Provided by: slapd_2.6.7+dfsg-1~exp1ubuntu8.2_amd64 
NAME
slapo-accesslog - Access Logging overlay to slapd
SYNOPSIS
/etc/ldap/slapd.conf
DESCRIPTION
The Access Logging overlay can be used to record all accesses to a given backend database on another
database. This allows all of the activity on a given database to be reviewed using arbitrary LDAP
queries, instead of just logging to local flat text files. Configuration options are available for
selecting a subset of operation types to log, and to automatically prune older log records from the
logging database. Log records are stored with audit schema (see below) to assure their readability
whether viewed as LDIF or in raw form.
CONFIGURATION
These slapd.conf options apply to the Access Logging overlay. They should appear after the overlay
directive.
logdb <suffix>
Specify the suffix of a database to be used for storing the log records. The specified database
must be defined elsewhere in the configuration and must support an ordered return of results such
as slapd-mdb(5) The access controls on the log database should prevent general access. The suffix
entry of the log database will be created automatically by this overlay. The log entries will be
generated as the immediate children of the suffix entry.
logops <operations>
Specify which types of operations to log. The valid operation types are abandon, add, bind,
compare, delete, extended, modify, modrdn, search, and unbind. Aliases for common sets of
operations are also available:
writes add, delete, modify, modrdn
reads compare, search
session
abandon, bind, unbind
all all operations
logbase <operations> <baseDN>
Specify a set of operations that will only be logged if they occur under a specific subtree of the
database. The operation types are as above for the logops setting, and delimited by a '|'
character.
logold <filter>
Specify a filter for matching against Deleted and Modified entries. If the entry matches the
filter, the old contents of the entry will be logged along with the current request.
logoldattr <attr> ...
Specify a list of attributes whose old contents are always logged in Modify and ModRDN requests
that match any of the filters configured in logold. Usually only the contents of attributes that
were actually modified will be logged; by default no old attributes are logged for ModRDN
requests.
logpurge <age> <interval>
Specify the maximum age for log entries to be retained in the database, and how often to scan the
database for old entries. Both the age and interval are specified as a time span in days, hours,
minutes, and seconds. The time format is [ddd+]hh:mm[:ss] i.e., the days and seconds components
are optional but hours and minutes are required. Except for days, which can be up to 5 digits,
each numeric field must be exactly two digits. For example
logpurge 2+00:00 1+00:00
would specify that the log database should be scanned every day for old entries, and entries older
than two days should be deleted. When using a log database that supports ordered indexing on
generalizedTime attributes, specifying an eq index on the reqStart attribute will greatly benefit
the performance of the purge operation.
logsuccess TRUE | FALSE
If set to TRUE then log records will only be generated for successful requests, i.e., requests
that produce a result code of 0 (LDAP_SUCCESS). If FALSE, log records are generated for all
requests whether they succeed or not. The default is FALSE.
EXAMPLES
database mdb
suffix dc=example,dc=com
...
overlay accesslog
logdb cn=log
logops writes reads
logbase search|compare ou=testing,dc=example,dc=com
logold (objectclass=person)
database mdb
suffix cn=log
...
index reqStart eq
access to *
by dn.base="cn=admin,dc=example,dc=com" read
SCHEMA
The accesslog overlay utilizes the "audit" schema described herein. This schema is specifically designed
for accesslog auditing and is not intended to be used otherwise. It is also noted that the schema
described here is a work in progress, and hence subject to change without notice. The schema is loaded
automatically by the overlay.
The schema includes a number of object classes and associated attribute types as described below.
