each pairs of package configuration files and corresponding package version files.
When the find_package() command loads a version file it first sets the following variables:
PACKAGE_FIND_NAME
The <PackageName>
PACKAGE_FIND_VERSION
Full requested version string
PACKAGE_FIND_VERSION_MAJOR
Major version if requested, else 0
PACKAGE_FIND_VERSION_MINOR
Minor version if requested, else 0
PACKAGE_FIND_VERSION_PATCH
Patch version if requested, else 0
PACKAGE_FIND_VERSION_TWEAK
Tweak version if requested, else 0
PACKAGE_FIND_VERSION_COUNT
Number of version components, 0 to 4
The version file must use these variables to check whether it is compatible or an exact match for the
requested version and set the following variables with results:
PACKAGE_VERSION
Full provided version string
PACKAGE_VERSION_EXACT
True if version is exact match
PACKAGE_VERSION_COMPATIBLE
True if version is compatible
PACKAGE_VERSION_UNSUITABLE
True if unsuitable as any version
Version files are loaded in a nested scope so they are free to set any variables they wish as part of
their computation. The find_package command wipes out the scope when the version file has completed and
it has checked the output variables. When the version file claims to be an acceptable match for the
requested version the find_package command sets the following variables for use by the project:
<PackageName>_VERSION
Full provided version string
<PackageName>_VERSION_MAJOR
Major version if provided, else 0
<PackageName>_VERSION_MINOR
Minor version if provided, else 0
<PackageName>_VERSION_PATCH
Patch version if provided, else 0
<PackageName>_VERSION_TWEAK
Tweak version if provided, else 0
<PackageName>_VERSION_COUNT
Number of version components, 0 to 4
The variables report the version of the package that was actually found. The <PackageName> part of their
name matches the argument given to the find_package() command.
CREATING PACKAGES
Usually, the upstream depends on CMake itself and can use some CMake facilities for creating the package
files. Consider an upstream which provides a single shared library:
project(UpstreamLib)
set(CMAKE_INCLUDE_CURRENT_DIR ON)
set(CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE ON)
set(Upstream_VERSION 3.4.1)
include(GenerateExportHeader)
add_library(ClimbingStats SHARED climbingstats.cpp)
generate_export_header(ClimbingStats)
set_property(TARGET ClimbingStats PROPERTY VERSION ${Upstream_VERSION})
set_property(TARGET ClimbingStats PROPERTY SOVERSION 3)
set_property(TARGET ClimbingStats PROPERTY
INTERFACE_ClimbingStats_MAJOR_VERSION 3)
set_property(TARGET ClimbingStats APPEND PROPERTY
COMPATIBLE_INTERFACE_STRING ClimbingStats_MAJOR_VERSION
)
install(TARGETS ClimbingStats EXPORT ClimbingStatsTargets
LIBRARY DESTINATION lib
ARCHIVE DESTINATION lib
RUNTIME DESTINATION bin
INCLUDES DESTINATION include
)
install(
FILES
climbingstats.h
"${CMAKE_CURRENT_BINARY_DIR}/climbingstats_export.h"
DESTINATION
include
COMPONENT
Devel
)
include(CMakePackageConfigHelpers)
write_basic_package_version_file(
"${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfigVersion.cmake"
VERSION ${Upstream_VERSION}
COMPATIBILITY AnyNewerVersion
)
export(EXPORT ClimbingStatsTargets
FILE "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsTargets.cmake"
NAMESPACE Upstream::
)
configure_file(cmake/ClimbingStatsConfig.cmake
"${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfig.cmake"
COPYONLY
)
set(ConfigPackageLocation lib/cmake/ClimbingStats)
install(EXPORT ClimbingStatsTargets
FILE
ClimbingStatsTargets.cmake
NAMESPACE
Upstream::
DESTINATION
${ConfigPackageLocation}
)
install(
FILES
cmake/ClimbingStatsConfig.cmake
"${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfigVersion.cmake"
DESTINATION
${ConfigPackageLocation}
COMPONENT
Devel
)
The CMakePackageConfigHelpers module provides a macro for creating a simple ConfigVersion.cmake file.
