Provided by: freebsd-manpages_12.2-1_all 
NAME
ddb — interactive kernel debugger
SYNOPSIS
In order to enable kernel debugging facilities include:
options KDB
options DDB
To prevent activation of the debugger on kernel panic(9):
options KDB_UNATTENDED
In order to print a stack trace of the current thread on the console for a panic:
options KDB_TRACE
To print the numerical value of symbols in addition to the symbolic representation, define:
options DDB_NUMSYM
To enable the gdb(1) backend, so that remote debugging with kgdb(1) is possible, include:
options GDB
DESCRIPTION
The ddb kernel debugger is an interactive debugger with a syntax inspired by gdb(1). If linked into the
running kernel, it can be invoked locally with the ‘debug’ keymap(5) action. The debugger is also
invoked on kernel panic(9) if the debug.debugger_on_panic sysctl(8) MIB variable is set non-zero, which
is the default unless the KDB_UNATTENDED option is specified.
The current location is called dot. The dot is displayed with a hexadecimal format at a prompt. The
commands examine and write update dot to the address of the last line examined or the last location
modified, and set next to the address of the next location to be examined or changed. Other commands do
not change dot, and set next to be the same as dot.
The general command syntax is: command[/modifier] [addr][,count]
A blank line repeats the previous command from the address next with count 1 and no modifiers.
Specifying addr sets dot to the address. Omitting addr uses dot. A missing count is taken to be 1 for
printing commands or infinity for stack traces. A count of -1 is equivalent to a missing count. Options
that are supplied but not supported by the given command are usually ignored.
The ddb debugger has a pager feature (like the more(1) command) for the output. If an output line
exceeds the number set in the lines variable, it displays “--More--” and waits for a response. The valid
responses for it are:
SPC one more page
RET one more line
q abort the current command, and return to the command input mode
Finally, ddb provides a small (currently 10 items) command history, and offers simple emacs-style command
line editing capabilities. In addition to the emacs control keys, the usual ANSI arrow keys may be used
to browse through the history buffer, and move the cursor within the current line.
COMMANDS
examine[/AISabcdghilmorsuxz ...] [addr][,count]
x[/AISabcdghilmorsuxz ...] [addr][,count]
Display the addressed locations according to the formats in the modifier. Multiple modifier
formats display multiple locations. If no format is specified, the last format specified for
this command is used.
The format characters are:
b look at by bytes (8 bits)
h look at by half words (16 bits)
l look at by long words (32 bits)
g look at by quad words (64 bits)
a print the location being displayed
A print the location with a line number if possible
x display in unsigned hex
z display in signed hex
o display in unsigned octal
d display in signed decimal
u display in unsigned decimal
r display in current radix, signed
c display low 8 bits as a character. Non-printing characters are displayed as an octal
escape code (e.g., ‘\000’).
s display the null-terminated string at the location. Non-printing characters are
displayed as octal escapes.
m display in unsigned hex with character dump at the end of each line. The location is
also displayed in hex at the beginning of each line.
i display as an instruction
I display as an instruction with possible alternate formats depending on the machine. On
i386, this selects the alternate format for the instruction decoding (16 bits in a 32-bit
code segment and vice versa).
S display a symbol name for the pointer stored at the address
xf Examine forward: execute an examine command with the last specified parameters to it except that
the next address displayed by it is used as the start address.
xb Examine backward: execute an examine command with the last specified parameters to it except that
the last start address subtracted by the size displayed by it is used as the start address.
print[/acdoruxz]
p[/acdoruxz]
Print addrs according to the modifier character (as described above for examine). Valid formats
are: a, x, z, o, d, u, r, and c. If no modifier is specified, the last one specified to it is
used. The argument addr can be a string, in which case it is printed as it is. For example:
print/x "eax = " $eax "\necx = " $ecx "\n"
will print like:
eax = xxxxxx
ecx = yyyyyy
write[/bhl] addr expr1 [expr2 ...]
w[/bhl] addr expr1 [expr2 ...]
Write the expressions specified after addr on the command line at succeeding locations starting
with addr. The write unit size can be specified in the modifier with a letter b (byte), h (half
word) or l (long word) respectively. If omitted, long word is assumed.