The root entry of the underlying accesslog database makes use of the auditContainer class which is as
follows:
( 1.3.6.1.4.1.4203.666.11.5.2.0
NAME 'auditContainer'
DESC 'AuditLog container'
SUP top STRUCTURAL
MAY ( cn $ reqStart $ reqEnd ) )
There is a basic auditObject class from which two additional classes, auditReadObject and
auditWriteObject are derived. Object classes for each type of LDAP operation are further derived from
these classes. This object class hierarchy is designed to allow flexible yet efficient searches of the
log based on either a specific operation type's class, or on more general classifications. The definition
of the auditObject class is as follows:
( 1.3.6.1.4.1.4203.666.11.5.2.1
NAME 'auditObject'
DESC 'OpenLDAP request auditing'
SUP top STRUCTURAL
MUST ( reqStart $ reqType $ reqSession )
MAY ( reqDN $ reqAuthzID $ reqControls $ reqRespControls $
reqEnd $ reqResult $ reqMessage $ reqReferral $ reqEntryUUID ) )
Note that all of the OIDs used in the logging schema currently reside under the OpenLDAP Experimental
branch. It is anticipated that they will migrate to a Standard branch in the future.
An overview of the attributes follows: reqStart and reqEnd provide the start and end time of the
operation, respectively. They use generalizedTime syntax. The reqStart attribute is also used as the RDN
for each log entry.
The reqType attribute is a simple string containing the type of operation being logged, e.g. add,
delete, search, etc. For extended operations, the type also includes the OID of the extended operation,
e.g. extended(1.1.1.1)
The reqSession attribute is an implementation-specific identifier that is common to all the operations
associated with the same LDAP session. Currently this is slapd's internal connection ID, stored in
decimal.
The reqDN attribute is the distinguishedName of the target of the operation. E.g., for a Bind request,
this is the Bind DN. For an Add request, this is the DN of the entry being added. For a Search request,
this is the base DN of the search.
The reqAuthzID attribute is the distinguishedName of the user that performed the operation. This will
usually be the same name as was established at the start of a session by a Bind request (if any) but may
be altered in various circumstances.
The reqControls and reqRespControls attributes carry any controls sent by the client on the request and
returned by the server in the response, respectively. The attribute values are just uninterpreted octet
strings.
The reqResult attribute is the numeric LDAP result code of the operation, indicating either success or a
particular LDAP error code. An error code may be accompanied by a text error message which will be
recorded in the reqMessage attribute.
The reqReferral attribute carries any referrals that were returned with the result of the request.
The reqEntryUUID attribute records the entryUUID attribute of the entry operated on, for an Add request,
this is the entryUUID of the newly created entry.
Operation-specific classes are defined with additional attributes to carry all of the relevant parameters
associated with the operation:
( 1.3.6.1.4.1.4203.666.11.5.2.4
NAME 'auditAbandon'
DESC 'Abandon operation'
SUP auditObject STRUCTURAL
MUST reqId )
For the Abandon operation the reqId attribute contains the message ID of the request that was abandoned.
( 1.3.6.1.4.1.4203.666.11.5.2.5
NAME 'auditAdd'
DESC 'Add operation'
SUP auditWriteObject STRUCTURAL
MUST reqMod )
The Add class inherits from the auditWriteObject class. The Add and Modify classes are very similar. The
reqMod attribute carries all of the attributes of the original entry being added. (Or in the case of a
Modify operation, all of the modifications being performed.) The values are formatted as
attribute:<+|-|=|#> [ value]
Where '+' indicates an Add of a value, '-' for Delete, '=' for Replace, and '#' for Increment. In an Add
operation, all of the reqMod values will have the '+' designator.
( 1.3.6.1.4.1.4203.666.11.5.2.6
NAME 'auditBind'
DESC 'Bind operation'
SUP auditObject STRUCTURAL
MUST ( reqVersion $ reqMethod ) )
The Bind class includes the reqVersion attribute which contains the LDAP protocol version specified in
the Bind as well as the reqMethod attribute which contains the Bind Method used in the Bind. This will be
the string SIMPLE for LDAP Simple Binds or SASL(<mech>) for SASL Binds. Note that unless configured as a
global overlay, only Simple Binds using DNs that reside in the current database will be logged.