This file sets the version of the package. It is read by CMake when find_package() is called to
determine the compatibility with the requested version, and to set some version-specific variables
<PackageName>_VERSION, <PackageName>_VERSION_MAJOR, <PackageName>_VERSION_MINOR etc. The install(EXPORT)
command is used to export the targets in the ClimbingStatsTargets export-set, defined previously by the
install(TARGETS) command. This command generates the ClimbingStatsTargets.cmake file to contain IMPORTED
targets, suitable for use by downstreams and arranges to install it to lib/cmake/ClimbingStats. The
generated ClimbingStatsConfigVersion.cmake and a cmake/ClimbingStatsConfig.cmake are installed to the
same location, completing the package.
The generated IMPORTED targets have appropriate properties set to define their usage requirements, such
as INTERFACE_INCLUDE_DIRECTORIES, INTERFACE_COMPILE_DEFINITIONS and other relevant built-in INTERFACE_
properties. The INTERFACE variant of user-defined properties listed in COMPATIBLE_INTERFACE_STRING and
other Compatible Interface Properties are also propagated to the generated IMPORTED targets. In the
above case, ClimbingStats_MAJOR_VERSION is defined as a string which must be compatible among the
dependencies of any depender. By setting this custom defined user property in this version and in the
next version of ClimbingStats, cmake(1) will issue a diagnostic if there is an attempt to use version 3
together with version 4. Packages can choose to employ such a pattern if different major versions of the
package are designed to be incompatible.
A NAMESPACE with double-colons is specified when exporting the targets for installation. This convention
of double-colons gives CMake a hint that the name is an IMPORTED target when it is used by downstreams
with the target_link_libraries() command. This way, CMake can issue a diagnostic if the package
providing it has not yet been found.
In this case, when using install(TARGETS) the INCLUDES DESTINATION was specified. This causes the
IMPORTED targets to have their INTERFACE_INCLUDE_DIRECTORIES populated with the include directory in the
CMAKE_INSTALL_PREFIX. When the IMPORTED target is used by downstream, it automatically consumes the
entries from that property.
Creating a Package Configuration File
In this case, the ClimbingStatsConfig.cmake file could be as simple as:
include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
As this allows downstreams to use the IMPORTED targets. If any macros should be provided by the
ClimbingStats package, they should be in a separate file which is installed to the same location as the
ClimbingStatsConfig.cmake file, and included from there.
This can also be extended to cover dependencies:
# ...
add_library(ClimbingStats SHARED climbingstats.cpp)
generate_export_header(ClimbingStats)
find_package(Stats 2.6.4 REQUIRED)
target_link_libraries(ClimbingStats PUBLIC Stats::Types)
As the Stats::Types target is a PUBLIC dependency of ClimbingStats, downstreams must also find the Stats
package and link to the Stats::Types library. The Stats package should be found in the
ClimbingStatsConfig.cmake file to ensure this. The find_dependency macro from the
CMakeFindDependencyMacro helps with this by propagating whether the package is REQUIRED, or QUIET etc.
All REQUIRED dependencies of a package should be found in the Config.cmake file:
include(CMakeFindDependencyMacro)
find_dependency(Stats 2.6.4)
include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsMacros.cmake")
The find_dependency macro also sets ClimbingStats_FOUND to False if the dependency is not found, along
with a diagnostic that the ClimbingStats package can not be used without the Stats package.
If COMPONENTS are specified when the downstream uses find_package(), they are listed in the
<PackageName>_FIND_COMPONENTS variable. If a particular component is non-optional, then the
<PackageName>_FIND_REQUIRED_<comp> will be true. This can be tested with logic in the package
configuration file:
include(CMakeFindDependencyMacro)
find_dependency(Stats 2.6.4)
include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsMacros.cmake")
set(_ClimbingStats_supported_components Plot Table)
foreach(_comp ${ClimbingStats_FIND_COMPONENTS})
if (NOT ";${_ClimbingStats_supported_components};" MATCHES ";${_comp};")
set(ClimbingStats_FOUND False)
set(ClimbingStats_NOT_FOUND_MESSAGE "Unsupported component: ${_comp}")
endif()
include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStats${_comp}Targets.cmake")
endforeach()
Here, the ClimbingStats_NOT_FOUND_MESSAGE is set to a diagnosis that the package could not be found
because an invalid component was specified. This message variable can be set for any case where the
_FOUND variable is set to False, and will be displayed to the user.