Warning: since there is no delimiter between expressions, strange things may happen. It is best
to enclose each expression in parentheses.
set $variable [=] expr
Set the named variable or register with the value of expr. Valid variable names are described
below.
break[/u] [addr][,count]
b[/u] [addr][,count]
Set a break point at addr. If count is supplied, the continue command will not stop at this
break point on the first count - 1 times that it is hit. If the break point is set, a break
point number is printed with ‘#’. This number can be used in deleting the break point or adding
conditions to it.
If the u modifier is specified, this command sets a break point in user address space. Without
the u option, the address is considered to be in the kernel space, and a wrong space address is
rejected with an error message. This modifier can be used only if it is supported by machine
dependent routines.
Warning: If a user text is shadowed by a normal user space debugger, user space break points may
not work correctly. Setting a break point at the low-level code paths may also cause strange
behavior.
delete [addr]
d [addr]
delete #number
d #number
Delete the specified break point. The break point can be specified by a break point number with
‘#’, or by using the same addr specified in the original break command, or by omitting addr to
get the default address of dot.
watch [addr][,size]
Set a watchpoint for a region. Execution stops when an attempt to modify the region occurs. The
size argument defaults to 4. If you specify a wrong space address, the request is rejected with
an error message.
Warning: Attempts to watch wired kernel memory may cause unrecoverable error in some systems such
as i386. Watchpoints on user addresses work best.
hwatch [addr][,size]
Set a hardware watchpoint for a region if supported by the architecture. Execution stops when an
attempt to modify the region occurs. The size argument defaults to 4.
Warning: The hardware debug facilities do not have a concept of separate address spaces like the
watch command does. Use hwatch for setting watchpoints on kernel address locations only, and
avoid its use on user mode address spaces.
dhwatch [addr][,size]
Delete specified hardware watchpoint.
step[/p][,count]
s[/p][,count]
Single step count times. If the p modifier is specified, print each instruction at each step.
Otherwise, only print the last instruction.
Warning: depending on machine type, it may not be possible to single-step through some low-level
code paths or user space code. On machines with software-emulated single-stepping (e.g., pmax),
stepping through code executed by interrupt handlers will probably do the wrong thing.
continue[/c]
c[/c] Continue execution until a breakpoint or watchpoint. If the c modifier is specified, count
instructions while executing. Some machines (e.g., pmax) also count loads and stores.
Warning: when counting, the debugger is really silently single-stepping. This means that single-
stepping on low-level code may cause strange behavior.
until[/p]
Stop at the next call or return instruction. If the p modifier is specified, print the call
nesting depth and the cumulative instruction count at each call or return. Otherwise, only print
when the matching return is hit.
next[/p]
match[/p]
Stop at the matching return instruction. If the p modifier is specified, print the call nesting
depth and the cumulative instruction count at each call or return. Otherwise, only print when
the matching return is hit.
trace[/u] [pid | tid][,count]
t[/u] [pid | tid][,count]
where[/u] [pid | tid][,count]
bt[/u] [pid | tid][,count]
Stack trace. The u option traces user space; if omitted, trace only traces kernel space. The
optional argument count is the number of frames to be traced. If count is omitted, all frames
are printed.
Warning: User space stack trace is valid only if the machine dependent code supports it.
search[/bhl] addr value [mask][,count]
Search memory for value. The optional count argument limits the search.
findstack addr
Prints the thread address for a thread kernel-mode stack of which contains the specified address.
If the thread is not found, search the thread stack cache and prints the cached stack address.
Otherwise, prints nothing.
show all procs[/a]
ps[/a] Display all process information. The process information may not be shown if it is not supported
in the machine, or the bottom of the stack of the target process is not in the main memory at
that time. The a modifier will print command line arguments for each process.
show all trace
alltrace
Show a stack trace for every thread in the system.
show all ttys
Show all TTY's within the system. Output is similar to pstat(8), but also includes the address
of the TTY structure.
show all vnets
Show the same output as "show vnet" does, but lists all virtualized network stacks within the
system.
show allchains
Show the same information like "show lockchain" does, but for every thread in the system.
show alllocks
Show all locks that are currently held. This command is only available if witness(4) is included
in the kernel.
show allpcpu
The same as "show pcpu", but for every CPU present in the system.
show allrman
Show information related with resource management, including interrupt request lines, DMA request
lines, I/O ports, I/O memory addresses, and Resource IDs.
