NAME

       snd_mss — Microsoft Sound System ISA PnP/non-PnP bridge device driver

SYNOPSIS

       To compile this driver into the kernel, place the following lines in your kernel configuration file:

             device sound
             device snd_mss

       Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

             snd_mss_load="YES"

       Non-PnP cards require the following lines in device.hints(5):

             hint.pcm.0.at="isa"
             hint.pcm.0.irq="10"
             hint.pcm.0.drq="1"
             hint.pcm.0.flags="0x0"

DESCRIPTION

       The  snd_mss  bridge  driver  allows the generic audio driver, sound(4), to attach to the supported audio
       devices.

HARDWARE

       The snd_mss driver supports the following audio devices:

       •   AD1845
       •   AD1848
       •   Aztech 2320
       •   CMedia CMI8330
       •   Crystal Semiconductor CS4231
       •   Crystal Semiconductor CS4232
       •   Crystal Semiconductor CS4234
       •   Crystal Semiconductor CS4235
       •   Crystal Semiconductor CS4236
       •   Crystal Semiconductor CS4237
       •   ENSONIQ SoundscapeVIVO ENS4081
       •   NeoMagic 256AV (non-AC97)
       •   OPTi 924
       •   OPTi 925
       •   OPTi 930
       •   OPTi 931
       •   OPTi 933
       •   Yamaha OPL-SA2
       •   Yamaha OPL-SA3

SEE ALSO

       sound(4)

HISTORY

       The snd_mss device driver first appeared in FreeBSD 2.2.6.

AUTHORS

       This manual page was written by Joel Dahl <joel@FreeBSD.org>.

Debian                                          December 1, 2005                                      SND_MSS(4)