Creating a Package Configuration File for the Build Tree
The export(EXPORT) command creates an IMPORTED targets definition file which is specific to the
build-tree, and is not relocatable. This can similarly be used with a suitable package configuration
file and package version file to define a package for the build tree which may be used without
installation. Consumers of the build tree can simply ensure that the CMAKE_PREFIX_PATH contains the
build directory, or set the ClimbingStats_DIR to <build_dir>/ClimbingStats in the cache.
Creating Relocatable Packages
A relocatable package must not reference absolute paths of files on the machine where the package is
built that will not exist on the machines where the package may be installed.
Packages created by install(EXPORT) are designed to be relocatable, using paths relative to the location
of the package itself. When defining the interface of a target for EXPORT, keep in mind that the include
directories should be specified as relative paths which are relative to the CMAKE_INSTALL_PREFIX:
target_include_directories(tgt INTERFACE
# Wrong, not relocatable:
$<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include/TgtName>
)
target_include_directories(tgt INTERFACE
# Ok, relocatable:
$<INSTALL_INTERFACE:include/TgtName>
)
The $<INSTALL_PREFIX> generator expression may be used as a placeholder for the install prefix without
resulting in a non-relocatable package. This is necessary if complex generator expressions are used:
target_include_directories(tgt INTERFACE
# Ok, relocatable:
$<INSTALL_INTERFACE:$<$<CONFIG:Debug>:$<INSTALL_PREFIX>/include/TgtName>>
)
This also applies to paths referencing external dependencies. It is not advisable to populate any
properties which may contain paths, such as INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_LINK_LIBRARIES,
with paths relevant to dependencies. For example, this code may not work well for a relocatable package:
target_link_libraries(ClimbingStats INTERFACE
${Foo_LIBRARIES} ${Bar_LIBRARIES}
)
target_include_directories(ClimbingStats INTERFACE
"$<INSTALL_INTERFACE:${Foo_INCLUDE_DIRS};${Bar_INCLUDE_DIRS}>"
)
The referenced variables may contain the absolute paths to libraries and include directories as found on
the machine the package was made on. This would create a package with hard-coded paths to dependencies
and not suitable for relocation.
Ideally such dependencies should be used through their own IMPORTED targets that have their own
IMPORTED_LOCATION and usage requirement properties such as INTERFACE_INCLUDE_DIRECTORIES populated
appropriately. Those imported targets may then be used with the target_link_libraries() command for
ClimbingStats:
target_link_libraries(ClimbingStats INTERFACE Foo::Foo Bar::Bar)
With this approach the package references its external dependencies only through the names of IMPORTED
targets. When a consumer uses the installed package, the consumer will run the appropriate
find_package() commands (via the find_dependency macro described above) to find the dependencies and
populate the imported targets with appropriate paths on their own machine.
Unfortunately many modules shipped with CMake do not yet provide IMPORTED targets because their
development pre-dated this approach. This may improve incrementally over time. Workarounds to create
relocatable packages using such modules include:
• When building the package, specify each Foo_LIBRARY cache entry as just a library name, e.g.
-DFoo_LIBRARY=foo. This tells the corresponding find module to populate the Foo_LIBRARIES with just
foo to ask the linker to search for the library instead of hard-coding a path.
• Or, after installing the package content but before creating the package installation binary for
redistribution, manually replace the absolute paths with placeholders for substitution by the
installation tool when the package is installed.
PACKAGE REGISTRY
CMake provides two central locations to register packages that have been built or installed anywhere on a
system:
• User Package Registry
• System Package Registry
The registries are especially useful to help projects find packages in non-standard install locations or
directly in their own build trees. A project may populate either the user or system registry (using its
own means, see below) to refer to its location. In either case the package should store at the
registered location a Package Configuration File (<PackageName>Config.cmake) and optionally a Package
Version File (<PackageName>ConfigVersion.cmake).
The find_package() command searches the two package registries as two of the search steps specified in
its documentation. If it has sufficient permissions it also removes stale package registry entries that
refer to directories that do not exist or do not contain a matching package configuration file.
User Package Registry
The User Package Registry is stored in a per-user location. The export(PACKAGE) command may be used to
register a project build tree in the user package registry. CMake currently provides no interface to add
install trees to the user package registry. Installers must be manually taught to register their
packages if desired.