show apic
Dump data about APIC IDT vector mappings.
show breaks
Show breakpoints set with the "break" command.
show bio addr
Show information about the bio structure struct bio present at addr. See the sys/bio.h header
file and g_bio(9) for more details on the exact meaning of the structure fields.
show buffer addr
Show information about the buf structure struct buf present at addr. See the sys/buf.h header
file for more details on the exact meaning of the structure fields.
show callout addr
Show information about the callout structure struct callout present at addr.
show cbstat
Show brief information about the TTY subsystem.
show cdev
Without argument, show the list of all created cdev's, consisting of devfs node name and struct
cdev address. When address of cdev is supplied, show some internal devfs state of the cdev.
show conifhk
Lists hooks currently waiting for completion in run_interrupt_driven_config_hooks().
show cpusets
Print numbered root and assigned CPU affinity sets. See cpuset(2) for more details.
show cyrixreg
Show registers specific to the Cyrix processor.
show devmap
Prints the contents of the static device mapping table. Currently only available on the ARM
architecture.
show domain addr
Print protocol domain structure struct domain at address addr. See the sys/domain.h header file
for more details on the exact meaning of the structure fields.
show ffs [addr]
Show brief information about ffs mount at the address addr, if argument is given. Otherwise,
provides the summary about each ffs mount.
show file addr
Show information about the file structure struct file present at address addr.
show files
Show information about every file structure in the system.
show freepages
Show the number of physical pages in each of the free lists.
show geom [addr]
If the addr argument is not given, displays the entire GEOM topology. If addr is given, displays
details about the given GEOM object (class, geom, provider or consumer).
show idt
Show IDT layout. The first column specifies the IDT vector. The second one is the name of the
interrupt/trap handler. Those functions are machine dependent.
show igi_list addr
Show information about the IGMP structure struct igmp_ifsoftc present at addr.
show inodedeps [addr]
Show brief information about each inodedep structure. If addr is given, only inodedeps belonging
to the fs located at the supplied address are shown.
show inpcb addr
Show information on IP Control Block struct in_pcb present at addr.
show intr
Dump information about interrupt handlers.
show intrcnt
Dump the interrupt statistics.
show irqs
Show interrupt lines and their respective kernel threads.
show jails
Show the list of jail(8) instances. In addition to what jls(8) shows, also list kernel internal
details.
show lapic
Show information from the local APIC registers for this CPU.
show lock addr
Show lock structure. The output format is as follows:
class:
Class of the lock. Possible types include mutex(9), rmlock(9), rwlock(9), sx(9).
name: Name of the lock.
flags:
Flags passed to the lock initialization function. flags values are lock class specific.
state:
Current state of a lock. state values are lock class specific.
owner:
Lock owner.
show lockchain addr
Show all threads a particular thread at address addr is waiting on based on non-spin locks.
show lockedbufs
Show the same information as "show buf", but for every locked struct buf object.
show lockedvnods
List all locked vnodes in the system.
show locks
Prints all locks that are currently acquired. This command is only available if witness(4) is
included in the kernel.
show locktree
show malloc
Prints malloc(9) memory allocator statistics. The output format is as follows:
Type Specifies a type of memory. It is the same as a description string used while
defining the given memory type with MALLOC_DECLARE(9).
InUse Number of memory allocations of the given type, for which free(9) has not been
called yet.
MemUse Total memory consumed by the given allocation type.
Requests Number of memory allocation requests for the given memory type.
The same information can be gathered in userspace with “vmstat -m”.
show map[/f] addr
Prints the VM map at addr. If the f modifier is specified the complete map is printed.
show msgbuf
Print the system's message buffer. It is the same output as in the “dmesg” case. It is useful
if you got a kernel panic, attached a serial cable to the machine and want to get the boot
messages from before the system hang.
show mount
Displays short info about all currently mounted file systems.
show mount addr
Displays details about the given mount point.
show object[/f] addr
Prints the VM object at addr. If the f option is specified the complete object is printed.
show panic
Print the panic message if set.
show page
Show statistics on VM pages.
show pageq
Show statistics on VM page queues.
show pciregs
Print PCI bus registers. The same information can be gathered in userspace by running “pciconf
-lv”.
show pcpu
Print current processor state. The output format is as follows:
cpuid Processor identifier.
curthread Thread pointer, process identifier and the name of the process.
curpcb Control block pointer.
fpcurthread FPU thread pointer.
idlethread Idle thread pointer.