( 1.3.6.1.4.1.4203.666.11.5.2.7
NAME 'auditCompare'
DESC 'Compare operation'
SUP auditObject STRUCTURAL
MUST reqAssertion )
For the Compare operation the reqAssertion attribute carries the Attribute Value Assertion used in the
compare request.
( 1.3.6.1.4.1.4203.666.11.5.2.8
NAME 'auditDelete'
DESC 'Delete operation'
SUP auditWriteObject STRUCTURAL
MAY reqOld )
The Delete operation needs no further parameters. However, the reqOld attribute may optionally be used to
record the contents of the entry prior to its deletion. The values are formatted as
attribute: value
The reqOld attribute is only populated if the entry being deleted matches the configured logold filter.
( 1.3.6.1.4.1.4203.666.11.5.2.9
NAME 'auditModify'
DESC 'Modify operation'
SUP auditWriteObject STRUCTURAL
MAY ( reqOld $ reqMod ) )
The Modify operation contains a description of modifications in the reqMod attribute, which was already
described above in the Add operation. It may optionally contain the previous contents of any modified
attributes in the reqOld attribute, using the same format as described above for the Delete operation.
The reqOld attribute is only populated if the entry being modified matches the configured logold filter.
( 1.3.6.1.4.1.4203.666.11.5.2.10
NAME 'auditModRDN'
DESC 'ModRDN operation'
SUP auditWriteObject STRUCTURAL
MUST ( reqNewRDN $ reqDeleteOldRDN )
MAY ( reqNewSuperior $ reqMod $ reqOld ) )
The ModRDN class uses the reqNewRDN attribute to carry the new RDN of the request. The reqDeleteOldRDN
attribute is a Boolean value showing TRUE if the old RDN was deleted from the entry, or FALSE if the old
RDN was preserved. The reqNewSuperior attribute carries the DN of the new parent entry if the request
specified the new parent. The reqOld attribute is only populated if the entry being modified matches the
configured logold filter and contains attributes in the logoldattr list.
( 1.3.6.1.4.1.4203.666.11.5.2.11
NAME 'auditSearch'
DESC 'Search operation'
SUP auditReadObject STRUCTURAL
MUST ( reqScope $ reqDerefAliases $ reqAttrsOnly )
MAY ( reqFilter $ reqAttr $ reqEntries $ reqSizeLimit $
reqTimeLimit ) )
For the Search class the reqScope attribute contains the scope of the original search request, using the
values specified for the LDAP URL format. I.e. base, one, sub, or subord. The reqDerefAliases attribute
is one of never, finding, searching, or always, denoting how aliases will be processed during the search.
The reqAttrsOnly attribute is a Boolean value showing TRUE if only attribute names were requested, or
FALSE if attributes and their values were requested. The reqFilter attribute carries the filter used in
the search request. The reqAttr attribute lists the requested attributes if specific attributes were
requested. The reqEntries attribute is the integer count of how many entries were returned by this
search request. The reqSizeLimit and reqTimeLimit attributes indicate what limits were requested on the
search operation.
( 1.3.6.1.4.1.4203.666.11.5.2.12
NAME 'auditExtended'
DESC 'Extended operation'
SUP auditObject STRUCTURAL
MAY reqData )
The Extended class represents an LDAP Extended Operation. As noted above, the actual OID of the operation
is included in the reqType attribute of the parent class. If any optional data was provided with the
request, it will be contained in the reqData attribute as an uninterpreted octet string.
NOTES
The Access Log implemented by this overlay may be used for a variety of other tasks, e.g. as a ChangeLog
for a replication mechanism, as well as for security/audit logging purposes.
FILES
/etc/ldap/slapd.conf
default slapd configuration file
SEE ALSO
slapd.conf(5), slapd-config(5).
ACKNOWLEDGEMENTS
This module was written in 2005 by Howard Chu of Symas Corporation.
OpenLDAP 2.6.7+dfsg-1~exp1ubuntu8.2 2024/01/29 SLAPO-ACCESSLOG(5)