On Windows the user package registry is stored in the Windows registry under a key in HKEY_CURRENT_USER.
A <PackageName> may appear under registry key:
HKEY_CURRENT_USER\Software\Kitware\CMake\Packages\<PackageName>
as a REG_SZ value, with arbitrary name, that specifies the directory containing the package configuration
file.
On UNIX platforms the user package registry is stored in the user home directory under ~/.cmake/packages.
A <PackageName> may appear under the directory:
~/.cmake/packages/<PackageName>
as a file, with arbitrary name, whose content specifies the directory containing the package
configuration file.
System Package Registry
The System Package Registry is stored in a system-wide location. CMake currently provides no interface
to add to the system package registry. Installers must be manually taught to register their packages if
desired.
On Windows the system package registry is stored in the Windows registry under a key in
HKEY_LOCAL_MACHINE. A <PackageName> may appear under registry key:
HKEY_LOCAL_MACHINE\Software\Kitware\CMake\Packages\<PackageName>
as a REG_SZ value, with arbitrary name, that specifies the directory containing the package configuration
file.
There is no system package registry on non-Windows platforms.
Disabling the Package Registry
In some cases using the Package Registries is not desirable. CMake allows one to disable them using the
following variables:
• The export(PACKAGE) command does not populate the user package registry when CMP0090 is set to NEW
unless the CMAKE_EXPORT_PACKAGE_REGISTRY variable explicitly enables it. When CMP0090 is not set to
NEW then export(PACKAGE) populates the user package registry unless the
CMAKE_EXPORT_NO_PACKAGE_REGISTRY variable explicitly disables it.
• CMAKE_FIND_USE_PACKAGE_REGISTRY disables the User Package Registry in all the find_package() calls when
set to FALSE.
• Deprecated CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY disables the User Package Registry in all the
find_package() calls when set to TRUE. This variable is ignored when CMAKE_FIND_USE_PACKAGE_REGISTRY
has been set.
• CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY disables the System Package Registry in all the
find_package() calls.
Package Registry Example
A simple convention for naming package registry entries is to use content hashes. They are deterministic
and unlikely to collide (export(PACKAGE) uses this approach). The name of an entry referencing a
specific directory is simply the content hash of the directory path itself.
If a project arranges for package registry entries to exist, such as:
> reg query HKCU\Software\Kitware\CMake\Packages\MyPackage
HKEY_CURRENT_USER\Software\Kitware\CMake\Packages\MyPackage
45e7d55f13b87179bb12f907c8de6fc4 REG_SZ c:/Users/Me/Work/lib/cmake/MyPackage
7b4a9844f681c80ce93190d4e3185db9 REG_SZ c:/Users/Me/Work/MyPackage-build
or:
$ cat ~/.cmake/packages/MyPackage/7d1fb77e07ce59a81bed093bbee945bd
/home/me/work/lib/cmake/MyPackage
$ cat ~/.cmake/packages/MyPackage/f92c1db873a1937f3100706657c63e07
/home/me/work/MyPackage-build
then the CMakeLists.txt code:
find_package(MyPackage)
will search the registered locations for package configuration files (MyPackageConfig.cmake). The search
order among package registry entries for a single package is unspecified and the entry names (hashes in
this example) have no meaning. Registered locations may contain package version files
(MyPackageConfigVersion.cmake) to tell find_package() whether a specific location is suitable for the
version requested.
Package Registry Ownership
Package registry entries are individually owned by the project installations that they reference. A
package installer is responsible for adding its own entry and the corresponding uninstaller is
responsible for removing it.
The export(PACKAGE) command populates the user package registry with the location of a project build
tree. Build trees tend to be deleted by developers and have no "uninstall" event that could trigger
removal of their entries. In order to keep the registries clean the find_package() command automatically
removes stale entries it encounters if it has sufficient permissions. CMake provides no interface to
remove an entry referencing an existing build tree once export(PACKAGE) has been invoked. However, if
the project removes its package configuration file from the build tree then the entry referencing the
location will be considered stale.
COPYRIGHT
2000-2024 Kitware, Inc. and Contributors
3.28.3 April 15, 2024 CMAKE-PACKAGES(7)