APIC ID CPU identifier coming from APIC.
currentldt LDT pointer.
spin locks held Names of spin locks held.
show pgrpdump
Dump process groups present within the system.
show proc [addr]
If no [addr] is specified, print information about the current process. Otherwise, show
information about the process at address addr.
show procvm
Show process virtual memory layout.
show protosw addr
Print protocol switch structure struct protosw at address addr.
show registers[/u]
Display the register set. If the u modifier is specified, it displays user registers instead of
kernel registers or the currently saved one.
Warning: The support of the u modifier depends on the machine. If not supported, incorrect
information will be displayed.
show rman addr
Show resource manager object struct rman at address addr. Addresses of particular pointers can
be gathered with "show allrman" command.
show rtc
Show real time clock value. Useful for long debugging sessions.
show sleepchain
Deprecated. Now an alias for show lockchain.
show sleepq
show sleepqueue
Both commands provide the same functionality. They show sleepqueue struct sleepqueue structure.
Sleepqueues are used within the FreeBSD kernel to implement sleepable synchronization primitives
(thread holding a lock might sleep or be context switched), which at the time of writing are:
condvar(9), sx(9) and standard msleep(9) interface.
show sockbuf addr
show socket addr
Those commands print struct sockbuf and struct socket objects placed at addr. Output consists of
all values present in structures mentioned. For exact interpretation and more details, visit
sys/socket.h header file.
show sysregs
Show system registers (e.g., cr0-4 on i386.) Not present on some platforms.
show tcpcb addr
Print TCP control block struct tcpcb lying at address addr. For exact interpretation of output,
visit netinet/tcp.h header file.
show thread [addr]
If no addr is specified, show detailed information about current thread. Otherwise, information
about thread at addr is printed.
show threads
Show all threads within the system. Output format is as follows:
First column Thread identifier (TID)
Second column Thread structure address
Third column Backtrace.
show tty addr
Display the contents of a TTY structure in a readable form.
show turnstile addr
Show turnstile struct turnstile structure at address addr. Turnstiles are structures used within
the FreeBSD kernel to implement synchronization primitives which, while holding a specific type
of lock, cannot sleep or context switch to another thread. Currently, those are: mutex(9),
rwlock(9), rmlock(9).
show uma
Show UMA allocator statistics. Output consists five columns:
Zone Name of the UMA zone. The same string that was passed to uma_zcreate(9) as a
first argument.
Size Size of a given memory object (slab).
Used Number of slabs being currently used.
Free Number of free slabs within the UMA zone.
Requests Number of allocations requests to the given zone.
The very same information might be gathered in the userspace with the help of “vmstat -z”.
show unpcb addr
Shows UNIX domain socket private control block struct unpcb present at the address addr.
show vmochk
Prints, whether the internal VM objects are in a map somewhere and none have zero ref counts.
show vmopag
This is supposed to show physical addresses consumed by a VM object. Currently, it is not
possible to use this command when witness(4) is compiled in the kernel.
show vnet addr
Prints virtualized network stack struct vnet structure present at the address addr.
show vnode [addr]
Prints vnode struct vnode structure lying at [addr]. For the exact interpretation of the output,
look at the sys/vnode.h header file.
show vnodebufs addr
Shows clean/dirty buffer lists of the vnode located at addr.
show vpath addr
Walk the namecache to lookup the pathname of the vnode located at addr.
show watches
Displays all watchpoints. Shows watchpoints set with "watch" command.
show witness
Shows information about lock acquisition coming from the witness(4) subsystem.
gdb Toggles between remote GDB and DDB mode. In remote GDB mode, another machine is required that
runs gdb(1) using the remote debug feature, with a connection to the serial console port on the
target machine. Currently only available on the i386 architecture.
halt Halt the system.
kill sig pid
Send signal sig to process pid. The signal is acted on upon returning from the debugger. This
command can be used to kill a process causing resource contention in the case of a hung system.
See signal(3) for a list of signals. Note that the arguments are reversed relative to kill(2).
reboot [seconds]
reset [seconds]
Hard reset the system. If the optional argument seconds is given, the debugger will wait for
this long, at most a week, before rebooting.
help Print a short summary of the available commands and command abbreviations.
capture on
capture off
capture reset
capture status
ddb supports a basic output capture facility, which can be used to retrieve the results of
debugging commands from userspace using sysctl(3). capture on enables output capture; capture
off disables capture. capture reset will clear the capture buffer and disable capture. capture
status will report current buffer use, buffer size, and disposition of output capture.
Userspace processes may inspect and manage ddb capture state using sysctl(8):
debug.ddb.capture.bufsize may be used to query or set the current capture buffer size.
debug.ddb.capture.maxbufsize may be used to query the compile-time limit on the capture buffer
size.
debug.ddb.capture.bytes may be used to query the number of bytes of output currently in the
capture buffer.
debug.ddb.capture.data returns the contents of the buffer as a string to an appropriately
privileged process.
This facility is particularly useful in concert with the scripting and textdump(4) facilities,
allowing scripted debugging output to be captured and committed to disk as part of a textdump for
later analysis. The contents of the capture buffer may also be inspected in a kernel core dump
using kgdb(1).
run
script
scripts
unscript
Run, define, list, and delete scripts. See the “SCRIPTING” section for more information on the
scripting facility.
textdump dump
textdump set
textdump status
textdump unset
Use the textdump dump command to immediately perform a textdump. More information may be found
in textdump(4). The textdump set command may be used to force the next kernel core dump to be a
textdump rather than a traditional memory dump or minidump. textdump status reports whether a
textdump has been scheduled. textdump unset cancels a request to perform a textdump as the next
kernel core dump.
VARIABLES
The debugger accesses registers and variables as $name. Register names are as in the “show registers”
command. Some variables are suffixed with numbers, and may have some modifier following a colon
immediately after the variable name. For example, register variables can have a u modifier to indicate
user register (e.g., “$eax:u”).
Built-in variables currently supported are:
radix Input and output radix.
maxoff Addresses are printed as “symbol+offset” unless offset is greater than maxoff.
maxwidth The width of the displayed line.
lines The number of lines. It is used by the built-in pager. Setting it to 0 disables paging.
tabstops Tab stop width.
workxx Work variable; xx can take values from 0 to 31.
EXPRESSIONS
Most expression operators in C are supported except ‘~’, ‘^’, and unary ‘&’. Special rules in ddb are:
Identifiers The name of a symbol is translated to the value of the symbol, which is the address of the
corresponding object. ‘.’ and ‘:’ can be used in the identifier. If supported by an object
format dependent routine, [filename:]func:lineno, [filename:]variable, and [filename:]lineno
can be accepted as a symbol.
Numbers Radix is determined by the first two letters: ‘0x’: hex, ‘0o’: octal, ‘0t’: decimal;
otherwise, follow current radix.
. dot
+ next
.. address of the start of the last line examined. Unlike dot or next, this is only changed by
examine or write command.
' last address explicitly specified.
$variable Translated to the value of the specified variable. It may be followed by a ‘:’ and
modifiers as described above.
a#b A binary operator which rounds up the left hand side to the next multiple of right hand
side.
*expr Indirection. It may be followed by a ‘:’ and modifiers as described above.
SCRIPTING
ddb supports a basic scripting facility to allow automating tasks or responses to specific events. Each
script consists of a list of DDB commands to be executed sequentially, and is assigned a unique name.
Certain script names have special meaning, and will be automatically run on various ddb events if scripts
by those names have been defined.
The script command may be used to define a script by name. Scripts consist of a series of ddb commands
separated with the ‘;’ character. For example:
script kdb.enter.panic=bt; show pcpu
script lockinfo=show alllocks; show lockedvnods
The scripts command lists currently defined scripts.
The run command execute a script by name. For example:
run lockinfo
The unscript command may be used to delete a script by name. For example:
unscript kdb.enter.panic
These functions may also be performed from userspace using the ddb(8) command.
Certain scripts are run automatically, if defined, for specific ddb events. The follow scripts are run
when various events occur:
kdb.enter.acpi The kernel debugger was entered as a result of an acpi(4) event.
kdb.enter.bootflags The kernel debugger was entered at boot as a result of the debugger boot flag being
set.
kdb.enter.break The kernel debugger was entered as a result of a serial or console break.
kdb.enter.cam The kernel debugger was entered as a result of a CAM(4) event.
kdb.enter.mac The kernel debugger was entered as a result of an assertion failure in the
mac_test(4) module of the TrustedBSD MAC Framework.
kdb.enter.ndis The kernel debugger was entered as a result of an ndis(4) breakpoint event.
kdb.enter.netgraph The kernel debugger was entered as a result of a netgraph(4) event.
kdb.enter.panic panic(9) was called.
kdb.enter.powerfail The kernel debugger was entered as a result of a powerfail NMI on the sparc64
platform.
kdb.enter.powerpc The kernel debugger was entered as a result of an unimplemented interrupt type on
the powerpc platform.
kdb.enter.sysctl The kernel debugger was entered as a result of the debug.kdb.enter sysctl being set.
kdb.enter.trapsig The kernel debugger was entered as a result of a trapsig event on the sparc64
platform.
kdb.enter.unionfs The kernel debugger was entered as a result of an assertion failure in the union
file system.
kdb.enter.unknown The kernel debugger was entered, but no reason has been set.
kdb.enter.vfslock The kernel debugger was entered as a result of a VFS lock violation.
kdb.enter.watchdog The kernel debugger was entered as a result of a watchdog firing.
kdb.enter.witness The kernel debugger was entered as a result of a witness(4) violation.
In the event that none of these scripts is found, ddb will attempt to execute a default script:
kdb.enter.default The kernel debugger was entered, but a script exactly matching the reason for
entering was not defined. This can be used as a catch-all to handle cases not
specifically of interest; for example, kdb.enter.witness might be defined to have
special handling, and kdb.enter.default might be defined to simply panic and reboot.
HINTS
On machines with an ISA expansion bus, a simple NMI generation card can be constructed by connecting a
push button between the A01 and B01 (CHCHK# and GND) card fingers. Momentarily shorting these two
fingers together may cause the bridge chipset to generate an NMI, which causes the kernel to pass control
to ddb. Some bridge chipsets do not generate a NMI on CHCHK#, so your mileage may vary. The NMI allows
one to break into the debugger on a wedged machine to diagnose problems. Other bus' bridge chipsets may
be able to generate NMI using bus specific methods. There are many PCI and PCIe add-in cards which can
generate NMI for debugging. Modern server systems typically use IPMI to generate signals to enter the
debugger. The devel/ipmitool port can be used to send the chassis power diag command which delivers an
NMI to the processor. Embedded systems often use JTAG for debugging, but rarely use it in combination
with ddb.
For serial consoles, you can enter the debugger by sending a BREAK condition on the serial line if
options BREAK_TO_DEBUGGER is specified in the kernel. Most terminal emulation programs can send a break
sequence with a special key sequence or via a menu item. However, in some setups, sending the break can
be difficult to arrange or happens spuriously, so if the kernel contains options ALT_BREAK_TO_DEBUGGER
then the sequence of CR TILDE CTRL-B enters the debugger; CR TILDE CTRL-P causes a panic instead of
entering the debugger; and CR TILDE CTRL-R causes an immediate reboot. In all the above sequences, CR is
a Carriage Return and is usually sent by hitting the Enter or Return key. TILDE is the ASCII tilde
character (~). CTRL-x is Control x created by hitting the control key and then x and then releasing
both.
The break to enter the debugger behavior may be enabled at run-time by setting the sysctl(8)
debug.kdb.break_to_debugger to 1. The alternate sequence to enter the debugger behavior may be enabled
at run-time by setting the sysctl(8) debug.kdb.alt_break_to_debugger to 1. The debugger may be entered
by setting the sysctl(8) debug.kdb.enter to 1.
FILES
Header files mentioned in this manual page can be found below /usr/include directory.
- sys/buf.h
- sys/domain.h
- netinet/in_pcb.h
- sys/socket.h
- sys/vnode.h
SEE ALSO
gdb(1), kgdb(1), acpi(4), CAM(4), mac_test(4), ndis(4), netgraph(4), textdump(4), witness(4), ddb(8),
sysctl(8), panic(9)
HISTORY
The ddb debugger was developed for Mach, and ported to 386BSD 0.1. This manual page translated from
man(7) macros by Garrett Wollman.
Robert N. M. Watson added support for ddb output capture, textdump(4) and scripting in FreeBSD 7.1.
Debian September 7, 2018 DDB(4)